Commit Graph
2299 Commits
Author SHA1 Message Date
e6dc105134 Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) (#5381)
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)

A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.

- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
  type, optional colours, other elements skipped; counts checked against the
  file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
  faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
  colours, units, rigid placement, size and colour), stored as a binary
  container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
  a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
  card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
  viewport fallback; messages in en, en-GB, ja, zh, de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: colour by the file, one colour or height, from the UI (#5151)

The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.

Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: integrate format registration and viewport caches (#5151)

* Point clouds: satisfy current UI audits and document comparisons (#5151)

Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.

* Point clouds: isolate translations for current main (#5151)

Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.

* Point clouds: fit the rebased code to main's GpuTarget and Frame

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare point clouds when reusing placement-independent results

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: complete command help and required translations (#5151)

* Point clouds: size the save cap from the raised limit after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 21:17:02 +00:00
866029aaa2 Engine: one sketch store for the sketch commands (W38.0, #5425) (#6336)
* Engine: one sketch store for the sketch commands (W38.0, #5425, no behaviour change)

The sketch commands found and kept the sketch they work on in about forty places, each its own
way. They now go through one module, cmd::sketch_store, so a drawing session (W38a/b) can put
sheet and view sketches behind the same calls without the commands changing again.

- target: the command's `sketch` param or the sketch being edited (target_sketch, moved).
- active: the sketch being edited, if any. The thirteen commands that need one keep their own
  refusal text; unifying the three texts is a separate, visible change.
- read and write: the only calls from the sketch commands to Document::sketch and sketch_mut.
- update: change a sketch on a copy of the document and keep both, the edit the text and link
  commands made by hand (sketch.text, sketch.edit_text, the projection, intersection and
  include links, sketch.fit_curves_to_section, sketch.break_link). As before, those paths
  neither solve the sketch nor run its checks.
- checked: the checks an edited sketch passes (the periodic splines), shared by edit_solved and
  sketch.offset.break.

edit and edit_solved stay in sketch.rs and load and keep their sketch through read and write.
Imported text, snap points and the face projections keep their own shape (a text that can't be
linked is skipped, snap points copy the document only when one is needed) through read and
write. The reads and writes that are about the design's own sketches stay as they are, each on
a line marked `// design-only:` (Redefine Sketch Plane, a joint's curve, a motion trace's wire,
and the session's live drag, parameter edits and `created` diff).

A source scan, each_sketch_command_goes_through_the_store, fails when a command reads or writes
a sketch, or asks for the active one, anywhere but the store or a marked design-only line in the
files that work on the design's sketches. Every existing sketch test is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: the sketch store's scan also catches the active sketch taken as a value (#5425, review of #6336)

The scan only caught `active_sketch.ok_or`, so main's `let Some(id) = s.active_sketch else …`
could have come back unseen (0xlillith's review). It now also flags the value-read forms:
`) = s.active_sketch` (let-else and if let), `=> s.active_sketch` (a match arm),
`s.active_sketch.and_then(` and `s.active_sketch.map(`. State checks (`is_some`, `is_none`,
`== Some(`), assignments and snapshot copies stay allowed.

The wider scan found five commands that hand-rolled the store's `target` rule (a `sketch` param or
the sketch being edited). They now call `sketch_store::target`: sketch.inspect, sketch.glyphs,
sketch.export_dxf, inspect.curvature_comb and inspect.minimum_radius (their `curves` form).
Their refusals become target's:
- no `sketch` and none being edited: "no sketch is being edited" (was "no such sketch (and none
  is active)", or "no such sketch" for sketch.glyphs);
- an unknown name or id: "no sketch `X`" (an unknown id used to reach "that sketch is not
  evaluated");
- a feature that is not a sketch: "`X` is not a sketch";
- a `sketch` that is neither an id nor a name (true, a list, an object): refused,
  where it used to fall back to the sketch being edited. A null `sketch` still means none given
  (the scenario harness sends one): target now reads it that way for every sketch command
  (target_reads_a_null_sketch_as_none_given).
No test, doc or schema text named the old wording; the params docs ("sketch?: id|name (default
active)") still hold.

