* claim: #2153
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Zebra: flat faces keep one stripe colour while the view turns (#2153)
A face whose normal lies in the upright plane through the view (every
horizontal face) reflects straight ahead, where the zebra's sideways
coordinate is zero: exactly on the edge between a black and a white
stripe. Rounding then picked one or the other from frame to frame, so
the face flickered while the camera orbited. Straight ahead is now white.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fold the pending design format changes (browser-nested-groups, point-cloud-properties, print-faces) into format 45.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9741
* motion.list gives study keys in motion.study units
Angle keys came back in radians while motion.study takes degrees, so an
agent that listed a study and wrote it back changed every angle by a
factor of 57.3, silently. Convert key values on the way out like
joint.list does (degrees for angles, mm for distances), give each key a
unit and its joint's name, and add a round-trip regression test.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9407
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section caps: a body touching another along a curved face keeps its own cap (#9407)
Seen through a cut, a far wall and another body's face lying on it (a shaft
in its bore, a ring in its housing) are the same surface faceted two ways, so
the marking pass let the other body's face win in streaks. The section's
passes now first count the faces behind the cut in the stencil (back +1,
front -1): where the count says the cut runs through a body but a front face
won, the back faces are drawn again pulled toward the eye by a few pixels and
take the cap back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9279
* Parameters: an option to hold edits until Apply or OK (#9279)
"Apply each change as you leave its field" (on by default, remembered in
the preferences as parameters_apply_live). Off: an expression edit is
checked when its field is left but waits, without a preview; Apply or OK
sets every held edit in one parameters.change {changes}, so the design
rebuilds once and one undo takes them back. Cancel, the close button and
Escape drop them. Turning the option back on applies what waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the parameters_apply_live preference in ui.prefs (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the hint says edits wait for Apply or OK when they do (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the remaining CPU lighting and
reflection controls, render diagnostics, lens and film effects, GPU path
tracer options, HDR source details, the resource library and the raw
linear EXR options.
* claim: #9144
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DXF export: the full release 2000 file structure strict readers need (#9144)
The view and flat pattern DXF left out parts of the AC1015 file that a
strict reader expects: the CLASSES section, the VPORT, VIEW, UCS, APPID
and DIMSTYLE tables (with *Active, ACAD and Standard) and the ACAD_GROUP
dictionary under the root dictionary. They are written now, along with
$DWGCODEPAGE; the active viewport looks at the whole drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8776
* Crash reports: a window opened after startup no longer labels the run "during startup" (#8776)
egui-wgpu reports "window surface" and "surface configure" for every native
window, also the ones opened after startup, such as the agent chat in its own
window. Each one overwrote the journal's "running" phase, so a later unclean
exit was reported as "during startup (surface configure, N s after launch)".
crash::startup_step records a startup step only until the app runs, and the
app's egui-wgpu hook calls it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Browser: the recover-unsaved-work card always shows Recover and Discard
A window's scrolling body was only offered the height the card had the
frame before. A card first laid out while the page was still tiny (a
browser canvas not sized yet) kept a body of no height for good, so only
its title showed and the required choice could not be made. The body is
now offered the room the screen leaves and shrinks to its content, which
also covers the desktop recovery card and every other system window.
Fixes#9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the quick measurement, a few
Preferences labels and a large part of the Render panel (adaptive
sampling, surface aging, camera background, CPU lighting and environment).
* claim: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* feat(browser): reorder features by dragging rows of the History in the browser
Let users drag features in the History shown in the browser to move them, with the same drop bar and checks as the History at the left, while the rollback marker still drags on its own.
refs: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Add Finnish (fi) UI localization (#9626)
A fi catalog ("Suomi") translated from en.json, all 4801 messages,
registered in LOCALES between es and fr, with
finnish_catalog_is_registered_and_translates_keys, the language listed
in docs/localization.md (registered and partial) with its terms, and a
pending attribution row.
