Commit Graph
2714 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 f35f06d98a kernel: a revolution that is no analytic surface goes into SMLib as its B-spline
The analytic mapping refused every revolution that is none of SMLib's plane, cylinder, cone,
sphere or torus (a profile of any other curve, a placement that is no rigid motion), which
now also kept those faces from kernel-smlib's exact rational B-spline import (da7ccba9). Such a
face now stays a revolution, so the import sends it as its B-spline; the analytic surfaces are
still taken wherever they fit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 d672cfa013 kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 ff0f7ccfa1 kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
The record of a truck body is built to the body's working tolerance (1e-6 of its size, at
least 1e-5 mm), and truck's offsets and blends leave some edges a few times farther than that
from a face they bound: no pcurve fits, so the record and every SMLib boolean on the body
failed ("pcurve of loop 0 use 0 ...: the curve at 0 lies 3.2e-5 mm off the surface" in a
shelled revolve of the robustness generator). The record for SMLib now retries at ten and a
hundred times the working tolerance for the body, its edges and vertices before refusing; the
saved native body keeps the working tolerance. Robustness seed 64 (a filleted extrusion
joined to a cylinder), refused this way before, now builds as truck does to 1.6e-6 of its
volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 94c1598259 kernel: SMLib's round faces decode as truck's own revolutions are laid out
An SMLib cylinder, cone, sphere or torus decoded as a truck revolution with its parameters
swapped (angle, profile), which truck's own revolutions never have. The tessellator then put a
cone's apex at the wrong angle: a drill point through SMLib and back meshed 41 % too large and
oracle cases 18, 55 and 56 measured wrong areas and volumes. The profile now runs against the
record's v, unswapped, which keeps the record's natural normal and truck's (profile, angle).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 00e43aacce kernel: an operand SMLib's check refuses goes through SMLib's healer
Truck's bodies are trusted into SMLib as given, but some miss SMLib's rules by a little (an
edge's vertex 4.4e-5 mm off it against a tolerance of 3.3e-5 after a truck operation), and
every boolean on them was refused by the check of its result. An operand whose trusted import
fails SMLib's check is imported again through SMLib's healer, and the healed body is used only
where SMLib then finds it valid; its numbering is checked against the record as before, so a
heal that renumbers leaves the result without history rather than with a wrong one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 e35b4d744e kernel: revolutions of a line square to the axis go into SMLib as planes
A revolve's flat ends (a line square to the axis turned about it) were refused, so any
revolved profile off the axis could not reach SMLib (oracle case 29). Such a face now goes as
SMLib's plane square to the axis, its range the box round the sector the line sweeps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 c344801cc2 kernel: note that the engine's and CLI's smlib features reach SOLIDCRAFT_BOOLEANS
kernel-smlib already gives solidcraft-engine and solidcraft-cli an `smlib` feature (for the
regression rig); the note on SOLIDCRAFT_BOOLEANS now says they are how the oracle, the naming
corpus and the robustness goldens run their booleans through SMLib.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 1980f9743f kernel: SMLib's export keeps every face of a void's shell
The export takes a closed boundary's faces from the side in the empty region and skipped
every use there that is not `same`, a rule meant only for a sheet (a shell that is its own
mate). It tested the chosen side against the mate instead of the shell against itself, so a
cavity's shell, taken from the void's side, lost its faces whose uses run opposite to their
surfaces: "a face no shell uses" for every cut that leaves a void.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 640d3d9ea5 kernel: truck's extruded circles go into SMLib as its cylinders
Truck extrudes a circle into rational splines, so every truck cylinder reached SMLib as
splines, and a box cut by one came back with edges 0.78 mm off their faces (SMLib's own check
refused it). A rational spline that is a circular arc swept straight along its axis (one
direction linear, the second row the first moved by one vector square to the arc's circle,
weights alike) now goes as SMLib's cylinder with the face's range on it.