The two remaining value reads, the default sketch for a feature (features.rs) and the sketch a
measurement prefers (measure_sel.rs), go through `sketch_store::active`, with no change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: a number in `sketch` is an exact sketch id, never a name (#5425, review of #6336)

`sketch_store::target` turned a JSON number into text and looked it up with
`Document::find_feature`, which falls back to a name when no feature has that id. So
`{"sketch": 999999}` could pick a sketch named "999999" whose id is something else, and export
or inspect it. sketch.export_dxf, sketch.glyphs and the two curvature inspects read an exact id
before they moved onto the store; the other sketch commands (the old `target_sketch`) and
sketch.inspect read a number as text.

One rule now, for every command that takes `sketch`: a number is an exact id (`as_u64`, then
the feature with that id); text is an id written out or a name, as before. A number that isn't
a whole number of 0 or more (negative, fractional) is refused with "`sketch` must be an id or a
name"; an id no feature has gives "no sketch `N`", as before. Nothing in the tests, docs,
scenarios or examples names a sketch with digits, so nothing relied on the old fallback.

Test (sketch_store): a sketch named "999999" with another id. sketch.export_dxf, sketch.glyphs
(with another sketch being edited, for its enabled check), inspect.curvature_comb and
inspect.minimum_radius (with a real curve id) refuse `{"sketch": 999999}`, find the sketch as
`"999999"` and by its own id, and refuse -1 and 1.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: MidPoint finds its sketch through the store too (#5425, after #5011)

#5011 added a caller of the old `target_sketch` (MidPoint's `line_stays`, which swaps a point
picked after its line) after this branch's base. It now reads the sketch through
`sketch_store::target` and `sketch_store::read`, as the other sketch commands do, so a number
there is an exact id too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: standard parts fix their sketch's entities through the store (#5425, after #6376)

#6376 (a standard part's sketches are fully defined) reads the sketch being drawn straight from
the document's features, after this branch's base. `fix_all` now takes it from
`sketch_store::active` and `sketch_store::read`, as the store's scan requires, with the same
result.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: Toggle Diameter and Delete on a profile find their sketch through the store (#5425)

Two sketch commands landed on main after the store: sketch.toggle_diameter (#7729) still
called the removed sketch::target_sketch, and Delete on a picked profile (#7107) read the
sketch straight from the document. Both now go through sketch_store (target and read), and
the store's source scan passes again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: use the sketch store's target after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: read the sketch through the store

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 20:56:05 +00:00
Nathan Dane 85a60c1af6 Render output: Output editor, size presets, Check list, Copy, progress pill and result viewer (#6281) (#6433)
* Render output: size presets, Check list, Copy, progress pill, R and Esc, and the result viewer

* Complete Output GPU help translations and format choices

* Remove Output size labels already present in catalogs

* fix: compile the legacy finishing controls only for tests
2026-10-28 20:55:55 +00:00
semmelrindeandClaude Opus 5.5 683535a18f Evaluation: a pattern of another component's body follows its own component when that moves (#8467)
A pattern of bodies copies them about an axis in its component's frame,
so its copies of a root body depend on where that component is placed.
placement_digest never counted a pattern's bodies, so moving the
component kept the cached copies. Read each body through placed_body,
as Combine does.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:49:55 +00:00
Logan NightandClaude Opus 5.5 d67c8e6231 Sketch text: Arabic and Hebrew are ordered right to left and joined (#8237) (#8324)
* claim: #8237

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch text: right-to-left lines are ordered and shaped (#8237)

A line with Arabic or Hebrew letters is split into display-order runs by the
Unicode bidirectional algorithm (unicode-bidi) and each run is shaped with the
font's own rules (harfrust), so letters join and marks sit where the font puts
them. Lines without right-to-left characters keep the glyph-by-glyph layout.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch text: a line break inside a right-to-left line keeps the text after it (#8237)

The bidirectional algorithm ends a paragraph at a line break; every
paragraph is shaped now, not only the first, so measuring such a line
counts all of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 20:31:02 +00:00
semmelrindeandClaude Opus 5.5 2841210fb2 Sketch Dimension: choose horizontal or vertical from the two points' box (#7295) (#7355)
* claim: #7295

* Sketch Dimension: choose horizontal or vertical from the two points' box (#7295)

Two points or a slanted line got the aligned distance whenever the text
was between the perpendiculars through them, so straight above the middle
of nearly level points was aligned and horizontal needed a thin wedge.
Now the text position relative to the box the two span picks the type:
inside it or in its outer corners aligned, above or below horizontal,
beside it vertical. This is the rule midpoint pairs already used, so both
share auto_orientation().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Dimension: aligned across the line, horizontal or vertical by the pull past an end

