Commit Graph
1911 Commits
Author SHA1 Message Date
Brennen HerbruckandClaude Sonnet 5.5 8a04a07bb1 kernel-cases: threads cases from modelled-thread reports (2 of 2), skipped sources
The rest of the thread cases (holes at the nominal size, shafts and holes
off the thread's size, the crash and sketch-attachment repros) and the
triage of the sources that are not kernel geometry.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:17:48 -04:00
Brennen HerbruckandClaude Sonnet 5.5 e6f435aec2 kernel-cases: threads cases from modelled-thread reports (1 of 2)
External and internal modelled threads, tapped holes and threads beside
other features, each graded against the ISO 68-1 groove volume (Pappus)
and the part's own closed-form volume.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:17:48 -04:00
jyvikoandClaude Opus 5.5 e44426f731 kernel: spline edges on part of their curve load as that piece
SMLib bounds an intersection edge on a piece of its spline (seed 32 intersect:
a block and a cylinder, the top disc's edges), and the truck decode refused
such an edge ("not supported yet: a spline or intersection edge on part of its
curve"), since truck bounds an edge by its curve's whole range.

bspline::segment cuts a B-spline to a sub-interval of its domain exactly:
Boehm insertion of both ends until each has multiplicity p, then the knots and
control points between them, clamped on the interval. The same points at the
same parameters, so the edge keeps its interval and the record its numbers.
load_edge_curve loads a spline or rational spline edge on part of its curve as
that piece; an intersection edge on part of its curve is still refused. Our
own records (interval = the curve's range) load as before.

Tests: segments of a rational cubic with a double knot, inside a span, across
knots, from or to a domain end, match the whole curve within 1e-12; both
spline kinds load on a piece with that range and the same points, and beyond
the domain are refused; SMLib's block ∩ cylinder decodes (it was refused) with
π r² h within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 06:12:46 -04:00
jyvikoandClaude Opus 5.5 c99f88fb67 brep: a revolution of a closed profile is periodic along it
The adapter loads an analytic torus as truck's revolution of the whole profile
circle, a rational quadratic closed on itself, so an SMLib torus is one face
bounded by its two seam circles, each used both ways. The display evaluator's
domain gave a revolution a period around its axis only: projected along the
profile the loop jumped from one end of the knot interval to the other at its
start vertex, the plan failed ("boundary crosses itself") and the body fell
back to truck's mesher, which meshes a sphere bounded by its seam alone as
nothing (seed 60 union, a torus beside a sphere: 925.0 of 990.7 mm³).

tess::uv::closed_curve detects a closed profile the way closed does a closed
spline surface (clamped knots, first and last control point and weight the
same within 1e-9 of the polygon's extent; the shared checks are factored out),
the domain then has period = the profile's knot interval along it, and
EvalSurface::wrap/derivs wrap that parameter back into the interval, so the
plan's projection, unwrapping and both evaluators treat it as periodic. A
cylinder's or cone's line profile is unchanged.

Tests: a revolved whole circle, either parameter order, has both periods and
evaluates a period away as inside; SMLib's torus, alone and beside a sphere,
decodes without meshing to orient it, plans every face and measures within
1e-3 of 2π²Rr² (+ 4/3 πr³). With the closed profile undone the torus plan
fails as above.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 06:12:46 -04:00
jyvikoandClaude Opus 5.5 c668c717e3 kernel: SMLib spheres cut by a boolean decode oriented and meshed
Results of SMLib booleans on its own spheres came back wrong through
body_from_smlib (side-by-side runner: seed 13 cut −1611.9, seed 61 cut −252.4
against SMLib's 4056.9, seeds 46/61 union 80 % short). The schema 4 records were
right (check_geometry passes, outer loops counter-clockwise, shells out of the
material); three things on the truck side were not:

- Body::new orients a solid by the volume of truck's coarse mesh, and truck's
  mesher meshes a sphere bounded by its seam alone as nothing: the rest of the
  body set the sign and turned it inside out. A foreign record is oriented by
  its shells, so body_from_smlib now builds the body with Body::oriented
  (revolved faces turned as before, orientation kept, nothing meshed).
- rephase_revolved turns each revolved face so it sits around angle π. A face
  that uses its seam both ways goes all the way round; turning its surface ran
  the wrap through the face's hole, the display plan failed and the sphere
  meshed as nothing. Such faces now keep their wrap on their seam (truck's own
  primitives have none: their round faces are split).
- The display plan opened only a loop of one seam used both ways. A sphere face
  whose meridian a trim splits uses each piece both ways, turning back at each
  pole, and projected onto one parameter line ("boundary crosses itself"), so
  the whole body fell back to truck's mesher and lost its sphere faces. A loop
  through both poles that turns straight back at one now has its run between
  the poles moved one period along, whichever way keeps it within one period
  with a positive area (poles split as the planner splits them); the routing
  check finds such loops too.

Test: SMLib's sphere less a box cap beside its seam, across it (seam split) and
a bar bored into its side away from the seam decode without meshing to orient,
oriented as recorded, every face meshed, within 1e-3 of the exact volume.
Before, the decode meshed the body to orient it; with only the plan's pole
handling undone the −x cap measures 50.3 of 469.1 mm³, with only the
rephase undone the bored ball 252.4 of 4059.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 06:12:46 -04:00
Brennen HerbruckandClaude Sonnet 5.5 28c001c35b kernel-cases: fillets skipped sources (287)
Every other fillet, chamfer and blend issue and PR, one line each: auto-filed reports from private designs (picks and error only), sketch fillets and chamfers, UI, previews and navigation, feature and fit-option requests, reference cases that already exist in tests/oracle, surface modelling, and failures that belong to booleans, shell, import, tessellation, sheet-metal or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:11:03 -04:00
Brennen HerbruckandClaude Sonnet 5.5 2fb88ceedc kernel-cases: fillets correct the union volume quoted in 1262
The graded volume was right; the derivation text quoted the union as 46476.5 instead of 45571.7.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:11:03 -04:00
Brennen HerbruckandClaude Sonnet 5.5 91b665cf02 kernel-cases: fillets pattern and G2 cases from #193, #219, #862, #1488, #2341, #2708, #2811
Copies of filleted and chamfered features (a pasted block, a pattern of pockets with corner rounds, a pattern of chamfered bosses), a grille of rib roots, a join that needs a boolean retry followed by a fillet, and curvature-continuous fillets worked out from the documented quintic section.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5d5dc0e720 kernel-cases: fillets outline and corner cases from #237, #334, #485, #556, #851, #1207, #1213, #1262, #1557, #1667, #2498
Rounds along curved outlines, with the removed volume worked out by Pappus or by integration: merged cylinders, a D prism, a rounded rectangle with 0.02 mm end edges, a long box beside quarter turns, vertical corners after bottom rounds, a bent tube end, a boss's bottom arc, bars running into a boss, an edge ending on a curved wall, and the knife-edge arc corner.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
Brennen HerbruckandClaude Sonnet 5.5 23b7d481b1 kernel-cases: fillets refusal, fit and straight-edge cases from #190, #199, #324, #896, #1668, #2752, #2852, #3369, #3435, #4141, #4143
Rounds with their own right answers: a radius larger than the ring it runs along (refused), a pick on a smooth seam (refused), a far edge pick (refused), a round that uses up an end face or a wall, a round over a hole, rounds on both sides of a thin wall and concentric with an inner one, a round on a sphere's flat cut, an edge ending on a tangent seam, and rims on B-spline ramps.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
Brennen HerbruckandClaude Sonnet 5.5 d55565e76f kernel-cases: fillets chamfer cases from #814, #1080, #1390, #1986, #2672, #2719, #2797, #2907, #3655, #3779, #3868, #4055, #4101
Chamfers on boxes, plates, discs and sectors with closed-form volumes: all twelve edges in the order that was refused, a concave chamfer that adds material, a chamfer next to square openings and one that runs into them, a hole rim tangent to the bottom face, a hex hole's corner bevels, a one-pick chain on a large part, a bottom loop as wide as the corner round, two distances on a circular rim, the end outlines of a rounded prism, a chamfer over a joined pin, and the equal chamfer of a slanted plug. Spline-sided pillar (invariants only) for chamfer and fillet.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 06:08:51 -04:00
bherbruckandClaude Opus 5.5 0a054bcbdb kernel-cases: booleans from #3404-#4124 (28 cases, 76 skipped)
Cases: mirror of a cut under a wall (#4011), coplanar intersect (#3671), multi-lump
intersect (#3526), split along a face plane (#3447), 64-peg join (#3455), boss on a rod
(#3485), collinear cylinders and pin in a bore (#3497), swept G2 cut (#3604), spokes
tangent to a hub (#3612), sphere and pyramid (#3633), column in a channel (#3665),
extrude to a point on an edge (#3729), emboss on a cylinder (#3782), circle-only join
(#3841), ring on a perforated plate (#3887), symmetric revolve cut (#4008), walls round a
floor (#4058), slab beside a bore (#4095), and others. The rest are skipped with a reason
in skipped-c.json.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:57:05 -04:00
Brennen HerbruckandClaude Sonnet 5.5 e80dbde005 kernel-cases: sheet-metal skipped sources (87)
Every other sheet-metal-keyword issue and PR, one line each: UI, docs, file
format, naming and attachments, DXF output, feature requests, user designs
with no repro, and failures that belong to booleans, fillets, shell, sweeps
or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 33a52ff053 kernel-cases: sheet-metal tray and unfold cases from #349, #405, #436, #514, #723, #1797, #3417
Trays at 72 degrees and with four angles and heights, a tray shrunk by a
parameter and unfolded, an L bracket unfolded and refolded, opposite flanges
at 105 and 120 degrees, torn corners folded, and a rhombus whose square
reliefs would overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 76fede4276 kernel-cases: sheet-metal convert and unfolded tray cases from #479, #488, #723, #725, #839, #1092, #1285, #1481
Unfolded trays graded by the flat size W + 2(H - BD): torn, round and square
relieved corners, per-feature reliefs, rounded plate corners; a shelled tray
and a bracket converted at their bends; an L converted to the rule's radius.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 cce2c57b0b kernel-cases: sheet-metal flange and cut-out cases from #416, #529, #570, #601, #634, #659, #702, #978
A flange beside the leg of an L, along what a cut-out leaves of an edge,
beside a ledge as tall as its setback, a return on a flange's far edge, a
round hole, a slanted slot and an ellipse across a bend, a hundred slots with
four folds, and the refusal of rule values sheet.flange would ignore.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 7f9345608d kernel-cases: sheet-metal cut-out, flange and refusal cases from #296, #1095, #1280, #1295, #1311, #1979, #3078, #3234, #3324, #3353
Cut-outs folded and refolded, a hole square to a 45 degree flange, a slot
that parts a flange from its base, an inside flange on a plate turned
62 degrees, cuts after cuts, a hole beside two adjacent flanges and a flange
on a flange's side edge; refusals for a flange on a bend line and a flat
pattern after a fillet; a mirrored sheet body that must stay sheet metal.
Volumes by hand (K = 0.5 folds: flat area * t; otherwise bend volumes).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5140736d1e kernel-cases: sheet-metal convert and hole cases from #774, #1040, #1092, #3316, #541, #542, #560, #955
Plates converted to sheet metal (holes, long thin strips, engraving, a
channel with modelled bends, position kept) and holes and cut-outs
through or into a sheet; volumes by hand from the plate and the holes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
Brennen HerbruckandClaude Sonnet 5.5 30796b2646 kernel-cases: sheet-metal fold cases from #262, #264, #638, #639, #685
Folds of tabs and plates, graded by closed form: a fold keeps the blank's
flat length, so V = flat area * t + theta * w * t^2 * (1/2 - K). Tabs
on one line (#264, #638), a tab on an L's inside edge (#639), a fold just
inside a tab root and a refusal at the root (#262), a fixed point on the
top face of a large plate (#685).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:54:30 -04:00
bherbruckandClaude Opus 5.5 9029c693f3 kernel-cases: booleans from #2896-#3383 (11 cases) and the skipped list
Cases for the near-contact gap join, a countersunk hole beside a distant
body, a perforated plate under a ring, a sealed void, a rim and tooth join,
a frustum cut, a line-to-line pin, a flush notch, spoke patterns and a join
into a rotated occurrence. The rest of the bundle is in skipped-b.json with
one line each.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:50:12 -04:00
bherbruckandClaude Opus 5.5 dfc6328ca7 kernel-cases: booleans from #2564-#2896 (11 cases)
Hand-derived cases for tapered and collinear extrudes, pattern and mirror
copies keeping their targets, a cut up to a face, a prism joined to a
round-cornered slab, a clip round a small hole, and near-contact joins.

2564, 2583, 2601, 2754, 2755 (pattern, mirror), 2801, 2810, 2826, 2580,
2896 (overlap)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:50:12 -04:00
bherbruckandClaude Opus 5.5 9824189915 kernel-cases: booleans from #13-#2534, first half (30 cases, 73 skipped)
Spheres cut twice (#1717), box/cylinder intersect (#1647), crossing cylinders
moved far (#1649), coaxial cut from a thin disc (#500), coincident cylinder
walls (#114, #2008, #1910, #1865), rim touching a coin (#168), holes along
walls and beside rounds (#559, #562, #1279, #1355, #2055), tangent holes
(#307), blind cut in a cylinder (#308), through-all cut (#423), shallow cuts
(#1858), skin left by a short cut (#1730), delete face (#1927), collinear
extrude sides (#1949), hidden bodies (#2464), mirror and patterns (#2003,
#2524, #2076), tapered extrudes (#831), text cut (#1195), split (#13).
Every other item in the bundle is in skipped-a.json with its reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:49:10 -04:00
Brennen HerbruckandClaude Sonnet 5.5 71841d3d5d kernel-cases: tessellation skipped sources (253)
Every other tessellation-keyword issue and PR, with one line each:
rendering and GPU drawing, UI, performance, display-plan plumbing, and
failures that belong to booleans, fillets, threads, import, shell,
sheet metal or crashes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:48:32 -04:00
Brennen HerbruckandClaude Sonnet 5.5 57b72b5334 kernel-cases: tessellation cases from #311-#2712 (14 cases)
311 ramp cut across a round blank, 784/811 filleted and drilled bodies
for STL export, 818 blind hole in a filleted ring, 819/921 pocket that
splits a wall seam, 1263 concave arc with a knife-edge tip, 1615/1653
crossed lofted tubes, 1648/1850 sphere touching a box edge, 1666/1670
two twisted lofts, 1753 bowl rim cut by a cylinder, 1813/2712 lens face
thinner than the tolerance, 2069 notched ring moved far away, 2528
slot joined with an overlapping cylinder.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 05:48:32 -04:00
bherbruckandClaude Opus 5.5 871b7cea11 kernel-cases: crashes and hangs from the #140-#4149 reports (9 cases, 45 skipped)
140 join with a pad hanging past the edge, 1219 bore fillet then grooves,
1985/2243 STEP export of two enclosures, 3540 cut with a coincident cylinder
face, 3685/1559 delete a fillet face, 4092 loft + ribs + pad union (two
recipes), 2992 disk and 36 twisted loft blades. Everything else is skipped
with a reason (private designs, other areas, UI, perf only).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:47:59 -04:00
bherbruckandClaude Opus 5.5 eb61abb3f3 kernel-cases: import from #1721-#4006 (19 cases, 59 skipped)
STEP: 3730 void shell flag, 3098 tiny-knot B-spline edges, 2043 opposing
surface sense, 3208 extruded ellipse over its seam, 3352 vertex off its
curve, 3963 closed spline edge, 4005/4006 near-degenerate cones, 3871
cone point, 3880 seam cylinder and dome, 1721 closed B-spline tube.
IGES: 3806 revolved arc cap, 3845 trim gaps, 3359/3913 reversed trim
pieces, 3886 tiny knot span, 3912 reversed hole trim, 3972 two boxes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:43:31 -04:00
bherbruckandClaude Opus 5.5 c97887e604 kernel-cases: shell and offset from #12-#4144 (21 cases, 59 skipped)
4009 closed shell, 4010 shell open at a hole wall, 2531 point pick after an edit,
3468/3898 offset next to a fillet, 12 split face piece, 566 swept bar, 745/3893
freeform boss (two variants), 3103 tapered cylinder, 3669/2990 loft, 3283/3650
and 2939 curved offsets, 3506 and 1972 split then shell, 3576, 391, 1494, 1525.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:42:46 -04:00
bherbruckandClaude Opus 5.5 f932aec784 kernel-cases: the no-keyword kernel items, #25-#4148 (4 cases, 98 skipped)
Cases: #3702 (a board in the cavity of a case with a filleted rim, cut leaves the case
unchanged) and #258 (STEP cone to a point, with and without an apex vertex, and the 0.5 mm
pin). Everything else in the bundle is skipped with a reason in skipped-other.json.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:40:18 -04:00
bherbruckandClaude Opus 5.5 6a03284ea9 kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
  `cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
  `default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
  run on a build without the switch reports "not supported yet" instead of grading the default
  kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:31:54 -04:00
Brennen HerbruckandClaude Opus 5.5 568e2627c0 kernel: boolean runner grades the seeds against a reference volume
Rows without an analytic volume (the fuzz seeds) get one from the
primitives' definitions, by no kernel: along each vertical line both
operands are exact z intervals, combined exactly, integrated over a grid
whose cell edges include every straight face, with the half-resolution
grid bounding what error is left. Each kernel's volume is graded against
it (within 1e-3 relative or 3x that bound), in the JSON per row and in the
report's summary.

On 64 seeds truck is right on all 192 rows. SMLib's own measure is wrong on
13, all with cylinders or spheres, although truck's measure of the same
exported bodies is right on every one of them; 5 give no closed solid.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:24:01 -04:00
bherbruckandClaude Opus 5.5 57bc3c5623 kernel-cases: a regression rig that grades each kernel against the case's own answer
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.

- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
  (succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
  record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
  volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
  not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
  or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
  and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.

tests/kernel-cases/README.md gives the format.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:23:13 -04:00
jyvikoandClaude Opus 5.5 8665746eab kernel: boolean runner measures SMLib's results again on truck
When SMLib's volume of a boolean result differs from truck's, the report could
not tell a wrong body from a wrong SMLib measure. The runner now measures the
result it exports back to truck as well, keeps that volume in the JSON, and
shows it in the export column wherever it leaves SMLib's own measure or SMLib
could not measure the body at all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 05:14:20 -04:00
jyvikoandClaude Opus 5.5 3002a80e34 kernel: boolean runner times both kernels and runs the cut sequence
The side-by-side runner now reports how long each boolean takes on truck and
on SMLib (the call alone), and apart from that the SMLib side's conversions:
the operands' truck→SMLib import and the result's SMLib→truck export, which
the app pays while truck still holds the bodies. The report gains a times
summary (median, worst, total), solid counts, the analytic volume of each named
case's union, intersection and cut, and how many results land on it.

It also runs the "each cut gets slower" case from TASK_kernel-smlib-booleans as
a named sequence: a 63.6 × 31.7 × 9.5 block, a Ø20 × 10 boss joined on top, a
slot front to back, a Ø6 cross hole through the boss and a slot that splits
the block, each step on the previous result. SMLib keeps its own results from
step to step (only the tools come from truck), in a child process like the
cases, and every step's volume is checked against its closed form.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 05:04:10 -04:00
jyvikoandClaude Opus 5.5 1a2c21e06c kernel: side-by-side boolean runner calls SMLib's boolean
The smlib_booleans example answered "not supported yet" for every SMLib case.
Now it runs solidcraft_smlib::Brep::boolean on the tagged operands (cut maps
to Subtract, None is an empty result), reads the result's history from the
tags, and measures its volume with mass_properties at MEASURE_ACCURACY, so the
report compares truck and SMLib on real results.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 04:59:26 -04:00
jyvikoandClaude Opus 5.5 0eacff3ee4 brep: orientation, not position, tells a face's outer loop
truck lists some planar faces' hole loops before the outer loop, so the
rule that loops[0] is the outer loop never held for truck's records; moving
it in the adapter would renumber those faces' edges, which history and
names stand on. The outer loop is the one that runs counter-clockwise about
the natural normal (what check_geometry checks); the order is the
producer's, and SMLib's import puts the outer loop first, as SMLib needs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:58:14 -04:00
jyvikoandClaude Opus 5.5 bff2379abc brep: check_geometry refuses loops that enclose no area or turn the wrong way
check_geometry compared pcurve ends with edge points only, so a loop whose
pcurves enclose nothing passed whenever its uses lift onto the same 3D points:
SMLib's hole-rim fillet with both seam uses on u = 0, or a whole sphere whose
pole-to-pole seam has both uses on one line (the continuity check skips the
pole). Such a face has no surface and meshes to nothing.

Each edge loop's signed (u, v) area is now taken over 16 points of each use's
pcurve: a loop within 1e-9 of the square of its extent of zero is refused
(Problem::Empty), and each face must have exactly one counter-clockwise loop
about the natural normal, the rest clockwise (Problem::Turn). Outer and inner
are told apart by area rather than position, because the truck adapter writes a
face's wires in truck's order, which puts a hole first on some planar faces of
the sample designs (the model cache test caught it).

