Commit Graph
2406 Commits
Author SHA1 Message Date
MishungandClaude Opus 5.5 ae2d2145b2 CONTRIBUTING: the desktop app runs on macOS too (#4535)
The README and docs/downloads.md ship a universal macOS disk image, but the
contributing guide listed only Windows and Linux.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:24:50 +00:00
Basil a800a40099 Fix Snap smoke startup race before viewport readiness (#5346) 2026-10-26 10:24:40 +00:00
Badger BandClaude Opus 5.5 dc3061a039 Docs: on Windows, give claude mcp add the CLI's full path (#5895) (#5896)
* Docs: on Windows, give claude mcp add the CLI's full path (#5895)

The Windows installer puts solidcraft-cli.exe in C:\Program Files\SolidCraft but not on PATH,
so the README's and docs/mcp.md's `claude mcp add solidcraft -- solidcraft-cli mcp` registers a
server that can't start there. Say so next to the command and give the full-path form.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: word the Windows full-path note so it holds once the installer sets PATH (#5895)

#5898 makes the MSI add its folder to PATH. Say "if a terminal doesn't find solidcraft-cli
(older Windows installers don't put it on PATH)" instead of stating that the installer never
does, so the note stays true whichever change lands first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: the Windows CLI path is the default, not the only place (#5895)

The MSI installs to ProgramFiles6432Folder and lets people choose the folder
(WixUI_InstallDir), so C:\Program Files\SolidCraft\ is only the x64 installer's default; the
x86 MSI on 64-bit Windows lands in C:\Program Files (x86)\SolidCraft\. Say "by default" in
the README and docs/mcp.md (review on #5896).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:24:34 +00:00
ThoschandClaude Opus 5.5 102314dbb2 Docs: blurry interface on Linux with display scaling, and how to fix it (#5979) (#6195)
SolidCraft runs through XWayland whenever an X display is available. A
compositor that doesn't let X11 apps scale themselves draws the window at
100 % and stretches it. docs/nix.md said so only for fractional scaling,
but GNOME 47 (RHEL and Rocky Linux 10) does it at any scale: the report
shows 1.05 physical pixels per point at 200 %.

The troubleshooting page gets a section with the cause, the Window system
preference, SOLIDCRAFT_WAYLAND=1 for 0.21.0 and earlier, and the file drop
trade-off; docs/nix.md links to it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:24:30 +00:00
bherbruckandClaude Opus 5.5 4d61100534 Release 0.23.1: version bump, design format 38 (#7035)
The component colour tests no longer assume a design always carries a list of
pending format changes; once the release folds them, there is none.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 07:07:18 -04:00
Homero Thompson 4ced1d7bcf Viewport: the grid fades with the distance instead of cutting off (#4214) (#4629)
* claim: #4214

* Viewport: the grid fades with the distance instead of cutting off (#4214)

The ground grid stopped at a fixed distance from the view, so its edge showed
as a cut across the picture. It now fades out with the distance from the
middle of the view, and it is gone before either of the two lines that used to
cut it: its own edge, and the picture's far plane.

Each grid line is drawn in pieces, and each piece is as faint as the fade
makes it at the distance where it lies. The 'under' batch is drawn by the
overlay pipeline with alpha blending, so the colour's alpha reaches the
frame.

* The headless grid fades with the distance too (#4214)

The headless path (solidcraft-cli snapshot, the home-page thumbnail, the MCP
screenshot) drew the grid from the engine's palette, where a line had no
alpha: the grid still ended in a cut, and at a low camera angle the cut was
in the picture.

A SceneLine now carries an alpha, the CPU rasterizer blends with it and the
GPU capture passes it on, so the engine's grid can fade. The fade itself
moves to the engine, next to the grid's other geometry, and both paths use
it: the headless grid now reaches as far on the ground as the view is wide
(the ground stretches as it is seen at a slant) and dissolves into the
distance instead of ending in a line.

* Fix the headless/viewport grid fade divergence (#4214)

The engine stretched the grid's size with the slant of the plane it is seen at, the viewport stretched it only on the ground, so on a sketch's plane the picture's grid reached further than the window's (153.42 mm against 120.00 mm). Both now share one grid_ext, which the picture and the window draw the same grid from.

* The grid fades out before the picture's far plane cuts the ground (#4214)

The window's grid faded against a far plane of its own: the scene's radius
clipped by the projection's camera (260 mm away at 400 mm of distance), while
the picture itself cuts the ground at the far plane of its own projection
(223.7 mm at the same distance, because the projection frames the scene's
bounds and not its radius). The grid was still a third of its strength where
the picture cut the ground, so the cut showed as a straight line across the
view.

The fade now ends at the far plane the picture's projection uses, and the
grid is gone before that plane cuts the ground.

The test that watched the fade now measures the ink of each row of the
picture, and checks that the grid is already gone in the ten rows above the
row where the far plane cuts the ground: the point it compared before lay
beyond that plane, where both renders draw nothing at all, so the comparison
was always true.
v0.23.0-nightly.20261026.81.1
2026-10-26 07:59:56 +00:00
DuBearteandClaude Opus 5.5 a82f839255 Docs: don't offer winget install before the package is in winget-pkgs (#5734) (#5827)
* claim: #5734

* Docs: don't offer winget install before the package is in winget-pkgs (#5734)

The README and docs/downloads.md said Windows users could run
`winget install bherbruck.SolidCraft`, but winget-pkgs has no manifests for
bherbruck.SolidCraft (manifests/b/bherbruck doesn't exist), so winget finds
no package. winget.yml only updates a package that is already listed, and
does nothing until then. Drop the command from both pages, and say in
docs/releasing.md that the first version has to be submitted once by hand
and the command added back when it's listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Releasing: a first WinGet submission is already open; take it up (#5734)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 07:39:29 +00:00
Brandon Wees 08484af293 Finish the sketch when Extrude, Revolve or another feature starts (#2802) (#2815)
* fix(ui): finish the open sketch when a modeling feature starts

* fix(ui): wait for the marker roll before starting a feature from a sketch

* fix(ui): start the feature once the marker is back

* test(ui): keep the sketch open in the palette clearance test
2026-10-26 06:56:07 +00:00
raykholo d29e70bad9 docs: Save As blocked by Windows Controlled folder access (#4490)
Saving into Documents fails with the Windows dialog's "File not found" when
Controlled folder access blocks the app, and the message gives no hint.
Refs #4479.
2026-10-26 06:49:53 +00:00
1d482aff74 Docs: AppImageLauncher 2.x can't start the AppImage; update to 3.0 (#4640) (#4674)
* claim: #4640

* Docs: AppImageLauncher 2.x can't start the AppImage; update to 3.0 (#4640)

AppImageLauncher 2.x intercepts every AppImage through binfmt_misc and
can't start static-runtime AppImages such as SolidCraft's: it fails with
"execv error: No such file or directory" after a FUSE message. 3.0 starts
it. One paragraph in the Linux AppImage section says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: AppImageLauncher 3.0 is so far only published as betas (#4640)

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
2026-10-26 06:49:52 +00:00
raykholo 2445c0f13d Flatpak repository: always publish its HTTPS URL (#4864) (#4875)
GitHub Pages reports the base URL as http:// for the custom domain, so the
.flatpakrepo file, the remote-add line on the repository page and the mirror
of the previous repository all used plain HTTP. Force https:// once where the
base URL is read.
2026-10-26 06:49:50 +00:00
Homero Thompson 3d0e2a8b3c docs: the gate reads the working tree, and how to show a picture without committing it (#4902)
* docs: two notes for agents and contributors (the gate's working tree, and linking a picture)

* docs: how to show a picture without attaching it

The reviewer asked for the pictures to be attached to the PR (or in a gist),
not hosted on a branch of a fork, so the note no longer teaches the branch
trick.

* docs: say how to attach a picture, and what a gist is for

The review of this pull request pointed at two things in the note on
evidence:

- Attaching works in the browser for anyone who can comment: drag the
  file into the comment. The limit is the command-line agent, whose
  upload needs write access to this repository. Say that, instead of
  claiming that a contributor without write access cannot attach a file.
- A gist suits a log or another text file; it does not render a picture
  inline. Say what it is for, so nobody hits that dead end.

The note in AGENTS.md about the gate reading the working tree is
unchanged.
2026-10-26 06:49:48 +00:00
raykholo 2a01cca00e User guide: local models with the Assistant (#4851) (#4964)
* claim: #4851

* User guide: local models with the Assistant (#4851)

A page on choosing and setting up a local model (Ollama, LM Studio, or any
OpenAI-compatible server) for the Assistant: tool support, VRAM, permissions,
the measured results from the standard test in #4851, and troubleshooting
for the common failures.

