Commit Graph
3330 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 b71e5ae6f4 Tests: edges are read on their NURBS forms, a chamfer's chain is its caller's, the cap test's hatch
- An SMLib circle edge's `interval` is on its NURBS form (`Edge::parameters`), and an analytic
  face's `domain` on the form's (u, v). edges_are_on_smlibs_curves evaluated `curve` at the
  form's interval and took the domain for angles; it checks the side's whole turn and height
  on the form and a rim's turn by `curve_interval`. The tangent hole test's edge middles were
  read the same way (the copy seemed to join faces on opposite sides of the line).
- kernel::chamfer blends the edges it is given; a feature's pick is extended by
  kernel::tangent_chain first (doc eval). The chamfer tests do the same:
  one_chamfer_pick_follows_the_tangent_chain_at_any_part_size removes its 54.66 mm³ again.
- Since the section hatch per part (#8529) a cut is tinted with the hatch colour its body's
  name picks (Body1: steel); the GPU cap test turns the part hatch off, as the CPU one does
  (2885f101b on devgreen-engine-builds).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:20:38 -04:00
jyvikoandClaude Opus 5.5 2523d13cf0 UI tests: SMLib's cylinder has one wall and one edge per rim; split rims come from two arcs
truck made a cylinder's wall and rims in halves; SMLib makes one wall face and one closed edge
per rim (one face per profile segment, a circle being one closed curve since 09c979a4b). The
tests of what joins a rim's or a wall's pieces for picking, measuring and the agent chat
(circular_rim_hover_click..., circular_items_measure..., curved_face_hover..._cross_the_seam,
a_rim_clicked_once_is_one_item_not_its_pieces) now build their cylinder from a circle drawn as
two half arcs, extruded, so the pieces they test exist. A ring's outer circle is one wall face
(configuration_annulus_picker...: 1, was 2). The certified small crease is no longer taken for
a seam (truck's coarse fit did; the seam flags compare exact surfaces now) and, a kink of a
millionth, is smooth for the shading while still a measured crease: sharp, drawn in wireframe,
picked (smooth_edges::Join).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:20:38 -04:00
jyvikoandClaude Opus 5.5 ff0dda5377 UI tests: picks that name one thing, and a thread that names its start
- The shaft's rim was picked at its polyline's first point, the vertex where the wall's seam
  meets it, as near the seam as the rim; SMLib's cylinder lists the seam first, so the pick
  took it ("the edge is not circular", "the revolve axis does not lie in the sketch plane").
  The rim is picked at its middle.
- The gear discs touch at x = 10, on both walls; G1 is picked on its far side.
- 366b90597 refuses a thread of some length picked in the middle of a face free at both ends
  and asks for `from`; the cosmetic thread test gives it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:20:38 -04:00
jyvikoandClaude Opus 5.5 b2c5b1f5e9 Designs before format 14: a split's pieces take the names its later features use them by
Builds before format 14 named the pieces a cut splits a body into in truck's shell order, and
the later features of such a design name the piece they work on by that name. SMLib orders the
pieces otherwise, so split-body-pieces' fillet and chamfer landed on the wrong piece, its
reference "no longer exists" (design_corpus body_names_saved_before_exact_history_keep_their_pieces,
old_designs_open_and_evaluate_as_saved). For a feature saved so (`shell_piece_order`), each
name its pieces are known by goes to the piece the points the later features naming it picked
lie on; a name no later feature uses keeps SMLib's order, and so do all of them where the picks
do not tell the pieces apart. docs/compatibility.md says so.

That makes the feature's result depend on features after it, which neither its fingerprint nor
its cache key cover: a script replays the design one feature at a time, so the split was
evaluated before the fillet and chamfer existed, kept SMLib's order, and was reused once they
came (script_roundtrip corpus_designs_replay_from_their_scripts: 'Body1 (1)' 4765.663706234679
opened against 4765.663706134907 replayed). The state now keeps a digest of the picks it named
the pieces by (`ModelState::legacy_picks`), and every reuse (the last results, the cache, the
kept, rolled-back and primed results) takes a state for such a feature only while the design's
later features pick the same, so the replay names the pieces again as the file does when it
opens. A saved model's states carry no lineage and are taken as saved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 73b028b5b0 Kernel: a drafted extrusion of a profile with holes, every wall leaning on the material's side
SMLib's draft extrusion takes one loop, so a tapered extrude of a region with holes was refused
("SMLib draft extrusion of a profile with holes"), and designs that use one no longer opened
(modern-plastic's Rest: design_corpus, action_matrix a_small_hole_through_the_wall_of_a_plastic_rest).