Review on #7355: the aligned length must stay the default, and the box
rule shrank its zone to a thin strip on a shallow line. Now `auto` is
the distance between the two points everywhere across from them
(between the perpendiculars through them, and a tenth of their distance
past), and only a clear pull past an end changes it: up or down from
that end gives the horizontal distance, sideways the vertical one. The
two meet on the diagonals through the end, so both zones stay wide on a
shallow or steep line. Midpoint pairs keep main's box rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:27:44 +00:00
raykholo 6b523d6839 Theme drops: build for the web, and import there too (#8226) (#8534)
DroppedFile::bytes exists only on native; the web build stopped at
take_theme_drops. Native keeps reading the file there. On the web, the
shell already reads every drop asynchronously before the app sees it: a
drop over Preferences' Import tile now arrives as a theme and goes to
prefs::import_theme_bytes, instead of being opened as a design.
2026-10-28 18:25:26 -04:00
FrankandClaude Opus 5.5 d7ef5280c5 Ctrl+W closes the design shown, not the browser tab (#5366) (#5466)
Ctrl+W (Cmd+W) closes the active design, asking first when it is
unsaved; closing the last one shows the start page. In the web app a
capture-phase keydown listener keeps the browser from closing the tab
while a design is shown; on the start page the browser closes the tab.
Ctrl+W joins the keys the app reserves, and the tab menu's Close shows it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:15:33 +00:00
froglemonade2andClaude Opus 5.5 f595f38e1c Define a named parameter inline from any value input (#4071) (#7341)
* claim: #4071

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Define a named parameter inline from any value input (#4071)

Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.

- doc: the lexer skips a definition's `name =`, so until the design stores
  it the text evaluates as its expression and commands read and check it
  like any value. `Document::define_inline` then turns every stored
  definition (feature inputs and placements, dimension parameters, sketch
  pattern and text values, joint and coupling values, sheet metal and
  plastic rules, canvas planes) into a user parameter, the unit following
  how the input reads a bare number. A taken, reserved or empty name, two
  different values for one name, and a definition in a parameter's own
  expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
  hold definition-shaped text; the reply has `defined` (the first name,
  as `sketch.dimension` already gives) and `definitions`. A refusal fails
  the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
  changes (a dimension's or feature input's own, references following)
  and sets it; when the value is just `new`, it sets `new`. `changes`
  refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
  sends a definition as typed and previews only its value; the box corner
  and offset Distance 2 use the value; fields whose command keeps no
  expression (sketch scale, move, chamfer) refuse a definition with the
  way to name it. The dimension editor says which parameter it named.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:14:36 +00:00
Colin Faulkingham a3ee8957f4 Sketch: conic curves take their own id prefix, not the constraints' k (#6173) (#8407)
* claim: #6173

* Sketch: conic curves take the id prefix n, not the constraints' k (#6173)
2026-10-28 20:12:48 +00:00
semmelrindeandClaude Opus 5.5 be2168f70d Snap Fit: the Base Height hint in the user's language (#8451)
The hint "at the face" had no catalog message, so it stayed English in
every language. Add it in English and the 26 other catalogs, and check
that every plastic dialog hint has a message.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:12:42 +00:00
DanielandClaude Opus 5.5 93066ab60c Select Other: a still hold opens the list while Orbit, Pan or Zoom is lit (#8437) (#8438)
* Select Other: a still hold opens the list while Orbit, Pan or Zoom is lit

With a mode lit in the navigation bar (or Space held), holding the left button still on overlapping geometry opened nothing, and the release then selected the top item as a click. The viewport treats such a mode as owning left drags: a plain click still selects, and every other check on the mode sits on a drag. The hold was the one place a press that had not moved counted as navigation.

The hold is now cancelled only by a navigation that has started (the drag past the click distance), so it behaves as it does with no mode lit. The hint and the user guide already describe the hold without that condition. A preset's modifier binding (Maya Alt, Alias Shift+Alt, HFSS Alt) and Ctrl+left orbit still cancel it at the press, as before: holding such a chord is a gesture to navigate.

Tests: holding still with each mode lit opens the list, picks from it and a click still selects; a drag under each mode still moves the view and opens nothing; Maya's Alt chord held still does not open the list (it fails without the preset check).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Select Other: the press that opened the list does not move the view

egui calls a press a drag once it has lasted 0.8 s. With Orbit, Pan or Zoom lit, the press that opened Select Other at 0.5 s then became an orbit, pan or zoom, and moving the pointer to a row turned the view under the open list. While the list is open, a primary press no longer takes the lit mode.

