Commit Graph
3711 Commits
Author SHA1 Message Date
semmelrindeandClaude Opus 5.5 a22ea76ab6 Feature editor: a section, an analysis or the selection changed while it is open leaves OK and Cancel working (#10687) (#10822)
The editor accepts revision changes that only changed what is shown,
counted by the display revision, but only hiding and showing counted
there. Section Analysis, the surface analyses, continuity, the
selection, the status pill catching up and view.render_select bumped
the revision alone, so turning a section off with an editor open made
OK refuse ("the design changed while the feature editor was open") and
Cancel leave the timeline rolled back. They now go through
refresh_display, as visibility changes do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:18:00 +00:00
austin62jakeandClaude Opus 5.5 a735620aa8 Circular pattern: the axis origin takes length expressions and follows them (#10852) (#10855)
* claim: #10852

* Circular pattern: the axis origin takes length expressions and follows them (#10852)

solid.pattern.circular with axis {origin, dir} kept its origin as plain
numbers, so a pattern about a parameter-driven point stayed where the
point was when the pattern was made: the seed moved with the parameter
and the copies did not. Expressions were refused (#248).

The pattern's origin is now a point of expressions, as a Mirror plane's
origin is: numbers or length expressions, evaluated on each rebuild, and
renamed with their parameters. Plain numbers are saved as numbers, as
before. timeline.edit sets pattern.origin as expressions, and editing the
pattern in its dialog keeps them. One pending format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:17:15 +00:00
rugbymauri 059119b345 solid.move: an inserted part moves in world space beside another body (#9660) (#9683)
* claim: #9660

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Move bodies of differently turned components in the world together (#9660)

A Move feature moves each of its bodies in the body's own frame by one
vector and one turn. `solid.move` mapped the world vector and axis into
the frame of the first body listed only, so a body in a frame turned
otherwise (a part inserted with a non-default direction, moved together
with a block of the root) moved along its own axes.

When the bodies listed lie in frames that turn differently (or, for a
turn, also sit in different places), the move is now split into one
Move feature per frame, each with the vector and axis mapped into that
frame, in one undo step. Bodies sharing a frame still make one feature.

Fixes #9660

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-11-02 00:16:56 +00:00
jeromehzl e016c40f43 Sketch Intersect: picked faces meet as their whole surface, not the span under the pick (#9009) (#9107)
A surface extruded from a fit-point spline is one B-rep face per span,
joined by hidden seams; the viewport picks and highlights it as one face
(Mesh::surface_patch). sketch.intersection_curve turned a face pick into
the single nearest face, so the curve stopped at that span's ends.

project3d::mesh_of now returns the picked face's surface patch and
mesh_intersection keeps the triangles of every face in it. Body sources
and Project to Surface are unchanged.
2026-11-02 00:16:06 +00:00
austin62jakeandClaude Opus 5.5 1fb9dadcd9 Language: a Traditional Chinese system opens in Traditional Chinese, macOS's zh-Hant-TW included (#10306) (#10307)
* claim: #10306

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Language: a Chinese system tag goes by its script, then its region (#10306)

macOS lists its languages with a script (zh-Hant-TW), which no catalog
matches exactly, so the base zh (Simplified) was picked for a Traditional
Chinese system. Hong Kong and Macao tags got Simplified the same way.

A Chinese tag now picks zh-TW for the Hant script, zh for Hans, and
without a script zh-TW for the TW, HK and MO regions, zh otherwise.
Other languages keep the exact tag, then the base language.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:15:53 +00:00
github-actions[bot] 91a19548d3 Regenerate generated files and fold pending files [skip ci] 2026-11-02 03:47:23 +00:00
a277839236 Section Analysis: tilting the plane rebuilds the outline index once, not on every drag frame (#10373)
* claim: sectiontilt

* Section Analysis: tilting the plane no longer rebuilds the outline index every frame (#10373)

The section outline cut through an index of slabs along one normal, rebuilt
whenever the normal changed: tilting a Section Analysis rebuilt it every
drag frame (about 0.15 s on a 2.5 million triangle part). The index is now a
grid of cells holding each triangle by where its box sits, with the box
around each cell's triangles, so it serves every normal. It finds the same
segments, in the same order and to the bit, as cutting every triangle.

