Conflicts kept both sides:
- eval.rs: main's thread-search change (#10227) moved into develop's eval_thread.rs; construction axis/point source bodies with the branch's fallible construction_state; main's identity shortcut in the branch's fallible placed().
- eval_more.rs: main's box helpers and beyond_cylinder_reach kept (main's cut and tap-marking code uses them), body_box meshing through Body::mesh.
- project3d/project.rs: SMLib meeting_edges kept; a face pick now takes its whole surface patch (#9009) through meeting_edges over a set of faces.
- frames.rs: main's split_move (#9660) with the branch's fallible to_local.
- ao.rs: main's draw_opaque with the branch's open-body triangles.
- dialogs.rs, move_preview.rs, viewport.rs: both sides.
- Generated files from main. Tests calling world_state() unwrap its Result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
A client could connect and send nothing, or only blank lines, and hold one of the 16 connection
seats for as long as it liked. All reads before the token now share one five-second deadline; the
connection is then closed without a reply. An authenticated connection may idle as before.
`solidcraft-cli mcp --connect` used to open a connection at start and hold it until the first tool
call. It now only checks that the app is there, and the first call connects.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Each round runs whole to its section square to its edge at its setback (the owner's rule, at
least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the
setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1.
Outside the box the sections span the body is the three strips', so its volume is theirs within
that box's. A later r3 round at the mitred corner makes the body all three at once make
(7928.142563938, 15 faces), as the engine and the model-cache tests have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
smlib b7e83cd7c: origin/develop (SMLib pin 5e8c9c1) and origin/main.
Conflicts, both sides kept:
- Cargo.toml: solidcore's pinned solidcore dependency beside main's solidcraft-testkit.
- tests/KNOWN_FAILING_TESTS: solidcore's default-kernel list kept (refreshed from this
merge's run in a following commit); smlib's list for SMLib 5e8c9c1 becomes
tests/KNOWN_FAILING_TESTS.smlib.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
The cache key did not name the kernel, so a design saved on solidcore opened under SOLIDCRAFT_KERNEL=smlib showed solidcore's bodies, and the other way round. Case fillets/report-fillet-concave-arc-and-front-top-edge-together-r7-solver-residues: saved on solidcore and opened on C++ gave volume 9446.261 (C++ evaluates 9453.338); saved on C++ and opened on solidcore gave 9453.338 (solidcore evaluates 9446.261). The manifest now records the kernel and a cache of another kernel, or of none, is a miss: the design is evaluated on the kernel in force.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
The hole and placement sections stay on main's Tools page and network locations on its General page; the geometry kernel section stays on the Design page. prepare_preferences refuses a kernel choice before main's checks. tests/KNOWN_FAILING_TESTS keeps solidcore's lines until rebuilt from a run on this tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
The process runs on one kernel, so `Choice` and the routing table (`Op`, `Overrides`,
SOLIDCRAFT_KERNEL_ROUTES) go, and every call asks `route::backend()`. SOLIDCRAFT_KERNEL takes smlib or
solidcore as before.
- The preference offers solidcore and SMLib. A saved `routed` loads as solidcore without an error;
asked for now, by ui.prefs or diagnostics.kernel, it is refused. Another unknown saved value stays
as saved and runs on the default, as it did.
- diagnostics.kernel answers {choice, environment}. `smlib` on a build without the C++ kernel, wasm
included, is refused as not available, never answered by the other kernel; a saved `smlib` there
says so on the status line and the preference page.
- The conversion between kernels stays: a body computed before the choice changed still needs it, and
so do the parity tests.
The notes' translations in 6 languages and the new message's are machine-written, not reviewed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Engine: open a design a feature at a time (#10198)
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: open a design a few features a frame, with progress and Cancel (#10198)
On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: design links and the files window open designs with progress and Cancel (#10198)
Design links (?open=URL, as embedded viewers use), the files window and
designs opened from the computer went through the one-shot open_path,
which froze the page on a large design. They now use the staged open; a
design link becomes an unsaved copy under the link's name once the open's
reply arrives (SolveApp::open_path_answered).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
main beb35029a (Release 0.29.0), develop 05f5e8601. Committed as resolved and
not yet compiling; fixes follow by layer.
Where the two sides could not both stay as written:
- Section caps: develop's stencil crossing count (with hatch by part) kept;
main's WINDING/NOT_CAP marking and its fs_solid_touch removed. main's #9407
test is kept and has to hold on the count.
- crates/kernel/src/prism.rs: develop's, which has no 3D prism boolean; main's
#6904 route has nothing to change there. Its test still has to be ported.
- Continuity legend: main's details card, with develop's G3/G4 classes.
- inspect.analysis one at a time: while main's "several analyses" preference is
set, turning one on leaves the others on.
- Model cache: FORMAT 8, since neither side's reader reads the other's records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* claim: #10138
* Follow the system language on a first start (#10138)
The language preference defaults to a new 'system' value: the OS locale
(sys-locale) is matched against the catalog list - exact tag, base
language, then English - and a System choice sits at the top of the
Preferences language list. A saved language still wins.
* Drop the explicit deref clippy flagged; regenerate THIRD-PARTY-LICENSES.txt for sys-locale
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #8341
Co-authored-by: Cursor <cursoragent@cursor.com>
* Graphics: keep a preferred card when surface marks it incompatible (#8341)
Prefer the saved adapter by exact then case-insensitive name, including when only listed as surface-incompatible, and explain in Preferences when another card is still in use.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format and clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Native files run on solidcore through its public api_files (each kernel reads the other's, in both
forms). face_points routes with Split, pcurves with Convert, and an ssi::Surface no longer needs the
C API: its arguments are checked here as the C API checks them, and the C side is made only when a
family on the C++ kernel asks. intersect, domain and evaluate have no solidcore path and refuse with
Error::NotOnSolidcore. Planar region booleans and the rig CLI no longer need the smlib feature.
Tests that exercise the C++ kernel opt in per thread (route::on_cpp), so parity tests keep comparing
two kernels instead of solidcore with itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: written to disk in the frame they change, not only at a clean exit (#8275)
eframe saves app.ron every 30 s and when the window closes normally. A
change made since the last save was lost whenever the app didn't close
normally: ended from the Task Manager, stopped by a sign-out or shutdown,
or crashed or hung in the graphics driver on the way out. The next start
then showed the old settings (View navigator back to Axes, Display quality
back to Normal).
The desktop app now writes its settings and flushes them in the frame they
change (frames with input and the one after), as the web app already does
(#8644). Unchanged settings are not written again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: write at most once a second, and only after input that can change them (#8275)
Review: pointer motion came in every frame while the mouse moved, so the
settings were serialized every frame; and some settings change in every frame
(a panel's width while its edge is dragged), which would have flushed app.ron
on the UI thread each frame. Only clicks, keys, text, paste, wheel and pinch
count as input now, and the file is written at most once per second: a change
made in between waits, a repaint is asked for when its second is over, and it
is written then, so an idle app still writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8776
* Crash reports: a window opened after startup no longer labels the run "during startup" (#8776)
egui-wgpu reports "window surface" and "surface configure" for every native
window, also the ones opened after startup, such as the agent chat in its own
window. Each one overwrote the journal's "running" phase, so a later unclean
exit was reported as "during startup (surface configure, N s after launch)".
crash::startup_step records a startup step only until the app runs, and the
app's egui-wgpu hook calls it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Since the body check mode became part of the evaluation context (9acbcf924),
evaluate digests the context with the mode, but Model::adopt still took the
context without it and the default mode: the first evaluation after opening a
design from its saved model saw another context and recomputed every feature
(undoing_an_edit_after_opening_reuses_the_saved_results,
rolling_the_marker_back_keeps_results_after_cache_eviction). The saved model
now records the mode it was evaluated under (thinned ones too), adopt takes
it and digests the context as evaluate does, and a session opening a design
under another mode evaluates it again rather than showing that mode's results.