* Guide: local models table with the full set of measured results
2026-10-26 06:49:46 +00:00
raykholo d7cc5621fa Troubleshooting: what to do when a design won't open (#5114)
Point to the `<file>.bak` copy every save keeps, the design.solidcraft in crash
reports, the recovery folder for unsaved designs, and how to attach the file
to an issue.
2026-10-26 06:49:44 +00:00
raykholo be6c7fc17c Bug template: ask to reproduce on a current build first (#5150) (#5154)
* claim: #5150

* Bug template: ask to reproduce on a current build first (#5150)
2026-10-26 06:49:42 +00:00
raykholo f006eefd6e docs: point AGENTS.md's starting steps at public files (#6049)
"Start every session here" sent readers to plan/STATUS.md,
plan/execution-plan.md, plan/architecture.md and
plan/adr/0001-geometry-kernel.md. plan/ is gitignored, so nobody who
clones the repository has those files.

Point the steps at what ships instead: ROADMAP.md, CONTRIBUTING.md's
"Where help is wanted most", "How the code is laid out" and "Kernel
work is paused" sections, docs/architecture.md, the help wanted, good
first issue and needs-triage labels, and the licence rules with
deny.toml and cargo xtask licences --check.

Signed-off-by: Ray <raykholo@users.noreply.github.com>
2026-10-26 06:49:38 +00:00
bherbruckandClaude Sonnet 5.5 15269f85a1 docs: how to bump the Homebrew tap on a release (#6276)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-26 06:49:37 +00:00
bherbruckandClaude Opus 5.5 e53390ea1b Roadmap: a short user-facing ROADMAP.md, with the developer detail moved to docs/roadmap-detail.md (#6797)
* Roadmap: a short user-facing ROADMAP.md, developer detail moves to docs/roadmap-detail.md

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Roadmap: feature milestones with progress counts, daily releases through the in-app updater

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Roadmap: count issues as pieces, show work built on the drawings and render branches

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 06:49:35 +00:00
raykholo c8314687fc Construction points and axes: Browser rows, and pickable in the view and dialogs (#4312) (#4320) 2026-10-26 04:50:46 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
bherbruckandClaude Opus 5.5 348bbc1dfa fix(joints): edge and corner picks follow the part when it changes (#6942)
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.

The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.

Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 04:05:26 +00:00
262f5c61c0 Move, Align and previews on placed components (#4455)
* Move and Align on placed components: picks and vectors where they are shown

A body in a component placed away from its own frame (an imported part
set upright) moved the wrong way: Move's vector, axis and pivot were
taken in the root's frame, so moving the upright plate up moved it along
its own frame's z. They now turn with the frame of the bodies moved.

Align mapped each pick into the frame of the body under it, so aligning
two separately placed parts mixed two frames (the plate landed at right
angles), and its snap points were never mapped at all. Align now finds
its picks, face normals and snaps where the view shows them and takes
both ends into the moved bodies' frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preview: a feature's tool is drawn where its component is shown

Extrude, revolve and the primitives preview their tool on its own. That
preview was built in the model's frame, so on a component placed away
from it (an imported part set upright, edited with its component
active) the tool showed at right angles to the picked face, though the
feature itself came out right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Follow main's lazy body frames and first-part grounding in the placed-component work

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 03:28:14 +00:00
ece2a8693a Cache assembly browser data between unchanged frames (#662) (#1610)
* Cache assembly browser data between unchanged frames

Extend #1762's cached component membership, placements and viewport hover
feedback with cached occurrence labels, folder entries, row keys and
tooltips. Skip offscreen row work and reuse browser hover buffers while
reading selection, visibility and locking live. Cache #2681's standard-part
configuration labels with the document snapshot instead of formatting
them on every redraw. Preserve #3009's live selection and hover marks
with highlight keys owned once by cached entries, and retain #2431's
feature rows in the reusable drawing order.