Test: a press held past 0.8 s that then moves keeps the list open and the view still, for each mode.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:07:33 +00:00
Colin Faulkingham 90ef106e5f Preferences: the File view entry and the search field carry the window's name (#8318) (#8432)
* claim: #8318

* Preferences: the File view entry and the search field carry the window's name (#8318)

The File view's entry that opens Preferences said "Settings", and the window's
search field said "Search settings" / "No matching settings", while the window
title, the File menu and the help texts around the app say "Preferences".  The
strings that name the window or point to it now use "Preferences"; ids unchanged.

Translations of these ids followed the English source and keep their wording
until the language teams catch up.

Tests: home::tests::the_entry_that_opens_preferences_carries_the_windows_name
and prefs_search::tests::the_search_field_names_the_window_it_searches fail on
main ("Settings" vs "Preferences") and pass here; the prefs_search:: and home::
suites pass, and the full solidcraft-ui-egui lib suite passed in `cargo xtask ci`.
2026-10-28 20:06:24 +00:00
02ac56d12f Feature windows choose Join, New Body or Cut from what the material touches (#6901) (#6903)
* claim: #6901

* Feature windows choose Join, New Body or Cut from what the material touches (#6901)

Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join

Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preference: Choose the operation automatically (on by default)

Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference

Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: a closed window's check stops; the icon audit doesn't choose

A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Box placement test: the window keeps its New Body

The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Join pieces: read the target lists leniently after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 19:57:27 +00:00
Lars Jansen 261d00fbb2 History and browser: a sketch's icon in the colour of its state (#7245) (#7250)
* claim: #7245

* feat(ui): a sketch's icon in History and the browser takes the colour of its solve state (#7245)
2026-10-28 19:40:45 +00:00
raykholo e2935aff95 Stand-up offer: a note only when the part seems to lie on its back (#7717) (#7718)
* claim: #7717

* Stand-up offer: a note only when the part seems to lie on its back (#7717)

* Stand-up note: an unclear shape still gets the note

* Stand-up note: a Don't ask again button, as the dialog has

* Control protocol: the stand-up settings in the sorted ui.prefs list (#7717)

* Stand-up note: the control import test asks as before (#7717)

The test checks the caller's `up`, so it sets the setting to Ask and every
file from another program still gets the offer.
2026-10-28 19:40:25 +00:00
a95f30f186 Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645) (#6664)
* claim: #6645

* Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645)

The centre-point arc always ran counter-clockwise from its start; a
clockwise arc needed a typed negative sweep. The tool now tracks the
signed turn the cursor makes round the centre after the start is placed,
and its sign sets the direction of the preview, the live Sweep box and
the created arc.

sketch.arc.center_point takes `clockwise` with a clicked end: the arc is
stored counter-clockwise from the end and reversed, as a negative sweep
is, so the start keeps its radius and `<id>.start`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: keep the old counter-clockwise centre-point arc behind a preference (#6645)

Preferences > Sketch gets "Center point arc follows the cursor's
direction" (center_arc_follows_cursor, on). Off, the arc runs
counter-clockwise from the start whichever way the cursor went, as it
always did. Its strings are a pending locale file (en, de).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: Japanese and Chinese strings for the centre-point arc preference (#6645)

ja and zh are complete catalogs, so the new preference's label and tip
need them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Sketch: Arabic, Hebrew and Vietnamese strings for the centre-point arc preference (#6645)

Arabic, Hebrew and Vietnamese became complete catalogs on main, so the new
preference needs them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 19:32:13 +00:00
semmelrindeandClaude Opus 5.5 9628e60ca0 Sketch: Reverse Spline Direction (#8224) (#8414)
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:56:34 +00:00
Logan NightandClaude Opus 5.5 bcdee6e0bb Sketch on a face: a round's edges that end a hair apart still close (#8284) (#8386)
* claim: #8284

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: a round's edges that end a hair apart still close (#8284)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: test both ends of a rounded loft end to end (#8284)

A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 18:56:20 +00:00
Colin Faulkingham c2e69ed724 Timeline: the feature menu's suppress item follows the reader's language (#8301) (#8383)
* claim: #8301

* Timeline: the feature menu's suppress item follows the reader's language (#8301)

Suppress Features / Unsuppress Features were raw literals. Menu::label()
translates a label only when a catalog entry carries it, and none did, so the
item stayed English in every language, the Japanese UI included.

The two labels are now the messages timeline.suppress_features and
timeline.unsuppress_features in a new assets/locales/pending file: the English
wording is unchanged, and the complete catalogs (ar, he, ja, vi, zh) plus de and
ko carry the translations.

cargo test --profile ci -p solidcraft-ui-egui --lib -- timeline::tests::the_feature_menu_suppress_item_follows_the_language
fails on the claim commit (the Japanese menu paints the English literal) and
passes with the change.
2026-10-28 18:55:37 +00:00
Jasper van Loenen 728100c26d UI: Fix settings autoscroll bug (#8388)
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user

* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
2026-10-28 18:54:23 +00:00
DanielandClaude Opus 5.5 b470aebe80 Toolbar: Sketch Create drop-down rows share the menu's width (#8409)
In the Sketch > Create drop-down a plain row such as Point was drawn
200 pt wide, the minimum width its labels fit in, while a family row such
as Slot filled the menu. The menu was as wide as the one-line pin hint in
its footer, so the plain rows' hover background and pin stopped short of
the right edge.

The Create menu now sets its width from its rows before drawing them, as
the other panel drop-downs do, and passes that width to the plain rows
instead of recomputing it over a subset. Family rows fill the same width
and the footer hint wraps inside it. The overflow menu's plain rows take
the width of all its commands in the same way. A family's submenu still
sizes its variants to their own labels.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:53:32 +00:00
MarkusReandClaude Opus 5.5 05f62b09e0 Browser menus: V runs the open menu's Show/Hide on the row it was opened for (#8377)
Most browser menus show V beside Show/Hide, but the V key always ran
toggle_visibility, which acts on the selection. A right-click on a body or
sketch row also selects it, so the two agreed there; a right-click on the
Bodies, Sketches or Origin folder, a group, the component or an origin plane
does not, so V did nothing, or flipped a body selected earlier, and left the
menu open.

With a menu open, V now runs that menu's row whose shortcut is V, through
run_item as a click does, and closes the menu (context_menu::press_shortcut).
A disabled row takes the key and does nothing. With no menu open, or a menu
without such a row, V still acts on the selection (#4128, #4409: V stays
selection-based).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:23:26 +00:00
bherbruckandClaude Opus 5.5 5d1c33fc82 Docs: the macOS app is notarized, and the update check names tangency-labs/solidcraft (#8402)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:15:03 +00:00
bherbruckandClaude Opus 5.5 d26de76097 Updates: leave the update to the launcher that manages this copy (#8403)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:14:57 +00:00
austin62jakeandClaude Opus 5.5 65784cae2f Save As offers the open file's own name, not the name stored in the design (#8329) (#8354)
* claim: #8329

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Save As offers the open file's own name (#8329)

Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.

Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 18:11:06 +00:00
semmelrindeandClaude Opus 5.5 003d388b78 Sketch: an arc slot is drawn without a redundant Equal on its caps (#8355) (#8395)
Each cap is tangent to both concentric sides, so its radius is already
half the gap between them and the two caps are equal. The Equal the arc
slot added between them was always redundant; it is no longer added.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:09:47 +00:00
Jasper van Loenen 562d066c0e Fix endless redraw of settings window if setting has empty row, caused by storing setting in row of previous setting (#8399) 2026-10-28 18:07:52 +00:00
semmelrindeandClaude Opus 5.5 f0095a1ae6 Ribbon: a two-line button label stays inside the button's highlight (#8391) (#8405)
A button is 60 points tall and its label starts 32 points down, so two
lines of the label font (31 points) ran 3 points past it. Two-line
labels now take the font size plus 2 points per line and start higher
when they would still run past the button, leaving 2 points below.
One-line labels are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 18:07:43 +00:00
6fffd745fd Insert Part: the Length list opens on the default length, with no "Default" item (#8020) (#8022)
* claim: #8020

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Insert Part: the Length list opens on the default length (#8020)

The list carried an item called "Default" above the standard lengths. It
never said which length it stood for, and one of the lengths below it
always was that length, so the list offered the same length twice under
two names. Change Part Size has always listed concrete lengths.

