Commit Graph
3176 Commits
Author SHA1 Message Date
taylorhayis ff2ca2d462 Keep focus when correcting an invalid parameter name (#3965) (#4000)
* claim: #3965

* Parameters: a click can correct an invalid name (#3965)

Refusing the new row was putting focus back on the field being left, so the correction was typed into the expression.

* Parameters: the invalid-name test types its expression draft (#3965)

A new row starts with a blank expression, so the regression test types 10 mm and checks that correcting the name leaves that draft in place.
2026-10-25 22:42:30 +00:00
ab80a410a1 Viewport theme: a light 3D view in a dark window, and the reverse (#4146) (#4147)
* claim: #4146

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: a light 3D view in a dark window, and the reverse (#4146)

Preferences › Interface › Theme gets a Viewport row under the theme tiles:
Follow theme (the default, as before), Light or Dark. Light or Dark draws
the 3D view in the built-in Light or Dark theme's colours whatever the
window uses, so a dark window can show the model on a light view and the
other way round; it works with every theme, theme files included.

The view takes the background and grid, bodies, selection and hover, the
origin, previews, sketches with their dimensions and glyphs, the navigation
cube and triads, box selection and the analysis colours. Panels, dialogs,
menus and the chips over the view keep the window's. Text and warnings drawn
straight onto the view (the sketch status line, the loose-end and midpoint
markers, the section's cut outlines, the 3D sketch tool and the sketch tools'
previews) take the view's side, so they read on its background.

theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light
or dark; an unknown saved value reads as Follow theme, as ColorVision's
does). Tokens::get() takes the view's colours from the other side only when
the view's dark or light differs from the window's; Tokens::view() is the
view's side for colours drawn onto it. The ground shadow follows the view
(the scene and highlight caches already key on the colours themselves),
ui.render draws in the view's colours, and ui.prefs takes `viewport_theme`
and reports `viewport_dark`. An older release ignores the setting and draws
everything in the theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: follow the single set of axis colours

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 22:17:04 +00:00
leValdemar19andClaude Opus 5.5 b94692497e Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: arc length from an arc and its end point (#754)

The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:17:01 +00:00
ArminandArmin 7bcc1ee0eb Drawing: shared number formatter (#5290) (#5315)
* claim: #5290

* doc: add configurable decimal number formatter (#5290)

---------

Co-authored-by: Armin <192400139+armin0411@users.noreply.github.com>
2026-10-25 22:11:39 +00:00
raykholo 36a60a70d9 Graphics: 1x anti-aliasing where the multisampled view draws nothing (#5819, #5870) (#5832) 2026-10-25 22:10:04 +00:00
5d17fa970b Sketch: hovering a circle's edge wakes its centre (#5043)
* Sketch: hovering a circle's edge wakes its centre

A circle's or arc's centre was hard to take with Line or Dimension: it is a small
point in the middle of empty space, taken only within 8 points of the pointer, and
nothing showed where it was. Hovering a circle or arc of the sketch being edited
now wakes its centre: drawn (a cross in a ring) and taken from 16 points away, so
the pointer can go from the edge across the inside to it. Hovering another curve
or point puts it back to sleep, as does leaving the sketch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A woken centre's extra reach yields to a curve under the pointer

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:57:23 +00:00
b5bab3f663 Browser: surface bodies get the surface icon in the Bodies folder (#4165) (#4168)
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)

Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.

Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add the surface icon to the requested-icons manifest

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:51:02 +00:00
Steven HuffandClaude Sonnet 5.5 ccea34e73c sketch: a tangent whose contact is tied by Coincident, PointOnCurve or Midpoint is solved at the contact (#2584)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 21:37:51 +00:00
c7f86c7309 Look At in the viewport context menu for a planar face or plane (#4105) (#4497)
* Look At in the viewport context menu for a planar face or plane

Fixes #4105

* Look At tests: turn the camera without the animation

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:37 +00:00
4355d117ef Assistant: warn when an Ollama model has no tool support (#4846) (#4916)
* claim: #4846

* Warn when Ollama models lack tool support (#4846)

Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.

Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.

* Keep the Ollama capability probe out of the web build

The panel never calls it there, so it would only be dead code.

* Wrap the model warning instead of cutting it off

In a narrow panel the end of the sentence, the part that says what to do, was truncated.

* Fix AgentConfig default after rebase onto main

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the Ollama no-tools warning into a pending locale file with ja and zh

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:30 +00:00
dudedagger42andClaude Opus 5.5 39951a22ff Loft: a sketch point picked in the window is an apex (#4830) (#5207)
solid.loft already closes to a point (a section {sketch, point}), but the Loft
window's Profiles input took profiles only, so a pyramid or cone tip couldn't
be made from the UI. The input now also takes a finished sketch's point, sent
as an apex section in pick order; profiles of one sketch still make one
section.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:17:14 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
5fbe058051 Sketch: a click picks the sketch's own curve over a projected one under it (#5257) (#5260)
* Sketch: a click picks the sketch's own curve over a projected one under it

* Select Other tests: follow origin visibility rename

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Own-curve pick test: click away from the lines' midpoints, which are picks of their own now

* Use the select-other test helpers main already has

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:10 +00:00
DuBearteandClaude Opus 5.5 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
dba8108369 Timeline: a reorder evaluates the design once, from the cache it already has (#6186) (#6187)
* claim: #6186

* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)

timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Marker is Copy: drop the clone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:55:52 +00:00
bherbruckandClaude Opus 5.5 57d787f5ba Docs site: canonical links, robots.txt and sitemap.xml (#6888)
Search Console lists docs.solidcraft.io/, /introduction.html (the same page) and /guide/mcp.html as duplicates without a user-selected canonical. The Pages build now adds a canonical link to every book page (index.html and introduction.html both name /), skips the redirect stubs that already have one, marks 404 and the toc frame noindex, and writes a robots.txt pointing at a generated sitemap.xml.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:35:56 -04:00
bherbruckandClaude Opus 5.5 8e61eb7d6f Release 0.23.0: version bump, design format 37 (#6868)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:18:36 -04:00
2eaa15ea04 Context menu: a right-click on a face of a selected body keeps the selection (#5849) (#5915)
* claim: #5849

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Context menu: a right-click on a face of a selected body keeps the selection (#5849)

A right-click selects what is under the cursor first, so the menu is about it. The check
for "already selected" compared the pick with each selected item by identity, so a face
of a selected body never matched: right-clicking a face of a selected body replaced the
whole selection with that one face, and the face menu opened instead of the body menu.

A face, edge or vertex of a selected body now counts as part of the selection, whether the
body is selected on its own or through an occurrence. The right-click then leaves the
selection alone, as it already did for a face in a multi-selection of faces (#3733).

selection::same_item is unchanged: dialogs and Select Other compare picks with it, and
there a face of a selected body is a different pick.

Fixes #5849.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Pass the held keys in the selected-body context menu test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:41:52 +00:00
f512d4a004 Move: placements of one part moved together each go the way asked (#4768) (#4849)
* Move: placements of one part moved together each go the way asked (#4768)

A part placed more than once (an imported assembly's corners, screws or
fan blades) is one body in its component. Moving several of its
placements together moved that body once per placement listed, each
placement turning the move its own way, so the copies flew apart.

When solid.move names one part through two or more placements, it now
moves those placements in the world, as occurrence.move does with space
world: a placement held by a rigid group (an imported assembly) moves with
the outermost placement holding it, one inside another being moved isn't
moved again, and root-component bodies listed are moved as bodies, all in
one undo step. Other moves are unchanged, and so is a move with copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Free the grounded first part before the placement-move tests move it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:28:06 +00:00
github-actions[bot] 62d55c3b29 Regenerate generated files and fold pending files [skip ci] 2026-10-25 21:31:35 +00:00
NOWN-DEVandClaude Opus 5.5 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
NOWN-DEVandClaude Opus 5.5 111dbc6855 Render: the radiance bound check uses a range, as clippy 1.97 asks (#6650)
`cargo clippy --workspace --all-targets -- -D warnings` fails on Rust 1.97: the
reflection radiance bound in crates/render/src/raytrace/image.rs (#5494) trips
`clippy::manual_range_contains` (`v < 0.0 || v > 1e12`).

