Commit Graph
3176 Commits
Author SHA1 Message Date
raykholo ab9d9ac50f Manage > Units opens the unit picker (#5907) (#5908)
* claim: #5907

* Fix Manage Units to open the shared unit menu (#5907)

Open the browser's existing unit choices for interactive command starts
instead of executing document.units without its required parameter. Anchor
the menu below toolbar buttons and menu rows. Choices still run the normal
command, while programmatic calls require an explicit unit.

Cover error-free opening, unit choices, button anchoring and dismissal,
the current-unit marker, one-step undo/redo, and programmatic calls.

Fixes #5907
2026-10-25 04:35:33 +00:00
rbousigues88andClaude Sonnet 5.5 157c0d68d0 Sketch Dimension: point/circle to circle or arc edge (#4064) (#4065)
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)

Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.

Fixes #4064.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Dimension scenario: pick the circle at its top edge (#4064)

The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 04:29:28 +00:00
38d7ea4198 Agent chat: each design tab keeps its own conversation (#5439) (#5612)
* claim: #5439

* Agent chat: each design tab keeps its own conversation (#5439)

* Adapt chat-per-tab changes to the new Pending context and cursor tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 04:20:54 +00:00
dudedagger42andClaude Opus 5.5 7c2b2f1559 Revolve takes a planar body face as its profile (#2747) (#5170)
solid.revolve already revolves a planar body face (`face`, `face_body`), but
the Revolve window's Profile input took sketch profiles only, so a face
couldn't be picked. The input now takes planar faces too, and a picked face
is sent as `face`; sketch profiles win when both are picked.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 04:06:08 +00:00
raykholo cc1e654690 Warn when a design is open elsewhere or changed on disk (#5467) (#5468)
* claim: #5467

* Warn when a design is open elsewhere or changed on disk (#5467)

The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.

A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.

Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
2026-10-25 03:34:20 +00:00
raykholo 7af97e3729 Editing an Extrude or Revolve shows its sketch (#5336) (#5443)
* claim: #5336

* Editing an Extrude or Revolve shows its sketch (#5336)

A finished sketch is hidden once a feature uses it, and it stayed hidden
while that feature's dialog was open for editing, so no other profiles
could be picked. The session now holds the sketch of the feature being
edited; the edit dialog sets it while it is open and clears it however
it closes, and that sketch is drawn without changing stored visibility.
2026-10-25 03:26:36 +00:00
raykholo 138bb0261c Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063) (#4403)
* claim: #2063

* Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063)

On Windows with only OpenGL to start, the window opens with the system
title bar instead of using the application bar as its title bar. The
window without OS decorations keeps its caption style while having no
frame, and some OpenGL drivers (older Intel HD/UHD) show the picture a
caption's height lower than the window, so clicks land above what they
point at. Direct3D 12 and Vulkan keep the custom title bar.

The choice is made before the window opens, from the backends wgpu
starts, so the window never changes its frame while OpenGL draws into it.
2026-10-25 03:19:34 +00:00
raykholo dbe7dfa4bc Report a bug: title from the workspace and the reporter's words (#5377) (#5445)
* claim: #5377

* Report a bug: title from the workspace and the reporter's words (#5377)

With no dialog open the report was always labelled "Modeling" and its
summary pre-filled as "unexpected result", so every such report arrived
titled "Modeling: unexpected result" and the fallback to the first line
of "What happened?" never applied.

Label the report from the active workspace (Part, Sketch, Surface, Sheet
Metal, Plastic, Mesh, or Render), leave the summary empty so the title
becomes "<workspace>: <first line of the description>", and keep
"operation failed" when an error was recorded. The summary field now
hints that a short title is optional.