As other CAD does, every wall now leans by the taper relative to the pull on the material's
side: the outer loop is drafted, and each hole, taken counter-clockwise, is drafted the other
way and cut from it, so a taper that narrows the outer boundary widens the holes. Exact: each
loop is SMLib's draft extrusion of it, the walls' roles are found as the foot's are. Refused,
saying why, where the taper would make a hole meet the outer wall or another hole at either
end of the extrusion.

Test: a 40 mm square with a 10 mm square hole, 30 up at 5° inward, is the one frustum less the
other to 1e-6 with ten faces; at 30° the hole would pass the outer wall and is refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 68a217d980 Reference tests: the loft case is analytic, SolidCraft's correspondence with its closed form
17-loft's expected values were FreeCAD's (OpenCASCADE's Part.makeLoft), which runs each side of
the square to its quarter of the circle at uniform angle (arc length). That correspondence has
no exact rational B-spline form, and SolidCraft keeps its surfaces exact: its ruled loft runs
each side to one rational quarter of the circle's B-spline by their own parameters, 35080.7251
mm^3, 0.13% less (the oracle failed on volume and the second moments). The owner chose this
correspondence. The case is now worked out in tools/oracle-analytic/cases_basic.py: the section
area is quadratic in t with the loops' mixed area, so volume and centroid are closed forms of it
(the mixed area and the wall area by Gauss-Legendre on the exact rational arcs); its note says
why it differs from OpenCASCADE and gives that volume, and its `compare` leaves out the surface
check against OpenCASCADE's reference.stl. All its checks pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 319e6b8b3b Kernel tests: the chamfer on a tangent wall junction is measured on meshes fine enough
chamfer_the_top_lip_at_a_tangent_wall_junction measured the removed volume as the difference of
two meshes at chord 0.0005. The display planner meshes the two bodies differently, so their
chord errors no longer cancel as truck's meshes did: 37.404, 37.672, 37.761 and 37.759 mm³ at
chords 0.002, 0.0005, 0.0001 and 0.00003, converging on the expected 37.762 (the chamfer as the
chord between the contact lines of a 2 mm ball, integrated exactly). SMLib's chamfer is that
one; the test measures at chord 0.0001.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 426a505a87 Display meshes: tests count the planner's grids; a mesh's outline is one line per straight edge
The display mesh is the tessellation planner's (8b6bfc48c: the mesher plans a schema 4
record), which grids a planar face with no side longer than a fifth of the body's extent
(docs/capabilities.md, "Display meshes"); truck's mesher gave a box face two triangles. The
tests that counted truck's mesh now count the planner's, worked out by hand from that rule:
- a 10 x 20 x 30 box (37.4 mm diagonal): edges in 2, 3 and 5 pieces, faces of 2 x 3, 2 x 5
  and 3 x 5 cells, 124 triangles; welded, the box lattice's 3 x 4 x 6 nodes less the
  1 x 2 x 4 inside it, 64 positions (obj_export_is_welded_and_keeps_names);
- a 20 x 15 x 10 box: 4 x 3, 4 x 2 and 3 x 2 cells, 104 triangles (an_opacity_class_change...);
- a 20 x 20 x 10 box saved as a mesh: its edges in 4 and 2 pieces, 40 segments per box
  (imported_mesh_edges_draw_in_each_style...);
- the cylinder's top cap is under a third of its triangles (select_other_over_a_dense_cluster...).

An imported mesh's outline was one line per crease side, so a box exported at that spacing
showed each edge in pieces: a click on a 10 mm edge measured 5 mm, or hit the node between
two pieces (measure_imported_stl_edges_and_vertices..., mesh_outline_hover_cache...). Outline
sides that run straight on through a vertex no other outline side meets are now one line, as
the CAD model's edge was.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 983b1ca8f0 Sketch projection: a projected face's curves meet at the face's vertices
A face's edges are projected exactly: lines, and arcs read off SMLib's NURBS within the
planar-edge tolerance (Body::planar_edges). An SMLib shell's offset corner is a NURBS whose
arc came out with its centre 2e-6 mm off and its ends up to 6e-7 mm from the lines they meet,
beyond the link's merge tolerance (1e-7): the inner loop of the sensor enclosure's case top
projected as sixteen loose curves, the offset of one found no chain to follow, and the Lid lip
extrude found no profile l13..a16 (the five acceptance scenarios, action_matrix
an_axis_through_a_corner_round_that_a_parameter_moves). Each edge's pieces now end on the
edge's vertices where they lie within the edge's and the reading's tolerance of them (the
vertex is the point both edges share), and an arc whose ends moved takes the centre nearest
its own that is equally far from both, so the sketch keeps both ends on its circle.
