* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens
* ui: per-tab accent behaviour and a larger application bar with a Start page button
* icons: silhouette master and flat assistant and agent link icons (open for review)
* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)
* icons: wire the silhouette master to inspect.silhouette; record the accepted icons
* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers
* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins
* ui: ribbon painting to the compact design
* ui: smaller icon button highlight and assistant mark on the bubble corner
* ui: short ribbon labels that wrap at spaces
* ui: ribbon buttons fit their labels and Finish Sketch shows its full name
* ui: constraint gallery, workspace menu, section list headings and richer tooltips
* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design
* ui: document tabs as rounded chips with a dimmer inactive label
* ui: document tabs fit their names and show close only when active or hovered
* icons: close and plus masters for the document tabs (open for review)
* ui: centre the new-tab plus and overflow button on the bar
* ui: a quiet rule under the ribbon tabs on non-contextual tabs
* ui: the application bar mark separates its faces with the bar colour, not white
* ui: open ribbon section label uses the selected tint and a chevron
* ui: dim the tab close and plus icons until hovered
* ui: every ribbon dropdown uses the chevron, the workspace card included
* ui: the active document tab uses the design's surface colour
* ui: the bug button's right padding mirrors its icon side
* ui: square constraint cells and a rule before the grid
* ui: constraint cells back to their earlier size, keeping the rule
* ui: smaller constraint cells and icons, centred in the section
* ui: constraint cells fit the height of the large buttons' icon and label
* ui: sketch Create titles share the other labels' line
* ui: format the application bar and ribbon changes
* ui: active tab surface token and the colour and hover tests that follow the redesign
* tests: the merged parameter and narrow toolbar tests follow the compact ribbon
* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations
* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* perf: renaming a feature evaluates nothing (#3044)
A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)
Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
A closed loop whose joints meet a few nanometres apart along their parallel
axes (faces modelled that far apart) passes the conflict check, but the loop
solver wanted 1e-7 mm before it moved anything. No value of a planar loop
takes such a gap out, so every drive of it stopped at once (stopped_by_loop,
fraction 0) and joint.reach called the loop open.
The solver now closes such a loop as far as it comes and, when what is left
is within the conflict check, keeps it that closed on the way. joint.drive,
joint.reach and the nearby pose of the dof count share it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation: trimmed faces of display meshes stay on their surfaces
Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Tessellation: one boundary rule for every mesh; drop the #1648 retry
A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Thread preview test: wait for the stale fit error to clear before the next preview
After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On an imported part with 2.5 million triangles, every frame of a Section
Analysis drag looked up the picked face's plane several times (each lookup
tessellates the whole body, about 0.1 s) and cut every triangle again for
the outline (38 ms).
- planar_face keeps its last answers for the model state they were found in.
- The outline cuts through a SectionIndex: the mesh's triangles sorted into
slabs along the cut's normal, kept per mesh while the normal stays, so a
cut looks at one slab (0.06 ms on that part) and finds the same segments.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* inspect.interference/clearance: list mesh bodies as unchecked
Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair
was formed, so two overlapping STL imports reported count 0 and an empty
unchecked list, which reads as "no collision". Each mesh body is now
listed in `unchecked` as {a: name, b: null, reason: "mesh body: not
checked"} by both commands. inspect.clearance also stops refusing a mesh
body named in `bodies` or `against` as "no solid body"; it is listed
instead. The parameter docs and the assemblies guide say so.
Fixes#3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: separate the mesh-body note from the paragraph above
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3393
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)
A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
While editing a dimension's value, a single click on another driving
dimension now inserts its parameter name (a double-click no longer needed,
and its second click does not insert it twice). A lone value such as `10`
or `10 mm` is replaced by the name; an expression in progress keeps what
was typed and gets the name at the cursor (replacing selected text), so
`10 + ` becomes `10 + d10`. The cursor ends after the name and the field
keeps the keyboard.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2716
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Editing a sketch past the history marker rolls the marker to it (#2716)
Edit Sketch rolled the timeline back to just after the sketch only when
the marker was later. With the marker before the sketch it stayed there:
the sketch wasn't built, so it opened with no palette and couldn't be
edited. The marker now moves to just after the sketch either way, and
Finish Sketch puts it back as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3323
* Contact: a check finds bodies crossing face to face, not only a corner inside (#3323)
The collision probe sampled each tessellation's points (vertices, edge
midpoints, triangle centres) against the other body, so plates crossing
face to face - where the crossing strip is smaller than a face triangle -
put no sample point inside and went unreported while inspect.interference
found the overlap. Where an edge of one body passes through the other's
surface, the middle of the chord it cuts lies inside; its distance from
that surface is the depth. Touching and grazing are unchanged. The sweep's
collision work model pays for the added edge pass.