The triage script that asks for an empty in-app report to be pasted
recognises the new titles.
2026-10-25 03:03:08 +00:00
bherbruckandClaude Opus 5.5 1ceab2ed4c One file per change for new UI strings and attribution rows (#6448)
New UI strings go in assets/locales/pending/<slug>.json and new ATTRIBUTION.md rows in
attribution/pending/<slug>.md. The app build, xtask lists/i18n/assets read them as part of the
catalogs, and the Generated files workflow folds and deletes them on main with
cargo xtask fold-pending.

Refs #6439

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 03:01:41 +00:00
wckdboyandClaude Opus 5.5 743accca7a Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031) (#5409)
* claim: #4031

* Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031)

A trimmed face's boundary segment that crosses a constraint already in the
triangulation went to spade's add_constraint_and_split, which asserts
(cdt.rs:978, `!previous_region.is_empty() || from == final_vertex`) when a
split lands so near another vertex or constraint that the piece up to it is
blocked. The kernel guard caught it, but the whole operation failed and a
crash report was written; a STEP body imported empty or not at all (#4598,
also #4293, #4478, #5068, #5229).

PolyBoundary::add_constraints now adds every segment that can be added, then
splits each blocked one itself: a vertex at each crossing, inserted from the
crossed edge's own vertex, and the pieces between added where they can be. A
segment with crowded or very many crossings, or a face with more than four
blocked segments (a rim that runs back and forth across itself), leaves them
out, as truck did before #1653, so the face meshes slightly off instead of
not at all. Pinched faces (#1648) still split where they cross.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:55:24 +00:00
bherbruckandClaude Opus 5.5 128692da0c Agent chat: no per-message limit by default (#6349)
* Agent chat: no per-message limit by default

The limit is optional now: an Unlimited checkbox on the AI page (checked by default), a
number field when unchecked. A saved 24, the old default, reads as unlimited. The API-key agent's
24-request and the gate's 400-request caps are gone; Stop still cancels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: add the new messages to the complete Japanese and Chinese catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:54:13 +00:00
rbousigues88andClaude Opus 5.5 13b4f6e98c Viewport: a selected edge's highlight no longer shows as a wedge on a grazing face (#3544)
* Viewport: lift selected and hovered edge highlights toward the eye

A selected edge's highlight (3 px core, 6 px halo) is a screen-space band that
was depth-tested at the edge's own depth. A face next to the edge seen at a
grazing angle is pushed back by only about a pixel of its slope, so it buried
part of the band, unevenly along the edge: the highlight showed as a thin
wedge instead of a line.

The band is now drawn like a thin cylinder around the edge: its depth is
pulled toward the eye by half its width plus a pixel, measured on screen so
it holds at every zoom. Plain model edges keep their depth (#1434 still
holds); the part of a highlighted edge the model really hides stays dimmed
through hidden_line.

Not yet compiled or tested.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: lift an edge highlight by how steeply its faces are seen

The first lift (half the band's width plus a pixel, the same on every edge)
was not tied to the faces beside the edge. Each highlight segment now carries
the normals of the two faces it borders (octahedral, packed with its width in
the line's width slot, read as u32 by vs_line): the band is pulled toward the
eye by its half width times how steeply those faces are seen, so a grazing
face no longer buries it, and an edge seen square to its faces is not lifted
at all.

Test: a_selected_edge_on_a_grazing_face_draws_whole (tilts 60 to 88 degrees,
small and large designs, orthographic and perspective; the band 5 mm behind
a face stays hidden). Capturer::rgba_highlighted draws a highlight scene as
the viewport does, for that test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:48:34 +00:00
raykholo ac53fc1e6f Viewport: bodies stay visible after switching to perspective and back (#5422) (#5614)
* claim: #5422

* Viewport: bodies stay visible after switching to perspective and back (#5422)
v0.22.0-nightly.20261025.78.1
2026-10-25 02:46:59 +00:00
Homero Thompson 8d63a9f4cb Theme: the viewport keeps the previous colours until the camera moves (#5802) (#5835)
* claim: #5802

* fix: repaint on a theme change and key the frame cache on the theme tints (#5802)

theme::apply asks for a repaint, so the new visuals are painted on the next pass instead of waiting for another event to schedule one. The gpu frame cache key now includes the theme's hover and selection tints, so a picture cached under the previous theme's colours is not reused.