The viewport keeps one index per shown body mesh, no longer per normal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:15:29 +00:00
cronos b5d931ff4c Preserve offset distances when trimming their source line (#10391) 2026-11-02 00:15:27 +00:00
Christian Glombek d7a17de3d9 Sheet metal: a perforation field bounded by a sketch's outline (#732) (#10754)
`sheet.perforate` takes an optional `sketch` (and `profiles`): the field's
outline. Holes go only inside its closed profiles, out of their inner loops,
`margin` clear of its edges, on a grid from the outline's lower-left corner.
On a folded sheet the outline maps through each panel the sketch lies on and
is clipped to it, so it never reaches a flange in the flat; a sketch on no
face of the sheet is refused. A mirrored copy mirrors the outline, and an
edit that names no sketch (the Perforate dialog has no outline) keeps it.
Without a sketch the field covers the whole sheet as before.

The feature saves `sketch` and `profiles`, a sheet's perforation its outline
in flat coordinates: one pending format note, no migration.

Assisted-by: LLM
2026-11-02 00:14:41 +00:00
leValdemar19andClaude Opus 5.5 a33619fd2b Tangent Plane: line it up with a reference plane, at an angle (#8822) (#9002)
* claim: #8822

* Tangent Plane: line it up with a reference plane, at an angle (#8822)

`construct.plane.tangent` takes an optional `reference` (a plane or planar
face) and `angle`. On a cylinder, cone or torus the plane touches where the
face turns towards the reference, turned by the angle about the face's axis,
on the side of the pick; on a sphere it is parallel to the reference. The
plane follows the reference when it moves. The Tangent Plane dialog gets a
Reference plane input and, once one is picked, an Angle field; editing the
plane brings both back. Saved as a pending format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:13:22 +00:00
austin62jakeandClaude Opus 5.5 e4e3c8609c OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074) (#9213)
* claim: #9074

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074)

The OBJ writer joined vertices only when their coordinates were equal bit
for bit, but each face of a curved body writes its edge points again a few
ulps apart, so neighbouring faces shared no vertices and the file reopened
as an open mesh with no volume.

It now welds each body as the STL and 3MF exports do (threemf::weld_tagged,
with the same tolerance), and every corner keeps its normal: the normal of
the original corner it came from, or for a point a side was split at, the
normal interpolated across the triangle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:13:06 +00:00
CamWightandClaude Opus 5.5 325917f2ae Ambient occlusion: no artifacts on the preview or on hollow bodies (#9327) (#9335)
* Ambient occlusion: the radius follows what the frame draws (#9327)

In an empty design the radius came from the model's box, which is empty, so a
preview got the smallest radius and the depth map's precision showed as specks.
It now comes from the box the depth range uses, and with nothing to draw there
is no occlusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ambient occlusion: the term drawn once and blurred by depth (#9327)

The lit pass worked the term out for every fragment it shaded, under a pattern
that changed from pixel to pixel, which read as grain. The term now has its own
texture, drawn once for each pixel of the prepass, with a fixed 4 x 4 pattern, and
a 4 x 4 blur that keeps to each pixel's plane takes the pattern out without
crossing an edge. The lit pass reads the result. The prepass and the term share
their pipelines and draw walk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:12:57 +00:00
austin62jakeandClaude Opus 5.5 5ad2503503 Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373) (#9393)
* claim: #9373

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373)

timeline.redefine runs the edited feature's command on a scratch copy with the marker just after
the feature, and takes the new definition from the feature that run makes. Inside a timeline
folder that trial feature joined the folder too; it was removed from the feature list but not
from the folder, and its id, handed back, was the next feature's. Each edit left that id in the
folder (the same one, edit after edit), naming no feature or, once a later feature took it, a
feature twice, and the reader then refused the design: "damaged design: invalid feature in a
timeline folder". The trial feature now leaves the folders as it leaves the feature list.

The reader drops a folder entry naming a feature or joint the design doesn't have, or one a
folder already holds, and opens the design: folders only group the timeline, so nothing else is
lost. A folder damaged in itself is still refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:12:50 +00:00
PapaEcho f43198988d fix(ui): keep profile-name typing out of Preferences search (#9505) (#9568)
Report focused keyboard ownership from the shared text editor, matching the other Preferences fields. Regress real Name-field typing, focus retention, unchanged search text, and saving the resulting profile.
2026-11-02 00:12:36 +00:00
Sebastian HöpflandClaude Opus 5.5 6f73bd95c4 Assemblies: dragging a part with mirrored copies no longer meshes them on every frame (#10101)
A mirror of placed bodies follows its source, so each frame of a drag evaluated
it and made new copies with empty mesh cells. A reflection can't share its
source's triangles, so every copy was tessellated from nothing, and so was
anything an evaluated feature after the mirror made.

