* claim: #7643
* Web app: Import… reads shortcuts and theme files through vfs (#7643)
Import… on the Keyboard Shortcuts page and the theme strip's Import… tile
read the picked file with std::fs::read_to_string. In the browser a picked
file is kept in vfs's in-memory files under /upload/, and std::fs on
wasm32 is unsupported, so every import failed. Both now read through
vfs::read_to_string, capped (a theme file at theme_files::MAX_BYTES, a
shortcuts file at the new toolbar_custom::MAX_IMPORT_BYTES), like the
other imports. Natively it is the same file on the disk.
The new tests import a file outside a vfs folder scope (refused, nothing
imported) and inside it (imported). With std::fs both fail: the file
outside the scope is imported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
timeline.redefine evaluated every later feature in its trial session, then again in the session:
the evaluation cache keeps only the last few states of a design with large bodies, so the trial's
results were gone by then. The trial keeps them in the session's kept results (or its own), and
the session's evaluation takes them from there. EvalCache::with_budget gives tests a small cache.
* claim: #7152
* Preferences: the Colour vision preview shows the chosen mode again (#7152)
Since the preferences redesign the Colour vision section previewed a mode
with four status chips (Selected, Warning, Error, Done). No colour vision
mode changes those colours, so the chips looked the same in every mode.
The section shows the sample of what the modes recolour again (sketch
lines, axes, bends, Draft Analysis, a failed feature), drawn in the mode
being chosen (Tokens::get_in). The status chips stay as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7091
* Report a bug: scale a large window's screenshot down instead of refusing it (#7091)
A frame over 16 million pixels (a 6K display, a window across two 4K
screens) was refused with "Screenshot dimensions are unsupported", so the
report went out without its picture. Such a frame is now averaged down by
the smallest whole factor that fits.
The frame is also fitted to the longest side a texture can have: a frame
under the pixel limit but wider than the GPU's limit (three ultrawide
screens, 10320 x 1440, on a device limited to 8192) made the preview's
upload fail wgpu validation, and the window's device panics on that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Inspect: center of mass measures the world state, as Measure does (#5246)
inspect.center_of_mass read the model state, so in an assembly a moved
occurrence was measured where its bodies were made, a second placement
was left out, and a placed copy's world name was "no such bodies". It
now reads the world state, as inspect.measure does, and agrees with
component.properties' mass centre at uniform density.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Center of mass test: unground the placed part before moving it
Upstream now grounds a design's first part when it is made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6281
* assets: add Render appearance, library and paint icon drafts for owner review
* assets: add Render lighting, environment and light-type icon drafts for owner review
* assets: add Render camera, shot, frame and strip icon drafts for owner review
* assets: add Render output, result and compare icon drafts for owner review
* assets: list the Render icon drafts in the inventory and ATTRIBUTION
* assets: remake the Render light icons as one family with a shared dotted stem
* assets: remake the Render look icons around the lit look sphere
* assets: redraw the Render look icons so each action reads at a glance
* assets: record the owner's acceptance of the Render light icons
* assets: simplify the Render look icons and make Remove Override an alias of From Material
* assets: record the owner's acceptance of Render look icons
* assets: mark the removed look on From Material with a cross instead of an arrow
* assets: record the owner's acceptance of further Render icons
* assets: redraw the Render library, presets, environment, ground and backdrop icons
* assets: restore the first Render library and backdrop drawings and equalise the cube in the studio icons
* assets: record the owner's acceptance of the Render studio icons
* assets: redraw the Render camera and shot icons as one family
* assets: redraw the Render All Shots and Lens icons so they read at a glance
* assets: put the play badge back on the Render All Shots icon
* assets: redraw the Render output and result icons around one picture base
* assets: give Render Image its own play badge and enlarge the Compare handle
* assets: record the owner's acceptance of the Render output icons
* assets: describe the final Render icon drafts in RENDER_DRAFTS.md and ATTRIBUTION.md
* claim: #6281
* ui_kit: lit sphere thumbnail, cached and bounded
* ui_kit: look-chain widget (four steps, one active, empty steps dashed)
* ui_kit: add both to the gallery and the UI kit notes
* claim: #6281
* docs: record the Render workspace interaction design and implementation roadmap
* docs: plan the Render panels so each has one purpose
* docs: replace the tabs-and-ribbon plan with the stage-bar design
* docs: drop the note about the superseded draft
* docs: plan every Render panel and where each old control goes
* docs: defer the shared lighting rig, UI steps go first
* Patterns: a body of a moved component is copied where it is shown (#4763)
A pattern of bodies made outside the bodies' component (a screw's body patterned from the root)
moved each body's stored geometry, which is in its component's frame, by transforms in the
pattern's frame. The copies landed where the body sits before its component is placed: near the
origin, for every pattern kind. As Mirror does, each copy is now moved as the pattern moves the
body in the world and kept beside its source, in its component.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pattern test: unground the placed component before moving it
Upstream now grounds a design's first part when it is made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Hovering many bodies re-emits every edge in the highlight's colours. Each edge
interned its three colours into the palette again, each segment was written in
eight small appends, and segments without their faces' normals encoded the
same zero normals again. Lines are now one record, the edge colours are
interned once per highlight, the buffers are reserved per edge, and the shared
width word is worked out once.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The no-OIT glass cache compared the blocks' vertex and run buffers by address
without holding them, so a freed buffer's address could come back for other
contents. It now holds them and compares with Arc::ptr_eq.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Instanced placements were culled per view, but a block drew every body in it
whatever the camera saw. Blocks now keep each body's vertex span and box; when
the view changes, each class's runs are drawn without the bodies whose boxes
are out of the view. A block whose bodies are all in view draws its runs as
they are.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Arabic and Hebrew are complete catalogs since #3768, so
every_complete_catalog_carries_every_english_message fails a pull request
that adds an English message without them. The localization guide's list of
languages a new label needs now says so.
Co-authored-by: rootarchitect <7781866+rootarchitect@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4771
* Move/Copy takes a browser body the same way Combine does (#4771)
A body row feeds the dialog's active input through the same pick as a
click in the view, and does not replace the selection (#4452). A group,
the Bodies folder, or a component is that pick for every body in the
set. M and the Move/Copy button also start from a selected body or from
a component picked in the tree.
* claim: #3457
* Hebrew interface language with right-to-left text (#3457)
Adds a complete Hebrew catalog (assets/locales/he.json, original
translations) and registers `he`.
egui 0.36 shapes each font run with harfrust, so a run of Hebrew letters
is drawn right to left, but it places the runs of a line left to right in
stored order. The new `bidi` module runs the Unicode Bidirectional
Algorithm (unicode-bidi, MIT OR Apache-2.0) over each message of a
right-to-left catalog once, giving egui the runs in display order with
brackets mirrored and placeholders kept whole, while leaving each Hebrew
run's letters in reading order for the shaper. A test lays messages out
with a real Hebrew font and checks where the glyphs land.
Desktop builds append a system Hebrew font (Arial Hebrew / SF Hebrew,
Segoe UI / Arial, Noto Sans Hebrew / DejaVu Sans). Layout mirroring,
wrapped multi-line RTL paragraphs and a web Hebrew font are follow-ups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hebrew: translate the new Describe Command label; list he in the control protocol
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hebrew: catch up with main's catalog and the new ribbon (#3457)
- Translate the 258 messages main added since the branch was cut, drop
the 38 it removed (10 renamed ones keep their translation) and
retranslate the two whose English changed (toolbar → application bar).
- The timeline title is ציר הזמן, matching the glossary.
- Ribbon buttons split their labels into two lines from the start of
the string; Hebrew labels come in display order, so the first line
showed the end of the phrase ("חדשה / סקיצה"). For right-to-left
labels the first line now takes the words at the end of the string,
and a shortened line loses characters, and shows its ellipsis, on the
left. The word-boundary sweep checks Hebrew from the lines the galley
is built from, since epaint's right-to-left rows carry zero-width
glyphs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hebrew: after rebasing onto main, load the Hebrew face with the cached system fonts
main now searches the system fallback faces once (SystemFonts, on a thread);
the Hebrew face joins that search with its coverage check. Drop the three
camera-animation messages main removed (#4296) from the Hebrew catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hebrew: translate the messages main added after the catch-up (#3457)
Translates the messages main added since the last catch-up: the history
bar's buttons and name toggles, the 3D mouse driver and axis mapping, the
thread size columns, the File view (home page), the redesigned Preferences, the new issue report
dialog, free orbit and the assistant's setup card. Drops the one message
main removed. The catalog has every English message again, so the
complete-catalog checks pass for he.
