A polyline can be a chord off its edge, more than two edges are apart near a
tangent point. A pick exactly on a ball's rim took the straight edge the rim is
tangent to, and solidcore built a chamfer of that edge with a clean check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
From the rig on this branch, 949 of 974 and one timeout: threads/3368-two-faceted-prisms-cut-then-joined
is not listed, it takes 160 s alone against the 180 s limit and passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New on: fillet_exact_round_classes, curve_check_zero_speed_tangent_end,
cpoly_remove_poly_face_check_member, check_seam_crossing_unclosed, ascii_doubles_round_trip.
bspline_trim_keeps_rational_end_spans: sheet-metal/3078 passes its check with it on since
solidcore#2097, volume unchanged (31362.04580633055). geometric_g2_continuity stays held:
the fix for solidcore#2091 (#2108) has not merged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
Method::Basic and Error::NotOnSolidcore are gone. The walk over every kernel
entry point now also runs built with the C++ kernel, and fails if the default
path touches a C++ body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
copy_of named each copy in its own key domain with no naming scheme of its own; brep_copy gives a Notify
copy. A split then marks the body Caller: with_kernel_callbacks names the cut's new edge curves by the
kernel's identities, which it records, and the check reads owners by the body's naming (Test #61). Rig
level: 939/974, no status or volume change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.
The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:
- the corner beside a cylinder: the curvature fillet builds its sections only between planar
faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
concave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:
- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).
All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.
- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
its front edge alone and both edges together.
The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.
On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The C++ kernel at 26cc451 refuses the moved top at -9, as ours does. #2027's numbers need 4.7e-9 at
-7.5, not 1e-6. offset_splits_corner_vertices makes the sphere moved to its centre fail with 1001 rather
than an empty result: ignored with the reason until solidcore answers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
The rule that a flag goes on only if the fork has it is gone: differing from SMLib is no evidence
against a fix. All 32 held flags are on, fillet_refuse_crossing_rails with solidcore#2053 among them.
HELD_BACK now takes only a flag shown broken, with its case and numbers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
The fork at 26cc451 offsets four faces at a vertex to two vertices joined by a new edge, as the
flag does, by another route. On, the rig's two drain floors pass, at SMLib's volumes within 4e-15,
and nothing else moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
overflow_first takes the mitred pairs of the stopped call (solidcore#2045's mitred_edges) and
grows the rounds that go first through every mitre, as the capi's. The flag test reads
UpstreamFixes::flags (solidcore#2024), and the check's own filter of SMLib's warning gives way to
AssertReport::is_warning (solidcore#2023).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
On: query_statuses_pass_on, sweep_statuses_pass_on, ssi_proto_topology_statuses_pass_on,
analytic_inversion_answers_apart, fillet_statuses_pass_on, fillet_corner_per_vertex_fan,
fillet_rail_trim_at_near_knot, and fillet_corner_statuses and fillet_edge_curve_domain_statuses
(both soft like the fork since solidcore#2036). Held, the fork keeps upstream's code:
proto_edge_split_upper_keeps_the_old_max, point_on_start_point_squared_tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk