* claim: #9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the system note reaches agents beyond the Claude adapter
The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.
Fixes#9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- 247 help texts (help.*) and 95 UI messages: theme options, viewport status, quick measure, personal sheet-metal rules, analysis details, sketch report
- Terms aligned with fr.json; no-break space before : ; ? ! as in the catalog
- Pending file, folded on main after merge
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #9919
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919)
Smart Extrude passed the shown bodies as `participants` to keep hidden
ones out (#6901), but with none shown that list was empty, and the
engine reads an empty list as the whole scope: a profile on a hidden
body chose Cut, which has no shown body to change, so nothing was
previewed and OK did nothing. With no body shown it now chooses New
Body.
The operation it latches for a side is also decided again when a body
is shown or hidden while the window is open, as a new start already
does (#467): showing the body an extrude goes into turns it to Cut,
hiding it again back to New Body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9916
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: the window can be dragged by its title (#9916)
The window was pinned at the top middle of the screen (ui_kit::Window
anchor), over the model, in a sketch or not. It now starts there and can
be moved (`placed`), as the file-load card can.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
The `initialize` instructions were one paragraph of command shapes. Replace
them with version-neutral guidance: read `skill_reference solidcraft-modeling`
first, plan the numbers, build in a few `batch` calls, the primitive routes
and the fillet-shell-inside-holes order, what follows a parameter, `measure`
after each stage with a coalesced parameter check, and `timeline.edit` /
`parameters.change` / `edit.checkpoint` to fix instead of rebuilding. The
Assistant's system note gets the same pointer; docs/mcp.md says so.
`instructions_name_only_real_tools` now checks the command ids as well as the
tools, and `instructions_recipe_builds_a_parametric_shelled_box` builds a part
the way the instructions describe and checks its volume, axes and parameters.
Refs #3380
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380)
`measure {"summary": true}` replies one short object per body (name,
volume_mm3, bbox, faces, closed) with body_count and total.volume_mm3,
as a tool and as a batch step. `body_topology {"faces": "cylinders"}`
replies only the cylindrical faces, the kernel's split halves merged
by radius and axis line into {radius, origin, axis, extent, names},
and no edges. Both defaults are unchanged. The merge uses only what
model.faces and model.edges already reply.
Measured on a 13-feature enclosure, body_topology is 74 KB and measure
1.1 KB per body; agents filter them with scripts, and seven of 29
benchmark runs asked for exactly a cylinders-only listing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: keep body_topology's cylinder merge next to check_parameters' without a name clash
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* Claim part of #9738
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: default names skip names in use (part of #9738)
Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9858
* 3-Point Circle keeps snapped clicks as coincident constraints (#9858)
The tool sent only the three clicked positions, so a click snapped to a
point or curve left no constraint and the circle was free once drawn.
Each click now goes as its snap, as the 3-Point Arc's do, and the engine
adds a PointOnCurve for each referenced point, as the centre circle's
through click does (#3099).
* Fix#9858 test: assert the clicked midpoint point, not the line end
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A new tool that checkpoints the design, sets every value in one
parameters.change, reports measure, errors and cylinder axes, and
restores the checkpoint, so the loop set_parameter / measure /
body_topology / set back costs one call and one rebuild.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Adds the last 79 German translations for messages that exist in en.json
but are missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the agent chat tool summaries,
the history, sending to a slicer, Perforate, the window system and the
web app.
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the Render studio (lighting,
environment, sun, depth of field), bounded volume and interior scattering,
saved shots, the timeline messages, thread direction and the agent chat
and endpoint settings.
* claim: #9860
Co-Authored-By: Claude <noreply@anthropic.com>
* Sketch panel follows Dialog buttons at top (#9860)
The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.
Changes a default: no
Co-Authored-By: Claude <noreply@anthropic.com>
* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9742
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* joint.drive: a suppressed joint stores nothing; the reply says what was asked and why a value differs (#9742)
Driving a suppressed joint answered moved: false with "H is suppressed"
but wrote the values into the joint, with an undo step, so the part
jumped when the joint was unsuppressed. A suppressed joint outside any
motion link now stores nothing.
The reply gains `requested` (the values asked for, before limits and
links) and `held`: each driven value that ended up elsewhere, with why
(a motion link sets it, as a screw's travel follows its turn; a limit;
contact; a closed loop). A drive that moves nothing gives the first held
value's why as `reason`, so driving a screw's distance alone no longer
answers moved: false without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9735
* Sketch: conflict messages name real constraints, not the refused one's id or a false 'fully constrained' (#9735)
* fmt + clippy: contains over iter().any (#9735)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Add German translations, batch 7 (#7237)
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the parameter list setting and
the Render panel pages: GPU material overrides, nested dielectrics, saved
optics, output size, physical background, presentation filters, preview,
quality budget, regrade and the result area.