* Arabic interface language (right-to-left, on the Hebrew bidi path)
Adds an original Arabic translation of the whole English catalog
(assets/locales/ar.json, every message) and registers it. `ar` joins the
complete catalogs, so a message added to en.json later fails the build
until it is translated. It goes through the right-to-left path of #3458
unchanged: crate::bidi puts each message in display order and leaves
every Arabic word's letters in reading order for harfrust, which joins
them with the font's own tables. Ribbon labels use the right-to-left line
split from the same stack.
fonts.rs adds a system Arabic fallback after the Latin interface font,
which keeps spaces, digits and Latin text so each Arabic word stays one
shaped run: Segoe UI/Tahoma/Arial on Windows, SF Arabic/Geeza Pro/
Damascus/Tahoma on macOS, Noto Sans or Naskh Arabic/KACST One/DejaVu Sans
on Linux, or NotoSansArabic-Regular.ttf in CRAFT_FONTS_DIR. It is the first
fallback for an Arabic UI (Arial Unicode, a CJK candidate, has Arabic
letters without joining data) and the last otherwise; like Thai and
Hebrew it is never promoted for a CJK interface.
Tests: the catalog comes back in display order with no directional
controls, and Arabic laid out with a real font lands on screen word by word
in reading order.
* Hebrew: review the catch-up translations; restore the camera-animation messages (#3457)
- Review of the 533 messages translated in the previous commit: 21
corrected. Keys in the motion dialog are keyframes (נקודות מפתח, as
in Add Key), the Design workspace is תכן as in its label, a dropped
"(Direct Driver)" is restored, terms aligned with the rest of the
catalog (פורמט, סוכן קוד, רצועת הכלים), and a few calques reworded.
- Translate ui.animate_view_changes, ui.animation_speed and
ui.look_at_anim_desc, which main has again, so he stays complete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic and Hebrew: translate the messages main added since (#3457, #3762)
Both catalogs again carry every English message. The 760 messages main added
since the last rebase (render workspace, material editor, standard views,
sheet metal Path Flange, AI app connections, document-on-disk notices and
more) come from A-AL-ANAZI's translations on #3768; the five Perforate dialog
messages are new here. The earlier Hebrew review is kept on top of them, and
33 of the new Hebrew messages are corrected: "completed" was "perfect"
(מושלם → גמור), Regrade read as ranking (now תיקון צבע מחדש), shaders,
guarantee, the Mirror reflection mode, simulations and displacement.
Co-authored-by: Abdullah <alksa2025@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic and Hebrew: attribution rows as a pending file
main now takes new ATTRIBUTION.md rows as one file per change
(attribution/pending/), so the he.json and ar.json rows move there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic and Hebrew: translate the 23 messages main added since (#3457, #3762)
Both catalogs again carry every English message; the two theme-page messages
main removed are dropped. Twelve of the new messages (link updates while
loading, the agent chat's model choice, plugin search, render quality) come
from A-AL-ANAZI's translations on #3768; the sketch plane descriptions, the
rigid group and empty-boolean messages, free sketch points and the web update
note are new here.
Co-authored-by: Abdullah <alksa2025@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic and Hebrew: translate the 12 messages main added since (#3457, #3762)
Eleven come from A-AL-ANAZI's #3768; "Turn Up Axis" in Hebrew follows the
catalog's existing up-axis wording, and the agent chat's no-tool-call message
is new in both.
Co-authored-by: Abdullah <alksa2025@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic and Hebrew: translate the 22 messages main added since (#3457, #3762)
* Arabic and Hebrew: a label found by its English text comes back in display order too (#3457, #3762)
* Arabic and Hebrew: translate the 32 messages main added since (#3457, #3762)
* Arabic and Hebrew: translate the 34 messages main added since (#3457, #3762)
* Arabic and Hebrew: translate the 30 messages main added since (#3457, #3762)
* Arabic and Hebrew: translate the 7 messages main added since (#3457, #3762)
---------
Co-authored-by: rootarchitect <7781866+rootarchitect@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Abdullah alanazi <x1700@MacBook-Air-Abdullah-2.local>
* claim: #6943 free orbit Shift snapping
* fix(ui): snap free orbit direction and roll with Shift
* test(ui): align free orbit coverage and complete snap help translations
Evaluation and placement never read appearances, yet an appearance edit
re-evaluated the model and placed every occurrence again. A whole-document
proof that only appearances changed now takes the existing render-only refresh,
which keeps the model and retargets the world-placement cache.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Sketch Transform: scale, turn and move sketch entities in one command and one undo
sketch.transform scales about a centre, turns about it, then moves; the window and its
handles for existing sketch geometry build on it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Transform window: one box with handles to scale, move and turn what is picked
Select curves and points in a sketch and press G (or Transform in the Modify panel or the
context menu): the picks get a box with a handle at each corner to scale (the opposite corner
stays), the box to move and a knob above it to turn (Shift snaps to 15 degrees). Position,
Width, Height, Scale and Angle in the window are the same values, to type exactly; OK applies
it as one step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Transform: follow the sketch field of Sel::SketchCurve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5542
* Reopen the designs that were open at the last quit (#5542)
A launch with no file to open reopens the saved designs that were open
when SolidCraft was last closed, in tab order. Designs never saved and
files that are gone are skipped. Preferences > General > Reopen designs
turns it off; a launch driven over --control or with --sample starts fresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new messages to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Each command that names a body (appearance, material, move, ...) mapped it to
its component's own name by working out every placed body's world name and
frame, so a command on a large assembly cost a walk of the whole design. The
list is now kept with the world-placement cache while it is current.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Naming a placed body scanned every occurrence and body of the design, so the
world state and every caller naming all placed bodies grew with bodies times
design size. WorldNames indexes the design once and names each body in time
proportional to its occurrence path; one naming routine serves both it and the
single-body scan. Names are unchanged (a test compares them with the scanning
implementation).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: palette-indexed scene and incremental appearance updates
- Move triangle, line and instance colours and opacity into a per-scene
palette (an R32Uint texture, WebGL2-safe); appearance edits update
palette entries instead of vertex bytes.
