* claim: #7502
* Assembly: name placed bodies from a per-design index, reveal the Browser from the body's path, evict cache entries singly (#7502)
* Release the placement index before in-place document edits so pinning body names stays in place
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A sketch on a face of a placed component is evaluated in that component's frame, so the
evaluator moves (and meshes) the bodies placed differently into it. FrameBodies keeps those
moved bodies, but every evaluate started a new generation and dropped what neither it nor the
evaluation before it used. Evaluations that reuse every result never touch the cache, so two
of them in a row emptied it: Delete refreshes the model three times (selection.delete's nested
refresh, its own, then execute's), and the confirmation's dry run more, and an undo answered
from the cache is another. The next edit of the sketch then moved and meshed every placed body
again: in a design of ~3,500 imported bodies each sketch edit after a Delete took 46 s, 34-43 s
of it tessellation.
The generation now starts on the evaluation's first use of the cache, so an evaluation that
moves nothing leaves it alone. It still holds at most two generations of moved bodies.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6380
* Cylinder: place by distances from reference edges, like Hole (#6380)
A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.
In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: Edit Feature shows each reference edge input once (#6380)
A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder references: the measured-once cost test's cylinder has none (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: pick the face it stands on in its window, then the edges (#6380)
The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder edge references: the Cone dialog (#6250) gets the references field too
The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Navigation: Free orbit can turn around the vertical axis (#6964)
A new option under Free orbit, Turn around the vertical axis, makes mouse
drags a turntable without the pole limit: sideways turns about the world's
up axis (reversed upside down so the model follows the cursor), up/down
tilts over the top. Off by default; free orbit without it is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Japanese and Chinese for the vertical-axis orbit option (#6964)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Arabic, Hebrew, Vietnamese, German and Korean for the vertical-axis orbit option (#6964)
Main now treats ar, he and vi as complete catalogs, so the merge queue's
every_complete_catalog_carries_every_english_message failed on the two new ids.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhpMr6L9PR8SJXjM6MbQrD
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: danieldimitrov86 <danieldimitrovdev@gmail.com>
* claim: #7756
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* File dialogs open in the folder used last (#7756)
The desktop dialogs never said where to open, and the Linux ones then
start in the home folder every time. Open, Insert, attach, Save As and
Export now open in the folder of the file last chosen in a dialog, or of
the open design when another design becomes the open one, whichever came
last. Also fixes#7735.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5769
* Let body appearances replace imported STEP face colours (#5769)
A body appearance assigned in the design now replaces the face colours the
body was imported with; face appearances set in the design still win over it.
* claim: #7567
* Sketch: a drawing tool's value box takes `name = value` (#7567)
While drawing, a value box (circle diameter, line length, rectangle width and
height, slot, arc, polygon) now accepts `name = expression` and
`#name = expression`, as the Dimension tool already does: the shape is drawn at
the expression's size and its dimension defines and uses the user parameter
`name`, in one undo step.
- sketch.draw.dimensioned checks a definition's right-hand side, read as the
new parameter will hold it (a bare number in the design's unit), and passes
the text on to sketch.dimension; the reply lists `defined`.
- The value boxes size the preview and validate by the right-hand side, refuse
a definition in a box that is not a dimension (polygon sides, rounded
rectangle corner radius, conic rho), and the status line names the
parameters defined.
- Guides: parameters and sketching.
Fixes#7567
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7296
* Viewport: a frame the GPU has no memory for is drawn smaller, not a crash (#7296)
The viewport's offscreen frame, its see-through targets and the cached
still picture were created with no error scope, so a texture the card had
no video memory for went to wgpu's default handler and closed the app
("wgpu error: Out of Memory" on a GT 740). They are now created under error
scopes; a refused frame lowers the renderer's frame budget and is asked for
again smaller (less supersampling, or the view's own frame drawn smaller and
filtered up), refused OIT targets fall back to sorted see-through surfaces,
and the status line says once that the view is drawn at a lower quality.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* GPU memory test: targets take the OIT flag main added (#7296)
The test's two GpuTarget initializers predate the oit field and no longer
compiled once the branch met main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6003
* Save: a design changed while it is written stays unsaved, and scripts wait for it (#6003)
Two of the gaps @raykholo found in #6003 were still open on main:
- `engine.script` ran while the window's Save was being written: it calls
the session directly, past `SolveApp::run`'s file-operation guard, and
`drain_control` did not hold design-changing requests for a save. They
now wait for the save like they wait for a file being loaded or picked.