---------
Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
* claim: #2724
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* Sketch: an angle between two lines from one point measures the angle between them (#2724)
An angle dimension on two lines that share an end (two radii of a circle, the
two sides of a corner) took the acute reading of the lines' directions, so
radii 120° apart measured 60° and 150° apart 30°. With no text position given,
the angle is now measured from the shared end towards the lines' other ends,
the reading anyone would mean; the supplement stays the alternative reading.
Lines that share no end, and dimensions placed with a text position, are
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* ci: re-run the checks; the run on the last push was cancelled
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A body rename changes names only, but committing it went through the general
"design changed" path: the whole timeline was evaluated again. On an imported
assembly that means reading the STEP file again and meshing every body (about
100 s on the Prusa Core One, and the same again for undo).
When the only change from the previous design is one body rename (the
features' stored body names and the body-keyed maps the rename updates), the
model now renames the body in its results instead: every body keeps its
geometry and meshes, and the fingerprints are set to the renamed design's so
the next evaluation reuses everything. Undo and redo of the rename take the
same path. A rename the model can't follow that way (the body is changed or
named by a later feature, sheet metal, threads) still evaluates the design as
before.
`bench-open --ops script.json` times commands and their undo on an opened
design, with the view work each leaves.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The test could lose a race: with a zero wait the evaluation sometimes finished and applied
before the check that the dialog was still computing. The evaluation is now held at a test
gate until the dialog has been seen saying so.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: adopt the saved model on open (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: tests
* WIP: bench-open opens as Open does
* docs: opening from the saved model
* Tests: an edit after opening evaluates from the feature it changes
* clippy
* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper
* Open: no picture from the model when the model itself opens; cancel test evaluates
* Saved model: bodies passed through found without writing their record; states list runs of bodies
* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again
* Model cache size guard: the saved model's writer
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3248
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* sketch.create: reject a custom plane origin that is not three numbers
A custom plane {origin, x_dir, y_dir} whose origin was given as an
expression ("w/2") or a number with a unit ("20 mm") silently became
[0, 0, 0], while a bad x_dir or y_dir was an error. A missing origin is
still the world origin; one that is present but is not three numbers now
returns a clear error. Expressions are not evaluated, so the saved
format is unchanged.
Fixes#3248
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* joint.inspect: what each joint is attached to, for agents
A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.
MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: catalog entries for Inspect Joint (en, ja, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.
With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The merge queue reads the required ci check from the newest run of a commit. Adding any label but
approved-for-ci starts a run whose jobs all skip, and its ci job was skipped too (as
'ci (ignored label)'), so a pull request that had passed could not enter the queue (#1850, #3182,
#3252). On such a run the ci job now waits for the commit's other runs to finish and passes only
when the newest one that ran its checks passed.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3234
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sheet metal: refuse an edge flange on a flange's bend line (#3234)
A pick on the edge where a bend meets the plate (or the flange panel)
found a panel edge that is already a bend line and made a second flange
on it, leaving a gap and a sheet of two shells. add_flanges_each now
refuses such an edge before anything moves.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
The test turned a temp path into a link with `file://` + the path, which on
Windows gives `file://C:\Users\...`, not a file URL, so the test failed there.
It now builds `file:///C:/Users/.../my%20part.stl` on Windows (what Explorer
and browsers put on the clipboard) and `file:///tmp/...` on Linux and macOS,
as before. `files_in_text` already reads Windows file URLs correctly; the
fixed test now checks that on Windows.
Co-authored-by: Ray <raykholo@users.noreply.github.com>