Fixtures: the pole-to-pole seam on one line, and a sheet whose plane axes are
swapped so its loop runs clockwise; a seamed sphere passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:55:17 -04:00
jyvikoandClaude Opus 5.5 fa68b66c56 brep: splines closed on themselves are periodic for pcurves and tessellation
A spline surface whose first and last control rows coincide in a direction
(points and weights, knots clamped there) closes on itself, but the display
evaluator's domain gave NURBS no period. The pcurve routine therefore never
moved a seam's second use by a period: SMLib's fillet round a hole's rim (a
rational spline closed in u) got both seam pcurves on u = 0, its outer loop
enclosed no (u, v) area, the decoded face tessellated to nothing and the body
measured 6839.73 mm3 against SMLib's 6989.00.

tess::uv::closed detects the closure from the record, within 1e-9 of the
control net's extent; the domain then has period = the active knot interval's
width, and the evaluator wraps a parameter outside that interval back inside
it, so pcurves, projection, sizing and the display plan all treat the direction
as periodic. The record stays as it is. The display plan hands both evaluators
wrapped parameters (the GPU does not wrap).

Tests: a rational torus band, a NURBS cylinder and a NURBS dome with a pole,
each bounded by a seam used twice, get seam pcurves one period apart; a record
of the band passes check_geometry and its seam uses on one line are refused;
SMLib's hole-rim fillet decodes with every face meshed and SMLib's volume
within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:52:36 -04:00
jyvikoandClaude Opus 5.5 4067ab4c9b solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib
Brep::boolean (union, subtract, intersect; Ok(None) for an empty result), Brep::solid_count,
Brep::fillet, Brep::chamfer and Brep::shell, over the fork's smlib_ops.cpp shims (ffi/ops.rs).
Edges and faces are chosen by points, each the nearest within a tolerance; a point that
selects nothing or cannot decide is Error::NoMatch / Error::Ambiguous with its index, and a
solid input that gives anything but a closed solid is Error::NotSolid. Fillets and chamfers
take whole tangent chains; a chamfer distance is the setback along each face; a shell's
thickness is negative inward.

The C API with these shims is version 2 (the fork's capi-flat line), so ABI_VERSION is 2.