Fixes#9626
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Finnish: the 3D mouse Restore defaults button gets its own label
It shared its text with Restore defaults elsewhere on the page, so the layout test found
the wrong button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Janiz-zzz <267742026+Janiz-zzz@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* fix(viewport): keep running when the view area comes out inside out
Make the layout beside the docked Assistant give way instead of closing the app when a window reconfigure leaves the view area inverted.
refs: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #3305
* fix(agent-chat): support ACP configuration options (#3305)
Handle current select options for model, thinking effort and mode, with confirmed snapshots and legacy compatibility. Full quality gate attempted; draft delivery authorized with unrelated geometry/property/timing failures documented in PR #3867.
* fix(agent-chat): keep configuration selectors inline (#3305)
Use compact value pickers and bounded wrapping to preserve conversation space; verified at normal and narrow widths with the installed OpenCode V2 server.
* style(agent-chat): format tool events
* claim: #9358
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the expression field opens wide while you edit it (#9358)
A parameter's expression that is too long for its cell opens over the
cells to its right while it has focus, wraps instead of scrolling, and
shows the live value or error under it. Enter still applies it and the
field returns to its column; a short expression stays in its cell. The
add row's expression field does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On a loaded runner the hover alone has taken 70 ms against a 190 ms index, which failed
unrelated pull requests. Waiting for the index would still cost all of it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6106
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Extrude: a sketch picked in the Browser or History takes all its profiles (#6106)
With Extrude, Revolve or Emboss open, a plain click on a sketch row in the
Browser or on a sketch in the History now fills Profiles with every profile of
that sketch (the island inside another profile's hole is left out). Before, the
click only changed the selection, which the dialog never reads.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #2227
* 3D mouse: optional orbit while a sketch is open (#2227)
A new Navigation preference, "Turn sketches with the 3D mouse"
(space_mouse_sketch_orbit, off by default), lets the cap and a device
app turn the view while a sketch is open and seen square on, as the
mouse already can. Off keeps today's behaviour: pan and zoom until the
view is tilted away from the sketch (#6687). Restore defaults on the
3D mouse section resets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the settings list in order after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9495
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: say when a reply hit its length limit or was declined, not that the model lacks tools (#9495)
The API client never read why an answer stopped, so a Claude reply cut
off at max_tokens while thinking (its thinking text is empty by default),
or a refusal, ended the turn as normal with nothing said. The chat then
blamed tool support: "The model didn't use SolidCraft's tools".
Reply now carries the stop reason: Anthropic stop_reason max_tokens and
refusal, or OpenAI finish_reason length and content_filter and a message
refusal. Any other value is a normal end. The turn ends with that reason,
which already keeps the tool-calling notice away, and the chat shows
what happened in place of the raw "(max_tokens)", for ACP agents too. A
tool call cut off at the length limit has incomplete input, so it is
neither run nor kept in the history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: each dropdown option shows the hole it makes while hovered
Extents, Hole Type, Hole Tap Type and Drill Point list names only, so seeing
what an option makes meant picking it. Hovering an option now shows a small
section of that hole beside the list, drawn by the dialog's own section
painter from a copy of the form with the option applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhpMr6L9PR8SJXjM6MbQrD
* Hole: give the dropdown previews a gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: danieldimitrov86 <danieldimitrovdev@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
While Frame shows the picture's frame, the preview projects into that frame
rather than the viewport, but Fit Product and the fit on entering Render
framed the product for the viewport's free area, so a picture taller than
wide cut the product at its sides. The fit now uses the viewport layout
seen from the frame (the frame as the viewport, the free area inside it
with the usual 16-point margin).
Entering Render fitted before the saved setup replaced the draft, so a cold
workspace with a portrait setup fitted for the old draft's aspect; the fit
now runs once the setup in effect is loaded.
render.camera.fit takes the picture's aspect (0.000001 to 1000000) through
Camera::fit_aspect, which publishes only a valid fitted camera: an aspect
that would divide the distance into infinity is refused and the previous
camera, document and undo stay as they were.