- Build CPU body triangles as one canonical vertex stream per block with
opaque/glass/faded index lists; an opacity class change rewrites only
the index list.
- Cache resolved body appearances by a per-body key, so an edit resolves
only the bodies whose look changed.
- Split the model scene key from the session revision: selection and
view-only commands no longer rebuild or upload the model scene.
- Replace the O(n^2) section-index lookup and per-placement instance scan
with hash lookups.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: skip unchanged palette work when rebuilding
- Reuse each body's appearance key while the document is unchanged.
- Leave a palette slot alone when its value did not change, and allocate
every body's slots once before the build loop.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: measure scene rebuild cost by edit kind
An ignored scale test times the scene build after selection, appearance,
theme and one-body geometry edits at 200, 1,000 and 5,000 bodies.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: read faded grid alphas through the scene palette
The grid-fade tests now resolve line palette indices instead of reading the
line record's old colour byte.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: measure rebuild cost on few large meshes
Adds the 20/100-torus case where a block rebuild used to re-emit a large
part of the model.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: measure rebuild cost on an assembly
Unique detailed parts plus one component placed many times, timed for
selection, part and component colour, opacity, theme, hide and move.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw block classes as vertex runs, not index lists
A body's vertices are three per triangle in mesh order, so each draw class
is a few runs of the block's vertex buffer: all-opaque blocks need no index
buffer, and an opacity class change uploads nothing. A fragmented class
(more than 64 runs) falls back to one index buffer.
Each triangle is written as one record into a block reserved up front,
which takes the cold scene build of a 7.1M-triangle assembly from 97 ms
to 55 ms (main: 83 ms).
Also fix reindexing a block whose bodies are drawn elsewhere: it walked
the mesh's triangles from that body's start, past its own vertices.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw the highlight's own block, and light faded bodies without copies
The highlight scene keeps its feedback (a hovered face, a body copied on
the CPU) in a block of its own; since blocks became vertex runs, only the
model's blocks were drawn, so that feedback was uploaded and never shown.
Draw the highlight's blocks with its triangles.
Whole faded and see-through bodies (another component active, or an
appearance below full opacity) were lit by copying every triangle on the
CPU at each hover change: 85 ms for a design row of 812 bodies. They are
now drawn again from the model's own block vertices, in the highlight
palette with their slots set to the highlight colour, or as placements of
the model's shared triangles. The picture is the same as the copy's.
Adds a GPU frame benchmark for document-tree hover (ignored test).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: count scene uploads, and keep the sorted glass stream across colour edits
Renderer::uploads reports the bytes the model scene's last change uploaded
(geometry, placements, palette rows, planned colours, re-evaluated vertices).
Without order-independent transparency the global glass stream is kept while
the blocks' see-through triangles are the same, so a colour edit on a glass
body uploads palette rows only. Tests assert both on a GPU.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: keep palette slots and looks without rehashing every body
A rebuild found every body's palette slots by name and wrote them back,
allocating and hashing a new key per body, and copied every shown name into a
set to check the arena still belongs to the design. Slots are written back only
when a body's faces grew, and the looks cache is pruned only when it holds more
bodies than are shown. Adds the STEP-file benchmark (SOLIDCRAFT_SCALE_STEP) and
the colour command's own time to the assembly benchmark.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: round-pick construction lines through the scene palette
The axis and centre feedback for round picks (#4610) drew with a raw colour;
on the palette scene it is interned once like the other construction geometry.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw faded and see-through bodies from their plans with OIT
A body faded outside the active component, or see-through, left the GPU
tessellation path and was built triangle by triangle on the CPU, so working in
a component of a large assembly rebuilt every other body. Where the renderer
blends see-through surfaces order-independently (GpuTarget::oit, set by the
renderer), a body whose faces share one class is drawn from its plan: chunks
are split by class, opaque passes, AO and the section draw only opaque chunks,
and the OIT pass draws the rest. The sorted fallback keeps them on the CPU.
