Commit Graph
2134 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 8b326f5ced kernel: the solid loft's rails anchored by loft_rails::railed; path curves shared
smlib_sweeps' loft_rails kept its own copy of the rail law with the anchoring
4056 was refused by (a rail lying in the last section's plane met at its first
crossing there). It now builds the sections with loft_rails::Section and takes
the sections and stations loft_rails::railed gives, so the law and its fix live
in one place. path_curve is exported beside curve for the sheet builders.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:31:37 -04:00
jyvikoandClaude Opus 5.5 2417072766 kernel: the touching-face checks, extrusion batching and clearance probe are gone
The doc puts exact tools into SMLib's boolean as drawn, so nothing asks whether a touching tool
can be joined, batches extrusions, or probes for room to grow a profile.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:30:36 -04:00
jyvikoandClaude Opus 5.5 3a29441f8b doc: a sheet bore is cut once, with the drill clipped to its panel
machine_bores cut with the drill clipped to the panel and, refused (coincident faces at the
panel's rims), cut again with a longer cylinder a hair past the panel. SMLib's boolean takes
the flush ends exactly, so the clipped drill is the one cut; its refusal is passed on.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:30:12 -04:00
jyvikoandClaude Opus 5.5 427a77629d doc: a lip is SMLib's raised band and a groove its exact rim band, nothing else
A lip tried kernel::raise_band and, refused, joined an extruded band in its place (whose
walls coincide with the walls below); a groove tried kernel::rim_band and, refused, cut a
band offset from the rim face's display-mesh loop (a sampled outline). Both second paths are
gone: a refusal of the exact band is the feature's refusal. offset_left, which only the
sampled band used, goes too. The rim and opening checks are unchanged.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:30:12 -04:00
jyvikoandClaude Opus 5.5 744a4c80d2 doc: extrude and revolve tools go into the boolean as drawn
SMLib's boolean takes touching and coplanar faces exactly, so the tools no longer bend
around them, and no tool is tried a second way after a refusal:

- extend_for_coplanar / grow_profile_for_coplanar (a cut or join tool run on past faces it
  lies on, its profile grown out of walls it touches), Surroundings and its clearance probe,
  fill_void_holes (holes over empty space taken into the profile, #1360),
  trim_embedded_join_ends (a join's buried ends cut off, #2059), the touching-face checks
  (kernel::can_join_touching_faces / can_join_all_touching_faces) that decided when the
  exact tool could go in, the profile that "grows wherever the samples find room" when the
  build failed, region_samples, and the revolve's grown profiles;
- a tapered tool's run-on into the face it stands on (taper_run_on_fits, face_level_at) and
  its straight TAPER_FOOT: the tapered tool is the profile drafted over its length;
- apply_traced's batched boolean that, when refused, put the model back and ran the tools
  one by one (and common_join_target, which only it used): the tools run as the operation
  always runs them;
- a pattern's copy of a reduced fillet tried again as a new fit when the copied radii were
  refused: the copy uses the radii the original was built with;
- union_apart / join_apart errors are passed on instead of leaving the tools apart.

The command behaviour stays: the same tools, the same lineage, the same at-once boolean of
tools apart. The tests of the deleted growth and trimming (coplanar_growth_tests) go with
them.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:30:12 -04:00
jyvikoandClaude Opus 5.5 b6a988d988 doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep
thread_groove built the faceted mesh groove truck cut; nothing calls it since the thread
cut is SMLib's screw sweep (kernel::sweep_helix) and a B-rep boolean. With it go
GrooveShape's facet count and the refusal it fed ("the modelled thread is too fine for this
diameter"): an exact groove has no chord error, so a fine thread on a large diameter is cut
as drawn. Dimensions that are not finite are still refused.

