Commit Graph
919 Commits
Author SHA1 Message Date
AsTechEvolvesandClaude Opus 5.5 23587433e2 Assistant: say when a Claude reply hit the length limit or was declined, not that the model lacks tools (#9495) (#9500)
* claim: #9495

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assistant: say when a reply hit its length limit or was declined, not that the model lacks tools (#9495)

The API client never read why an answer stopped, so a Claude reply cut
off at max_tokens while thinking (its thinking text is empty by default),
or a refusal, ended the turn as normal with nothing said. The chat then
blamed tool support: "The model didn't use SolidCraft's tools".

Reply now carries the stop reason: Anthropic stop_reason max_tokens and
refusal, or OpenAI finish_reason length and content_filter and a message
refusal. Any other value is a normal end. The turn ends with that reason,
which already keeps the tool-calling notice away, and the chat shows
what happened in place of the raw "(max_tokens)", for ACP agents too. A
tool call cut off at the length limit has incomplete input, so it is
neither run nor kept in the history.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 18:56:14 +00:00
Kevin Ravensberg 295bd0e165 Render: fit the product inside the picture's frame, after the saved setup loads (#5763) (#5764)
While Frame shows the picture's frame, the preview projects into that frame
rather than the viewport, but Fit Product and the fit on entering Render
framed the product for the viewport's free area, so a picture taller than
wide cut the product at its sides. The fit now uses the viewport layout
seen from the frame (the frame as the viewport, the free area inside it
with the usual 16-point margin).

Entering Render fitted before the saved setup replaced the draft, so a cold
workspace with a portrait setup fitted for the old draft's aspect; the fit
now runs once the setup in effect is loaded.

render.camera.fit takes the picture's aspect (0.000001 to 1000000) through
Camera::fit_aspect, which publishes only a valid fitted camera: an aspect
that would divide the distance into infinity is refused and the previous
camera, document and undo stay as they were.
2026-10-30 18:30:45 +00:00
Nathan Dane ae998906ff Viewport: fold three status items into a summary badge (#8549) (#8558) 2026-10-30 17:33:23 +00:00
froglemonade2andClaude Opus 5.5 fc499441e2 Lost GPU: the old process exits instead of hanging in the driver, after the settings are saved (#9044) (#9054)
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:26:33 +00:00
GavinSchmidtandClaude Opus 5.5 0952686c1b Sheet metal: personal Sheet Metal Rules, saved in the profile and offered by every design's rule manager (#9346) (#9520)
* Sheet metal: personal rules library in the profile, offered by every design's rule manager

Adds personal_sheet_rules.rs and its tests, the personal_sheet_rules preference, and the rule manager wiring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Sheet metal: pending strings for personal rules

English and the complete catalogs (ar, he, ja, vi, zh), plus de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Docs: personal rules in the sheet metal guide

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

* Docs: glossary entry for personal sheet metal rule

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UqPNsVN9JQhyMReCXXsRSu

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:12:12 +00:00
0396b2d00a Model cache: a design with mesh bodies keeps its saved model (#9170) (#9218)
* claim: #9170

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Model cache: a design with mesh bodies keeps its saved model (#9170)

One mesh body (an inserted STL or 3MF, or a STEP part shown as a mesh of
its faces) left the model cache out for the whole design, so opening it
evaluated every feature again. The doc records refused mesh bodies, and
the native B-rep codec the io cache stores bodies with refuses them too.

Kernel work is paused, so the kernel is left alone: the io cache stores a
mesh body as its own slice kind (SCMESH01, a JSON header with the counts,
colour and paint, then the vertices as f64 and triangles as u32), read
back through mesh_body, with_color and with_paint. A mesh body is kept
only when its slice reads back as the same vertices bit for bit, the same
triangles, colour and paint. The decoder checks the counts against the
bytes before allocating. The picture shown while opening draws a mesh
body with its own triangles (native_preview_mesh refuses mesh bodies).

Cache version 4 -> 5; docs/design-container.md describes the mesh slice.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Model cache: decode mesh slices with as_chunks, as clippy asks

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-30 16:17:27 +00:00
github-actions[bot] bcdecd19f4 Regenerate generated files and fold pending files [skip ci] 2026-10-30 16:17:21 +00:00
Kai Evans f1c2f67d63 Quick measurement: the selection's length, area or distance in the view's corner (#7000) (#7513)
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)

With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.

