Commit Graph
6 Commits
Author SHA1 Message Date
yhamil04andClaude Opus 5.5 a3483ed451 Body rename: an imported assembly's other bodies keep their names and components (#2175) (#6615)
* claim: #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Body rename: an imported assembly's other bodies keep their names and components (#2175)

An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.

`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.

Fixes #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:39 +00:00
NOWN-DEVandClaude Opus 5.5 3592031d5e fix: joints on an imported part's hole or face stay on that part (#6368)
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.

named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:16 +00:00
Karl Von Richter 0dffb206b1 Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains

Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(fix): update movable fixtures for first-part grounding

Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): keep the motion-cost crank free

Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): free the frame placement fixture

Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.

Signed-off-by: Karl Von Richter<karl@embeint.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-23 23:15:34 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
NOWN-DEV 713111d9df STEP export: an inserted assembly's nested parts are placed once (#1895)
Thanks @NOWN-DEV.
2026-10-17 04:08:26 -04:00
bherbruckandClaude Opus 5.5 27529d9742 Imports become components; STEP assemblies as nested components (#1386) (#1426)
* Imports become components: a STEP assembly's tree as nested components (#1386)

Every imported file (STEP, IGES, 3MF, STL, OBJ: inserted, dropped, opened as a
design, or file.insert_step / file.insert_mesh / doc.open from scripts, the CLI
and MCP) now comes in as a new component named after the file, with its Import
feature inside it. A STEP assembly's products become nested components; a part
placed more than once is one component with an occurrence per placement, and
the Import feature skips the file's later copies (`skip`, format 21 note). The
contents are held as one rigid group (rigid joints, glyphs hidden); moving an
inner part is refused until component.unlock ("Unlock Contents") releases it.
Y up turns the import's component. Replies report component, component_name
and occurrence. Undo is one step; designs with loose imports are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keep an import's rigid group hidden when the window loads the file in the background

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Import instances' skip list is format 22: format 21 ships in 0.12.0

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Catalog entries for Unlock Contents

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 11:04:49 -04:00