- `adopt_save` marked whatever the session held when the save finished as
saved. It now takes up the state the save wrote (`done.saved`, and its
visibility), so a change made meanwhile stays unsaved instead of being
lost on close without a prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6570
* test(text): cover nonpositive pitch and format-12 glyph zero (#6570)
Original synthetic font regressions. Focused native font tests, strict scoped Clippy and wasm pass. Full repository gate status is recorded in PR #6574; no CI infrastructure changes.
* Sketch: switch a circle or arc dimension between radius and diameter (#7499)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Toggle Radius / Diameter for a circle's or an arc's dimension (#7499)
New command sketch.toggle_diameter, with input and output schemas, and a
context-menu item on a single selected radius or diameter dimension. The
circle keeps its size: the dimension's parameter is halved or doubled (a
plain value is rewritten, an expression is wrapped). Refused, with nothing
changed, when anything else uses that parameter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7741
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move: a copying Move can be edited from the History (#7741)
Editing a feature runs its command on a scratch session with the marker
right after it. For the last feature that marker sits at the end of the
timeline, and place_feature pushed the new feature after it, rolled back,
so a copying Move found no copies and refused the edit. A marker right
after the last feature now moves on past a feature added there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7749
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: deleting one instance of a component takes its joints with it (#7749)
Deleting an occurrence while its component had other instances dropped
only the occurrence: the joints on it, their motion links, joint origins,
contact set places and exploded moves stayed, so a joint stayed in the
Browser naming an occurrence that was gone. The clean-up that
remove_component_tree did is now Document::remove_occurrences, used by
both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5638
* Box dialog: place the box by its corner or centre (#5638)
The Box dialog gets a Placement choice (Corner or Center) with X, Y and Z
fields that take expressions and units, and a Point input: a vertex, a
point on an edge or face, or the origin picked in the view fills them.
The Cylinder dialog gets X, Y and Z for the centre of its base. Left
alone, a new dialog sends no placement, so the box stays at the origin;
Edit Feature shows the stored point and OK without a change keeps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box dialog test: pass the active feature to Input::accepts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box dialog: Base Center in the complete Arabic, Hebrew and Vietnamese catalogs (#5638)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
The native codec gave one body back with other topology: a pattern copy
cut by an automatic extrude, 10 faces, 18 edges and 10 vertices, came
back with 12 vertices, so the design opened with another body than it
was saved with. Encoded::of now decodes each body it encodes and keeps
the model only when every body comes back with the same face, edge,
vertex and shell counts; otherwise the design is saved without its
model, as when the encoder refuses a body, and opening it evaluates it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6707
* feat(dialogs): open in the left column in place of the browser and History (#6707)
* fix(i18n): Vietnamese messages for the dialog placement option (#6707)
* claim: #6525
* perf(eval): reuse local geometry across placement changes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): preserve recovery journal through shared refresh
The shared evaluator retains the document Arc, so refresh and body-name
pinning can copy it after command_done recorded its address. The next read
then mistakes that copy for an outside edit and discards the replay.
Record completion after refresh, name pinning or failed-command restoration.
Add a minimal journaled box/inspect regression in the existing crash suite.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7009
* Assistant: connect the last-used agent and open the panel at start (#7009)
Two Settings > AI options, off by default: when SolidCraft starts, connect
the agent started last (once the installed agents are known; a missing one
is not swapped for another) and open the Assistant panel. Not for runs
started with --control.
A connection that never gets ready (no agent, start error, the agent ends
while starting) is a new Failed state: the header reads Connection failed
and Connect reads Retry. The control channel reports it as "failed" and
takes connect_at_start / open_at_start.