Keep the first copy of a body with its source: each later copy is a proper rigid
move of it, so a world state draws them from one set of triangles. The model
keeps each copy's own lazy mesh. A feature evaluated again that gives the same
solids (an import) keeps its meshes.

A mirror of placed bodies no longer searches its copies' revolved faces when no
later feature can build on bodies. That depends on the design alone and is part
of the mirror's placement digest.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:11:45 +00:00
CamWightandClaude Opus 5.5 9d7544929e Tests: the same language on every PC (#10297) (#10298)
Since #10183 the app follows the system's language, and the tests followed it too, so a test
naming an English word failed on a PC set to another language. CI's runners read as English
and never saw it. In tests the system's language is now English: `cfg!(test)` for this crate's
own tests, as the engine's folders do, and the harness for the tests outside it. The preference
stays `system`, and the app is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:11:16 +00:00
bherbruckandClaude Opus 5.5 3125a79827 Release 0.30.0 (#10894)
Bump the workspace to 0.30.0 and fold the pending design format changes into format 47.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 21:55:11 -05:00
eb0cecee31 Web app: the offline check with the real app finishes its download (#10368) (#10370)
* claim: 10368

* Web offline test: each copy of a real build gets a file of its own (#10368)

With --site, the six builds were copies of one real build that differed
only in index.html. The overlapping-downloads step holds back the files
the next build lacks, so nothing of v5 was held: its download finished
before v6 launched, v6's worker then retired and deleted it (correctly,
no page used it), and the step waited 240 s to see it complete.

Successive deployments differ in more file names than that (Trunk names
files after their contents). Each copy now gets own-<build>.txt, like
the stand-in's build-named script, so v5's own file is held as the step
intends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:10:42 +00:00
semmelrindeandClaude Opus 5.5 27951f40c3 Parameters: the Filter box also reads expressions (#9706) (#10385)
Typing a parameter's name now lists every parameter whose expression
uses it, and a value finds the parameter that holds it. The filter
still reads names, comments and groups, and a text parameter's text.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:10:09 +00:00
9e3cf05c4f fix(sketch): a line of another sketch projects from the Project dialog (#10390)
A straight line of another sketch, picked into the Project dialog, came
in as a named sketch curve, which the projection preselection did not
know: it refused with "select geometry or bodies that can be projected"
although the OK button was live. The same reference the external pick
stands for is now made for it, so the line projects (#10291).

Co-authored-by: vdirienzo <vdirienzo@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-11-02 00:10:01 +00:00
Homero Thompson 6459c9fcf0 A context error is not something to report (#10181) (#10594)
* wip: the diagnosis of #10181 (the bug reproduces on current main)

sketch.project has .enabled(in_sketch) (crates/engine/src/cmd/sketch_project.rs:24)
and in_sketch (crates/engine/src/cmd/mod.rs:285) answers 'no sketch is being edited'.
Pressing P outside a sketch goes keymap::press -> sketch_tool_for
(crates/ui-egui/src/keymap.rs:451-457) -> app.start("sketch.create") with
d.then_start = Some("sketch.project"): the sketch IS created, but the Project
dialog opens and the command is refused, so the dialog shows the red row and the
'Create Issue...' button, which opens the Report a bug form over the viewport.

The probe here reproduces the bug on the CURRENT main (two variants). It is a
diagnostic probe, not the regression test: it must be replaced before a PR.

* test: a context error offers no Create Issue button (#10181)

The Project panel showed the red row for a CONTEXT error ('sketch.project is not
available right now: no sketch is being edited') and offered the 'Create Issue...'
button, which opens the Report a bug form over the viewport. A context error is
not something to report, so the panel must not offer it.

RED: the test fails with the exact message of the issue.

* fix: a context error is not something to report (#10181)

The Project panel offered "Create Issue..." for the error the engine
raises when the command is not available in the current context
("`sketch.project` is not available right now: no sketch is being
edited (Create Sketch or Edit Sketch first)"). That refusal is guidance
about the context, not a failure of the design, so there is nothing to
report: ending the sketch under an open Project panel should not invite
the user to file a bug.

error_rows already spared the missing-pick errors ("select ...", "pick
...") the same way. It now spares the context refusals too, using the
engine's own kind rather than the message text: CommandSpec gains
disabled_refusal, which is the engine's own Disabled refusal for the
command in the current session, and the UI matches the dialog's error
against it. A real failure of the command (an invalid face, say) still
shows the red row with "Create Issue...".