Body::planar_edges_tolerance names the reading tolerance planar_edges uses.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 271f0c5de1 STEP import: a face's loop through a pole closes its turn, so a dimple keeps its area
A round face's box (form::extent) unwrapped each periodic parameter from one boundary point to
the next. Through a pole the loop goes on from anywhere round the direction the pole collapses:
a hemisphere bounded by its rim and its seam put its second seam use on the first and its box a
quarter turn off the seam, while its pcurves ran from the seam. Past the first pole the loop is
now moved the whole periods that close it. Reference case 14's re-imported dimple had a
quarter of its area missing (9601 against 9706 mm2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 4a0c139106 UI kit: a field's scenario handle is where the field shows
A field scrolled out of a dialog's field area still published its handle at the centre of its
whole rect. The tapped hole's dialog has grown (thread hand, tap drill, thread end rows) past
1000 px, so its section's Thread depth field scrolls under the footer, and a click on that
handle pressed OK: the edit was applied (tapped_thread_depth_field_keeps_focus_and_typing_...
saw the model change at the click; focusing a field commits nothing). A field's handle is now
the middle of its visible part and is left out when none of it shows, so a scenario can only
click where a user could; the rect keeps its whole extent. The test opens a window tall enough
for the section.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 6a6cd8f56c Sketch: a sketch's bounds reach its circles' and arcs' extremes
Sketch::bounds took the points of each segment's polyline. Since 09c979a4b a whole circle is
one closed arc whose chords start at its start angle, so none lands on the circle's left or
bottom: a radius 5 circle at (-300, 0) spanned x from -304.50, and Home and Fit framed short
of it (home_and_fit_frame_the_moved_body_not_its_old_place). An arc's bounds now add the
quarter points of its circle it sweeps through, which are exact.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 e657e40867 UI kit gallery: entries for the controls added without one
checked_field, checked_row and warning_caption (the fillet Setback check), text_field_tip (tap
drills), continuity_row, continuity_row_explained and continuity_tip (the continuity choice) and
steps (opening progress) are pub(crate) ui_kit functions with no gallery entry, which
gallery_covers_every_inline_element requires of every one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 7bb5bb3d56 Locales: Arabic and Hebrew for the version and section hatch labels
help.version (help-menu-version) and prefs.section_hatch* (section-hatch-by-part) came with
ja and zh only; ar and he are complete catalogs too, so
every_complete_catalog_carries_every_english_message failed on them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 43c1b7b881 UI tests: Isocurve Analysis's engine colour is drawn from the theme's accent
be859aa0d added `colors::ISOCURVE` to the engine palette; the GPU viewport draws iso curves in
the theme's accent (`scene_palette`, the isocurve pass), so the engine value is only the
headless snapshot's, like the body and grid colours. every_engine_colour_tag_is_placed lists
it with those neutral tags.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 367beae69f Viewport: the analysis legend stays above the floating History card again
9a7958857 (placing the model returns its error) passed the legend the whole viewport rect
instead of the bottom overlay rect that clears the floating History card, and slid the
placement note's doc comment in between the legend's comment and its function. The legend is
laid out in the overlay rect again, as the frame rate readout is, and each function has its
own comment back (bottom_readouts_clear_floating_history_on_the_first_frame).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:16:22 -04:00
jyvikoandClaude Opus 5.5 b3dfcf1ff2 Tests: an engraved face's letters project as conics, their exact quadratic Béziers
a_face_engraved_with_text_projects_its_letters_exactly_and_extrudes counted the letters' pieces
as control-point splines. A TrueType outline's curves are quadratic Béziers, which are parabolic
arcs, and the cut made on SMLib keeps them exact: the projection gives 222 conics and 154 lines,
no splines. The count now takes conics with the splines. (The cut itself needs SMLib 1a1bebc;
with it the test passes.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 0e3f01ec01 Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
loft_cut_through_a_shelled_basin_in_either_order asserted one body. The loft's top section is
the basin's full 100 x 60 outline at z = 10, so the cut takes the walls' whole cross-section
there and leaves the walls above (z 10 to 30) touching the rest only along their outer rim, an
edge: two pieces, which a cut makes two bodies (eval's lumps rule). SMLib gives exactly that;
truck kept them as one. The test now expects two bodies, the upper one the walls' exact
924 mm² ring times 20 = 18480 mm³, and the total as before (41582.028).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 23bfa1cf73 Tests: the saved fitted-letters design measures its closed form, its letter as conics
a_face_sketch_saved_with_fitted_letters_reopens_and_builds_the_same compared the part with the
5916.018831 mm³ its saving build measured, to 1e-3. The part is the 30 x 20 x 10 block less the
"S" 1 deep and an r 2 circle 3 deep clear of it: 6000 - 46.290121 (the letter's exact profile
area, Sketch2's smaller region) - 12 pi = 5916.010767. SMLib measures 5916.010768 (1.2e-6 off);
the saved figure was 8e-3 off. The test now checks that closed form to SMLib's 1e-8, and counts
the letter's exact pieces as conics or splines (its quadratic Béziers come in as conics).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 f5dfb78ee8 kernel: a cut's tool face blocks a planar role only where it enters the result
map_planar_sources took every plane of a cut's tool as competing with an input face on it,
facing either way, and dropped that face's exact role. A text pocketed 1 mm down from a block's
top has its tool's top on the top's plane facing up, as the top does; the top then lost its
CertifiedExtrudeCap, and the sketch on it reported "the top cap of Extrude1 no longer exists"
(a_face_sketch_saved_with_fitted_letters_reopens_and_builds_the_same). A cut's tool faces enter
the result turned round, as the walls of the hollow, so a tool face can only take the place of a
face on its plane facing against it (a pocket's floor, a face the tool sat on from outside). Only
that orientation competes now; the existing blocking cases (a tool's bottom on a pocket floor, a
tool face against a wall) are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 5489599c0d Tests: a face with no attachment is a rib's wall, whose feature reports no roles
unsupported_face_has_explicit_fixed_alternative_and_no_live_projection needs a planar face with
neither a construction certificate nor an exact history name, so a sketch on it must be fixed.