* test(ui): settle egui's startup repaints before asserting the theme's repaint (#5802)

* test(ui): name the call site that asks for the theme's repaint (#5802)

* test(ui): apply the theme outside a pass so its repaint request stands alone (#5802)
2026-10-25 02:46:41 +00:00
bherbruckandClaude Opus 5.5 a150822d9b Put solidcraft-cli on PATH from the AppImage and the macOS app (#6347)
The AppImage writes a ~/.local/bin/solidcraft-cli launcher from its desktop-integration step
(same opt-outs, never over a file it did not write). The macOS app links the CLI into
/opt/homebrew/bin or /usr/local/bin at launch when one is writable, and Help > Install
solidcraft-cli command does it with an administrator prompt otherwise. Snap and Flatpak are documented.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:45:45 +00:00
raykholo a9fd4b1b05 A dragged command window keeps its place (#5357) (#5444)
* claim: #5357

* A dragged command window keeps its place (#5357)

Command dialogs share one dragged offset per dock side for the session
instead of one per title, and closing a dialog no longer forgets it, so
the next command opens where the last one was left. The offset is still
kept inside the viewport, including after the window shrinks.
2026-10-25 02:38:48 +00:00
amolinari-autotex face5e2d31 Hole: independent tapping depth and recessed drill points (#4486)
* feat(hole): checkpoint independent tapped thread depth

* test(hole): cover independent tapped thread depth boundaries

* fix(doc): bind tapped depth to the useful cylindrical wall

* feat(hole): dimension independent thread depth in the section editor

* fix(hole): preserve custom tapping controls after main integration

* feat: add recessed-hole drill points and order depth dimensions

* fix(hole): match the current preferences and UI kit

* fix(hole): verify reference placement with independent tapping depth
2026-10-25 02:31:24 +00:00
Benny1496 efd0e70f7d fix(oracle): use curvature-weighted centroid moments for case 33 (#5442)
* fix(oracle): use curvature-weighted centroid moments for case 33

* style(oracle): preserve reference JSON numeric formatting

* docs(oracle): remove transient case 33 validation note
2026-10-25 02:30:39 +00:00
SiroArtandClaude Sonnet 5.5 3f4c6e4571 Display refinement waits until the camera stands still (#3595) (#5446)
Choosing and swapping in a refinement rebuilds and uploads the whole model
scene. During an orbit of a large assembly that happened about ten times a
second, tens of milliseconds each. It now waits until the camera has stood
still for 200 ms.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 02:30:36 +00:00
rvmzym5xv8-starandClaude Opus 5.5 abc39685b1 Parameters: name the limit an out-of-range number or over-long expression broke (#5906)
Part of #4712.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:30:04 +00:00
Colin Faulkingham f93913b3d3 Sketch: accept curve snaps for Midpoint Line (#5981) (#6041)
* claim: #5981

* fix(sketch): resolve midpoint line snaps (#5981)
2026-10-25 02:29:47 +00:00
ivisafandClaude Opus 5.5 765c5fd143 Pictures drawn off the window thread finish before the process exits (#6062) (#6063)
A Home picture still being drawn by the detached saved-thumbnail thread
could be on the GPU as the process exited, and the process died with
SIGSEGV inside the graphics driver. capture::close stops new pictures
and waits for those in flight (the app calls it in on_exit), and
dropping SolveApp waits for the Home picture threads it started.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:40 +00:00
Colin Faulkingham 6494f8fe18 AutoConstrain: dimension construction geometry (#6173) (#6185)
* claim: #6173

* fix(sketch): dimension construction curves in AutoConstrain
2026-10-25 02:29:37 +00:00
selune 1623034973 Render: gate bundled studio-data tests in isolated engine builds (#5493) (#6202)
* claim: post-merge Render review corrections (#5493)

* fix(render): gate bundled studio tests in isolated engine builds (#5493)

Addresses jyviko review comments on #5494: compile the two positive payload-dependent regressions only with bundled-render-library. Keep all assertions and the explicit feature-absent refusals. Reproduced 5 pass / 2 fail before the fix; isolated default, CPU without pack, and CPU with pack tests plus strict scoped Clippy and repository checks pass. No production or CI configuration changes.
2026-10-25 02:29:34 +00:00
NOWN-DEVandClaude Opus 5.5 74004841b4 Sketch text: a text on a path follows the path in the same evaluation (#6215)
* Test: a text on a path follows the path when a parameter moves it

A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch text: a text on a path follows the path in the same evaluation

Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.

Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:31 +00:00
NOWN-DEVandClaude Opus 5.5 be08517de2 Construction: a plane on a sheet's flat face follows the face (#6217)
* Test: an offset plane on a sheet flange's face follows the flange

An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: a plane on a sheet's flat face follows the face

Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.

Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:28 +00:00
NOWN-DEVandClaude Opus 5.5 24ed21998b Configurations: a design keeps up to 2048 rules (#6221)
* Test: a design keeps several hundred configuration rules

An assembly that switches a few hundred parts on and off, by two rules each, needs hundreds of
rules; the saved-rule budget refused more than 128.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Configurations: a design keeps up to 2048 rules

Problem: a configuration table kept at most 128 rules. A rule drives one feature's suppression,
so an assembly that switches a few hundred parts on and off (by two rules each) could not keep
its rules. Copying rules for an independent component copy looked up each new id by scanning all
rules, which a larger table makes slow.

Solution: MAX_RULES is 2048; a copy looks its new ids up in a set of the ids taken. The docs say
the new limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:25 +00:00
NOWN-DEVandClaude Opus 5.5 3592031d5e fix: joints on an imported part's hole or face stay on that part (#6368)
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.

named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:16 +00:00
NOWN-DEVandClaude Opus 5.5 b8d9db7440 fix: a face-centre joint origin stays put when a hole in its face moves or goes (#6370)
A joint origin at a face's centre (`joint.origin {face}`, `Snap::FaceCenter`) was the face's
area centroid, holes included. A hole cut into that face, moved or suppressed therefore moved
every part held at the face's centre, though the face's outline stayed where it was: on a
200 x 100 plate with a 20 mm hole, 0.31 mm for each 20 mm the hole moves and 0.62 mm when the
hole, 40 mm off the middle, is suppressed.

On a planar face with holes the origin is now the middle of the area the face's outer boundary
encloses (`outline_centre`: the face's triangle sides that no other triangle of the face runs
back along, corners matched by place, chained into loops in the face's plane; the centroid of
the loop enclosing the most area). A named face (`NamedFace::plane`) and the planar face
nearest a point (`nearest_plane`) both use it. A face without holes, or one whose mesh gives no
clean outline, keeps its centroid as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:14 +00:00
NOWN-DEVandClaude Opus 5.5 2b620338df perf: solve the joints once per parameter change (#6372)
A parameter change evaluates the model and solves the joints inside the
command (so that it can refuse a value that breaks a sketch), and
`Session::execute` refreshes again after the command and solves every joint a
second time, although nothing has moved since. On 40 small parts jointed
rigidly to a plate's holes (half of the joints lifted by an expression),
changing the lifts' parameter took 0.85 s on main and takes 0.45 s now;
changing one part's thickness, 1.96 s and 1.52 s (CLI, medians of 5 runs).

The session now keeps the design the joints were last solved for, as the
solve left it, and the model that solve read. A refresh that finds the same
model, and a design that differs from the solved one at most in its features,
leaves the joints as they are: the joints read features only through the
model, and a value edit stores the new solutions of the sketches it drove
after its solve, so its design is a new one by the time of the second
refresh. Placements and bounding boxes come out identical.