kernel::sweep_helix_mesh is now called only by crates/engine/src/thread_tests.rs.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:30:12 -04:00
jyvikoandClaude Opus 5.5 caf32f076f kernel: loft blend on the record, through bridge's record API
loft_blend hands its net to surfaces::tensor_sheet (the bridge's own one-face sheet);
section_frames picks the face that bounds the whole chain and faces the run best from the
record's edge uses and the face's SurfaceEval normal, and reads its frames with
bridge::frames. Behaviour and messages unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:29 -04:00
jyvikoandClaude Opus 5.5 ff360526a1 kernel: surface match on the record, through bridge's record API
match_surface and seam_continuity read faces as record surfaces (SurfaceEval over the
face's domain), pick the face and its kept side's edges from the record, chain and frame
the target through bridge::chain/frames, keep the crown whose bridge strays least from the
original, and turn the bridge face to the target's sense by building it again turned
(surfaces::Parts). The history is over [body, target]: the face modified from the body's,
its edges new. Behaviour, constants and messages unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:29 -04:00
jyvikoandClaude Opus 5.5 de19b2fa35 kernel: the general fill on loops of five or more edges, its patches about a centre
general_fill takes loops of three to sixteen edges. quilt_body assembles fill_iso's
patches into one sheet: each loop edge whole, or for five or more its two halves at the
middle of its interval, both on the edge's exact curve record and sharing a midpoint
vertex; each spoke a new edge from that vertex to the centre; every pcurve the straight
line in (u, v) of its side. The history marks every face generated, each edge or half a
piece of the body's own edge, each spoke new. A reversed loop edge's knots keep the
interval's ends exactly, so pieces name the edge's own vertices.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:29 -04:00
jyvikoandClaude Opus 5.5 1c64532575 geom: fill_iso fills loops of five or more edges with patches about a centre
A loop of N >= 5 edges is N four-sided patches about a centre point: each edge split at
the middle of its parameter interval, a spoke from each midpoint to the centre, patch k
on the second half of edge k-1, the first half of edge k and the two spokes beside them.
All patches share one compatible space, so each spoke is the same control points in both
patches it divides and the centre one point; the least-squares solve takes them once
and adds rows opposing the two patches' derivatives across each spoke (tangent there).
The one- and three-/four-sided fill is the one-patch case of the same model. The result
lists each patch's sides (edge pieces with their parameter ranges, or spokes) and the
spoke curves; every pcurve is a straight line in (u, v).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:29 -04:00
jyvikoandClaude Opus 5.5 359cb8af82 kernel: intersection edges exported from the crate root
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:07 -04:00
jyvikoandClaude Opus 5.5 d832af1b03 kernel: an intersection curve is where SMLib's imprint cuts, exactly
sketch.intersection_curve (LinkSource::Intersection, crates/doc/src/
project.rs) intersected the two bodies' display meshes triangle by triangle
and chained the segments into polylines: a curve known only as points, off
the true intersection by the meshes' chord.

kernel::meeting_edges(a, a_face, b, b_face, chord) takes each side whole or
as one face (that face alone as a surface body, surfaces::taken), tags both
and imprints the first by the second in SMLib (smlib_imprint: "each of its
faces that `tool` meets cut along the intersection", capi/include/smlib.h).
SMLib intersects the faces' surfaces and trims each curve to both faces, so
the edges the imprint makes are exactly where they meet; its own history
says which they are (an edge no edge of either operand became). Each comes
back as its record curve on its interval, from SMLib's export of the
imprinted body, with its points from that body's mesh at `chord`. Sides that
do not meet give none.

The intersection link now stores each edge as a wire with its exact curve
(Wire::exact, the existing WireCurve; no new type or format change), its
points at 1/1000 of the larger body. project3d::mesh_intersection, its
triangle/triangle test and segment chaining go; project3d::mesh_of becomes
part_of (the body and, for a face reference, the face index).

Needs in crates/kernel/src/lib.rs (the coordinator's): `mod intersection;`
and `pub use intersection::{MeetingEdge, meeting_edges};`.

Not built: base in progress (kernel-smlib/no-truck 513ebe47 does not build).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:27:07 -04:00
jyvikoandClaude Opus 5.5 d4cc0fd2a6 AGENTS.md: SMLib is the kernel; no switch, no other kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:24:13 -04:00
jyvikoandClaude Opus 5.5 4e7bd1f764 kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:23:53 -04:00
jyvikoandClaude Opus 5.5 ab52c5999a The truck crates leave the workspace; the rig and threads run on SMLib alone
truck-modeling, -topology, -shapeops, -stepio and the vendored truck-geometry, -meshalgo,
-shapeops, -stepio and matext4cgmath (with their attribution rows and vendor notes) are removed.
The kernel-cases runner has one kernel, SMLib, and no build-mismatch check; a modelled thread is
cut by SMLib's exact screw-swept groove (the faceted groove path is gone).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:23:52 -04:00
jyvikoandClaude Opus 5.5 508b6b7332 kernel: boundary surfaces on the record
Edge chains are the body's record edges, walked along their curves the way the
chain runs; G1/G2 conditions read the open edge's face on the record with its
exact first and second derivatives (SurfaceEval::derivs, ::second). The face is
built on the record: each side the network surface's boundary row on its knots,
split at the chains' inner vertices into edges over parts of the side's interval
(no knot insertion), each with its straight pcurve; a collapsed side is left out.
boundary_join counts the record's edges. Tests ported.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:22:31 -04:00
jyvikoandClaude Opus 5.5 4fc1dddac4 kernel: Patch of a body's edges is fill's patch with no crown
fill::patch_loop makes the planar face of a certainly planar loop and the patch
otherwise; patch_edges keeps its own copy of neither.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:22:31 -04:00
jyvikoandClaude Opus 5.5 513ebe47f0 kernel: mesh bodies built by Body::of_mesh; fuzz booleans have no fallback counts
Mesh distance callers take geom's closest_on_triangle in place of the deleted guard's copy.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:22:03 -04:00
jyvikoandClaude Opus 5.5 8f88c1cb95 kernel: crate root follows the split, surfaces and SSI ports
coplanar, planar_faces and seam_faces are gone (strategies around the old mesh boolean); their
remaining tests mount from the crate root.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:21:11 -04:00
jyvikoandClaude Opus 5.5 a18ec566be solidcraft-smlib: ssi hands out SMLib's intersection curves exactly, as schema 4 B-splines
ssi::intersect took a sample count and gave each intersection curve as
samples: its 3D points, its UV points on each surface and the surfaces at
them. The fork's 947eedc hands out the curves SMLib's intersectors return,
exactly (smlib_ssi_curve_nurbs: degree, knots, control points, weights), and
drops the samples; SMLIB_ABI_VERSION 4.

SsiCurve now holds the 3D curve as a schema 4 Curve::Spline or
Curve::RationalSpline (rational where a weight is not 1) and each UV curve
the method returned as a Curve2, with SMLib's type, deviation estimate and
the 3D curve's natural interval; ssi::intersect loses its sample count. A
curve SMLib does not hold as a B-spline is Error::Unsupported (it is never
approximated); a B-spline whose knot count is not points + degree + 1 is an
argument error.

The SSI corpus scorer (tests/ssi_corpus.rs) samples the exact curves itself
where the corpus runner samples them: 4001 parameters spread evenly over the
3D curve's natural interval and over each UV curve's interval, the surfaces
evaluated at the UV samples, samples that cannot be evaluated dropped. The
unit test plane_through_sphere_is_a_circle evaluates the exact curve.

Nothing else used the samples. SMLIB_REV: the fork at 947eedc.

clippy -p solidcraft-smlib --all-targets, with and without native: clean.
The corpus gate (smlib_global_intersect_at_1e_6) is not run here.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:21:02 -04:00
jyvikoandClaude Opus 5.5 d2713f55f8 kernel: T-spline and offset tests read the body's record
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 0323dfd6d2 kernel: bridges and surfaces read the body's own record
bridge::{chain, frames, frames_across, chain_closes} and surfaces take
body.record() instead of encoding one; a surface body is Body::from_record of the
canonical record, a stitched one Body::from_smlib_record of SMLib's export, its
history matched to the input record when SMLib's import numbers it alike.
record::attach takes the new form.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 b1874b7c09 kernel: bridges read their support faces on the record
The bridge core was already its own geometry; its readings went through truck.
Chains are edges of the body's record (index, direction), measured along each
edge's record curve the way the chain runs; a support face is a record face whose
surface is evaluated with its exact first derivatives (SurfaceEval::derivs) where
truck's were finite differences; the station's parameters come from SurfaceEval's
projection. The bridge face is surfaces::tensor_sheet, and blend_between records
it as new over [a, b]. frames, frames_across and chain_closes take the body and
face index. Boundary patches go through the same bridge. Tests ported.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 435f5ec36a kernel: T-spline sheets as record faces; NURBS faces on the record
surfaces.rs gains the record pieces NURBS faces are built from: a NURBS surface
and curve as record geometry, a pcurve along a parameter line, a whole tensor face
bounded by its net's boundary rows and columns (exact for a clamped surface), and
all_new for a face new to an operation. tspline_sheet makes a regular T-spline
that tensor face and an irregular one its Bézier elements, each side split at the
T-points, each edge an exact Bézier piece of its side with a straight pcurve on
every patch it bounds, shared between neighbours. Tests ported to the record.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 30c682d2e9 kernel: surfaces on the schema 4 record and SMLib
Copy, unstitch, reverse and remove faces, Patch (a sketch region, or a planar loop
of a body's edges) and Extend work on the body's record: Parts puts any faces,
edges and vertices into canonical order, and each face taken is the body's face
(Kept), its edges the body's. Sheets are SMLib's sweeps with no caps (extrude,
revolve, curve sweep, stations for twist/scale/orientation/rails), a chain at a
time; a loft lofts each column of matched segments and stitches the columns.
History: a wall comes from the segments its edges in the start plane lie along.
Stitch joins the bodies' records and sews them with smlib_stitch, faces and edges
carried back to the bodies through SMLib's tags. Offset Surface offsets each face
on its own with smlib_offset_sheet and stitches the offsets within the tolerance:
smooth neighbours stay joined, sharp ones come apart, as before; the fitted
offset surfaces and their fold check are gone. Thicken is SMLib's thicken.

Not yet: a surface sweep along a path with corners (refused). Tests ported;
the fold-radius message test now checks only the refusal.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 75812b6672 kernel: loft rails on exact NURBS sections, the last section met where the rail ends
loft_rails.rs placed stations between truck wires. Its law now works on the
sections' exact NURBS curves (Section, from the sketch segments' record curves)
and returns the sections and stations, each a curve list a loft is skinned
through; nothing of truck is left.

Case 4056 (a keel rail lying in the bow's sketch plane): rail() anchored every
section at the rail's first crossing of the section's plane after the section
before. A rail lying in the last section's plane crosses it all along, first at
the far section, 100 mm from the bow's curve, and the loft was refused ("a guide
rail crosses section 2's plane"). A rail runs from the first section to the
last, so the last section is met where the rail ends; the sections between are
met at their first crossing, as before.

smlib_sweeps.rs's solid loft_rails keeps its own copy of the anchoring and has
the same cause; it should call loft_rails::railed.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 9d252e51f8 kernel: an arc's knots built without a borrowed temporary
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 c2f699712c solidcraft-smlib: Brep::stitch and Brep::offset_sheet, and the fork pinned at e3d478d
The safe wrappers of the fork's smlib_stitch (a body's faces sewn at a tolerance,
oriented, with whether it closed) and smlib_offset_sheet (a sheet's faces onto
their offsets), for the kernel's Stitch and Offset Surface.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:20:49 -04:00
jyvikoandClaude Opus 5.5 21e0f8d9c6 kernel: profile segments as exact schema 4 edge curves and pcurves
freeform.rs turned each free-form sketch segment into a truck edge. It now gives
every segment (lines, arcs, Béziers, conics) as a record curve and its pcurve on
the sketch plane's own surface, on one parameter with the same knots and weights,
so the pcurve lifts onto the edge exactly.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:19:38 -04:00
jyvikoandClaude Opus 5.5 3ff9933302 kernel: a trimmed piece's side is read at a point inside it, exactly
trim_keep told each piece's side of the tool from the tool's field at the
centres of its mesh triangles. Each piece now takes one point on its own
surface inside its trims (SMLib's CalculateAnInternalPoint, through
smlib_face_points), mapped to the record's face order through SMLib's
numbering of the split body; the tool's field there says the side. A piece
whose side can't be told is an error, never guessed.

(not built: base in progress; no errors in this file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:19:38 -04:00
jyvikoandClaude Opus 5.5 b1223a7b23 solidcraft-smlib: Brep::face_points, a point inside each face (smlib_face_points)
Each face's point from SmFace::CalculateAnInternalPoint, in SMLib's face
order; the fork at 89a1933 (also: smlib_extend_sheet extends every surface
as SMLib's B-spline, its analytic kind given back).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:19:38 -04:00
jyvikoandClaude Opus 5.5 a66dbe227f kernel: coplanar faces joined by SMLib's merge_faces, the record read from the body
planar_regularize now calls the fork's smlib_merge_faces as it is
(SmBrep::RemoveTopologicalEdgesAndVertices with the edges under the kept points
staying): every edge the lineage does not choose is kept by a point at its
middle, so SMLib joins the faces across the chosen ones only. A body with more
kept edges than one call takes stays as it is, as the other budgets leave it.

splitface, planar_sources and planar_regularize read the body's record in place
(Body::record) and a face's use from Body::face_forward; the two-lump test body
is Body::from_record of the two records side by side.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:18:13 -04:00
jyvikoandClaude Opus 5.5 333ab5f312 kernel: planar source lineage on the record, coplanar faces joined by SMLib
planar_sources reads each face's oriented plane from the body's record
(actual_planes: the surface's plane, turned with the face's use) instead of
truck faces; the lineage rules are unchanged. planar_regularize picks the edges
to remove as before (two faces of one shell on one certified plane, from one
source unless generated walls, off every split line) from the record's edge
uses, and SMLib joins the faces across them (Brep::merge_faces: each edge
removed where SmEdge::IsTopological finds the faces' surfaces coincide), so the
merged face is SMLib's and the history its own tags (Merged), composed through
the body's. SmBrep::Simplify is not this operation: it refits curves and
surfaces by knot removal and sampling.

The planar_sources tests read face points, edges and planes from the record;
the two-lump body is built from the two records side by side, each face given
the source of its own operand's face on that plane. Deleted:
planar_regularize's alternate_adjacency_path_cannot_remove_protected_internal_edge,
a test of the truck face builder merged_face (only listed edges are removed now,
so no other path can remove a protected one).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:18:13 -04:00
jyvikoandClaude Opus 5.5 fb6a1e8173 kernel: delete the coplanar, seam and flat-face boolean strategies
coplanar.rs (coincident faces pushed apart, faces glued back to back, bores and
insets joined, imprint unions), seam_faces.rs (round faces halved before a
retried boolean) and planar_faces.rs (flat B-spline faces made planes so the
coplanar strategies see them) existed to get round the mesh-based boolean's
coincident faces and seam loops. SMLib's boolean classifies coincident faces
itself (SmMerge::ManifoldBoolean, step 2), so these are retries and second
paths around the operation, not operations: deleted, not ported.

Their tests of what the boolean gives keep their volume, lump and validity
assertions and now run against the boolean itself (coplanar_tests.rs and
seam_faces_tests.rs need their own mod lines in lib.rs); the assertions on the
strategies used, and the tests of push_faces, grow_faces_exact, trim_exact,
planarized, coincident_planes and halved, go with them.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:18:13 -04:00
jyvikoandClaude Opus 5.5 4bd869c7be kernel: Split Face and Split Body on SMLib, the tool as exact record surface patches
A tool is now a set of schema 4 record surfaces, each over a parameter box,
unbounded where the tool is: a plane; a face's surface over its own box; a
sketch curve as one patch per segment swept along the direction (a line a plane
strip, an arc swept square to its sketch a cylinder strip, any other segment its
exact rational Bezier extruded), an open curve continued along its end tangents
past the body. SMLib cuts the faces where the patches meet them
(Brep::split_faces: its intersection curves trimmed to each face by
MergeCurvesOnSurface) and slices a body with one patch (Brep::split_body); the
history is SMLib's own tags. Nothing is traced on a mesh, sampled or fitted.