* style: rustfmt the test of #10181

The formatter joins the two asserts of the test onto one line (the
repository sets max_width = 150 and use_small_heuristics = Max). The
tokens of the file are unchanged: the diff is the line breaks of the
asserts and nothing else.
2026-11-02 00:09:40 +00:00
austin62jakeandClaude Opus 5.5 5e7f3651fb Angle fields: a decimal point typed into an angle stays (#10582) (#10631)
* Angle fields: a decimal point typed into an angle stays (#10582)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Angle fields: a decimal point typed into an angle stays (#10582)

Edit Canvas applies its Angle box at each keystroke and keeps the angle
in radians, so the box gets back a hair off the value it set; egui's
DragValue takes that for a change made elsewhere and rewrites the text
being typed, dropping a decimal point just typed (-3.7 became -37).
angle_field now hands the DragValue the value it set while the value it
is given is within 1e-9 of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:09:32 +00:00
Colin Faulkingham da586bc048 Fix viewport Unisolate after isolating a component (#9894) (#10635)
* claim: #9894

* Fix viewport recovery after component isolation
2026-11-02 00:09:23 +00:00
austin62jakeandClaude Opus 5.5 062a7b8288 Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653) (#10655)
* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)

The Tangent Arc tool took any first click as its start; a click on a
line between its ends snaps to a place that is no point yet (on:l3:...,
mid:l1), and the second click then failed with "unknown sketch point"
naming that internal reference.

The tool now refuses such a first click at once, with its own hint as
the error, asking the command's rule (tangent_arc_starts_at, factored
out of arc_tangent: the picked point or one at the same place, and a
drawn curve leaving it). The command refuses a snapped start with its
existing message that start must be the end point of a line or arc.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:09:17 +00:00
Colin Faulkingham 5bbfa5ea6c Sketch: preserve source geometry when deleting a pattern (#10651) (#10661)
* claim: #10651

* fix(sketch): preserve source geometry when deleting patterns
2026-11-02 00:09:10 +00:00
austin62jakeandClaude Opus 5.5 75c46dad7b Tests: the autosave scenario crashes once its autosave has landed (#10690) (#10694)
* Tests: the autosave scenario crashes once its autosave has landed (#10690)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: the autosave scenario crashes once its autosave has landed (#10690)

s25_autosave_recovery 'crashed' right after the extrude; under load the
autosave of it, written on a worker thread, had not landed, so the next
launch recovered the earlier autosave without the body (step 16).

The harness's crash restart now runs frames, bounded, until the active
autosave has caught up (Autosaver::caught_up: no write running and the
last autosave holds the design as it is). The app's own ticks still do
the writing, so an autosave that stopped writing still fails the test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:09:03 +00:00
github-actions[bot] af54b09bb1 Regenerate generated files and fold pending files [skip ci] 2026-11-02 01:51:55 +00:00
github-actions[bot] dcbca523a0 Regenerate generated files and fold pending files [skip ci] 2026-11-02 01:42:49 +00:00
froglemonade2andClaude Opus 5.5 e9b08f4af4 Control channel: report the dialog as data, the open tool windows, and what ui.start opened (#9087) (#10740)
* claim: #9087

* Control channel: report the dialog as data, the open windows, and what ui.start opened (#9087)

`ui.inspect.dialog` (and `ui.editFeature`'s reply) was the dialog's Rust Debug text, which
changed with every refactor and couldn't be parsed. It is now an object: the dialog's command,
title, the feature an edit rebuilds, its selection inputs, its error, and the commands OK runs
(or what it waits for). `hover` in `ui.inspect` and `ui.selection` is a selection-like item
instead of Debug text.

`ui.inspect` gains `windows`: the tool windows open beside the model (Parameters, Bill of
Materials, Design Properties, Sketch Report, material card review) by the command that opens
each, and the Help menu's (About, Updates, Shortcuts, Crash Reports, Report, Messages) by their
`ui.help` item. Before, an agent couldn't tell these windows were open.

`ui.start` and `ui.editFeature` reply with what they opened (tool, dialog, windows), the status
line, and `pending` when the start waits for the history and opens on a later frame.

Scenario `dialog` checks match words of the dialog's state from the app directly, so the
scenario files are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:08:48 +00:00
Dahak BuildsandDahak Builds 6a7275a5af Agent chat: copy an entire sent prompt or assistant message (#10675) (#10741)
* claim: #10675

* agent chat: Copy message on each sent prompt and assistant text block (#10675)

A visible Copy message button on each copyable transcript message and a
right-click menu with the same action. Assistant replies copy their
original Markdown, prompts copy the text as entered; picture-only prompts
and thoughts get no action. Hover-only message areas keep partial text
selection working.