Test: `a_parameter_change_solves_the_joints_once` counts one solve per change
(two before), checks the jointed part still follows the hole, and that a
captured move of a jointed part is still solved back.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:11 +00:00
NOWN-DEVandClaude Opus 5.5 a5b6408587 fix: an edge joint origin on a body placed by an offset lands on that edge (#6374)
An edge joint origin looked its edge and face up in the body's own coordinates with the pick in the component's,
and returned the frame in body coordinates. On a body placed by an offset (an imported part's bodies are) a pick on
the edge where it is shown found no edge ("joint origin: no edge there"), or the origin sat away from its edge by
the offset. Edge origins now take the picks into the body's coordinates through the inverse of its offset and place
the frame back by it, as named faces and round origins already do. A body without an offset is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:08 +00:00
bherbruckandClaude Opus 5.5 78de687902 CI: duplicate-PR check and a 'Changes a default' line (Refs #6439) (#6442)
* CI: duplicate-PR check and a required 'Changes a default' line (Refs #6439)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* PR checks: enforce the defaults line only on PRs opened from 2026-10-25 (Refs #6439)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:28:57 +00:00
bherbruckandClaude Opus 5.5 2741cd9a8b Section Analysis: edges behind the cut no longer show through the cap (#6328) (#6363)
Since #1768 the section's stencil marking draws every face with FACE_BIAS.
Where a back face seen through the cut meets a front face along an edge (a
pocket's wall and its side wall or floor, a fillet and the face it runs
into), the slope push decided which was nearer beside that edge; a front
face winning left those samples unmarked, the cap skipped them, and the
edge, drawn at its own depth, showed through the hatch. In perspective, and
while orbiting in orthographic too, edges popped in and out from frame to
frame.

A second marking pass draws the back faces only (front faces culled, depth
test <=, no depth write), pulled toward the eye as far as FACE_BIAS pushes
faces back, before the cap. The depth buffer keeps FACE_BIAS, so edges on
visible faces still draw whole (#1434).

Tests in crates/gpu/tests/depth.rs: a pocket 2 mm behind the cut, and a
filleted hub with a bore and a cross hole seen from twelve directions, both
depths, orthographic and perspective. On main the pocket shows 45 px of
edges through the cap in perspective and the hub 25 px over the views; with
this change 0 and at most 2.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:03:31 +00:00
raykholo 86f5500914 Sketch: arcs and circles honour construction when they are created (#5352) (#5440)
* claim: #5352

* Sketch: circles and arcs honour construction (#5352)

sketch.arc.center_point, sketch.arc.three_point, sketch.circle.two_point,
and sketch.circle.three_point accepted construction: true but drew normal
geometry. They now mark the new curve as construction, like lines and
rectangles, and their parameter docs list construction?.
2026-10-25 01:56:44 +00:00
DuBearteandClaude Opus 5.5 7804f9938a Intersection curves: a point that won't project no longer panics (#5562) (#5812)
* claim: #5562

* Intersection curves: a point that won't project no longer panics (#5562)

A quarter disc at a box's corner revolved 360 deg about the box's edge and
cut (a hemisphere whose pole sits on that edge) panicked in truck at
intersection_curve.rs:133: dividing one of the cut's intersection edges
met a point that projects onto neither surface, and the hinted
projection's fallback called subs, which unwraps that same failed
projection. The guard turned it into a failed cut and a crash report.