* Claim #9479
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: an option to keep value boxes out of the view (#9479)
Design > "Show values beside their handles in the view", on by default.
Off, a command's value box (Extrude's Distance, Fillet's Radius, a hole's
reference distances...) isn't drawn over the model; the command window's
value field takes the keyboard that opening the window or a pick gives the
box, its text selected, so a number typed after a pick still sets it. The
handles stay and still drag the value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: the value box option in Arabic, Hebrew and Vietnamese too (#9479)
The complete catalogs must carry every English message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8941
* Render: a size the CPU methods refuse names the profile that renders it (#8941)
The Shots strip offers 4K UHD whatever the method. Under the default CPU
raster, and under CPU ray tracing's default Compact profile, Render was then
refused with English engine text that didn't say how to render that size.
The refusal is now translated and names the smallest CPU resource profile that
admits the size (with CPU ray tracing, for raster, which has no profiles). The
size lists mark such presets. Nothing is switched: method, profile and
resolution still change only when chosen, and GPU path tracing is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: sort each section by name (#8563)
The Name heading of every Parameters table steps through A to Z, Z to A and the
listed order. Each section sorts on its own: Favorites, User Parameters and each
model group (the groups keep the design's order). Names compare in natural order
(d2 before d10, letters ignoring case). The choice is kept in egui's persisted
memory like a section's open state. While sorted, a user parameter's move arrows
are disabled. The sortable heading and natural_cmp live in ui_kit::table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters sort: gallery entry for the sortable heading, natural_cmp private
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: nest groups and reorder components
Groups can hold other groups (up to 8 levels) and be reordered with the
items around them. Sub-components can be reordered too, through a new
`components` list in `browser_order` that is not drawn as a folder.
Document: `BrowserGroup` gains `parent`; group items and `browser_order`
lists hold `BrowserEntry` values (a number is a group, a string an item).
One pending format file; older designs read unchanged. Loading and
refreshing drop what the lists name that is gone, and cut cycles and
over-deep nesting to the top level.
Engine: `browser.group` takes `parent`; `browser.move`, `browser.order`
and `browser.ungroup` handle groups. A change to only the browser's
groups and order no longer re-evaluates the model.
UI: nested rows, dragging a group row (top of a row: before it, the rest:
into it), New Group inside a group, and dropping a placement on the top
of a sibling to reorder it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed formatting
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed unintended side effect in render scene browser test
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Preserve group order in render workspace
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Increased test coverage
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Updated clipboard test from upstream main for group item type
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #9281
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a number parameter in the words shows its value (#9281)
A text's words expression can now name a number parameter: `'W' + Width`
reads "W85 mm" (lengths in the design's units, angles in degrees, up to
three decimals). `number(Width)` drops the unit and `number(Width, 2)`
fixes the decimals. The words and the cut follow a parameter edit in the
same rebuild, a rename reaches inside number(), and deleting the parameter
is refused while a text shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a Text starting with = builds its words from parameters (#9281)
In Edit Text, a Text that starts with = is the words' expression
(='W' + number(Width)): OK keeps it, the dialog shows it again with its =,
and an untouched OK no longer turns it into typed words. Typed words still
replace it, and a saved text that happens to start with = stays typed
until it is edited. The field's tooltip says how.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: the formula hint in every complete catalog (#9281)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9246
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Down arrow in an empty field lists every named parameter (#9246)
In an empty expression field, Down opens the completion list with every
named parameter (not just the first eight), armed on the first one; Up and
Down walk it, the list scrolls to keep the chosen row in view, and Enter
inserts it. A field that already holds text keeps Down for itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Preferences caps the Down-arrow parameter list (#9246)
Down arrow in an empty field lists the parameters up to "Parameters
listed by Down arrow" in Preferences > Design (default 50, 5 to 200),
favourites and the design's own parameters first, so a large design
does not build a list of hundreds of rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a label that fits for the parameter list cap (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: the parameter list cap in every complete catalog (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>