Source archive requested by Judit; no production registration. C7 strict Clippy and wasm check passed; native build/tests and application acceptance remain pending.
Source archive only, not a qualified production feature. C3 selected tests passed before a test-helper lint failure; corrected source and conditional CPU/Raster patches await validation.
Source-preservation checkpoint requested by Judit; not a qualified feature commit. Combined engine/UI compilation cancelled for resources; full gates and native acceptance remain pending. Production baseline unchanged.
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)
Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Select Other: label curves from Intersect as intersected (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #8692
* Browser: remember the folded card across runs, optional reveal on hover (#8692)
The browser card's fold (the chevron in its header) is now a preference,
saved with the other layout state, so the next run starts the way the user
left it. Preferences > Interface > Layout adds Shown / Reveal on hover: the
browser then stays out of sight until the pointer comes over its place or
the thin tab at its left edge, fading in like the navigation bar's Hide
until hovered, and stays while the pointer is inside or a menu, drag or text
edit started from it is open. It never folds in that mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: move the reveal-on-hover messages to a pending locale file (#8692)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8306
* Timeline: joints in feature folders (#8306)
timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
* claim: #8862
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Enter after `pi mm` keeps the unit, not a longer name (#8862)
A unit after a name or constant multiplies it, as after a number (`pi mm`
is pi millimetres), so it is a complete word there: the longer names are
listed unarmed and Enter submits what was typed. A unit at the start, or
after an operator or bracket, stays a prefix as #3664 chose.
Whether Enter completes is now worked out again every frame, unless a key
armed the list. It was kept from when the list first appeared for a word
and caret position, so it went stale when the text before the word was
replaced, or when the box took the focus before the names were gathered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7023
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status bar: switch the mouse mapping from a menu (#7023)
The status bar gets a mouse-mapping button beside the units. It shows the
current mapping, and a click opens a menu of the mappings above the bar.
Picking one sets what Preferences > Navigation sets for it (bindings, wheel
direction, middle double-click, right drag orbits) through
choose_nav_preset. Nothing changes while the status bar is off (the
default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4176
* Preferences: mouse-wheel zoom speed (#4176)
A 0.25x to 4x multiplier for each wheel zoom step, applied in
navigation::handle so every canvas uses it. The 3D mouse keeps its own
speed. Values outside the range are refused when set and reset to 1x when
loaded.
* Control protocol: wheel_zoom_speed in the sorted ui.prefs list (#4176)
* Wheel zoom speed: its label in the complete catalogs (#4176)
* Arabic: fix the Resize Part hint (tanween style, part list, command name)
* Arabic: navigation bar Edge reads as position, tanween spelling in the geometry budget help
* claim: #8040
* wip: 3D line/spline/point tools (#8040)
* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #8794
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Control token: a closing window removes only its own token and discovery files (#8794)
Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.
remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8835
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a selected text moves when dragged from anywhere inside its frame (#8835)
A drag had to start on one of the text's letters to move it. From the
space between letters, or inside a letter's outline, it found no geometry
and drew a selection box instead.
Off the sketch's own geometry, a drag from inside the selected text's
frame now grabs the text, as one from a letter does. Handles, dimensions
and geometry under the pointer still come first, and outside the frame a
drag from empty space still draws a selection box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Trackpad: zoom with two-finger scroll while holding a key, chosen in Preferences (#8322)
Holding the zoom key turns a vertical two-finger scroll (or a wheel) into zoom at
the pointer, with the wheel zoom's speed, direction and anchor, so a laptop user
zooms without pinching. Preferences > Navigation > "Zoom with two-finger scroll
while holding": Cmd on macOS and Ctrl elsewhere (default), Option/Alt, Ctrl, or
Off. That key with the scroll did nothing before, so no default changes; Off
keeps it that way. Shift keeps its orbit.
* Trackpad zoom modifier: off by default (#8322)
Scroll keeps its usual meaning until a key is chosen in Navigation.
* Trackpad zoom modifier tests: Off is the default; tests that zoom choose Cmd (#8322)
* Trackpad zoom modifier: zoom once alongside the Ctrl+wheel pinch from #8539 (#8322)
A wheel the chosen key claims is no longer also read as a pinch, and a key that is not
chosen keeps main's pinch handling unchanged.
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.
- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
does) but the dialog warns, and the reply lists it under shared.
corner_free looked only in a fixed column at the view's right edge and took
the largest free rect there by area. Next to a tall dialog docked at the
right edge, or the Assistant in the Floating layout, the narrow strip beside
the pane won: the toasts were squeezed into it, their text broke inside
words, and with a wider pane they were not shown at all.