Now the leader's point stands in, the division stops there, and the
failure is recorded (truck_geometry take_projection_failure). truck-shapeops'
face division checks it after dividing an edge and gives up, so the
Boolean attempt fails as quickly as the panic made it and the kernel goes
on to its other tries: carrying the approximate points on instead made one
kernel test (equal bores crossing) run for minutes. On this design the cut
still fails with an ordinary error, leaving the box whole; nothing panics.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:23 +00:00
DuBearteandClaude Opus 5.5 ab03aa5bc5 Sketch: explicit planes take a frame (world or component) and the reply says which (#6000) (#6015)
* claim: #6000

* Sketch: explicit planes take a frame, world or component (#6000)

sketch.create and sketch.redefine take frame: "world" (the default,
as before) or "component" for an explicit {origin, x_dir, y_dir}
plane. The reply says which frame the plane was read in, with a note
when a world plane goes into a moved or turned component. frame on a
named plane or a face is refused: those are where they are.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:10 +00:00
semmelrindeandClaude Opus 5.5 2e3f27f06e Extrude: the automatic operation is decided where the extrude starts (#467) (#6104)
With Start set to From Object (or a start offset), the automatic
operation was still decided from the profile: the engine probed for
material just past the profile plane, and the dialog kept the operation
it had latched before the start changed. A profile on a plate's top,
extruded 14 mm down from the plate's bottom face, came up as Cut instead
of Join. The engine now probes from the extrude's start (and, to an
object, reaches from there), and the dialog decides the operation afresh
when the start changes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:04 +00:00
DuBearteandClaude Opus 5.5 bda32419bd Windows: a stuck icacls no longer freezes SolidCraft when it writes the control token (#6145) (#6182)
* claim: #6145

* Windows: a stuck icacls no longer freezes SolidCraft when it writes the control token (#6145)

Writing the control token runs icacls to drop the file's inherited
permissions, and waited for it without a limit. On some computers the
new icacls process stays suspended, so connecting an agent froze the app
for good. It now waits at most 5 s; an icacls still running then is ended
and the token written anyway, into the user's own local app data folder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:01 +00:00
NOWN-DEVandClaude Opus 5.5 c242c484a8 Construction: the root's constructions are found once the design has a component (#6219)
* Test: a plane through a construction axis follows it in a design with a component

Two offset planes, the axis where they meet and a plane through that axis. Once the design has a
component, a parameter change fails the last plane with "unknown construction `Ax`".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: the root's constructions are found once the design has a component

Problem: once a design has a component, the root's construction features are built in the model
placed in the world. That state carried each component's bodies, sketches and threads, but not
its construction planes, axes and points, so a construction built on another one failed on every
evaluation with "unknown construction".

Solution: the world state carries each component's constructions where the component is placed
(moved by its occurrence's placement, as the bodies are).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:56 +00:00
NOWN-DEVandClaude Opus 5.5 5d37cb01d5 Configurations: config.rule takes several rules at once and checks the rows once (#6223)
* Test: configuration rules given together are checked with all of them in place

Suppressing a box and the cut on it: the box's rule alone fails the row check (the cut has
nothing left to cut), so the two rules can't be added one at a time. Given together they pass,
in one undo step; a bad rule among them adds none.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Configurations: config.rule takes several rules at once and checks the rows once

Problem: config.rule adds one rule and checks every saved row with it. Rules that only hold
together (suppressing a body and the cut on it) could not be added at all: the first one alone
fails the check. A design with many rules also rebuilt every row once per rule.

Solution: config.rule takes `rules: [...]`: each rule is added or replaced as with `rule`, then
the rows are checked once with all of them in place, in one undo step; a rule that fails
validation adds none. The docs describe it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:54 +00:00
NOWN-DEVandClaude Opus 5.5 7313fd8684 Joints: an origin takes a face name as long as the face's piece name (#6225)
* Test: joint origins take a long piece name

A face split by a cut whose edge runs in many segments is named after every face around its
piece, several hundred characters. joint.origin refused such a name, as model.faces gives it,
over 512 characters, both for a face centre and as a round end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Joints: an origin takes a face name as long as the face's piece name

Problem: joint.origin and joint.create took a face name (a face centre, a round end, an x
direction) only up to 512 characters. A face that a cut split is named after the faces around its
piece (`<face>#[<face>,…]`), which reaches several hundred characters when the cut's edge runs in
many segments (a slot with a zigzag edge, a cut of text), so a name model.faces gives was refused.