Its face, a split top face offset up, now keeps its history through SMLib's offset and gets a
name. A rib reports no roles for the faces it builds (Traced::unnamed, eval_more), so a rib's
wall has neither: the test now picks the wall at y = 12 of a rib in a bracket's corner.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 5cbfbe35db Tests: interference lists the pair of a solid and an imported mesh as not checked
interference_lists_a_pair_it_could_not_check needed a pair interference cannot check. Its
pair, an arc revolved up to a post's wall, was one truck could not intersect ("not verified");
SMLib intersects it exactly, and that reason is gone from the code. The pairs left unchecked
are a kernel failure, the time budget, and a mesh body: an imported mesh has no exact surfaces
to intersect (owner's call). The ring is now brought in as an STL beside the post, and the pair
is listed with "mesh body: not checked" instead of passing as clear.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 4a94a025c8 Tests: freezing rebuilt arc borders gets its rebuild from a notch across the arc
freezing_rebuilt_arc_borders_keeps_authored_dimension_entity_indices needs the projected
border of the sketch's face to come back with a different number of curves. Truck split the
sector's arc into pieces that changed with its sweep (270 to 300 degrees); SMLib keeps one arc
whatever the sweep, so the count stayed 3. A notch, clear of the sector until a parameter moves
it across the arc at 90 degrees, now splits the arc border into two arcs and the notch's sides.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 2b0357a22d kernel: two planar supports are one when SMLib would call them coincident
same_support took two planes as one support only within 4096 ulps (normals 9e-13 apart,
origins about 1e-12). Faces SMLib rebuilds through a boolean lie within its own resolution of
the plane they were made on, not within ulps: a cap at z = 10 notched by a cut came back with
its origin 2.1e-11 off and its frame turned 1.36e-12 rad, so its CertifiedExtrudeCap was
dropped and the sketch on it reported "the top cap of Extrude1 no longer exists".

Supports are now compared at SMLib's own coincidence rule, SmPlane::CoincidenceCheck: normals
within the angle the tolerance makes across the plane (`tolerance / size`) and each origin within
the tolerance of the other plane, the tolerance being the record's `tolerance` (SMLib's per-brep
XSectTol3d, the one its booleans test surfaces for coincidence with). The body's size stands
for the plane's extent (at least as large, so no looser); rounding stays the floor. The normal
window the candidates are searched in follows the same angle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 9be29894e9 kernel: a cut by a tool apart from the body is the body itself
The truck booleans answered a tool clear of the body without intersecting (the operand kept,
its record shared). The SMLib boolean always rebuilt the body, so a cut that could not reach a
body still handed back a new record: a hole far from a second body reported that body changed
(#2904's test), and a body clear of a pocket's cutter was no longer the same solid. A cut or
intersection whose operands are apart (their exact boxes, grown by twice the tolerance as
union_apart takes them, do not meet) now gives the body itself with its faces and edges kept,
or nothing, with no SMLib call.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 1fb5e94da1 Tests: Intersect's box outline is compared as lines, and a tilted cylinder's whole rim projects to its ellipse
- A section's chains are walked from either end, whichever segment the mesh's triangle order
  puts first at a node (doc::project::fit_segments), so a line's direction says nothing about
  the cut. SMLib's box tessellates in another order and the outline came out clockwise: the
  same four lines. The two box-outline tests now compare each line with its lower end first.