Model cache format 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tests that asserted an older design rebuilds as the build that saved it made it
now assert what still holds: it opens, is upgraded, evaluates, round trips and
names alike every time, and a feature that lost a reference asks for it again.
- naming corpus: two builds still name every face and edge alike and find the
same faces with their stored names; a stored name that finds nothing must
leave its feature failed (it asks to reselect), never a feature that builds.
A sketch's face is found by its name as the sketch finds it.
- design corpus: the volumes, areas and bounds the saving builds recorded are
no longer compared; a corpus design may fail only by a request to reselect,
and undo leaves the features that failed on opening failed.
- fixed robustness seeds: no panic, valid bodies and volumes moving the right
way; a step the kernel refuses is not a bug.
- a format 28 design's pieces and a format 13 design's extra bodies: marked as
they open and named alike, without promising the numbers or names saved.
- action matrix baseline: the two corpus designs whose fillets, chamfer and
offset face held names saved before format 14 re-recorded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Face and edge names stored before format 14 were worked out from geometry and
open marked `?`. They were found among the names geometry gives today, as the
builds that saved them found them, pieces by the one nearest the pick. They
find nothing now: the feature holding one fails, asking for its reference to be
picked again, which stores its exact name. The legacy face and edge names a
body worked out for them are gone.
The tests that found such names as saved now assert the request to reselect:
a saved strip projection, a version 9 emboss on an annulus, a format 10 face
sketch and the corpus design named with numbered pieces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A face or edge name a feature stored finds only the face or edge it names: the
very name (or a synonym of that face), or the named piece told apart by the
faces around it. A face split into several pieces, merged into another face,
or left only as a face of the same stem is not the face that was picked, and a
name found on several bodies is told apart only by the body the reference's
point lies on. The fallbacks are gone: no piece nearest the pick, no merged
face, no edge at the picked point, no lost link that keeps its last geometry.
A feature whose stored reference finds nothing fails with DocError::Reselect:
blends, face points, sketch planes, sketch projection links, construction
references, hole reference edges, sheet bend edges and cylinder emboss.
The tests that asserted a fallback now assert the request to reselect: split
and removed fillet edges, a merged or rejoined face, a projected edge that was
split or is gone, a projection whose body went, saved strip projections after
wall coalescence, a fillet saved on a piece of a tapered side that is whole
now, a cut that starts from a piece that is no longer that piece, and a fillet
named on the lower of two stacked boxes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli run --validation MODE, kernel-cases --validation=MODE and
cargo xtask kernel-cases --validation MODE (with --ladder too), so the rig
runs under each mode.
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8315
* fix(control-server): release the watch seat deterministically (#8315)
The seat a subscribed connection holds on the DesignWatch lived in the
events thread alone, so it left the watch only when that thread ended:
on the first write a closed client refuses, which needs the design to
move, or when the thread noticed the end of the stream, which waits for
the connection's own thread to come out of its blocking read. A closed
connection could therefore keep counting on the watch for a second or
more, and the test that asks for the count to be gone could lose its
race with the ten seconds it waits.
The seat is now shared: it leaves the watch once, whichever thread sees
the connection's end first, the connection's own thread at the end of
the stream or the events thread at the first refused write. The count
of subscribed connections is right as soon as the connection is gone,
and the events a subscribed connection is told of do not change.
On Macs patched with OpenCore Legacy Patcher the OS reports a newer
macOS version than the GPU's Metal compiler supports, so wgpu picks a
shader standard the compiler refuses (`invalid value 'metal3.2'`) and
the window never draws.