* Quick measurement: off by default, turned on under Preferences > Interface (#7000)

The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
2026-10-30 15:46:01 +00:00
DuBearteandClaude Opus 5.5 5439bfc0b5 Expressions: a decimal comma inside plain parentheses (#9408) (#9447)
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:34:56 +00:00
Mario GeigerandClaude Opus 5.5 332f96c26a Point clouds: colour and filter by any property the file carries (#8816) (#8819)
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)

A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.

In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.

pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)

A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:02:29 +00:00
56e752c182 Toasts: a close (×) with a countdown ring instead of a Close button; a shorter 3D mouse driver label (#7971) (#8763)
* claim: #7971

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: a close (×) with a countdown ring instead of a Close button (#7971)

Every toast the user may close (the status, the 3D mouse offer and the
stand-up note) has a close (×) at its top right, handle toast:<name>:close,
in place of a Close button; it does what the button did, is a kit-drawn
button with an accessible name and hover text, reachable by Tab, and dead
behind an issue report. Toasts that go by themselves draw a thin ring
around it that shrinks over their time; pointing at the offer or the note
starts their time again, as before, so their ring is full while pointed at.

The 3D mouse offer keeps three buttons, Calibrate…, Use Direct Driver (the
detail in its tooltip) and Never show again, on one row: the corner
toasts are 400 points wide, as the row's estimated widths need 356.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: lay buttons out at their drawn widths; corner toasts 360 wide (#7971)

The toast's button rows used an estimate of each button's width that ran
about 40 points over the kit button as drawn, which wrapped the 3D mouse
offer's three buttons and left the main action short of the right edge.
Each button's drawn width is now remembered and the rows laid out with it
(the estimate stands in for the one frame before a button was first
drawn), so the main action is flush right; the corner width is the
smallest round one that fits the offer's three buttons in a row: 360.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: keep the analysis status test whole after rebasing onto main

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-30 13:48:29 +00:00
github-actions[bot] ab309f2219 Regenerate generated files and fold pending files [skip ci] 2026-10-30 15:05:46 +00:00
SvenCarstensen aff8106205 Help: check for updates and show results in the selected language (#8896)
* Help: add manual update checks and status window

* Test manual update checks and localized results

* Add update check to the native Help menu

* Localize Help update checks in all app languages

* Document manual update checks from Help

* Document ui.help updates control action
2026-10-30 13:41:00 +00:00
SilentWolf75andCursor 21340ba019 Web: Chinese UI loads a Chinese font (#8894) (#8981)
* claim: #8894

Co-authored-by: Cursor <cursoragent@cursor.com>

* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)

BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-30 13:33:23 +00:00
kaltenbrunnermarkusandMarkus Kaltenbrunner f331a0740b Model cache: write each set of sketch keys once, and build the states on threads (#9010)
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.

Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.

SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-30 13:28:16 +00:00
fkirillandKirill Frolov 12636b67be Select hidden geometry with Select Other and fit the list to the window (#5574) (#5577)
* claim: #5574

* Pick hidden geometry near long clicks in a five-row list (#5574)

* fix: make Select Other configurable and fit its list to the window

---------

Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
2026-10-30 13:25:56 +00:00
semmelrindeandClaude Opus 5.5 9f5ac92faa Saved model cache: keep fast opening after an update (#7168) (#7354)
* claim: #7168

* Saved model cache: keep fast opening after an update (#7168)

The model cache was read only by the exact build that wrote it (same app
version and commit), so every update evaluated every design again on its
first open. It is now keyed by the evaluation source instead: a digest of
the committed source the model is computed from (doc and the workspace
crates it is built from, the patched truck crates, locked external
dependencies, workspace build settings without the version, and the
cache reader), with the platform. An update that changed none of that
opens designs from their cache; one that changed any of it evaluates
them again, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:42 +00:00
PaddleStrokeandClaude Opus 5.5 6e39efd4ac Theme: System follows the desktop's dark/light setting on Linux GNOME (#7944) (#8123)
* claim: #7944

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Theme: System follows the desktop's dark/light setting on Linux (#7944)

On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:23 +00:00
C.VengelsandClaude Opus 5.5 3c40edd12a Print face: Send to Slicer lays a body on its marked face (#8429) (#8433)
* claim: #8429

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Send to Slicer lays a body on its marked face (#8429)

A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)

Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: a light tint in the viewport and its strength in Preferences (#8429)

Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:18 +00:00
Kai Evans 1754318df7 Browser: the visibility eye at the right end of each row (#8718) (#8720)
* claim: #8718

* Browser: the eye sits in a column at each row's right end (#8718)

Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.