Related to:
- tangency-labs/solidcraft#662
- tangency-labs/solidcraft#1762
- tangency-labs/solidcraft#2681
- tangency-labs/solidcraft#3009
- tangency-labs/solidcraft#2431

Co-authored-by: Codex <noreply@openai.com>

* Browser cache: lock state moved to the session visibility

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser cache: reveal a placement's body by its row, and drop a needless borrow

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 02:51:32 +00:00
0f77199449 Pipe: an Operation row, so a pipe can join, cut or intersect (#2820) (#5169)
* Pipe: an Operation row, so a pipe can join, cut or intersect (#2820)

The engine's solid.pipe takes an operation, but the Pipe window had no way to
choose one, so a pipe always made a new body. The window now has the same
Operation row as Loft and the primitives, and editing a pipe keeps its
operation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fit the Pipe operation row to main: sketch-qualified pick, length_input pattern

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 02:32:31 +00:00
github-actions[bot] e02ef3246f Regenerate generated files and fold pending files [skip ci] 2026-10-26 03:14:51 +00:00
ffbeb42b5c Assistant: say so when a turn ends without using SolidCraft's tools (#4846) (#5188)
* claim: #4846

* Assistant: say so when a turn ends without using SolidCraft's tools

When tools were offered and a completed turn made no tool call and no
change, the chat panel shows a short notice pointing to tool-capable
models: always for an empty reply, and for a text-only reply to an
explicit edit request. Plain answers to questions stay quiet. The
control channel exposes it as turnWarning.

* Fix the Anthropic loop test for the tools event; add ja and zh for the no-tool-call notice

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 02:19:57 +00:00
816bcf10de Every new command comes with input and output schemas (#2829) (#4035)
* Every new command comes with input and output schemas

A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.

`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.

A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the commands added on main since: view.layout, view.history_layout, view.normal_to

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies

- `participants` changes the result for some features and nothing for others; where it and
  another key override each other, or where it has no effect, say so in that key's
  description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
  bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
  that isn't an object).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 43 commands added on main since: frame, component, render and others

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange

browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Schema rule warns instead of failing for now

A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 01:43:02 +00:00
Nathan Dane 28689e784e fix(ui): retain macOS application bar controls alongside native menus (#6190) 2026-10-25 21:19:57 -04:00
github-actions[bot] d396be78a2 Regenerate generated files and fold pending files [skip ci] 2026-10-25 23:35:40 +00:00
github-actions[bot] cbac207852 Regenerate generated files and fold pending files [skip ci] 2026-10-25 23:29:18 +00:00
taylorhayis ff2ca2d462 Keep focus when correcting an invalid parameter name (#3965) (#4000)
* claim: #3965

* Parameters: a click can correct an invalid name (#3965)

Refusing the new row was putting focus back on the field being left, so the correction was typed into the expression.

* Parameters: the invalid-name test types its expression draft (#3965)

A new row starts with a blank expression, so the regression test types 10 mm and checks that correcting the name leaves that draft in place.
2026-10-25 22:42:30 +00:00
ab80a410a1 Viewport theme: a light 3D view in a dark window, and the reverse (#4146) (#4147)
* claim: #4146

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: a light 3D view in a dark window, and the reverse (#4146)

Preferences › Interface › Theme gets a Viewport row under the theme tiles:
Follow theme (the default, as before), Light or Dark. Light or Dark draws
the 3D view in the built-in Light or Dark theme's colours whatever the
window uses, so a dark window can show the model on a light view and the
other way round; it works with every theme, theme files included.

The view takes the background and grid, bodies, selection and hover, the
origin, previews, sketches with their dimensions and glyphs, the navigation
cube and triads, box selection and the analysis colours. Panels, dialogs,
menus and the chips over the view keep the window's. Text and warnings drawn
straight onto the view (the sketch status line, the loose-end and midpoint
markers, the section's cut outlines, the 3D sketch tool and the sketch tools'
previews) take the view's side, so they read on its background.

theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light
or dark; an unknown saved value reads as Follow theme, as ColorVision's
does). Tokens::get() takes the view's colours from the other side only when
the view's dark or light differs from the window's; Tokens::view() is the
view's side for colours drawn onto it. The ground shadow follows the view
(the scene and highlight caches already key on the colours themselves),
ui.render draws in the view's colours, and ui.prefs takes `viewport_theme`
and reports `viewport_dark`. An older release ignores the setting and draws
everything in the theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: follow the single set of axis colours

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 22:17:04 +00:00
leValdemar19andClaude Opus 5.5 b94692497e Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: arc length from an arc and its end point (#754)

The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:17:01 +00:00
ArminandArmin 7bcc1ee0eb Drawing: shared number formatter (#5290) (#5315)
* claim: #5290

* doc: add configurable decimal number formatter (#5290)

---------

Co-authored-by: Armin <192400139+armin0411@users.noreply.github.com>
2026-10-25 22:11:39 +00:00
raykholo 36a60a70d9 Graphics: 1x anti-aliasing where the multisampled view draws nothing (#5819, #5870) (#5832) 2026-10-25 22:10:04 +00:00
5d17fa970b Sketch: hovering a circle's edge wakes its centre (#5043)
* Sketch: hovering a circle's edge wakes its centre