The model and its highlights decide through one rule (model_plan_class).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* Move the design-link path helpers into one module
`component_link.rs`'s path rules for links to other design files (base_dir,
absolute, relative, stored, resolve, rebased) move, unchanged, into
`cmd/design_link.rs` with their test, so other kinds of link (#3891's drawing
files, linked parameters #5354, #5113's extract) share them instead of copying
or re-exporting them. No change in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* design_link: keep base_dir and relative private
Only design_link.rs uses them; the module's surface is absolute, stored, resolve and rebased (review on #5420).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* component_link: import Document after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Carel Theron <careltheron@Carels-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #6861 eval scripts on input designs
* fix(cli): evaluate scripts on the input design (#6861)
* fix(cli): validate eval options before opening inputs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6608
* Canvas: keep value boxes clear of the command window (#6608)
* Canvas: describe how value boxes clear the command window (#6608)
* Canvas: keep the value boxes clear of the gizmo handles (#6608)
* ui-egui: format the value box regression test (#6608)
* gpu: the startup MSAA check skips when there is no GPU adapter
The check needs a real adapter to draw the multisampled view and to
resolve it, so on a machine with no software Vulkan adapter it is
skipped, with the reason printed, instead of failing the build.
SOLIDCRAFT_REQUIRE_GPU=1 still makes a missing adapter a failure, as in
the CI job that has a software adapter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A cut (or intersect) that names no bodies went through every body it met,
hidden ones too: a body hidden to keep it out of the cut was cut anyway. When
some of the active component's bodies are hidden, the cut now stores the shown
ones as its targets, so the hidden bodies stay as they are, and stay so once
shown again (the model never depends on what is shown). With nothing hidden it
goes through every body it meets, as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Until a connection had shown the token, its first line (up to 16 MiB)
was parsed whole into a JSON value. A line of [0,0,...] that size is
hundreds of MB once parsed, so 16 connections without a token could
make the app run out of memory and lose unsaved work. The token is now
read from the request object without building the rest of it: other
fields are only skipped, and anything but an object with a string
token is refused as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Canvas to Sketch: trace a canvas image into a sketch on it (#3931)
New command canvas.to_sketch, offered as Canvas to Sketch in the canvas
context menu. It traces the canvas image (automatic Otsu threshold, light
drawings on dark backgrounds inverted) with interpolated marching squares
and Douglas-Peucker, and adds lines and cubic Bezier splines through Insert
SVG's add_geometry to a new sketch on the canvas plane, with the canvas'
width, centre, rotation and flip. Holes stay holes; one undo step.
The image's declared width x height is checked before decoding (at most
40 megapixels) and the decoder runs under image::Limits, since canvases
are capped by file size, not pixel count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2605
* Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443)
After the file is picked, an Insert SVG (or DXF) window sets the
drawing's X, Y offset and scale, with a live preview; OK adds it in one
step and Cancel adds nothing. The insert commands already took `at`
and `scale`; the window is what was missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert scenario: the picked drawing goes through the placement window (#2605)
`sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as
it was picked; it now checks the placement window first and adds it with
OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre
sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over
scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a
file's own size without inserting it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle
Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing
about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing
The preview gets its box with a handle at each corner (scales about the opposite corner,
aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees).
They edit the same X, Y, Scale and Angle the window shows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert handles: the move that comes with the release counts
A quick drag could stop short of the pointer's last position because the final move arrives
in the same frame as the release.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: the Drawing Size command's label in the catalogs
`sketch.drawing_bounds` came without a catalog entry, which the i18n
test requires (and the complete ja and zh catalogs with it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new messages to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2113
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crash reports: capture native crashes on macOS (#2113)
A signal handler for SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP and SIGABRT
writes the same <journal>.native.json as the Windows exception filter: the
signal, the faulting module and offset, the thread and a frame-pointer walk.
The next start reports it instead of "an unclean exit". The signal then goes
on to the previous handler or the default action, so macOS still writes its
own crash report.
native_crash_macos.rs joins the crash-safety skill's list of files that may
use unsafe (no safe API can catch these signals).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5641
* Cone primitive: solid.cone with base and top radius (#5641)
A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>