The item is gone and the list opens on the length the part would be given
anyway. The default cannot be worked out in the dialog, because it is not
one rule: a cap screw or bolt takes the first standard length at or above
2.5 d, a set screw the first at or above d, a dowel pin the first at or
above 4 d. parts.library now reports default_length beside each size's
table values, taken from the shape the engine would build, and the dialog
selects it; the test checks that report against what an insert without a
length is actually built to, for every size of every family.

Leaving the length alone behaves as "Default" did: a new size resolves
the list again, so M6 to M12 moves the selection from 20 to 30. A length
chosen by hand stays until the size changes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Insert Part: the labels test skips default_length too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 17:58:03 +00:00
Tyler GregorcykandClaude Opus 5.5 4a7a8f31f8 Sphere, Torus and Cone dialogs: place them by their centre or base (#5638) (#8328)
* claim: #5638

* Sphere, Torus and Cone dialogs: place them by their centre or base (#5638)

The Box and Cylinder dialogs already had typed X, Y and Z placement
fields; the Sphere, Torus and Cone dialogs now do too. Sphere and Torus
show Placement: Center and take a picked point like the Box; Cone shows
Placement: Base Center like the Cylinder. The fields take expressions,
and Edit Feature shows and keeps the stored centre or base.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 17:39:31 +00:00
DanielandClaude Opus 5.5 a1a801fb31 Feature dialog: draw the busy spinner in the footer row (#8362)
With the dialog buttons at the bottom, the spinner shown while the preview
computes or OK applies was painted on its own after the footer: at the
card's left edge and one control height up from its bottom. The footer
insets its row by 12 pt at the sides and 10 pt above and below and centres
the buttons, so the spinner sat outside that inset and about 10 pt below
the buttons' centre line.

Panel::feature now draws the spinner through the footer's left slot, so it
shares the row's inset and vertical centre, in the space the footer already
leaves for it before the status text. The rect is published as
dialog:footer:spinner, and a panel test checks it lies in the footer row,
at its left inset and on the OK button's centre line. The spinner in the
title row (buttons at the top) is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 17:32:56 +00:00
Nathan Dane 293ed5fab7 Render inspector: Appearance editor with the look chain, scope, mixed values and Advanced (#6281) (#6432)
* Render inspector: selection-following appearance panel with the look chain, Applies to and edit controls

* Render appearance: Glass, Clear coat, Maps, Saved optics and Reflections sections

* Update Render navigation tests for dedicated editors

* Exercise Focus keyboard protection through the Library search field
2026-10-28 17:23:16 +00:00
semmelrindeandClaude Opus 5.5 1eec6d90b7 Sketch text: Bold in a variable font sets its weight axis (#8211) (#8331)
A variable font (one file for every weight, as most web fonts ship) has no face marked bold,
so Bold failed with "has no bold face". Without a bold face, a face whose wght axis reaches past
semibold is now set to weight 700. ttf-parser gets its variable-fonts feature for that.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 17:08:27 +00:00
austin62jakeandClaude Opus 5.5 86342b8c5c DXF import: an elliptical arc comes in as exact conic arcs, not a fitted spline (#8155) (#8241)
* claim: #8155

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* DXF import: an elliptical arc comes in as exact conic arcs (#8155)

A partial ELLIPSE (how Fusion, and SolidCraft's own DXF export, write an
elliptical arc) was read as a degree-3 spline fitted through 16 samples,
which strays from the ellipse between them: 0.84 mm on a 300-degree arc
of a 200 x 40 mm ellipse. It is now read as exact rational-quadratic
conic pieces of at most a quarter turn each, which the sketch keeps as
conics. A conic arc written by SolidCraft's DXF export now reads back as
the same conic.

The arc's sweep is taken with rem_euclid instead of a loop that added a
turn at a time, which ran for billions of turns on a start angle of 1e11.

sketch.drawing_bounds and the width/height sizing of sketch.insert_dxf
measure a conic by points along it, not by its apex, which can lie
outside the curve.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 16:56:17 +00:00
Colin Faulkingham 95ba99d710 Move/Copy: a triad drag ends where the button is released (#8265) (#8309)
* claim: #8265

* Move/Copy: a triad drag ends where the button was released (#8265)

A frame carries all the input queued since the last one, so the release
that ends a drag and further pointer movement — the hand keeps moving as
the button goes up, or input is queued during a busy frame — arrive
together, and the frame's latest pointer position is already past the
release. The drag's final change was read from it, so the value, the
preview and the command both jumped to wherever the mouse had got to;
pressing Enter right after the release closed the window first, which is
why that worked around it. Rotate and occurrence moves share the triad.