* agent chat: complete Copy message locales and tests (#10675)

* agent chat: route the message copy menu through ui_kit::Container (ui-containers gate)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 00:08:41 +00:00
PapaEcho 666356dba0 Assistant: configurable show/hide shortcut (#10764) (#10767)
* claim: #10764

* Assistant: make show/hide shortcut configurable (#10764)
2026-11-02 00:08:23 +00:00
austin62jakeandClaude Opus 5.5 3fe2b3386f Sketch: Remove Spline Point takes one point out of a spline (#10783) (#10793)
* Sketch: Remove Spline Point takes one fit point out of a spline (#10783)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: Remove Spline Point takes one point out of a spline (#10783)

sketch.spline.remove_point takes one fit or control point out of a
spline. The spline keeps its id and runs through its other points, which
stay where they are. The point goes with the constraints on it, unless
another curve uses it. A closed spline's closing point, an end joined to
other geometry, the last 2 points (3 when closed), and projected, offset
or patterned splines are refused with a message.

The right-click menu of a spline point, picked alone, offers it beside
Reverse Spline Direction.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:08:11 +00:00
Colin Faulkingham afe06a1a3d Edit Joint: show components for point and frame origins (#7749) (#10838)
* claim: #7749

* fix(ui): show components for point and frame joint origins
2026-11-02 00:07:29 +00:00
Colin Faulkingham eaf34d2528 Construction planes: refuse duplicate feature names (#10707) (#10743)
* claim: #10707

* Fix construction plane name collisions (#10707)
2026-11-02 00:06:59 +00:00
Dahak BuildsandDahak Builds 2b9261050f Sketch: stop tying expression-placed points to the origin with an automatic Coincident (#10703) (#10722)
* claim: #10703

* Sketch: do not tie expression-placed points to the origin with an automatic Coincident

A point whose coordinates are parameter expressions follows those
expressions. When they came to 0 at draw time the point landed on the
origin and connect_points tied it there with a Coincident, exactly like
a snapped click; the next parameter change then conflicted with the tie.
connect_points now skips points that carry exprs; plain-number points
keep the snap.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 00:06:51 +00:00
semmelrindeandClaude Opus 5.5 eac1425661 Hole: a face name shared by two bodies is no split face (#10699) (#10872)
* Face names: one name on two bodies is no split face (#10699)

A hole placed on the top of one of two bodies an extrude made, or on a
piece of a split body, warned "face `F2:top` was split; using the piece
nearest the picked point": the face name is on both bodies, and any
name found more than once counted as split. A name on several bodies,
one face on each, now finds the face the point lies on without the
note; pieces on one body, or a point on none of them, still say split.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: look for a face name shared by two bodies on the body the point is on (#10699)

The lookup over every body counts a name on several bodies as split on
purpose (a copy's face is not a piece of the source's, see
`the_same_face_on_a_copy_is_not_a_piece_of_the_named_bodys_face`), so
the first change, which made it unique there, is undone. A hole whose
face name is found split while its point lies on one of those faces now
looks again on that body alone: one face of the name there is the face,
whole; pieces on that body still say split.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:06:43 +00:00
github-actions[bot] 88dbda42a7 Regenerate generated files and fold pending files [skip ci] 2026-11-02 00:31:13 +00:00
Homero ThompsonandHomero Thompson 9e30ff5878 fix(#5505): a zero length dimension keeps constraining the sketch (#10790)
The residual of a length dimension is the magnitude of the distance between
the line's two ends. At zero the magnitude has no derivative, so the rank
analysis read the constraint as if it were not there and the sketch reported
a degree of freedom that was not there.

At zero the two ends of the line meet, so the residual says it with the
vector between them, the way a coincidence does. That is the treatment a
distance of zero already gets (upstream #4397); the length family was left
out of it.

Regression test: crates/sketch/src/tests.rs, zero_length_keeps_the_line_constrained.