The variable has to be set before the process starts, and Rust 2024
makes `set_var` unsafe (this crate denies unsafe code), so main()
now re-launches the binary with SYSTEM_VERSION_COMPAT=1 when the OCLP
NVRAM key (OCLP-Version) is present, and exits with the child's status.
A process that already has the variable set never re-launches, so
there is no loop and a user's own value is respected. If the check or
the spawn fails, startup continues normally.
Tested on an OCLP Mac: one re-launch message, graphics render
correctly; with SYSTEM_VERSION_COMPAT=1 set beforehand it does not
re-launch.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Help: add manual update checks and status window
* Test manual update checks and localized results
* Add update check to the native Help menu
* Localize Help update checks in all app languages
* Document manual update checks from Help
* Document ui.help updates control action
* claim: #8894
Co-authored-by: Cursor <cursoragent@cursor.com>
* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)
BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #7944
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Theme: System follows the desktop's dark/light setting on Linux (#7944)
On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
corpus_designs_rebuild_with_the_same_names_and_references compared every
corpus design with a text record of each body's face and edge counts and its
full name list, last written from truck's output (a55196e7a); 110 designs
differed only because SMLib keeps whole faces truck split in pieces. Those
counts and names are the kernel's, not an outcome.
The test, renamed corpus_designs_keep_their_references_and_name_alike_every_build,
now asserts invariants only, with no record:
- every design loads; one that does not is a failure naming the design and
the step (oracle/83-boundary-loop-thicken: surface.thicken, SMLib status
1001), not a record line;
- every name a design stores (fillet and chamfer edges, faces a feature
picks, a sketch's face, sheet metal edges) finds a face or edge: none
`gone`, no sketch face `lost`;
- two builds give the same name -> face map: each named face's area and
centre and each named edge's length and middle (to 1e-6 of their size), and
the same face or edge found for every stored name.
The design already exempt for unstable piece order
(regressions/closed_sweep_torus_cut) is still only printed for the second.
On develop it fails on two designs: oracle/83 above, and
regressions/cut_up_to_face_leaves_skin, whose Extrude13 face
`F47:top#[...]` finds nothing (the truck-era record had it `gone` too). All
159 designs name alike in both builds. The records in tests/naming/ are no
longer read; CONTRIBUTING no longer asks to re-record them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9195
* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)
A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.
Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)
The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.
`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.
A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)
With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
The kernel switch broke these tests only through their counts, which record how a kernel splits
faces rather than whether the result is right. Each now checks its intent:
- a fitted circle is the exact circle (centre, radius, a full turn), not "one segment";
- the tight bend sweeps a valid solid of Pappus' volume, πr²(40 + 5π/2), not a count of faces,
edges and vertices;
- the Pi case keeps each outer side one face, stays valid after every feature and rebuilds the
same topology at 32 whether built there or edited there, without a hard-coded table of totals;
- a certified paint stays on the wall's radius and covers as many faces after an edit, a copy
and reopening as when it was painted;
- the offset sleeve and the extended strip are checked by their exact areas only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9184
* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)
`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.
`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".
The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: a design-switching command is checked at the request's level
Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The README demo's Raspberry Pi case stands four standoffs on its floor: Extrude2's ring of
radius 3 round a 1.25 hole, patterned by RectangularPattern1. Each is its outer wall, its inner
wall, its top and the floor inside it: four faces. The recorded counts were truck's, which made
each cylindrical wall two halves (six faces a standoff): 25 after feature 6, 43 after the
pattern, and 8 more than now at every step after it. On SMLib each wall is one face closed on
its seam, and the counts are 23, 35, 35, 47, 47, 51, 51, 55, 71 from feature 6 on (the feature
names show it: F6:side:c1, F6:side:c2, F6:top and the floor piece bounded by F6:side:c2 per
standoff). The outer sides stay one face each, and (b) and (c) still agree step by step.
Fixes cli rebuild_topology::pi_case_faces_per_step_at_both_heights.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>