Tests (ops_tests.rs) against analytic volumes and counts, SMLib's own check at every level on
each result, and history through a tagged box minus box: union 9000 mm3 [11, 24, 16]; slot
6000 [10, 24, 16]; intersection 1000; empty results; a split body (2 solids); a cube with all
12 edges rounded r = 2 against the Minkowski formula; one chamfer (7910, [7, 15, 10]); shells
open at the top inward (3392), outward (4672) and closed; a tangent chain from one pick equal
to picking all three edges; hostile sizes, tolerances, points and counts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:16:29 -04:00
jyvikoandClaude Opus 5.5 f2f2f2d267 solidcraft-smlib: rebuild SMLib when its own sources change
build.rs asked Cargo to rerun only when capi/ changed, so a fix in the fork's source/ (SMLib
or SM_API) left the old objects linked: the tests kept crashing on a kernel bug already fixed
on disk. It now watches source/ too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:13:47 -04:00
Brennen HerbruckandClaude Opus 5.5 86f9842088 kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
The hyperbola and parabola cone pieces and the revolved cylinder, read by solidcraft-step into
schema 4 and built back into truck bodies, keep their closed-form volumes with their faces
pointing out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 02:10:25 -04:00
Brennen HerbruckandClaude Opus 5.5 24a17899d3 solidcraft-step: surfaces of revolution and extrusion, offset surfaces, hyperbola and parabola edges
SURFACE_OF_REVOLUTION reads as a placed revolution (u the angle, v the profile's parameter,
STEP's normal); SURFACE_OF_LINEAR_EXTRUSION as an exact spline surface, the profile as a
(rational) B-spline times degree 1 along the vector; a circle extruded along its axis or
revolved in a plane through the axis as the cylinder or ring torus it is. Line, conic and
open-conic profiles are bounded by the face (a closed conic's seam outside it, a revolved
profile stopped at the axis). OFFSET_SURFACE of the analytic kinds reads as the moved
surface, checked at each level. Hyperbola and parabola edges read as exact rational
quadratic pieces and a Bezier on STEP's parameter. Faces winding around a revolution get
seams along its profile. Every mapping is checked point by point and normal by normal
against STEP's own surface.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 02:10:25 -04:00
jyvikoandClaude Opus 5.5 9823cf46c7 brep: a budget of 4,000,000 items, pcurves included
Schema 4 counts every pcurve's control points as items, which schema 3 had
none of, so a body that fitted the old 1,000,000 no longer does (a STEP
plate of 50k faces). The binary envelope's own caps on bytes, values and
entries per collection still bound a body.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 01:55:38 -04:00
Brennen HerbruckandClaude Opus 5.5 5a4a6f3fdf solidcraft-step: refuse loops across a closed spline surface's seam; conformance parts and truck volumes
A face winding around a closed (non-periodic) spline surface without a seam edge has loops
that jump across the surface's domain; it is refused for now instead of making a record whose
loops do not close. The step-conformance parts are read in a test, and the kernel's ignored
corpus comparison builds each record back into a truck solid to compare volumes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:51:54 -04:00
Brennen HerbruckandClaude Opus 5.5 e66ee38f15 solidcraft-step: seams for STEP faces that wind around their surface, looser pcurve fits
A face on a cylinder, cone or sphere bounded by loops that go round the axis (a band
between two circles, a dome on its equator, a cone on its base and apex) gets a seam:
a ruling or meridian from one loop to the other (split where it has no vertex at that
angle) or to the pole it covers, so every loop closes in (u, v) as schema 4 requires.
Pcurves may be fitted up to 1 mm off for edges that lie off their surfaces. The kernel
gets an ignored corpus test comparing truck's face and edge counts with schema 4's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:51:54 -04:00
Brennen HerbruckandClaude Opus 5.5 eaa247d88a solidcraft-step: STEP topology into schema 4 B-rep records
read_solids walks MANIFOLD_SOLID_BREP, BREP_WITH_VOIDS and SHELL_BASED_SURFACE_MODEL
into solidcraft_geom::brep records: lines, conics, B-splines and polylines; planes, the
analytic surfaces and B-spline surfaces; edge intervals from the vertices' parameters;
loops relative to the surface's natural normal; outer loops, regions, voids and sheets;
pcurves from the 3D edges; the canonical order. Unsupported geometry refuses its solid
with a reason and the rest of the file is still read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:51:54 -04:00
Brennen HerbruckandClaude Opus 5.5 3914ea60f5 solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:51:54 -04:00
Brennen HerbruckandClaude Opus 5.5 4e96737413 kernel: the boolean runner builds every SMLib operand
Boxes and cylinders go into SMLib as truck's own B-reps, through their
schema 4 records (smlib_body), so both kernels start from the same input
whatever the axis. Spheres and tori are SMLib's primitives about +Z, like
truck's, since the import doesn't take truck's revolved surfaces yet. All
41 cases' operands now build; only the boolean itself waits for its shim.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:51:15 -04:00
bherbruckandClaude Opus 5.5 08e3620c1a solidcraft-smlib: mass properties of every primitive against closed forms
Cylinders (also against oracle 02 and 38's expected.json), spheres, cones, frustums and tori,
at the origin and 2e5 mm out: area, volume, centroid, moments and products within 1e-6.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:48:17 -04:00
bherbruckandClaude Opus 5.5 fb8e9d1bf9 solidcraft-smlib: check test on every primitive
Cylinder, sphere, frustum, cone and torus pass SMLib's check at every level.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 01:46:14 -04:00
jyvikoandClaude Opus 5.5 1522e1332d solidcraft-smlib: SMLib bodies into SolidCraft through schema 4
SMLib B-reps leave the C API as its flat arrays, read through the crate's
one flat wrapper (crate::flat::Flat, copied out as import::Arrays), and
become schema 4 records: shell pairs merged, sheets collapsed, radial cycles
normalised, analytic surfaces as their kinds (narrowing cones kept), loops
reversed where SMLib's surface is inside out, every pcurve from
brep::pcurve, canonical order, then validate() and check_geometry(). Edges
arrive as their own kinds; NURBS edges that are lines or circular arcs (the
primitives' circles) are recognised as a fallback and counted. With the
kernel's `smlib` feature, body_from_smlib() decodes them into a Body.

Adds the cylinder, sphere, cone and torus primitives. Each primitive passes
SMLib's own check at every level, its volume from the exact mass properties
matches the closed form, and it goes round SMLib -> schema 4 -> SMLib with
its counts, volume and a clean check. Truck now meshes a whole sphere
bounded only by its seam (SMLib's sphere) through the display plan.

SMLIB_REV moves to the fork's capi-primitives (the primitives on capi-flat
40bb855).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 01:38:16 -04:00