The final change now comes from the release event's own position, which
the raw input carries (egui's processed pointer events drop it). The
regression test sends a release at 20 mm and a move to 30 mm in one frame:
30 mm before, 20 mm after.

Fixes #8265.
2026-10-28 16:53:41 +00:00
raykholo dd2e44bb12 Raise the largest file SolidCraft opens with a setting or launch flag (#4086) (#7565)
* claim: #4086

* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)

* Translate the file size limit strings

* Size limits: design files are .sc now, .solidcraft still read
2026-10-28 16:52:29 +00:00
Homero Thompson f103468dba Params: a list parameter refuses a wrong type instead of losing entries (#6651) (#6683)
* claim: #6651

* test(#6651): a list parameter of the wrong type is refused

A list parameter such as a cut's `targets` or an export's `bodies` loses entries without an error: a value of the wrong type reads as an empty list, which most commands take to mean "every body". The regression test drives the engine the way a user does: two bodies, a box cut that crosses both and is meant for one of them, and a `targets` of the wrong type. The command must refuse it and leave the design as it was.

* fix(#6651): a list parameter refuses a wrong type instead of losing entries

A list parameter of the wrong type was read as an empty list, and an empty
list means "every body" to most commands: a cut meant for one body cut every
body it touched and the command reported success.

A wrong type is now an error that names the parameter, the offending entry
index and the value it got. A list longer than 10000 entries is an error
instead of being cut short. `null` stays absent, as the schema contract says,
and a plain string is still a list of one. The 80 call sites now propagate the
error instead of losing entries; the commands that take feature keys, which
may be named or numbered, read them with their own reader.
2026-10-28 16:25:53 +00:00
Lars Jansen dca332201f Status bar: the sketch's state, what is being edited and the design's units (#7243) (#7248)
* claim: #7243

* feat(ui): status bar with the sketch's state, what is being edited and the design's units (#7243)
2026-10-28 16:25:32 +00:00
PaddleStrokeandClaude Opus 5.5 79f53a0999 Sketch dimensions in their own colour in every theme (#7861) (#8124)
* claim: #7861

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensions in a colour of their own in every theme (#7861)

Dimension lines, arrows and values were drawn in the same near-black or
near-white as fully constrained sketch curves, so they were hard to tell
apart in a busy sketch. Every theme now sets its own dimension colours:
plum on Light, orchid on Dark, and a hue from each built-in theme's own
palette. Colour vision tests measure them against the curves, the
construction lines and the conflict red, and a new test holds every
shipped theme to readable, distinct dimension colours.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 16:23:47 +00:00
cronos b72165fd30 Sketch: show temporary centre and midpoint alignment guides (#7903)
* Sketch: show center and midpoint alignment guides

Add transient per-viewport horizontal and vertical guides with a sketch preference. Related tests, native UI, WASM and supplementary Linux checks pass. Full CI remains blocked by unchanged Windows engine dead-code Clippy errors.

* Sketch: complete alignment-guide translations

* Tests: compile chosen-program mutex only on Unix
2026-10-28 16:07:05 +00:00
8e26fe9388 Measure: number the two picks in the view (#6020) (#6021)
* claim: #6020

* Measure: number the two picks in the view (#6020)

"1" and "2" beside the measured line's ends, as the panel lists the
picks, each just past its end so it stays off the line and its length.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-28 16:05:22 +00:00
semmelrindeandClaude Opus 5.5 c8c9534022 Create Sketch: the grid previews the origin plane under the pointer (#6975) (#7404)
* claim: #6975

* Create Sketch: the grid previews the plane under the pointer (#6975)

While Create Sketch waits for its plane, the grid now lies on the origin or
construction plane under the pointer, so the sketch's plane shows before
the click. A plane's browser row under the pointer lights that plane in the
view, and previews it the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Create Sketch: the planes at the top of the History preview too (#6975)

main now draws the Origin rows at the top of the vertical History as well
(history_rows). Hovering a plane there lights it like its row in the browser:
the plane is handed over the same way the hovered bodies are.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:58:33 +00:00
Christian HammacherandClaude Opus 5.5 aae2c5e417 Assemblies: edit a linked component in place, with the assembly around it (#7672) (#7819)
* Links: update linked designs that changed while the assembly's tab was away

A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: the assembly guide says linked designs update when their tab returns

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Links: Vietnamese strings, now that vi is a complete catalog

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Links: remember what each design last read, so an update that fails is tried again

A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Links: no read during a save-changes prompt, records for adopted designs and missing files

A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assemblies: edit a linked component in place, with the assembly around it

Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.