The revolution mapping becomes one module for both (import/analytic.rs): each candidate face's
analytic surface is checked against the record's at 25 points of its domain, each point placed
on the analytic surface by its own (u, v), and turned over where the normals disagree.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 b27751d43f kernel: planes go into SMLib as its planes; analytic angles start at zero
Truck's planes run through three points, their axes the face's sides, so the SMLib import sent
every truck planar face as a bilinear NURBS patch: SMLib then intersected splines where it has
planes. A plane on any axes now goes as SMLib's plane on unit axes along U and at right angles
in the plane, its range the record's domain on those axes (a face's range need not be tight;
SMLib rebuilds an analytic face's trims from its edges).

A revolution's analytic frame turns to the face's first angle so u starts at 0: SMLib's check
refuses a cylinder whose range ends past 360°. A failed SMLib check of a boolean's result now
says whether an operand already fails it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 d271add1ad kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Truck holds every round surface as a placed revolution, and a body SMLib made comes back from
truck that way too, so the SMLib import refused spheres, tori and any second boolean on a
first one's result. The import now turns each revolution of a line along or through the axis,
or of a circle centred on it or in a plane through it, under a rigid placement, into SMLib's
analytic surface: the face's range mapped from the revolution's parameters (angles moved into
the first turn: SMLib's torus breaks on a tube range below zero), checked against the
revolution at 25 points, and the face turned over (loops reversed, shell uses flipped) where
the analytic normal runs the other way. Other revolutions are still refused.

A result body's order is checked by each face's boundary edges as well as its identity:
Body::new rephases revolved faces onto new faces with the same edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 5238840bc8 kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
With the `smlib` feature, SOLIDCRAFT_BOOLEANS=smlib (read once per process, default truck)
sends every kernel::boolean through SMLib: each operand's schema 4 record imported and tagged
as operand 0 or 1, SmBrep's boolean, SMLib's check at every level, the result exported and
decoded (with its geometry check). A result either check refuses is an error. The setting
naming SMLib in a build without it, or anything unknown, fails every boolean instead of
quietly running truck, so a comparison never compares truck with itself.

The history is SMLib's tags renumbered into Body::history's index spaces. The export now
reports where each SMLib face and edge lands in canonical order (its arrays follow
SmBrep::GetFaces/GetEdges, the order the tags use). The result's order is checked against the
decoded solid by face and edge identity, the operands' by re-exporting the imported body and
comparing its numbering with the record's; where either differs the result has no history
rather than a wrong one. The result gets the operands' regularization protection and planar
roles as truck's does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 f7336497f9 AGENTS.md: the kernel does geometry, sugar lives above it
The owner's rule for the kernel-smlib branch: the kernel runs exact
operations and refuses what it cannot do exactly; sizes, standards tables,
defaults, pre-checks and conveniences live in the engine and doc. Threads
as the example: a helical sweep in the kernel, while the size table, the
off-size refusal and multi-start threads are sugar.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 54542890d1 kernel: hold every display-plan triangle to the chord tolerance
Only the Delaunay layout checked its triangles against the surface. The
grid divides each parameter direction within the tolerance, but on a
doubly curved surface the two sags add up in a cell's middle, along its
diagonal (SMLib torus 1.16x at 0.01, truck sphere 1.23x at 0.1, truck torus
1.40x at 0.01); the patches round a pocket cut into a sphere at its pole
fan out from the cut with no check at all (4.34x at 0.1, 1.90x at 0.01).

Every curved face's finished triangulation now goes through tess::sag:
each triangle is measured at its centroid and at the middle of each side
inside the face, across the surface (along the normal at the point of the
same parameters, which near a pole need not be the nearest), and the side
that leaves the surface most is split, both triangles on it together, so
the face stays conforming. Boundary sides are never split: they carry the
edges' own nodes, shared with the neighbouring face. At a pole the free
parameter of a midpoint comes from the other corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 b90a5851c5 kernel: open a half sphere's loop at its pole, so its seam closes
A sphere from SMLib cut through its centre keeps one face bounded by its
rim and by its seam from the pole up to the rim, used both ways. Unwrapped
along the loop, both runs of the seam landed on one parameter line and the
loop came out one period short, so the planner took it for a face winding
round the sphere and cut it along a new line of its own. The two seam runs
stayed inside that strip as a slit of zero width, triangulated on each side
separately: open edges along the seam up to the rim (gaps up to 9.5e-3 mm
at chord 0.1), a zero-angle triangle and a non-manifold edge at the pole.

Such a loop is now unwrapped from the node after the pole round to it and
started at the node before it: the seam's uses lie a period apart on either
side of the face's parameter box, which then meshes like any sphere patch,
both uses on the seam's own nodes. It is kept as it was unless the opened
loop spans at most a period with a positive area and no longer winds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 c992630e10 ATTRIBUTION.md: rows for the kernel rig's STEP import fixtures
Eight are hand-written synthetic files (MIT OR Apache-2.0). The other eight are byte copies of
CC0 files from tests/step-conformance and say so. Each row names the issue its case comes from.
cargo xtask assets passes again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 de6633b9c6 smlib: pin the fork's SSI fixes (1499681); the corpus passes 111 of 119
SMLIB_REV moves to tangency-labs/smlib capi-solidcraft 1499681, eight SMLib
commits for surface/surface intersection: an empty curve is no longer
reverse-traced (SM_ERR_NULL_POINTER), tangent curves are traced once, curves
split at singular crossings, interior tangential contact points, tangential
curves and branches through tangent nodes, small loops above tolerance, and
high-order contact curves covered across their band. The corpus test's pass
list grows from 81 to 111 cases; the 8 still failing are all below SMLib's
1e-5 zone tolerance (angles 1e-6..1e-8, offsets 1e-7, loops of 2e-6 or less).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 f8b48d0e4d smlib: pin the fork at 70e1bf5 (capi: surface/surface intersection)
capi-solidcraft with smlib_surface_* and smlib_ssi. The C ABI version is
unchanged (2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 201ca9a81e smlib tests: score SMLib's GlobalSurfaceIntersect on the SSI corpus
With the native feature, smlib_global_intersect_at_1e_6 builds both
surfaces of every case through solidcraft_smlib::ssi, intersects them
at approximation tolerance 1e-6 with the corpus runner's 4001 samples
per curve, turns the answer into what the runner writes for gsi, and
scores it. It asserts the exact set of passing cases (81, as score.py
grades the runner: 81 PASS, 25 INCOMPLETE, 11 WRONG TOPOLOGY, 2 ERROR),
so a regression and an improvement both fail until the list changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 880523514a smlib: surface/surface intersection wrapper (smlib_surface_*, smlib_ssi)
ffi/ssi.rs declares the C API's SSI block; ssi.rs wraps it: Surface
(plane, cylinder, cone, sphere, torus, NURBS, with the SSI corpus's
fields, angles in degrees), Method (Global, Advanced, Basic) and
intersect(), which returns every curve's type, UV flags, deviation,
interval and samples (xyz, uv on each surface, each surface at its uv)
and the isolated points. Without the native feature every call returns
NotBuilt.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 3c1fbf4c9d smlib tests: SSI corpus scorer and its parity with score.py
ssi_score::score_case grades an engine result (sampled curves with xyz,
uv1, uv2, both surfaces at the UV samples and the curve type; points;
status; or a crash) against a corpus case: CRASH, ERROR, INCOMPLETE,
WRONG TOPOLOGY, INACCURATE or PASS, with score.py's flags and numbers.