A circle's or arc's centre was hard to take with Line or Dimension: it is a small
point in the middle of empty space, taken only within 8 points of the pointer, and
nothing showed where it was. Hovering a circle or arc of the sketch being edited
now wakes its centre: drawn (a cross in a ring) and taken from 16 points away, so
the pointer can go from the edge across the inside to it. Hovering another curve
or point puts it back to sleep, as does leaving the sketch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A woken centre's extra reach yields to a curve under the pointer

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:57:23 +00:00
b5bab3f663 Browser: surface bodies get the surface icon in the Bodies folder (#4165) (#4168)
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)

Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.

Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add the surface icon to the requested-icons manifest

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:51:02 +00:00
Steven HuffandClaude Sonnet 5.5 ccea34e73c sketch: a tangent whose contact is tied by Coincident, PointOnCurve or Midpoint is solved at the contact (#2584)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 21:37:51 +00:00
c7f86c7309 Look At in the viewport context menu for a planar face or plane (#4105) (#4497)
* Look At in the viewport context menu for a planar face or plane

Fixes #4105

* Look At tests: turn the camera without the animation

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:37 +00:00
4355d117ef Assistant: warn when an Ollama model has no tool support (#4846) (#4916)
* claim: #4846

* Warn when Ollama models lack tool support (#4846)

Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.

Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.

* Keep the Ollama capability probe out of the web build

The panel never calls it there, so it would only be dead code.

* Wrap the model warning instead of cutting it off

In a narrow panel the end of the sentence, the part that says what to do, was truncated.

* Fix AgentConfig default after rebase onto main

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the Ollama no-tools warning into a pending locale file with ja and zh

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:30 +00:00
dudedagger42andClaude Opus 5.5 39951a22ff Loft: a sketch point picked in the window is an apex (#4830) (#5207)
solid.loft already closes to a point (a section {sketch, point}), but the Loft
window's Profiles input took profiles only, so a pyramid or cone tip couldn't
be made from the UI. The input now also takes a finished sketch's point, sent
as an apex section in pick order; profiles of one sketch still make one
section.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:17:14 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
5fbe058051 Sketch: a click picks the sketch's own curve over a projected one under it (#5257) (#5260)
* Sketch: a click picks the sketch's own curve over a projected one under it

* Select Other tests: follow origin visibility rename

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Own-curve pick test: click away from the lines' midpoints, which are picks of their own now

* Use the select-other test helpers main already has

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:10 +00:00
DuBearteandClaude Opus 5.5 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
dba8108369 Timeline: a reorder evaluates the design once, from the cache it already has (#6186) (#6187)
* claim: #6186

* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)

timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Marker is Copy: drop the clone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:55:52 +00:00
bherbruckandClaude Opus 5.5 57d787f5ba Docs site: canonical links, robots.txt and sitemap.xml (#6888)
Search Console lists docs.solidcraft.io/, /introduction.html (the same page) and /guide/mcp.html as duplicates without a user-selected canonical. The Pages build now adds a canonical link to every book page (index.html and introduction.html both name /), skips the redirect stubs that already have one, marks 404 and the toc frame noindex, and writes a robots.txt pointing at a generated sitemap.xml.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:35:56 -04:00
bherbruckandClaude Opus 5.5 8e61eb7d6f Release 0.23.0: version bump, design format 37 (#6868)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:18:36 -04:00
2eaa15ea04 Context menu: a right-click on a face of a selected body keeps the selection (#5849) (#5915)
* claim: #5849

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Context menu: a right-click on a face of a selected body keeps the selection (#5849)

A right-click selects what is under the cursor first, so the menu is about it. The check
for "already selected" compared the pick with each selected item by identity, so a face
of a selected body never matched: right-clicking a face of a selected body replaced the
whole selection with that one face, and the face menu opened instead of the body menu.

A face, edge or vertex of a selected body now counts as part of the selection, whether the
body is selected on its own or through an occurrence. The right-click then leaves the
selection alone, as it already did for a face in a multi-selection of faces (#3733).

selection::same_item is unchanged: dialogs and Select Other compare picks with it, and
there a face of a selected body is a different pick.

Fixes #5849.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Pass the held keys in the selected-body context menu test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:41:52 +00:00