The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: a double-click opens it, Activate only activates

A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Double-click on a component's face: edit a linked one in place, activate any other

A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from review

An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: Finish Editing on the MODEL tab and the mouse's back button

Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from the second review

Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from the third review

component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: Update Links run as a command in the part refreshes the assembly too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does

A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from the fourth review

Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: the command is Finish Edit, as Finish Sketch is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: a command to start it, and fixes from the full review

Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from the second full review

The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: fixes from the third full review

The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Edit in place: help text for the Finish Edit button

main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:57:44 +00:00
Ajmal Musthafa 2cc6615c2d Enhance two-tangent circle tool: add default radius handling and improve interaction hints (#8116) 2026-10-28 15:57:06 +00:00
9c5b3beb73 geom: cover inside_loop and segments_meet in the fill predicates (#6162)
Add unit tests for fill.rs's two ray-casting predicates, which
fill_general.rs relies on to decide which parts of a surface a loop
covers: a point inside/outside a square and an L-shaped (non-convex)
loop, documenting how inside_loop resolves points on an edge or
vertex; and segments that cross, stay apart, touch at an endpoint,
or are collinear with and without overlap for segments_meet.

Closes #38

Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
2026-10-28 15:49:30 +00:00
CamWightandClaude Opus 5.5 14acdc2a6d Render: one sRGB transfer function (#7161) (#7162)
* Render: one sRGB transfer function, geom::srgb, for the hand-written copies (#7161)

Twelve places wrote the sRGB encode or decode formula out by hand (doc's glass
recipe, engine's render library, glTF import, the PNG film, photographic and
presentation output, the ray tracer's image, the stage, the surface decoder,
texture normalisation and the theme's contrast check). They now call
solidcraft_geom::srgb: encode/decode on 0..1 values, encode8/decode8 for 8-bit
codes. render::surface::srgb8_to_linear stays as a re-export, so its callers
are unchanged.

Same results: the module's tests compare it bit for bit with the formula as the
callers wrote it, over all 256 codes and a dense sweep of linear values plus
the knees, out-of-range values, infinities and NaN, for each way the callers
clamped (after encoding, before it, or not at all), and decoded values either
side of the decode knee, where no 8-bit code falls.

One change: glTF import encoded in f32. Over every f32 in 0..1, 218 of
1,065,353,217 values sit on a rounding tie that f32 got wrong and now give the
neighbouring code (f64 gives the nearer one).

Left as they are: render/job/image.rs (replaced by exact tables in its own
change), the tests and the starter-pack validator that keep their own copy as
an independent reference, and the WGSL shaders (they can't call Rust).

Fixes #7161

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: the sRGB codes of five callers that had no test of their output (#7161)

The glass swatch, a library surface applied as a plain appearance, glTF's
fallback for a colour channel that isn't a number, a stage panel and an empty
pixel in presentation output each get an assertion with their sRGB codes worked
out by hand. A planted wrong conversion at each is now caught by that test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:48:56 +00:00
semmelrindeandClaude Opus 5.5 bcb67cc2ec Mirror and Pattern: a body feature reopens with Bodies and its Operation (#8207) (#8298)
Editing a body Mirror from the history showed Object Type Features (the dialog starts from
the timeline selection, the Mirror itself, which turns pattern objects into features) and
dropped its saved Join. The editor now sets the objects back to Bodies for a body Mirror or
Pattern and restores the Mirror's combine.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:38:41 +00:00
Jasper van Loenen a8e5bfca73 Fix BOM table being too narrow (#8113) (#8144)
* claim: 8113

* Bill of Materials: size columns to their contents, Description fills the rest (#8113)
2026-10-28 15:28:55 +00:00
raykholo b68d42e5ec Theme: paste a theme into the Import tile (#8226) (#8227)
* claim: #8226

* Theme: paste a theme into the Import tile (#8226)

Ctrl/Cmd+V on Preferences > Interface imports a copied theme file, the tile's
menu offers Paste theme, and a theme file dropped on the tile imports instead
of opening as a design. Pasted text that is not a theme keeps its usual
meaning. The tile reads "file or paste".

* Theme paste: the new strings in Arabic, Hebrew and Vietnamese too (#8226)
2026-10-28 15:28:48 +00:00