- The base rim of SMLib's cylinder is one closed circle edge (truck's was two seam halves), so
  projecting it gives one exact ellipse. Checked against the closed form: a radius-5 circle in
  a plane tilted 45° projects to semi-axes 5 and 5·cos 45° = 3.5355339 (the reported minor
  radius), and every sampled point lies on x²/(5/√2)² + y²/5² = 1 within 1e-9, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 a312721948 Sketch: an included 3D edge keeps its exact curve from the moment it is linked
Linking a reference (sketch.include_3d, project, intersect) stored the link's wires as points
only: add_link_unless_present called add_link_with_wires and dropped the resolution's exact
curves, which only the next refresh of the sketch filled in (doc::project, since 7952516eb).
So an included box edge had no exact line until any edit refreshed it, and the wire changed
under an unrelated sketch edit. The exact curves are now set with the wires when the link is
made, as a refresh sets them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 7b984936a9 kernel: an emboss's arcs run on their wall's own frame, and its seam is read from the circle's angles
Two readings of the SMLib record went wrong in emboss_cylinder:

- The footprint arcs were labelled on the sketch's radial frame. The assembly gives each new
  circle edge the NURBS form on its label's quarter grid, and the wall face keeps its own form on
  its frame's grid (a cylinder's seam lies at an odd angle, build::SEAM_ANGLE). The two grids
  differ by a non-quarter turn, so the arc's form is not a straight line in the face's (u, v)
  and no exact pcurve exists: "no exact pcurve of a NURBS on a spline surface". The arcs at the
  wall's radius are now labelled on the wall face's frame (form::on_frame), so their forms lie on
  the face's grid and the pcurve is exact.
- wall_angles took the edge's interval as the circle's angles. On an SMLib record the interval
  is on the edge's NURBS form (2πr long for a whole turn), so a wall spanned some 63 rad: a
  profile across the seam was accepted, and a wall of radius 0.1 was refused as off its seam.
  It now reads Edge::curve_interval.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:15:12 -04:00
jyvikoandClaude Opus 5.5 534dffa96d Tessellation: the band beside a slit and the sag refinement keep the face on both sides of it
A face that meets itself along a line (the Pinch case's boss side, turned 30 degrees: the hole's
wall touches it along a vertical line from the hole's bottom to the top rim) has its loop run up
that line and back down. Its motorcycle trace runs from the slit's tip to the bottom and the
iso-line grid meshes it, but the band between the grid cells and the boundary was filled by a
parity flood that flipped at every constraint, the slit's too: the band on one side of the slit
was taken for outside, the face did not follow its boundary, and the lenient fill took over.
The band now crosses a side the loops run along both ways without counting it, as the
triangulation itself already did. Delaunay's sag refinement had the same flood and left the far
side of a slit unrefined (the lenient fill's 0.52 mm^3 shortfall); it takes the slits too.

The Pinch case now meshes strictly: the boss side is 628.3177 mm^2 against 200 pi = 628.3185, and
hole_tangent_inside_a_stepped_boss_cuts_exactly passes. New tess test: a square with a slit
meshed by the cut grid follows the slit both ways and covers the square's area exactly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 43ad9d0b0c Tessellation: a slit (a side the loops run along both ways) bounds the face on neither side
Where a face meets itself along a line (a hole's wall tangent inside the wall round it: the
boss side touched by the hole along a vertical line, run up and back down), its loop runs along
that line both ways. The triangulation's region test flipped inside and outside at every
constraint side, so crossing the slit put the face's far side outside it; the follow check
wanted every boundary side under exactly one triangle, where a slit has one each side. Sides the
loops run along an even number of times no longer flip the region, and the follow check wants a
triangle per run. (The Pinch case's boss side still falls back to the lenient fill, now within
0.52 mm^3 of the exact 8717.92 where it was 340 short; the strict fill's remaining mismatch on
the seam-cut face is open.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 fcd5f79975 Tessellation: a node lying on another chord is untangled like a crossing
A ring whose inner circle touches the outer one (a boss standing on a disc, tangent inside its
rim) is one loop through the touching vertex, both circles leaving it along one tangent. There
the inner circle's first node falls on the outer circle's last chord whenever the outer chord is
twice the inner (exactly but for the next order: the inner circle at s rises s^2 / 2r, the outer
chord at s/2 of its length rises L^2 / 8R, equal for L = 2l, R = 2r), as the samplings fell
here. No crossing by the untangle test, but no triangulation can keep both as constraints: the
strict fill refused the face, and the lenient one, dropping constraints, filled the inner disc
(314 of the ring's 942 mm^2, the Pinch test's 1047 mm^3 shortfall). A node of one chord lying on
another (inside it, not at its ends, and not two chords along one line, as a seam's two uses a
period apart are) now has that chord halved. Regression test: the ring meshes strictly, to
300 pi.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 a6054603db Tests: fillet removals from exact volumes; SMLib's rounds match Pappus and the quadrature
fillet_an_open_curved_edge, fillet_sharp_arc_and_arc_loop and
fillet_mixed_arc_and_line_removed_volume_converges took the volume a round removes as the
difference of two mesh volumes, which magnifies their sag (each mesh lies within its chord of its
faces, so the difference can be off by both areas times the chord: for the r 0.25 round at a
1e-4 chord 1.8e-3 of what it removes). Measured exactly (SMLib, 1e-8) the rounds are right:
the open curved edge's removal 25.7629198 against Pappus' 25.7629199, the sharp arc loop's against
its lens quadrature, the mixed joint's 2.7155830 and 0.6842666 against the reference 2.7155785 and
0.6842658 (1.7e-6 and 1.2e-6: the blend's own fit, whose section error the joint test reports).