It now reads `!(0.0..=1e12).contains(&v)`. The two differ only for NaN, which the
`is_finite` check in front of it already refuses, so nothing else changes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:23:04 +00:00
ab7602fd0e Project: don't lay a second copy over geometry the sketch already shows (#4929)
* Project: don't lay a second copy over geometry the sketch already shows

A sketch on a face already holds the face's border, linked. Projecting that face
again, or one of the border's edges, added a second set of curves and points over
the first: on a rounded corner that shows as extra points and lines. Project now
skips a reference whose curves are all linked into the sketch already (lines,
circles, arcs), reports it as `already_projected`, and refuses a pick of nothing
new so it adds no undo step. Points on their own (the origin, a vertex) still
project.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Projecting the face a sketch already shows adds no second copy in the face scenario

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:13:46 +00:00
HiroKenEzandClaude Opus 5.5 b1d4293cf0 One set of X, Y and Z colours for the origin axes, view triad and Move gizmo (#976) (#4430)
* claim: #976

* One set of X, Y and Z colours for every axis (#976)

The origin axes, the navigation cube's triad, 3D sketch triads and joint
origins drew `axis_x/y/z` (255,0,0 / 0,255,0 / 2,2,248), the view triad and
the headless picture drew `triad` (220,60,60 / 60,170,60 / 60,100,230) and
the Move gizmo drew `gizmo` (225,70,60 / 80,190,80 / 70,130,240). The
`triad` and `gizmo` tokens are gone: every axis reads `axis_x/y/z`, now the
view triad's values (the engine's `view::colors::AXIS_*`, so headless
pictures are unchanged, and the set the red-green table was measured for).
Older theme files' `triad` and `gizmo` lists still read and set the axes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:59:36 +00:00
99d5b43024 Doc: the names of split faces no longer grow with every split (#5860) (#6045)
* claim: #5860

* Doc: stop the names of split faces from growing with every split

* Joints: the long-piece-name test takes the longest name a piece now gets

Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:58:56 +00:00
raykholo f937905cf3 A sketch point on the origin can be dragged (#4719) (#4837) 2026-10-25 19:37:01 +00:00
raykholo 46f7d4d8dc Preferences: the web app's Updates section says how it updates (#5496) (#5500) 2026-10-25 19:29:04 +00:00
bherbruckandClaude Opus 5.5 8071096a99 Docs: refresh every UI screenshot, GIF and video from the current UI (#6763)
* Docs: refresh every UI screenshot, GIF and video from the current UI

Re-record the README demo, the rover build, the sample plate and the class-A surface pictures
with 0.22.1 in the default dark theme. The demo script is fixed for the current sketch dimension
boxes and MCP file limits, and the rover replay and class-A pictures now have scripts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: cut the idle time out of the demo and rover recordings

The README demo plays at 6x and the rover replay at 15x with a constant-rate camera orbit, with the stretches where nothing on screen changes cut out by the new trim_idle.py.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:21:01 +00:00
raykholo d17b70241f Command dialogs keep the value field focused after a viewport click (#4643) (#4652) 2026-10-25 19:13:51 +00:00
raykholo fbe778a1e8 Rigid Group counts picked instances and explains bodies in one component (#4790) (#4792) 2026-10-25 19:13:48 +00:00
momysnowandClaude Opus 5.5 0252f0bf30 Render preview: test that it never paints the last Design frame (#5119) (#5120)
#5187 fixed the frozen Render preview: product frames now set ss_ready
themselves instead of keeping the flag from the last Design frame, so
paint() no longer blits that stale offscreen picture. Nothing tested it.

The new test draws a see-through Design frame (offscreen, for
order-independent transparency) and then an opaque product frame on the
same renderer, and checks the middle pixel shows the product. With the
product branch's ss_ready update removed it fails with the stale red
Design colour, [255, 129, 129, 255].

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:12:50 +00:00
633ce20563 i18n(uk): translate 188 pending messages (#4051)
* i18n(uk): translate 188 pending messages

Bring the Ukrainian catalog up to date with en.json after rebasing onto the latest main. Covers the crash-report form, AI preferences, preferences pages, solid tool help, free orbit and history controls. Keys stay sorted via cargo xtask lists.