Which side of the tool a point is on is its offset along the normal of the
nearest patch, each patch's surface prepared once with its projection grid
(ToolSide), never per point. ToolSide::of and side_of_point take the body the
tool must reach past; face_side becomes face_sides (every face of a body, one
mesh); analytic_field becomes analytic_face (a face of a body, on its record);
split_any returns the face map instead of the truck imprint. split_edges_at and
fit (a Catmull-Rom fit through samples) are deleted with the truck code.
ssi::Surface::from_record turns a record surface over a box into SMLib's.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:18:13 -04:00
jyvikoandClaude Opus 5.5 99cb2e47c8 solidcraft-smlib: Brep::split_faces and Brep::split_body on the fork's split shims
split_faces cuts faces (SMLib face order) where ssi::Surface tools meet them and
says per face how many faces it became; split_body cuts a solid in two by a
surface, the part behind it and the part in front. SMLIB_REV moves to the fork
commit that adds smlib_split_faces and smlib_split_body.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:18:13 -04:00
jyvikoandClaude Opus 5.5 49f0313a1f kernel: a body's record may be a surface body of open shells
Surface operations make bodies whose faces lie in open shells; the record holds them as such.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:17:23 -04:00
jyvikoandClaude Opus 5.5 c2be0e12ac kernel: crate root follows the query-module port; SMLib at the fork's integration head
face_params and outline are gone (no callers on the record). The fork head adds the 2D planar
boolean (smlib_planar_faces, smlib_boolean2d), the grazing-curve crossing rule (solidcore#480) and
untrim's parameter-box status.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:51 -04:00
jyvikoandClaude Opus 5.5 6b686e7622 kernel: outline_union deleted, a retry of the old boolean with no caller left
It imprinted two bodies touching back to back on each other along the outline of their
contact and glued them, for the old boolean's coplanar unions that could not join the pieces
its own imprint left. SMLib's boolean is the one path, and nothing calls it any more. Its tests
of the union itself (a lip swept on a round rim joins it, the lip's foot is a plane) stay as
boolean tests, without the old retry diagnostics.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:45 -04:00
jyvikoandClaude Opus 5.5 bf1ff07dfc kernel: face_params deleted; a face's boundary in its parameters is the record's pcurves
Its sampled parameter loops (points projected back onto the surface, the outer loop guessed by
area) and its iso-curves of truck surfaces served Untrim and Extend, which no longer use them;
on the schema 4 record a face's loops in (u, v) are its exact pcurves, the outer loop the one
running counter-clockwise about the natural normal. The only use left is a truck test in
native.rs's seam fixtures.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:45 -04:00
jyvikoandClaude Opus 5.5 ed67773ac3 kernel: spline_conv makes record curves, surfaces and tensor sheets
geom's NURBS curves and surfaces become the record's rational splines, weights kept.
tensor_face builds a whole tensor surface as a one-face sheet (assemble's new Assembly::sheet:
one open shell in the infinite region): the net's first and last rows and columns as edges on
the surface's own knots, sharing the corners, each with its exact pcurve (an iso-line, the
edge's parameter being the surface's along it), and returns the body.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:45 -04:00
jyvikoandClaude Opus 5.5 9dd6b2208d kernel: plane_fit fits and certifies planes on the schema 4 record
plane_through gives a plane record (its natural normal turning with the loop); EdgeSampler
samples a record edge through CurveEval in the direction a loop runs along it (an intersection
curve traced as the record holds it, with the evaluator's own hint); planar_face certifies a
loop of record edges from their records (lines by their ends, circles and ellipses by their
frames, polylines and splines by their points with positive weights, intersection curves by a
plane among their surfaces) and returns the plane, the caller building the face on the record.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:45 -04:00
jyvikoandClaude Opus 5.5 c7dbdfa7f4 kernel: clearance reads each face's surface from the schema 4 record
A face's reach into a region comes from its record surface: planes (as offset::surf_of reads
them) lie in their triangles, a spline face's control net bounds it (its hull, read off the
record's points and positive weights), walls along the direction are prism::wall_along's, and
round faces keep their span and side. Truck's surfaces and the guard around them are gone.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:44 -04:00
jyvikoandClaude Opus 5.5 5f58cd9455 kernel: body distance projects onto the schema 4 record's faces and edges
The exact step of the distance between bodies works on the record: analytic faces in closed
form as before, other faces through SurfaceEval::project, edges by a bracketed golden-section
search of the record curve's own points from the nearest of evenly spaced ones (one method for
every curve kind, traced intersections included), the direction there from the curve's
derivative. Truck's point inversion is gone with it.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:44 -04:00
jyvikoandClaude Opus 5.5 cbbf8d510d kernel: surface_kind reads faces and edges off the schema 4 record
face_surface is the record face's analytic surface (offset::surf_of); edge_circle takes a
circle record's centre, axis and angle exactly (its parameter is the angle about the frame's
z), and for any other curve keeps the test that its points all lie on one circle (SMLib holds
its primitives' circles as rational splines). The spindle torus's signed major radius is gone
with the old kernel: the record's tori are ring tori.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:44 -04:00
jyvikoandClaude Opus 5.5 3415a11feb kernel: topo reads each face's surface from the schema 4 record
Seams and merged topology tell faces on one surface apart by the record's own surfaces
(offset::surf_of: plane, cylinder, sphere, cone, torus) and, for free-form faces, by the very
same surface record, never by fitting circles, spheres and cones to mesh vertices or by
comparing mesh normals along an edge. Edges are welded by their record vertices and middle
point, split lines and pinches read the record edge's points, a cone's apex is checked against
its faces' record vertices. The mesh still gives faces of no area and a cylinder face's extent
along its axis; a cylinder's side (hole or boss) is the record's.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:44 -04:00
jyvikoandClaude Opus 5.5 487ac87b89 kernel: planar region booleans are SMLib's exact 2D boolean
planar_regions_boolean replaced each free-form loop (a font's curves, an ellipse) with arcs
fitted within PLANAR_FIT_TOL before its own line/arc arrangement, and a loop the operation
cut kept those arcs: a cut free-form outline was extruded inexactly. Now each operand is a
sheet of planar faces built from its loops' own curves (Brep::planar_faces; lines, arcs and
the Béziers and conics as NURBS, exactly) and SM_API's 2D boolean combines them
(Brep::boolean2d): SMLib's topology intersector, the one the solid booleans use, splits the
operands' edges where they cross and the result's edges are copies of those curves. The
faces read back exactly (prism_curve::projected: lines, arcs, each Bézier span as the
segment it is). The Rust arrangement (crossings, ray parity, chaining, the fit and the
"exact again" restoration) is deleted: one source, no fitting.

extrude_planar_regions unites its regions the same way (balanced unions of one-region
sheets) and refuses pieces of the union that share a vertex, read off the result's
topology instead of a line/arc crossing test on fitted arcs.

Signatures stay (doc/sheet.rs and mesh_convert call them as before); `tolerance` is the gap
a loop may close within and the least tolerance edges are read back at. PLANAR_FIT_TOL
stays for doc/engine's flat patterns, which fit their own loops. smlib_sweeps::curve (the
Seg2 to SMLib curve conversion) is made pub(crate) for the sheets.

Tests: those of the deleted helpers (crossings, ray parity, closest_param, segment boxes)
are gone; the free-form test now asserts what the exact boolean gives (the half-ellipse
notch is the ellipse's own conics, area exact to 1e-6; the joined ellipses are conics), and
the fitted-arc budget assertion is dropped. Without the smlib feature the booleans are
refused ("not supported yet").

(not built: base in progress; cargo check shows no errors in prism.rs or smlib_sweeps.rs
with and without the smlib feature)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:38 -04:00
jyvikoandClaude Opus 5.5 ebbf487ce3 solidcraft-smlib: Brep::planar_faces and Brep::boolean2d
Wrappers of the fork's smlib_planar_faces (a sheet of planar faces from closed curve loops in
one plane, nested by SMLib) and smlib_boolean2d (two such sheets combined as regions of the
plane by SM_API's 2D boolean, the inputs' own curves split where they cross; an empty result
is None). SMLIB_REV moves to the fork commit that adds them (78617dd).

clippy -p solidcraft-smlib --features native --all-targets -D warnings: clean.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:38 -04:00
jyvikoandClaude Opus 5.5 217911d27c kernel: the general fill is the iso-parametric patch on three or four edges
The general fill (G1/G2 patches, patches through points, loops that bound no height
field) is solidcraft_geom::fill_iso's patch on the loop's own edges: each line or spline
edge, on its interval and run the loop's way, is a side, so its pcurve is a straight line
in (u, v), exact. The frames across a G1/G2 edge are read off the one face beside it in
the record: its outward normal, the way it leaves the edge, and for G2 its normal
curvature from the surface's exact second derivatives. Corners whose neighbours' tangent
planes disagree are exempt from the angle tolerance. Loops of five or more edges, and
conic, rational or traced edges, are refused by name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:29 -04:00
jyvikoandClaude Opus 5.5 2b6c761dd4 geom: fill_iso, a patch on three or four exact curves whose boundary rows are the curves
The loop's edges become the sides of the unit square (three sides: the fourth collapses
to the first corner, a pole), each mapped affinely onto [0, 1]. Opposite sides are made
compatible exactly (split into Bezier pieces at every break, raised to the higher degree,
rejoined), the bilinearly blended Coons patch is the start, and with the boundary rows
held the interior control points solve the G1/G2 rows, the points to pass through and a
vanishing multiple of the thin-plate energy by least squares, refined by halving spans.
Every edge lies on the patch exactly and its pcurve is a straight line in (u, v), affine
in the edge's own parameter: no pcurve is fitted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:16:29 -04:00