The removals are now exact, the mixed one held to 1e-5 of the reference; the meshes' removal is
held to its chord bound of the exact one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 d5bd1ebfd1 Bridge: a support surface's shape read about a station in its middle has the right signs
Support::station reads the curve leaving a boundary from five samples: one-sided where the
support ends at the station, central where the surface goes on past it. The central five-point
formulas had the first and second derivatives' signs reversed ((-f0 + 8 f1 - 8 f3 + f4) and
(f0 - 16 f1 + 30 f2 - 16 f3 + f4) over 12h, 12h^2, the negatives of the standard ones), so the
curvature read there pointed away from where the surface bends. Truck's half cylinders ended at
every picked line and read one-sided; SMLib's cylinder is one periodic face, the seam is inside it,
and the central branch read the wall bending outward (+radial / R): the G2 and G3 matches to it
built sheets bending the wrong way, and the continuity check, reading the same frames, called
them G2. The central formulas are now the standard ones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 bb0b146a94 Tests: #1510's parts are weighed by their exact volumes, not 1e-3 mm meshes
a_split_in_the_plane_of_a_face_keeps_all_of_the_body held the two parts' volumes to the body's
within a millionth, each read from a mesh at a 1e-3 mm chord. Nothing was lost: the parts came
out at exactly the closed forms (780.3707 and 1035.2797 for the 5 mm groove, 1815.6504 together);
the whole body's own mesh sagged 0.0034 mm³ short of that round the hole, twice the millionth.
They are now SMLib's exact volumes (1e-8).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 f9347aca70 Tests: the mirrored union's volume held to the two integrals' 1e-8 accuracy
measure now integrates to SMLib's finest relative accuracy, 1e-8 (da57f37e5, cherry-picked from
the engine-commands branch), not 1e-4: the mirrored bracket's union and twice its half, each an
integral good to 1e-8, agree to 2e-8. (The test stops earlier on this base, at the mirrored
operand SMLib's check refuses: the mirror-regressions agent's cause.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 fad9c44dac kernel: measure integrates to SMLib's finest accuracy, 1e-8, not 1e-4
measure asked SMLib for a relative accuracy of 1e-4, after SmApiBrepComputeMassProperties'
documented clamp to [1e-4, 1e-1]. smlib_brep_mass_properties does not go through that call: it
calls the kernel's integration directly because the clamp "leaves curved faces off by 1e-5 to
1e-3", and takes [1e-8, 1e-1] (solidcraft_smlib::MEASURE_ACCURACY). Asking 1e-4 threw that
away: a swept cylinder's centre came out 5e-7 off its exact place, and a 0.0177 mm³ crescent
(a pin 0.59 µm off its hole) 0.27% off the lens of two circles. Measured at 1e-8, the sweep
centres are exact to 1e-7 and the crescents match the closed form to 1e-6; the engine-commands
batch runs in the same 20 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 a3e42e5486 Tests: the cap whose loops prism_measure compares is found by its plane, not as the last face
cap_support_origin_is_not_a_trimmed_face_height read the drilled block's last face as a cap. The
record's face order is SMLib's: its last face can be the hole's wall, which has no cap loop, and
the test unwrapped None. The cap is now the first face on a plane square to z.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 80b7ce28e0 Tests: volume checks held to what their measures can tell, not tighter
a_lip_swept_on_a_round_rim_joins_it compared the union's mesh volume with the two operands' at a
1e-5 chord to 1e-3 mm³. Each mesh lies within its chord of its own faces, and the union is
tessellated by its own faces (the lip's foot merged into the top): two meshes of one solid differ
by up to their area times twice the chord, 0.02 here; they differed by 1.6e-3. The bound is now
that. overlapping_holes_and_mirror_joins held the mirrored union to 2v within 1e-9, below the
relative accuracy SMLib integrates volumes at (1e-4, measure::ACCURACY): the two integrals
differed by 2.3e-8. (That test now stops earlier, at the mirrored operand SMLib's check refuses,
the mirror-regressions agent's cause.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 6a780de5fd Tests: the helical groove's removed volume from the cut's exact volume, not a 0.01 mm mesh's
faceted_cut_of_a_helical_groove took the volume removed as the shaft's exact volume less the cut
body's mesh volume at a 0.01 mm chord. That mesh sags inside the shaft's round wall: the uncut
shaft's own mesh at 0.01 is 0.18 mm³ short of pi r^2 h, five times the 3 % the groove is held