* i18n(uk): translate 114 pending messages

Rebase onto the latest main and bring the Ukrainian catalog up to date with
en.json. The new messages cover the mouse-gesture editor and navigation
preset help, the frames and sheet-metal dialogs, fillet control radii, the
timeline folder actions, the motion keyframe controls, library appearance and
library file actions, and the measure dialog.

Also correct "Add Key" to "Додати ключовий кадр": the only user of that
message is the motion keyframe button, and the catalog already translates
"Keys" as keyframes.

Keys stay sorted; cargo xtask lists --check and the i18n catalog tests pass.

* Sort the Ukrainian catalogue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:10:13 +00:00
0c0c4db612 Home: a theme's File view follows its own colours where it sets none (#4868) (#4924)
* Home: a theme's File view follows its own colours where it sets none (#4868)

and no built-in theme sets them, so every theme kept Dark's or Light's blue rail and grey cards
under its own app bar and headings. A theme that leaves them unset now gets them from its own
palette: page and cards from its panel and dialog, the rail from its accent deepened as Dark's
and Light's are, the primary action from its soft accent, and each ink the one of its own colours
that reads best there. Dark and Light themselves are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Leave a theme that sets no colours as its base palette

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 19:05:48 +00:00
16bb97f065 I18n danish cad help 20261021 (#4223)
* i18n(da): complete upstream catalog and align CAD help terminology

Add 371 missing Danish translations, refresh changed source messages,
and independently rewrite six help descriptions from SolidCraft sources.
Preserve all 2397 keys, canonical ordering and placeholders.

* Sort the Danish catalogue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:59:18 +00:00
3e6c039985 Fix/recovery metadata bounds (#5578)
* test: cover malformed and unbounded recovery metadata

Add regression tests for oversized JSON, mismatched entry IDs, and
non-regular recovery metadata. These expose failures in the baseline
recovery reader before the implementation fix.

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>

* fix: bound recovery metadata reads and validate entry identity

Reject oversized and non-regular recovery metadata before reading it,
and bound the read if a file grows after inspection. Require each JSON
entry ID to match its filename for orphan listing and recovery loading,
preventing unrelated save paths from being attached to a recovered design.

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>

* Format recovery.rs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:49:55 +00:00
7734ba2300 Offset Face: split a periodic face off its seam first, as booleans already do (#6226) (#6227)
* claim: #6226

* Offset Face: split a face off its seam and try again, as booleans do (#6226)

A hole's wall arrives from a STEP file as one whole turn bounded by one wire that
runs along its seam twice, where SolidCraft builds the same wall as two halves.
Offset Face heals the body before it moves anything, and healing such a face
fails inside truck with `This wire is not simple`, so the panic guard turned the
whole operation into a kernel internal error. Since importing is how a part with
a hole usually arrives, Offset Face did not work on imported parts with holes at
all.

`seam_faces` already answers this for booleans: split every such face in two
along a plane through its axis, run the operation, and compose the history back
over the body as it was given. This gives the offset path the same retry.

- `seam_faces::one_body` is `boolean`'s answer for an operation that takes one
  body, with `needed_one` beside `needed`.
- `offset_faces` now does its healing, its face picking and its offset inside one
  closure, so the retry runs the whole of it on the split body; the first attempt
  is guarded, so the failure is an error the retry can act on rather than an
  unwind. The faces are picked per body, because the pieces are numbered
  differently once a face is split — the points do not move, so they pick the
  same surface either way.

The regression test is in `seam_faces_tests.rs`, beside the boolean ones: a
20 x 20 x 10 block with a 6 mm hole, read back from STEP, whose top moves 2 mm
and lands on the same volume as moving the built body's top, with its history
intact.