* Docs: the browser's eye column and browser_eye_left (#8718)

* Browser: the eye's tip shows by the eye at the row's end (#8718)

* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)

The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.

* Tests: browser depth checks run on the default layout, by indent handles (#8718)
2026-10-30 13:24:22 +00:00
FrankandClaude Opus 5.5 4bc5bdc791 Reverse zoom direction no longer flips 3D mouse zoom (#8993) (#8994)
* claim: #8993

* Reverse zoom direction no longer flips 3D mouse zoom (#8993)

The checkbox sits under Wheel and trackpad and now reverses the wheel
(and the navigation bridge's wheel-style steps) only. The 3D mouse cap
zooms by its own per-axis invert switch alone: device_camera no longer
takes a reverse_zoom argument, nor does the test model in Preferences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:23:12 +00:00
FrankandClaude Opus 5.5 f59f6698f1 Ribbon drop-downs as a grid of large icons, as an option (#4739) (#5012)
* Ribbon drop-downs as a grid of large icons, as an option (#4739)

Preferences > Interface gets two settings, both off by default:

- Menus: List | Large icons. With Large icons a panel's drop-down shows its
  commands as rows of up to five icons at 32 px (twice the list's), keeping
  the list's group headings and order. The name, shortcut and help are in
  the tooltip, as on a ribbon button. Arrow keys move across and between
  rows; a click starts the command; right-click and drag pin it as before.
  Resting on an icon for two seconds arms a pin in its corner; a quicker
  click anywhere starts the command, so nothing is pinned by accident. A
  pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
  grid) leaves out the commands the ribbon shows as buttons; a panel too
  narrow for its buttons lists them again, and a menu is never left empty.

No icon artwork or colours change. Sketch > Create keeps its family list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch > Create in the large-icon grid: every variant under its family (#4739)

With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: groups side by side, no footer (#4739)

A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: a separator line between groups side by side (#4739)

As between the ribbon's sections: a 1 px line in the theme's border colour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: at most three rows, growing to the right (#4739)

A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: group headings centred over their icons (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)

Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)

With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:59:08 +00:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
Ahmad Khan 71bb4f7c98 Docs: a beginner's page for equation curves, with pictures and examples (#9282)
A new user guide page, Equation curves, under Sketching: the first curve step by step, Explicit and
Parametric explained with tables of rules to type (a line, a parabola, a wave, a circle, a spiral),
radians, parameters with the involute of a base circle, building a part (a closed flower curve
extruded), editing, and common mistakes. The technical details stay in a short section for scripts
and agents.

Seven pictures, rendered by `cargo xtask book` from new scripts in docs/book/scripts/equation-*.json
(gitignored output, attributed in attribution/pending/docs-equation-curves.md). The Sketching page
keeps a short summary and links to the new page.
2026-10-30 07:54:27 +00:00
Rick MorgansandClaude Opus 5.5 92af4a21c8 Control channel: a per-request param_check level, applied and confirmed by the app (#9184) (#9185)
* claim: #9184

* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)

`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.

`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".

The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Control channel: a design-switching command is checked at the request's level

Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:24:41 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
AsTechEvolvesandClaude Opus 5.5 94b399e98f Preference: keep the view when a sketch opens; Look At faces it on request (#9188) (#9190)
* claim: #9188

* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)

Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.

Changes a default: no

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 05:32:56 +00:00
github-actions[bot] 6e4e94a8a8 Regenerate generated files and fold pending files [skip ci] 2026-10-30 05:30:32 +00:00
github-actions[bot] ae2a5b2c0d Regenerate generated files and fold pending files [skip ci] 2026-10-30 05:24:44 +00:00
railconstrandrailconstr 81cbcef31c Sketch: add construction-line toolkit (#8239) (#8679)
Co-authored-by: railconstr <335242259+railconstr@users.noreply.github.com>
2026-10-30 05:02:54 +00:00
Derek Van AllenandClaude Opus 5.5 a66a517c40 Persistent naming: a proposal from a second implementation (#7990)
* Persistent naming: a proposal from a second implementation