to, so the groove read 1.326 where the screw integral gives 1.2214 (the section's 2 pi int r dA
over 4 turns plus the ramp at z = 0). The cut is a B-rep: its exact volume (measure) gives the
removed volume within the 3 %.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 39e1dcea03 Faceted boolean: a body's own mesh is closed once its faces' shared corners are one vertex
faceted_boolean took the tool mesh's triangles by vertex index and refused any edge not shared
by exactly two triangles. A body's mesh (Body::mesh) gives each face its own vertices, the faces
along an edge the very same points, so a box's mesh came in as six open patches: "the mesh is
not closed". Corners at the very same point are now one vertex first (triangles keep their order,
so the history's triangle faces are unchanged).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 e0d5ee4963 Tests: thicken and raised-band histories checked as SMLib reports them, Meet edges and seams included
check_kept panicked on any edge origin that was not an operand's edge, but a new edge where two
faces meet has a Meet origin by the history's contract (EdgeOrigin::Meet), and SMLib's history
gives them: the raised band's and the thickened sheet's new edges. It now checks the edges an
operand still owns and passes over the meetings. The thickened sheet is the whole cylinder side
(SMLib's one face, truck's half): a wall stands along each of its free edges, the two rims, and
none along its seam, which the face meets itself along (2 + 2 faces, not 2 + its 3 edges).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 2b22b2cbe3 Tessellation: a face's sides are flipped where the triangles lie closer along the surface the other way
A layout can leave triangles standing on their long side across the surface:
their corners on it, their plane across it. They count several times the area
under them (the front triangle's loft tubes 0.7% and 1.1% over the finer mesh)
and no split repairs them, since each half stands the same way.

After the sag refinement a post-pass flips a side inside the face when the
two triangles on it turn less from the surface normal the other way (by more
than a degree), keep their orientation in (u, v) and against the surface
normal (nothing folds), have area in 3D, and the new side and triangle middles
stay within the tolerance of the surface or no farther than before. Boundary
sides are never flipped.

Test: tess triangles_standing_across_a_curved_sheet_are_flipped_along_it; the
boolean_regression joined_loft_frames_reference_mesh_covers_each_face_once
case now passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 666ccd85d5 Tessellation: sag refinement splits a flat triangle's long side and never across an obtuse one's short side
Refinement split the side of a triangle that sagged most. Where a long
inner side lies on the surface at its middle (a section with an inflection,
a loft tube of the bike frame's front triangle) and the triangle's short
sides sag, only the short sides were split: each split left a child with the
long side and its vertex nearer to it, and the triangle beside a split side
lost its shape the same way. The triangles flattened onto the long side
without end, refinement ran to its point budget, and the mesh of the face
counted 3.4 times its area (1.45 times on a second tube).

A triangle whose widest angle is past 150 degrees now splits its longest
side, and a split never goes across an obtuse triangle's shorter side: that
triangle's longest side is split first, along the path (Rivara's
longest-edge propagation, its lengths growing, so it ends). Only sides inside
the face are split, as before.

Test: tess sag_refinement_across_an_inflection_ends_without_slivers, a sheet
with an S section meshed with a triangle flat on the chord across its
middle; it ran to its budget of 20000 points before and adds 28 now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 47b1d716d0 Tessellation: a whole sphere's loop starts off its poles when its seam has two segments
A whole sphere as one face has its seam as its only edge, used both ways. In a body many times
its size the seam gets two segments at the body's chord (pole, equator, pole), so no node off
the poles follows a node off them, and the loop kept its first node, a pole: its closing step
crossed the other pole, which the drift unwrapped to a whole turn ("boundary winds around the
surface"). The sphere was left out of the mesh (cut_beside_a_sealed_void_keeps_the_body: a void
r 2 in a 75 mm part, "1 face(s) don't mesh"). The loop now starts, failing a node with an
off-pole predecessor, at a node whose predecessor is a pole on the same edge, so the step into
it is that edge's own and the step into the pole is unwrapped in the loop like any other.