It now tries that column first and then columns ending at each obstacle's
left edge, nearest the corner first, and takes the first free rect that is
TOAST_WIDTH wide and tall enough for a toast, as the frame-rate readout
moves beside a right pane (#6755); failing that, a rect tall enough beats a
wider one too short to show any toast. Without a pane the stack stays
exactly where it was.
* claim: #7688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Graphics: a background colour of your choice for the 3D view (#7688)
Preferences › Interface › Theme gets a Background row: the theme's
gradient (the default, unchanged) or one colour for the whole application,
filling the view in either theme. The window keeps its own colours, a
picture of the view (`ui.render`) takes the colour too, and `ui.prefs`
sets it as `viewport_background` ([r, g, b] or null).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: add joint-aware assembly Move handles and live motion readouts
* test: improve render job failure diagnostics
* fix: preserve assembly Move compatibility and viewport theme colors
* ci: skip default label sync for fork PRs
* fix: keep Windows CI checks portable after main rebase
* test: cover RTL assembly strings and stable refraction job
* i18n: cover assembly Move in Vietnamese
* i18n: cover assembly Move in French
* fix: complete CGA palette for assembly motion handles
* fix: complete Assembly Move palettes and Turkish strings
* fix: retain assembly move cache answers and toolbar help
* style: format merged assembly Move navigation guard
* fix: align Assembly Move preferences and tests with main
* Fix offline update fixture synchronization and clipped prism intersections
Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
* claim: #8592
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: error and warning marks in the browser and on folded folders (#8592)
In the History "In browser" layout, a feature whose build failed gets the
error icon at the end of its row, one that built with a warning the
warning icon, with the message in the tooltip: the marks and text of the
History on the left. A folded History or Features folder carries the
worst mark of what it holds, and so does a folded folder in the History
on the left. Suppressed and rolled-back features are not built and get
none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- active_body: take every body's owner in one pass (model_body_components) instead of searching the timeline body by body
- Timeline strip: find each chip's result in a table built once per frame (result_index) instead of a linear search per chip
- 4,880-body design: UI frame 31-32 ms -> 7 ms of CPU; tests pin the active body and the result lookup
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #8095
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)
component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.
The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)
Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)
Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The wasm compile ran only by hand, so #8227 (a native-only DroppedFile::bytes() call in
crates/ui-egui) passed PR CI and the merge queue and broke the web build on main (#8534).
A merge group that touches the crates below the apps, the web app, the vendored crates, the
manifests, the toolchain or this workflow now runs `cargo xtask wasm`, and `ci` requires it.
Dependency advisories ran only nightly. A pull request or merge group that changes Cargo.lock
or a Cargo.toml now runs `cargo deny --locked check --warn unmaintained advisories`, and `ci`
requires it then. The nightly keeps the full advisories, bans and sources scan.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4127
* Render preview: geometry budget from the device, readable refusals (#4127)
The Render preview refused every scene over a fixed 128 MiB of geometry. On
desktop the budget now follows the device's buffer limit (eight of its
largest buffers, at most 2 GiB; 2 GiB with the usual 256 MiB buffers). The
web keeps 128 MiB.
The product upload runs under its own GPU error scopes: an allocation the
device refuses is reported in the preview instead of reaching the device's
uncaptured-error handler, and the half-uploaded batches are dropped. Buffer
uploads map the buffer themselves so a refused buffer fails the upload
rather than panicking in create_buffer_init.
Refusals name the geometry size and the limit and say how to get under it,
on a theme panel card that stays readable on any preview background.
* Render preview: keep the previous geometry budget behind a preference (#4127)
* Render preview: adapt the device budget to main's GPU upload errors (#4127)
* claim: #5717
* ui(feat): let users choose visible toolbar tabs
Keep Sheet Metal and Weldments visible by default while adding persisted tab visibility controls and restoring specialty tabs for designs that use them.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* ui(fix): respect hidden toolbar tabs in every design
Remove feature-based visibility overrides for Sheet Metal and Weldments. Keep all tabs visible by default and preserve the user choice across feature creation, opening designs, selection and undo.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
The nightly failed every day from 2026-10-16 to 2026-10-28 without anyone noticing. A new
nightly-alert job (scheduled runs only, the only job with issues: write) opens or comments on
one issue, "Nightly CI is failing" (label ci), when a nightly job fails, and closes it when a
nightly passes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7724
* Update now installs the newest release, checked when pressed (#7724)
* Update: close the unmanaged-install test after the rebase (#7724)
* Update: the refresh messages in Arabic, Hebrew and Vietnamese too (#7724)