A design proposal for the persistent-naming failures still open (#4341,
#5198, #5308, #5857, #5858, #5860, #5861), from building persistent naming
in Form Studio: fall back by lineage, never by geometry alone; a suppressed
maker is not a lost reference; names saved as structured one-level values;
ordinals from the feature, not the kernel's face order; split picks resolve
to all pieces; body identity apart from the display name. Documentation
only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Persistent naming proposal: body identity follows the #5308 plan

Change 6 now agrees with bluecmd's plan on #5308: an id minted from
next_id and stored per feature slot, better than the derived identity
the first version proposed. It adds that a stored id is only as stable
as the slot assignment, which today follows each lump's least face
name, and gives the lineage signature from the #5308 discussion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:17:54 +00:00
semmelrindeandClaude Opus 5.5 f3ee34d372 English: American spelling throughout the base catalog, British only in English (UK), and "1 body" (#9085) (#9194)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:16:23 +00:00
Colin Faulkingham d11d268597 Render: reject excessive pixel work during preflight (#5088) (#5728)
* claim: #5088

* fix: reject excessive render pixel work during preflight (#5088)
2026-10-30 01:35:12 +00:00
313d2bdb41 Sketch: snap where two recent centre and midpoint guides meet (#8694) (#8744)
* Sketch: snap where two recent centre and midpoint guides meet (#8694)

The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.

* Sketch: keep the recent-guide crossing snap off until asked (#8694)

The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.

* Sketch recent snap: ar/he/vi strings and clippy borrow fixes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:40:05 +00:00
Rick MorgansandClaude Opus 5.5 4a781b8cd8 MCP: --param-check checks calls to the running app (#9072) (#9073)
* claim: #9072

* MCP: --param-check checks calls to the running app (#9072)

`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:33:42 +00:00
github-actions[bot] f6393ef211 Regenerate generated files and fold pending files [skip ci] 2026-10-29 22:12:44 +00:00
Rick MorgansandClaude Opus 5.5 2356a63aea CLI: run takes --param-check (#6921) (#6924)
* claim: #6921

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run refuses unknown options and takes --param-check (#6921)

`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run's option check takes --param-check; warn on timed runs as steps complete

`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:40:30 +00:00
github-actions[bot] 1c673e38c7 Regenerate generated files and fold pending files [skip ci] 2026-10-29 19:31:29 +00:00
b43712cdb0 Command search: show a command's place in the ribbon, also inside section menus (#7287) (#7322)
* claim: #7287

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command search: show a command's place in the ribbon, also inside section menus (#7287)

Hovering a command result in Search commands switches the ribbon to the command's
tab and marks its button with its tooltip; a command that has no button there
opens its section's drop-down on its row instead. Leaving the results (or closing
the box) goes back to the tab the user was on, so pressing S, typing and Enter
works as before.

Starting a command from the box makes its button or section label blink twice,
and a command started from a section drop-down marks that section's label while
it runs, like a pressed button.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command search: the ribbon reveal is a preference, off by default (#7287)

Preferences › Interface › Show search results in the ribbon (`ribbon_reveal`) turns on the hover
preview, the blink after a start and the running mark on a drop-down's panel label. Off, the
ribbon behaves as on main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the ribbon reveal setting

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 19:06:44 +00:00
cb34eef6aa Settings profiles: save, switch, export and import input and interface settings (#6237) (#6254)
* claim: #6237

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: save, switch, export and import input and interface settings (#6237)

A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).

- Preferences > General > Settings profiles: choose the active profile to
  apply it, Save, Rename, Delete, Export... and Import...; a note shows when
  the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
  the control channel, palette and scripts; the engine checks the parameters,
  the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
  unknown keys and unreadable values, caps sizes, never switches, and never
  panics. Each preference is applied through prefs::set, so a value this
  computer refuses keeps its current one and is reported.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)

New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences snapshot: compare the toolbar, favourites and profile too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: keep a command's several keys (#6237)

Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 18:42:36 +00:00
CamWightandClaude Opus 5.5 a985b8ee17 Preferences: Perspective view's field of view, a slider or a typed value (#5364) (#5373)
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.

One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.

When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.