Solution: the face names a joint origin takes are capped at 16384 characters (MAX_FACE_NAME),
still a bound on hostile input.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:52 +00:00
NOWN-DEVandClaude Opus 5.5 6f340ade69 Sheet metal: a refolded sheet's faces keep the names of the faces they were (#6268)
* Sheet metal: test that an unfolded sheet's flat face is named after its base at every size

An unfold keeps the base in place and lays the flanges out beside it; the flat
face spanning them and the bend strips is the base's face. It was named after
the unfold whenever few of its sample points fell on the base (the bend strips
are many small triangles, the base two big ones), and that changed with the
sizes: a size change renamed every top and bottom face the refold made of it,
and joints and sketches on them lost their faces (40 of 85 joint ends of a
real part after one change). The test unfolds and refolds a base with three
flanges at two flange heights and wants the flat face and every refolded
panel face named after the base.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sheet metal: the panel an unfold or refold keeps in place names the face it is part of

A face a sheet feature made is named by where its sample points lie on the
input's faces: in place, else taken back through the folds. Only nine points
per face are sampled, triangle centroids picked by index. An unfolded sheet's
flat face spans the base, the flanges laid out beside it and the bend strips
between them; its bend strips are many small triangles, so most samples fell
on them. Those lie on no panel, and one of them made the fold fallback give
up for the whole face. The face was named after the unfold, and the refold
passed that name to every top and bottom face; which way it went changed with
the part's sizes.

For a sheet feature that moved panels, a face the plain vote leaves unnamed
is now looked at closer (up to 256 points): if a part of it lies in place on
the body's own face before (the panel the feature kept), that face names it.
Else the fold fallback votes over the points that can be taken back, when at
least half can, instead of none when one cannot. Other features, and faces
the plain vote names, are named as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:49 +00:00
NOWN-DEVandClaude Opus 5.5 e260437846 Names: a pattern copy's piece names match as the original's do (#6270)
* Test: a pattern copy's piece names match as the original's do

A copy's faces carry the instance after the name, after any piece qualifier
(`top#[left,slot:a]@F9.1`). A stored piece name of a copy whose bounding faces have changed since
finds no face of the copy at all (None at the first assertion), where the original's identical
name matches by its stem. On a real part: the joint ends on a patterned copy fall back to their
picks after a size change, the original's resolve by name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Names: a pattern copy's piece names match as the original's do

Problem: a pattern's copy names its faces after the original's with the instance appended
after any piece qualifier (`top#[left,slot:a]@F9.1`). The piece parser expects a qualified name
to end with its qualifier, so a copy's name was its own stem: when the faces around a piece
changed, a stored name of a copy matched no face of the copy at all, where the original's
identical name still matched by its stem. Joint ends on a patterned part fell back to their picks
after a size change and flipped to the other end of their holes.

Solution: `history_names::matches` takes the pattern instances off the end of both names first
and compares the rest as before, within the same copy only (equal instances; an original's name
never matches a copy's face, nor one copy's another's).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:47 +00:00
NOWN-DEVandClaude Opus 5.5 f54ad0f12f Configurations: a parameter edit runs the suppression rules whose condition reads what changed (#6303)
* Test: a switch parameter alone switches the features its rules suppress

Configuration rules that switch features' suppression from a parameter (drive_suppression when
`on` = 0) ran only on config.activate: a plain parameters.change of the switch left the features
as they were, so a script had to activate a row for every change. Red until the fix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Configurations: a parameter edit runs the suppression rules whose condition reads what changed

Problem: configuration rules ran only when a row was activated or a configuration edited. A
design that switches features on and off by a parameter (a rule that suppresses a feature when
the parameter is 0) did not follow a parameters.change of that parameter.