* Assistant: keep the start-up agent when a design replaces the blank one (#7009)
Opening a design over the blank design SolidCraft starts with reset its
chat and stopped the agent connected at start. A chat not asked anything
yet now starts over in place and keeps its agent. Turning AI features
off also drops a start-up connection still waiting for discovery.
* i18n: Arabic, Hebrew and Vietnamese for the start-up options (#7009)
ar, he and vi are complete catalogs on main now, so every new English
message needs them.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
Hovering or picking a face in the view lights the feature that made that face (its
creator, as Edit Feature on a face finds it: the hole, not the plate it was cut into)
in the bottom timeline, the History on the left and the Browser's Features folder;
edges and vertices light the feature that made their body, as before. A new face or
edge pick scrolls the history shown to that feature once, through the Find in
Timeline reveal.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Update Links reads again only the linked designs that changed (#5606)
Update Links read, evaluated and STEP round-tripped every linked design on every run. Remember a digest of each linked file, of the STEP it gave and of its face names, and skip a link whose file, bodies and face names are all unchanged. Read a linked design through its saved model when the file has one, as opening it does.
* Drop an import the rebase left unused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7350
* Report a bug: Retake rebuilds the details instead of refusing, and keeps the screenshot (#7350)
Once anything changed with a report open, every Retake refused with "Settings or model
changed. Close this draft…", and each refused, waiting, timed-out or stale capture deleted the
screenshot the draft had. Retake now rebuilds the technical details for the current view
(keeping what was typed, edited details and a crash draft's body) and re-baselines before it
captures; the screenshot is replaced only when a new frame is accepted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The default view sends the single pixel's ray through a box edge, which the
raytracer rejects as an ambiguous interface normal. The job then ended Failed
whenever the render thread got ahead of render.cancel (about 7% of runs under
load), and the test only accepted Cancelled or Completed. Render off-axis so
the outcome no longer depends on that race, and print the phase and error if
it ever fails again.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7148
* Lost GPU: a dropped frame no longer crashes the window's close (#7148)
On a lost device wgpu's present and discard return early and leave the
acquired frame's image in the surface, holding a swapchain acquire
semaphore. Dropping the surface later (the window closing for the
restart after the loss) then panicked in wgpu-hal. The painter now holds
the frame as AcquiredFrame, which destroys a second handle to the
frame's texture after the frame is presented or dropped; wgpu-core's
destroy of a surface texture takes the image back without checking the
device, and does nothing once a present or discard took it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7077
* Repeat Last Command in command search, with a key you can change (#7077)
Shift+R already started the last tool or dialog again (#3045), but it was a
key the app kept for itself: command search could not find it and Keyboard
Shortcuts could not change it. It is now the command edit.repeat, with
Shift+R as its default key. A call through the engine is refused, because
only the app has a tool to start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6533
* Sketch: add points to an existing spline (#6533)
A spline could not take more points after it was drawn. The new command
sketch.spline.insert_point inserts a fit point on the curve where it
passes nearest a spot, between its neighbours, or adds a new first or
last point. Existing points keep their indices, so constraints stay. A
right-click on a fit point spline offers Add Spline Point at the clicked
spot. Control point splines are refused for now: with uniform knots one
more control point would reshape the whole curve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for Add Spline Point
ar and he are complete catalogs on main now (#3458). The pending-messages
test compares right-to-left messages in display order once #7532 lands
(#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7219
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: delete a folder with its features, and suppress a whole folder (#7219)
`timeline.delete` and `timeline.suppress` take `groups: [timeline folder ids]`:
every feature in those folders and their nested folders, in one undo step.
A delete takes the folders themselves too; `timeline.ungroup` still keeps the
features. The History on the left offers Suppress/Unsuppress Selected Folders
and Delete Folders and Features… (asking first, like Delete Selected
Features…, when something outside needs them); a folder whose features are
all suppressed is drawn faint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History folder actions: Arabic, Hebrew and Vietnamese strings (complete catalogs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6981
* Drive Joints: say why a rigid joint can't be driven and offer Edit Joint (#6981)
Drive Joints opened on joint 0 when no joint moved, and its preview ran
joint.drive on that rigid joint, so the dialog showed a red "a rigid joint
does not move" with a Create Issue button.