Co-authored-by: Homero Thompson <homero@local>
2026-11-02 00:05:09 +00:00
4c4c768d57 Cancel button on the Computing toast (#8266) (#10366)
* claim: #8266

* Computing toast: a Cancel that gives up on the move (#8266)

The Computing toast for a history command (marker move, undo, redo,
suppress, reorder) or a delete's check computing off the window thread now
has a Cancel button. It drops the job and the commands queued behind it;
the design stays as it was, since a deferred command only runs for real
once its evaluation is in. A feature edit applying keeps its dialog's own
Cancel, so its toast shows none.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:04:53 +00:00
Dahak BuildsandDahak Builds 83fe1f874f Sketch Project: keep hidden origin planes hidden in Project (#10778) (#10834)
* claim: #10778

* Sketch Project: keep hidden origin planes hidden (#10778)

WIP from dead worker: fix + test written, gates not yet run.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 00:04:45 +00:00
Colin Faulkingham 0734616104 View cube: follow the selected projection (#10634) (#10640)
* claim: #10634

* Make navigation cube follow viewport projection (#10634)
2026-11-02 00:04:43 +00:00
Dahak BuildsandDahak Builds d68d86dae9 Dialog form cards widen their label column for the current language (#10620) (#10646)
* claim: #10620

* widen dialog form-card label columns to the measured label width (#10620)

* fix compile of the grow tests

* grow the card only past the label cap and tag the form scope in place (#10620)

* keep scope_grow crate-internal so the gallery scan stays element-only (#10620)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 00:04:41 +00:00
rugbymauri 7d86a8cfd3 Sketch: dragging a constrained centre point of a centre rectangle moves it, not resizes it (#10510) (#10535)
* claim: #10510

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Sketch: dragging a centre rectangle's constrained centre point keeps the rectangle's size

A centre rectangle's centre sits on the middle of its diagonal, and a
press there picked the diagonal's midpoint before the centre point. The
drag then took the diagonal by its middle: with the centre free the
rectangle moved along, but with the centre held (on the origin, on a
line) the diagonal turned and stretched about it, and the rectangle
grew or shrank with the pointer, many times its size.

A drag that starts on a line's middle where a point is held by a
Midpoint constraint now drags that point, as a drag that starts on the
point does. A centre held on the origin stays there and the rectangle
keeps its size; a centre on a line slides the whole rectangle along it;
a free centre still moves the rectangle. Clicking the middle still
selects the line's midpoint for constraints.

Fixes #10510

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-11-02 00:04:38 +00:00
semmelrindeandClaude Opus 5.5 cea07cbc66 Sketch Slice: cut at the sketch plane while a Section Analysis is on (#10705) (#10768)
With a section on, Slice in the Sketch Palette lit up but the model was
still cut only by the section: the viewport took the sketch's plane only
when there was no section. Slice now takes it whenever it is on in the
sketch being edited; the section comes back when Slice is turned off or
the sketch closes. A slice is hatched as it is without a section.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:02:59 +00:00
Colin Faulkingham 0b90731096 Dialogs: readable sketch selection labels (#10752) (#10770)
* claim: #10752

* Fix readable sketch selection labels in dialogs (#10752)
2026-11-02 00:02:37 +00:00
SilentWolf75andCursor afa4f72f7d Insert SVG: say why a sketch is too large (#10874) (#10880)
* claim: #10874

Co-authored-by: Cursor <cursoragent@cursor.com>

* Insert drawing: name the sketch size cap when a file is too dense (#10874)

A large SVG/DXF failed with opaque \"sketch is too large\". Say the 20000 point/curve limit and that scale alone does not reduce entity count, and refuse dense drawings before adding them.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-11-01 23:37:55 +00:00
Sebastian HöpflandClaude Opus 5.5 cfc46448a8 Joints: an edge origin shares the joint faces' measurement (#10866)
`face_of` called `Body::faces`, which tessellates the whole body, on every
solve. Face origins went through the cached `ModelBody::joint_faces`, at
the same tolerance, but edge origins never did, so one edge origin on a
large body cost a drag or a Drive Joints step far more than the solve.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 22:51:42 +00:00
github-actions[bot] 58c64ca4d4 Regenerate generated files and fold pending files [skip ci] 2026-11-01 22:29:27 +00:00
5c7e50cb67 Preferences redesign 2/11: shared widgets and painters in ui_kit (#9874) (#9890)
* claim: #9874

* Add shared Preferences cards, figure painters and gallery entries to ui_kit

* Preferences: Arabic, Hebrew and Vietnamese carousel labels

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Use the app's selection colours in the Preferences cards

* Measure Preferences figure inks and use shared palette metrics

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 21:58:35 +00:00
Colin Faulkingham b6aabb88ff Insert Design: place reused links from their parent origin (#10813) (#10825)
* claim: #10813

* fix: place reused linked designs from parent origin (#10813)
2026-11-01 21:47:53 +00:00