Solution: parameters.change (one parameter or several) runs, before the rebuild, the enabled
rules that switch a feature's suppression and whose condition reads a parameter whose value
changed (or a feature switched earlier in the same pass), in their order as activation applies
them, and lists them as `switched`. Driven parameters and restrictions still wait for a
configuration edit or activation; a rule whose condition reads nothing that changed leaves a
hand-set suppression alone; a rule that cannot be evaluated is skipped and never blocks the edit.
One undo step with the edit. docs/configurations.md says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:44 +00:00
semmelrindeandClaude Opus 5.5 43f21e8fec Sketch drag: a live frame stops once its numerical solves have done their share (#6330)
A live drag frame shares one work budget between its held solves, but
only their cluster decomposition was charged. The numerical solve (LM)
ran outside it, so in a larger sketch where the geometry can't follow
the cursor, one frame ran 64 failing held solves of about 150 ms each:
10 s per frame (68 points, 50 curves, 58 constraints, found by
randomised sketch editing). The frame budget now also counts the LM
work of its held solves, without stopping a solve: once a frame's share
is spent, the drag takes no more steps in that frame, keeps what it
reached and asks for the next frame (retry), as the viewport already
handles. The same drag now takes about 0.3 s per frame. Solves outside
live frames are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:42 +00:00
semmelrindeandClaude Opus 5.5 3e1f1a89f8 Assemblies: owners of bodies looked up once per placement pass, body frames only when picked (#6356)
Placing a design's bodies asked each body's owning component once per
placement, and each answer searched the features for the one that made
the body: placements x bodies x features on every command, twice (the
world state and the frames that map a command's picks into components).
Document::model_body_components answers for all bodies at once, and
world_state_reusing and body_frames_with_source use it. The engine's
frames now work out the per-body table only when a command picks a body
or names one; most commands pick none.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:39 +00:00
semmelrindeandClaude Opus 5.5 82253c6f35 Expressions: remember what an expression names and a constant parameter's value (#6360)
Every evaluation fingerprints every feature by the parameters its
expressions name, and works out every parameter, and most of them (named
feature inputs) are literal values such as "10 mm". In a design built
command by command both were lexed and parsed again on every command.
references() now keeps its answers per thread (bounded), eval_params
keeps its last few results for identical definitions (compared in full),
and a parameter that names no other is evaluated once per expression,
unit and design length unit.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:37 +00:00
NOWN-DEVandClaude Opus 5.5 f4d937d8a2 parts: a standard part's sketches are fully defined (#6376)
A standard part (a nut, washer, bolt, screw, pin or bearing) drew its sketches without
constraints, so each was left with free degrees: 3 for a hex, 8 to 12 for a revolved outline.
A check of a design that holds parts listed every one of them as not fully defined. The part
builder now fixes each sketch's points and curves before finishing it: the outline is the
part's size, and a resize builds it again the same way.


Claude-Session: https://claude.ai/code/session_01XhgPofrmFDeLvMhar6Wsqw

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:34 +00:00
semmelrindeandClaude Opus 5.5 75fb613e25 Names: a new feature's and input's number found without searching the design per number (#6377)
A new feature is named after the first free number of its stem
(Cylinder1, Cylinder2 …), and every number tried searched all features'
names: the thousandth cylinder of a design tried a thousand names against
a thousand features. A new input's dN name likewise wrote out every d1,
d2 … it tried. Both now gather the numbers taken after their stem once
(params::numbers_after, which counts only names written as the number
is) and take the first number not among them. The names are the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:31 +00:00
semmelrindeandClaude Opus 5.5 ce614044a7 Evaluation: a feature's fingerprint text is written only when the feature changed (#6397)
Every evaluation fingerprints every feature by its JSON, so a design
built command by command wrote all of its features out as JSON on every
command. The text is now kept (per thread, by feature id) with the
feature it was written from, and written again only when the feature
differs; the text hashed is the same, so the fingerprints are too.
Imports, whose text depends on their STEP digest, are written each time
as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:29 +00:00