Checked against `main` before and after: the three kernel tests that fail here
(`blend::…seam_twice`, `step_in::…parallel_body_preparation`,
`tests::a_box_cut_round_a_small_hole…`) fail the same way without this change.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: CarlosKeese <dudukeese@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-10-25 18:49:44 +00:00
0e916ee598 Add Norwegian Bokmål interface translation (#4544) (#4556)
* claim: #4544

* Add Norwegian Bokmål translation

* Refresh Norwegian Bokmål translations against current main

* Drop Norwegian messages whose ids are no longer in the English catalogue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:49:00 +00:00
raykholo 87c9a37663 Cut and Intersect say which component holds the body they missed (#4639) (#4641) 2026-10-25 18:42:50 +00:00
10124c8ccf Redefine Sketch Plane names the plane a sketch is on now (#5103) (#5545)
* claim: #5103

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Redefine Sketch Plane names the plane a sketch is on now (#5103)

For a sketch with no body-face attachment the panel only said so. It now shows
a Current plane row: the origin plane, a construction plane's name, or the
plane it is offset from, turned from or flipped from. English, Japanese and
Chinese messages added.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop needless to_string calls in the plane name format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 18:42:24 +00:00
0870d6474a Themes: Okibi (dark) and Akari (light), from the Okibi design system (#5730) (#5731)
* Themes: Okibi (dark) and Akari (light), from the Okibi design system

Two built-in themes mapped from the Okibi design system v1.8
(https://kaievns.github.io/okibi-akiri-design-system-spec/): cool charcoal
ash with a single ember accent, and its warm-paper light twin. Every one of
the 156 colours is set, so nothing falls back to the Dark or Light palette.

* Give the Okibi and Akari themes an icon palette

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:42:19 +00:00
JK3D e9b9c8f697 Joints: apply a joint solve through indexes instead of searches (#6392) (#6393)
* claim: #6392

* perf: apply a joint solve with indexed joints and occurrences

Every change to a design re-solves its joints and applies the solution. Applying it searched
the joints for each value and, for each occurrence the solve places, searched the occurrences
for it and walked its parents' first occurrences by searching again.

Joints and occurrences are now indexed once, keeping the first of each id as the searches
found it, and the parents' transform is read through the index as the loop leaves it
(component_transform shares the walk, transform_through).

Synthetic design, headless (2000 components at the root with one component inside each, 4000
joints, a solution placing every occurrence): apply 14.1 -> 2.2 ms (median of 12).

The new test applies a solution that moves a component and the components inside it, and
checks each lands where the solution put it, read through its parent as the loop has just
moved it.
2026-10-25 18:42:10 +00:00
JK3D cbcf1fe716 component.list: group bodies, features and occurrences once (#6394) (#6395)
* claim: #6394

* perf: group bodies, features and occurrences once in component.list

component.list searched every body, every feature (three times) and every occurrence (twice)
for each component, so its cost grew with components times contents. Bodies, features,
occurrences and children are now grouped by component once, keeping their order, and each
component reads its own groups. The output is unchanged.

The new test lists nested components and checks each gets only its own bodies, features,
sketches, occurrences and children, in timeline order.
2026-10-25 18:42:06 +00:00
raykholo e21760e46d Sketch Move with a rotation swaps or drops horizontal and vertical constraints (#4645) (#4651) 2026-10-25 18:35:15 +00:00
raykholo df01e59716 Sketch: an x distance beside a y distance on the same points isn't refused (#4352) (#4387) 2026-10-25 18:27:40 +00:00
3045d0787e Dialog curve picks keep their sketch (#4057) (#4081)
* Dialog curve picks keep their sketch (#3726)

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Adapt context-menu test to Sel::SketchCurve's sketch field

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Path Flange picks keep their sketch too

Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:20:03 +00:00
raykholo d876f475a6 Sketch: a distance dimension of 0 keeps the sketch fully constrained (#4368) (#4397) 2026-10-25 18:19:55 +00:00
ef1a400bb3 Home: recent card no longer spins forever when its picture can't be made (#4655) (#4721)
* Home: stop a recent card spinning forever when its picture can't be made (#4655)

A recent design whose thumbnail job returned no picture (empty or unreadable design) kept the loading placeholder, which draws a spinner, with no retry. Record such keys as a terminal 'failed' state and draw a box placeholder instead; opening or saving the design clears it and tries again. Sample previews are untouched: a failed sample build still keeps its shipped picture.

* Format the gallery sample row

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:19:39 +00:00
JosephandClaude Opus 5.5 53c84eb3a7 Toolbar: a drop-down row's tooltip names its rebound key (#6290)
The row itself showed the key the command runs from (#1810), but its help
tooltip still named the default one.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:10:09 +00:00