Regression test a_small_sphere_void_in_a_large_block_meshes (tess tests): watertight, no face
left out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 9e97bc4703 Tests: a split face without its record exports as the body has it, and the next operation joins it
export_keeps_faces_split_on_purpose took a box whose top Split Face cut in two, dropped the
split record by hand (with_split_lines(None)) and expected the STEP file to have 6 faces: truck's
export joined pieces on one surface, "as it does for pieces a boolean left". No operation makes
such a body: the split record is only set (doc eval, Split Face), never dropped, and removing a
Split Face rebuilds the part without the split. SMLib's booleans join pieces on one surface at
their end (two touching boxes unite into 6 faces), and the local modifiers heal through
boolean_record::healed, so no operation leaves incidental pieces either. The file now has what the
body has (7 faces, the export merges nothing), and the heal every later operation applies
joins the unrecorded pieces: 6 faces in the body and in its file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 4626f83e5d Tests: a sketch curve splits a cylinder's one side face in two, not a half side
SMLib's cylinder side is one face round the whole turn (truck's two halves): a line at z = 5
splits it into a quarter and three quarters of 2 pi 10 x 20, two side faces, not three. (The
test still fails further on, at the face-split tool's "invalid argument", engine-builds'
cause fixed on their branch in 50356dbf2.)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 7ec4b7212d Tests: a face's flat area may differ from its surface's by the sails its boundary chords bridge
a_modelled_thread_in_a_bore_meshes_inside_its_block held each face's triangle area to within 5%
of its surface's area. At the 0.1 mm tolerance, face 18 failed that: 1.777 mm^2 of triangles
over 1.522 mm^2 of surface. Face 18 is the groove's crest band where it runs out through the
block's end, a wedge at most 0.44 mm wide. Its boundary sides are the helix edge's chords, 1.37
mm long and sagging 0.062 mm (inside the tolerance). A flat triangle on such a chord bridges the
sail between the chord and the edge instead of following it, and the band is no wider than the
sag. The excess, 0.255 mm^2, is less than the sails along the face's boundary (sum of 2/3 L sag
= 0.62 mm^2). Every triangle is within the tolerance: the chord check passes. No triangulation
of the inside changes this; the boundary nodes are the shared edge nodes.

The check now allows 5% plus the boundary's sails at the tolerance, 2/3 L tol per boundary side.
A zigzag that multiplies a face's area, which this test exists to catch, is still far outside
that. On the run-out root band the bound allows about 40% at 0.1 mm and 5% plus 4 mm^2 at
0.01 mm, against the former 6x.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 71ea626d0a Tests: a quarter disc tapered outward builds, and its volume is the exact integral of its sections
tapered_extrude_of_lines_and_arcs expected the quarter disc (its arc meeting both lines at a
corner) to be refused, "arc meets another edge at a corner". That was truck's limit. SMLib's
curvature-keeping taper builds it as mainstream CAD does: each wall continues as itself until it
meets its neighbour. The test now checks what was built. The section at d = z tan 8 deg is the
disc of radius r + d over x >= -d, y >= -d. Its area is in closed form, and the volume is its
integral by Gauss-Legendre: 458.5870559 against SMLib's 458.5870567 (2e-9). The body has 5 faces.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 eb40e161de Tests: the thread whose display is checked is made as the thread feature makes one, with exact helices
thread_display_tests sewed its M10 and M12 threads from cubic Bezier pieces approximating
helices, which lie about 1e-5 mm off the core and crest cylinders. No exact (same-parameter)
pcurve exists on the cylinder for such an edge, and SolidCraft's pcurves are exact B-splines
only. Sewing refused the core face ("no exact pcurve of a B-spline on a spline surface"). Truck
had fitted one. The thread feature makes its helices exactly, with SMLib's screw sweep, so the
test now does the same: the ISO ridge's section is screw-swept and joined to the core cylinder.
The section reaches a tenth of a pitch into the core along its flanks. ridge_volume is still the
thread's exact volume, and both display tests run unchanged, from the body as made and after a
STEP round trip. Imported edges that lie off their surfaces stay refused; they are Repair Part's
job.

The quality check's sag is now measured at the surface point nearest each triangle's centre.
Before, it was read at the mean of the corners' parameters. A closed surface's parameters are
kept within one period, so a triangle across the core's seam had corners a period apart, and
their mean read 6.27 mm off a triangle that lies on the surface.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 6a06226ad9 UI tests: the split face's isocurve pieces are each wider than the lines' spacing
isocurves_of_a_split_face_run_on_across_the_split split the box's front face at x = -2
and 22, leaving an 8 mm piece. Since a body's size counts its edges (the boss's rims
reach y = -32 and z = 50), the lines' spacing grew to 10 (x = -20, -10 on the left
piece), and the 8 mm piece had no line up it to compare. The boss now leaves pieces
x < -6 and x > 18, room for two lines and one: the test still checks that both pieces'
lines lie on one ladder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00