ssi_corpus.rs checks every case parses, every NURBS surface lies on its
truth, the truth itself passes (bar unsplit singular points), and the
verdict rules. The ignored parity test scores the corpus runner's raw
outputs and compares with score.py: 119/119 identical verdicts and
flags for SMLib GlobalSurfaceIntersect at 1e-6 (81 PASS).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 6dbda8ecf1 smlib tests: SSI scorer geometry (truth distances, polyline sets)
Test-support port of the parts of the SSI corpus's ssi_geom.py and
score.py the scorer needs: exact distances to the implicit truths, the
Gauss-Newton closest point on traced param patches, B-spline/NURBS
evaluation of the case surfaces, and score.py's segment-hash polyline
set, polyline distance, components, free ends and topology signature,
following numpy's arithmetic order.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 1edeb2a6f7 tests: SSI corpus fixtures (119 cases with exact truth)
The 119 surface/surface intersection cases of jyviko/ssi-corpus (b04c8a6,
MIT OR Apache-2.0), gzip-compressed, with its licence texts and a README
on the case format and the scoring rules. The 25 y23 cases come from
Yang, Jia & Yan 2023 (ACM TOG 42(6) Art. 211, CC-BY 4.0); both are in
ATTRIBUTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 17eafa2d48 solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
A PlacedRevolution record goes to SMLib as its exact rational B-spline
surface: each profile control point swept round the axis by a full circle of
four rational quadratic quarters starting at the face's first angle, then
mapped by the placement. The circle's parameter is not the angle, so the
face's angle range is converted pointwise and its pcurves are not carried
(SMLib rebuilds the trims). Where the placement mirrors, the record's natural
normal is the opposite of the map's, so the directions swap.

The B-spline matches the record's surface to 1e-12 with the same normal,
forward or not, mirrored or not; truck's sphere and torus now reach SMLib
with their analytic volume (1e-6) as manifold solids.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 3feb9ba2c9 kernel-cases: tessellation cases from mesh-hole reports grade watertightness
784, 1753 and the two 1666 lofts came from holes in exported meshes, so
each now also requires a mesh with no open or over-shared edge. On today's
kernel 784 and both lofts are watertight; 1753's bowl, its rim cut by a
cylinder, still has 3 open mesh edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 8cb976b9b2 kernel-cases: watertight checks the display mesh, welding vertices by distance
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
  their own and leaves T-junctions on the edges they share with neighbours. It now checks the
  display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
  across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 e809edd338 kernel-cases: thread cases that are slow by nature get 600 s
2822, 3952 and 4149 cut long modelled threads into filleted or revolved
bodies; each takes minutes on today's kernel, so they get timeout_s 600
instead of the default 180.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 58ce14f45f kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
  thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
  and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 ae8809a4b4 docs/kernel-cases.md: first full run of the kernel regression rig
372 cases. The default kernel passes 232. smlib reports "not supported yet" for every case
until the SMLib boolean switch lands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 c87bb72f0f kernel-cases: coverage by kind of source, and the ring join of #2357
- tests/kernel-cases/sources.json gives each looked-at number's kind: an open or closed issue, a
  merged PR, one of the frozen truck-geometry PRs, a kernel-paused PR. The report's coverage by
  source counts how many of each were looked at, became cases or were skipped.
- crashes/2357: one join of a ring of 90 overlapping cylinder segments. The right answer is one
  closed ring body. The old kernel still panics in its intersection curves and runs past the
  timeout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 146ab740ae kernel-cases: thread fit cases say what they grade
2969's description named another product's behaviour; 1443's and 2152's
still described the refusal. Each now says the hole is drawn at the
thread's nominal size and gets the fitted thread.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 d7381a1fa7 kernel-cases: threads fit a hole or shaft off the thread's size again
Reverts 1375e905. A modelled thread fits by default: a hole too wide for it
is filled to the tap drill, a shaft too thick is turned down to the major
diameter, so the seven cases (995, 1443, 2152, 2969, 3366, 2369, 2705) go
back to expecting the fitted thread and its volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 e1575385b3 kernel-cases: a thread off its hole or shaft size is refused
A modelled thread never changes the size of the hole or shaft it is on
(#1018, #2853): one that isn't the thread's size is refused, naming the
size to use. The seven cases that expected the hole filled to the tap
drill or the shaft turned down to the major diameter (995, 1443, 2152,
2969, 3366, 2369, 2705) now expect that refusal, with its numbers worked
out from ISO 68-1 and the message in `refusal`. An opt-in fit option, if
it comes, gets cases of its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 248fee75b9 ladder: every ladder run measures one case at a time
Runs are compared with the golden's times, so a run sharing the machine between cases flags
slowdowns that are only contention (seen with --jobs 4: four cases two to ten times slower).
--jobs still overrides it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 35ebc816ba kernel-cases: a missing capability's message is the case's own text
The report already says "not supported yet" for the status; the error repeated it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 b249100eae ladder: 116 cases in 11 tiers, from primitives to a threaded, shelled housing
Tiers: primitives; booleans in the degeneracy classes (coincident and coplanar faces, edge-on-edge,
vertex-on-face, tangent along a line and a circle, near-tangent gaps and overlaps of 1e-3 and
1e-6 mm, seam and pole crossings) and cuts that end in a single line (a knife-edge wedge, a V
groove and a cylinder that pinch the part in two, a hole tangent to a face, a notch flush with an
end); line-and-arc extrudes and revolves (partial, touching the axis); spline profiles, sweeps
and lofts; holes and tapped holes (blind, drilled, counterbore, countersink, M5-M8 taps, into a
curved face, near and tangent to an edge, crossing); modelled threads (external, fine, partial,
to a shoulder, internal, into a chamfer, at a filleted shoulder); fillets (constant, tangent
chains, convex and concave, variable down to 1e-3 and to 0 at a vertex, corners with equal and
unequal radii, g2 corners); chamfers (two distances, angle, three- and two-edge corners, curved);
shells and offsets; patterns and mirrors (overlapping instances that cut a core free); and
cumulative parts.