The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:23:49 +00:00
HiroKenEzandClaude Opus 5.5 c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
HiroKenEzandClaude Opus 5.5 561336aab6 Text fields: a right-click menu with Cut, Copy, Paste and Select All (#8875) (#8882)
* claim: #8875

* Text fields: a right-click menu with Cut, Copy, Paste and Select All (#8875)

Every kit text field (dialog and sketch value fields, the sketch dimension
box, canvas value boxes, names, text areas, passwords, read-only text) now
calls one shared ui_kit::text_menu::menu after drawing its editor. Rows are
disabled when nothing is selected, the text is read-only or a password, or
the clipboard holds no text. The edit marks the response changed and gives
the focus back, so owners that commit on lost focus keep the field; a right
press inside the selection keeps it; Esc closes only the menu; expression
suggestions wait while it is open. New message ui.select_all in a pending
locale file; Cut, Copy and Paste reuse ui.cut, ui.copy and ui.paste.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:14:09 +00:00
github-actions[bot] 15e3245180 Regenerate generated files and fold pending files [skip ci] 2026-10-29 18:19:08 +00:00
3cdc68aaf1 Viewport: opt-in model zoom and Traced 3D mouse orbit (#7435) (#7991)
* claim: #7435

* Viewport: the 3D mouse, the bridge and drag-zoom stop at the model, like the wheel (#7435)

The wheel and pinch hold the model point under the cursor, so the view
comes up to the surface and stops there. Every other zoom path passed no
anchor, so the 3D mouse cap, the navigation bridge and drag-zoom zoomed
straight through the surface into the body.

A device has no pointer, so the cap and the bridge now hold the model
point in the middle of the view; drag-zoom holds the point under the
pointer, like the wheel. With "Zoom to the cursor" off the old
zoom-through-the-model behaviour stays, as it does for the wheel.

The orbit half of the issue is a design decision and is untouched.

* Viewport: drag-zoom holds the point where the drag started (#7435)

The zoom anchor followed the moving pointer, so the zoom slid away from
what was pressed on as the drag went on. It now holds the press point,
the way the wheel holds the point under the cursor.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: turn around the model in the middle of the view (#7435)

The cap and the navigation bridge turned the view around the view's
centre, which after a pan or from far away sits behind the face, so the
part swung away while it turned. They now turn around the model point in
the middle of the view (the middle of the bodies in view over empty
space), and keep it still on screen. Preferences > Navigation > "Turn
around the model in the middle of the view" switches back to the old
behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: keep the turning point until the cap is back at rest (#7435)

The point the cap turns around was picked again every frame, so it slid
to whatever came into the middle as the view moved. It's now chosen when
the cap leaves rest and kept until the cap comes back, the way a mouse
orbit keeps the point it started on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: show the point the view turns around (#7435)

While the cap turns the view, a faint ball in the accent colour marks the
model point it turns around, so it's clear what the turn holds still. The
point is now picked when the cap starts turning, not when it only pans or
zooms, so a pan shows no ball.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: orbit is a choice of Traced or Classic (#7435)

The checkbox becomes a two-way choice on the 3D mouse section's form:
Traced turns around the model in the middle of the view when the turn
begins and marks it with a faint ball; Classic turns around the view's
centre as before. Traced stays the default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: the 3D mouse's Traced and Classic orbit (#7435)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Make model zoom and traced orbit opt-in (#7435)

---------

Co-authored-by: nomadsgalaxy <16734355+nomadsgalaxy@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:49:15 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
github-actions[bot] 1c0001af8e Regenerate generated files and fold pending files [skip ci] 2026-10-29 17:50:55 +00:00
RyanandClaude Opus 5.5 791abbd9b1 Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828) (#8474)
* claim: #7828

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)

While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.

A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.

Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: lining up with other points is off unless turned on

Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:11:42 +00:00
Nathan Dane 6255a10e80 Viewport status item: engine list of what is on (#8545) (#8554)
* claim: #8545

* Declare ordered viewport status items (#8545)

* Keep legacy surface analysis coexistence behind a preference (#8545)
2026-10-29 17:11:34 +00:00
RyanandClaude Opus 5.5 d05a114241 Insert Design: pick one of the other open designs, or browse for a file (#8570) (#8571)
* claim: #8570

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert Design: pick one of the other open designs, or browse for a file (#8570)

With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.

Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment

Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:11:25 +00:00