The dialog now says a rigid joint holds its parts still and how to let them
move (Revolute to rotate, Slider to slide, Cylindrical for both), with an
Edit Joint button that turns it into Edit Joint on that joint. Its commands
refuse a rigid joint, so nothing is previewed and OK stays off. A rigid
joint picked in the browser opens Drive Joints on it to say the same; the
joint box lists only joints that move. joint.drive's own refusal names the
types that move and joint.edit.
* Drive Joints: the rigid joint message in Arabic, Hebrew and Vietnamese (#6981)
Main now delivers ar, he and vi complete, so every new message needs them.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #7395
* Sketch: a circumscribed polygon stays regular when dragged (#7395)
Circumscribed Polygon held its sides equal and tangent to the support
circle only. Equal sides round one circle leave every other corner free
(a rhombus round a circle), so a hexagon had 9 degrees of freedom instead
of 4, and dragging its centre or a corner pulled it out of shape (radius
10 became 8.02, angles 174/66 degrees).
Its corners now also lie on a construction circle concentric with the
support circle, which makes it regular as an inscribed polygon is, and
one side is tangent to the support circle, which sets its size: dof 4
(centre, size, turn). One tangent rather than all of them, so no
constraint is redundant.
Test in sketch_ux_tests: 4, 5 and 6 sides, dragged by the centre and by
a corner, stay regular with their sides on the support circle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A point a distance from another point on the same line has two places on it, the same distance
either way. A solve after a value edit or a link move could land on the other one and report the
sketch solved, with no warning: the point jumped to the other side of its anchor, twice the
distance away. Such a distance is now an orientation the solves keep, like an unsigned offset's
side: which way along the line the one point lies from the other. One point must be on the line
by a constraint (an end, a point held on it, or coincident with either); the other may lie on it
by what else holds it (the mirror image of a point on it across a line square to it), read where
it is in the reference state.
Test: a point 3 mm along a linked rail from a point held on it, or mirrored onto it: the image
back past that point counts as a flip, and the rail walked far keeps the side.
Fixes#7506.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6804
* Sheet metal: a base or contour flange hides its sketch (#6804)
Only an Extrude or a Revolve counted as using its sketch, so the sketch of a
base flange stayed shown. Its line on the plate's bottom edge lies exactly on
that edge and took the Flange dialog's click: a sketch line makes a contour
flange, a separate flat wall with no bend whose Flip moves it into the plate.
A base or contour flange now uses its sketch as an Extrude does: hidden unless
shown on its own, and shown while its feature is edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sheet metal: test that a click on the bottom edge makes an edge flange (#6804)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The merge queue ran the four-shard GPU path tracer tests (about 56 runner-minutes)
on every group. Now they run when the diff touches render code (crates/render,
crates/gpu/src/path, the render workspace UI, assets/render), or a pull request
carries the new render-tests label (a pull request or a group holding one). The
nightly and manual runs still always run them; a push to main does not.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the cylinder, sphere, torus, pipe, bounding solid and scale
Contracts for solid.cylinder, solid.sphere, solid.torus, solid.pipe, solid.bounding_solid and
solid.scale, with `FeatureResult` output, and the shared types `AxisDir` (calling
`cmd::axis_dir_form`, split from `axis_dir_param`), `NumberExpr` and `ScaleFactors`. The
descriptions say what the evaluation does: the limits it enforces, the real default scope of
`targets`, and where `participants` overrides a key or has no effect. Scale makes no body, so it
declares `name` and `participants` itself. Box's descriptions get the same corrections. The
reply test runs every form in Warn and checks for no `param_warnings`; the guide lists the new
types and adds lessons from the conversion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contract for the cone
`solid.cone`, added on main beside the primitives this PR converts, gets its contract and
`FeatureResult` output: the cylinder's keys plus `top_radius` / `top_diameter`, with the
evaluation's limits in the descriptions (a radius above 0, a top radius of 0 or more, a height
that is not 0 and may be negative, sizes within 1e7 mm). A `null` top radius stays the handler's
to refuse, since the handler takes it beside a `top_diameter`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>