A running part grows one tier at a time through `base` (back wall, revolved boss and slot,
spline window, tapped holes, rounds, chamfers, shell, vents), and the last case adds its thread:
it carries every tier. Answers are analytic wherever the geometry has them (Pappus, Steinmetz,
ISO 68-1 basic thread profiles, exact Gauss quadrature of Bezier profiles, inclusion-exclusion
for chamfered corners), otherwise invariants; each `method` gives the derivation, and
tools/kernel-ladder/cases.py (standard-library Python, like tools/oracle-analytic) writes them.
Capabilities SolidCraft lacks are `missing` cases: multi-start threads, thread runout lengths,
fillet corner setbacks.

The golden is the first recording on truck, each tier sorted by its time. SMLib booleans are
not on this branch yet, so the smlib column records "not supported yet" for every case.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 208c39461e ladder: cargo xtask kernel-cases --ladder, the complexity ladder's runner
The ladder orders kernel operations by complexity instead of by random goldens: a manifest
(tests/kernel-cases/ladder/ladder.json) lists tiers in order and each tier's cases in order;
every case is graded against its own answer like any rig case, and a golden
(tests/kernel-cases/ladder/golden.json) records per case and kernel the status, the commands'
time and what the kernel made. A run compares with the golden and flags slowdowns (over twice the
time and 0.25 s more), status changes and changed counts. `--record REASON` re-measures one case
at a time, rewrites the golden with its reason and sorts each tier by the first kernel's time.

The report, docs/kernel-ladder.md, gives per tier and kernel the counts per status and the
frontier: the first case in ladder order the kernel fails. It reuses the rig's process-per-case
runner, timeout and cells; results now carry their path under tests/kernel-cases/ so cases from
other areas can be listed in a tier. The README documents `base`, `missing` and the ladder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 bf0761f6b9 kernel-cases: base recipes, missing capabilities, and the commands' own time
What the complexity ladder needs from the rig's case runner, kept in the one runner:

- A script may name a `base` case directory: that case's commands (and its own base's, up to
  32 deep) run first, so a ladder case starts from the previous tier's finished part without
  copying its commands. `$CASE` is each recipe's own directory; `$OUT` is the running case's
  scratch directory, in its bases too.
- `missing` in expected.json reports the case as not supported yet without running it: a
  capability with no command or parameter (multi-start threads, fillet setbacks) stays visible
  instead of being faked with a stand-in.
- Each result carries `seconds` (the commands' own time, without process start or grading) and
  `measured` (body count, face/edge/vertex counts, volume, area), for the ladder's golden.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 22fdb52498 kernel-cases: tessellation case from #466, skipped sources for sheet-metal, sweeps and tessellation
A revolved cone tip with an exact volume and area; auto-reports without
a design are listed in the skipped.json files.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 9c9ec27c3b kernel-cases: fillets cases from #1008, #1191, #3276 and #3753
A tray with seven rounded edges, both rim rounds of a tube, a chamfer on
a joined L-shaped body, and a circular pattern of a chamfered hole, each
with an analytic volume.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 8764a76ff8 kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987 #3130 #3824
An M8x1 thread in a 7 mm hole, and three booleans of finely faceted
prisms (1000 and 1200 flat faces) with planar and curved partners, each
with a closed-form volume. Three auto-reports without geometry are
listed in skipped.json.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 c24b066d25 kernel-cases: an outcome for geometry with no single manifold answer
`"outcome": "solid_or_refused"` takes a clean refusal, or else grades the result as usual. Two
bodies that touch along a circle only (#168, #3841) have no one-solid union: a refusal or the two
bodies left apart are both right; fusing them is wrong. The two cases said opposite things
(two bodies, a refusal) and now agree.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 678a70da2c kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
  holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
  #3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
  curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
  body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
  two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 75aa8acb6c kernel-cases: sweeps skipped sources (72)
Every other sweep, loft, revolve, pipe, coil and rib issue and PR, one line each: auto-filed reports that carry only command parameters, reports cut off in the source, UI and dialog items, feature requests, and failures that belong to import, shell, fillets, booleans or tessellation.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 434a68bbc2 kernel-cases: sweeps coil and surface cases from #793-#4056
Coils split and trimmed by a plane, cut with a negative pitch, joined flush round a cylinder, intersected with a cylinder, cut as a thread groove into a bore, and placed with a square wire outside the diameter (screw-motion Pappus); surface revolve, sweep and loft sheets with areas worked out by integration, and a rail-guided surface loft in either section order.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5f131cb888 kernel-cases: sweeps closed, twisted and joined sweeps from #561-#3897, ribs, tripod pipes
End faces of a loft, a sweep and a coil extruded, closed twisted sweeps round a torus, a twisted square cut through a tube, a ring swept along a short arc and joined to a collar, two overlapping swept arc walls, a rib grown along the sketch normal, and three pipes meeting at a point.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 a9002968f0 kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
End scale, parallel orientation and guide rails on straight paths (frustums and a sheared cylinder), a rectangle swept round a mitred corner, a profile mid-line on a closed rounded rectangle, second sweeps from a plane along a closed circle, hollow and cutting pipes, and a flat wall of a swept corner extruded.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5e71db6628 kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Refusals for a profile across the axis and an axis outside the sketch plane, a construction axis picked by name, a cone left by a revolve cut, revolve joins and cuts whose end faces lie in a face of the target, a dome cut by a ball on its seam, a horn-torus turn, and half-disc revolves with a refused hostile sweep scale.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 b60debec11 kernel-cases: sweeps revolve cases from #450-#2947 (faces, axis, cuts, seams)
Spherical shell sketched off the origin, adjacent profiles on the axis, whole planar faces of full and partial turns and a face pick on a fresh revolve, a half slot turned about its centreline (alone and as a cut), a torus cut by an overlapping ring, and a 300 degree revolve crossed by a plate.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 ec154f5421 kernel-cases: booleans cases from items another area had skipped (#451, #1107, #1140, #2928, #3850/#3741, #1984, #3573)
Added: 451 (block inside / crossing a hollow spherical-shell tool), 1107 (hollow hub joined
with nine blades), 1140 (spiral hollow lofted tube cut in half and joined), 2928 (cap-touching
lips with 0.0001 mm offset walls), 3850 with 3741 (cross cut touching a round side, and the
hole after it), 1984 (near-coaxial pin and rivet overlaps). #3573 is now a source of
shell/3576. Their lines are gone from the skipped files; #2259, #3518 and #3602 stay skipped
with corrected reasons.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00