* German batch 7: render.result_sequence follows the catalog's Checkpoint term
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9740
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Body names: inspect.interference refuses an unknown body; appearance reads take a placed copy's name (#9740)
inspect.interference dropped a name that is no body, so a misspelled or
wrongly cased name left that body unchecked and two overlapping cubes
answered count 0. It now refuses the name, as inspect.clearance does,
naming the closest body when one is near enough to be a typo or another
case (cmd::no_body, on the existing edit_distance).
appearance.chain, appearance.list and appearance.replace's scope take a
placed copy's name (KB (K:2)) and a placement's (K:2) for the body and
component they show, as appearance.assign already does, through two
Session helpers: own_body_name (on body_frames) and component_or_placement,
which appearance.assign now uses too. A name that is neither is still
refused. select.set already refuses an unknown body on main (#9737).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
* claim: #9715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)
assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9619
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: edit an added AI agent (#9619)
Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9258
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: paste sketch geometry copied in another design (#9258)
Sketch geometry copied or cut in a sketch (sketch.copy / sketch.cut) now pastes into a sketch of another open design with Ctrl+V or the context menu, at the cursor or at the copied coordinates, with the constraints and dimensions among it. A dimension whose expression names the copied design's parameters keeps its value, in its unit; a text keeps its numbers. SketchClip::for_another_design prepares the clipboard; the app keeps the last sketch copy beside the cross-design body/component copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9293
* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)
The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9060
* Ribbon tooltips: help for the Sketch tools (#9060)
84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.
edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The browser asks about every joint of the design on every frame, and
the answer walked the list of hidden joints: a nested STEP assembly
hides thousands of them, so a frame cost grew with the size of the
design.
Session keeps the hidden joints and folders as sets and answers from
them. The sets are built when the view changes and kept until it
changes again: the revision says the design changed, and the lists
say the view changed under it (the view is replaced outside the
engine too, without a revision of its own).
The behaviour is unchanged: the hidden joint stays hidden, the shown
one stays shown, and undo and redo keep the hiding right.
* claim: #9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: say why a drawing has nothing to import, and read UTF-16 files (#9641)
An SVG with nothing SolidCraft draws (only an embedded picture, shapes
pulled from another file with <use>, or not an SVG at all) was refused with
"invalid parameters for sketch.insert_svg: the drawing has no geometry
SolidCraft reads". It now names the file and says why, pointing pictures at
Insert Canvas and Canvas to Sketch. SVG files with a byte-order mark or in
UTF-16 now read, and a gzip-compressed (.svgz) file is refused clearly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: decode UTF-16 with as_chunks (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9041
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041)
Entering the Render workspace started the GPU path tracer setup even with
the default Raster image method. The setup compiles the path shader, which
some Vulkan drivers (Mesa RADV/ANV, NVIDIA) take gigabytes over: the memory
climb reported while orbiting in Render. The setup now starts only while
Render is open with the GPU path method.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9730
* Preferences: unapplied changes no longer reach the settings file while the dialog is open (#9730)
* Preferences: hold unapplied changes out of the settings file while the dialog is open
While prefs_window.snapshot is set, SolveApp::prefs() writes the snapshot's
values - the ones Cancel restores - so the periodic autosave, quit, window
close, web save and control channel can no longer persist a change that was
never applied. Apply re-baselines the snapshot; settings the dialog cannot
change keep saving live. Adds regression tests and updates the tests that
pinned the old behavior.
Fixes#9730
* prefs: bind the snapshot's shadow outside json! so the ui-containers guard reads it
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9686
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: joint.edit takes the two sides
joint.edit accepts a and b in the form joint.create takes them (read by the same origin_param), so a joint can move its attachment without being deleted. A side left out keeps its place. The two sides must stay on different occurrences, checked as joint.create does. Limits, values, expressions and the name are kept; a relation's values start again where its parts are.
joint.edit gets an input contract and reply type (schema/joints.rs), and leaves schema/unconverted.txt.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint shows both sides and picks them again
The Edit Joint dialog now shows the two sides in the same selection inputs as Joint, each pre-filled with the face or edge of its own component under the origin. OK sends joint.edit a or b only for a side picked again, so an untouched side keeps its origin exactly.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side turns the part as joint.create would
joint.edit kept the joint's old angle when a side changed, so the part could turn by a half turn about its axis when the new origin's x lay the other way. When a side moves and no angle is given, the angle is worked out again as joint.create does (the least turn from where the part is now); a relation's angle is its tilt and stays.
The mechanisms reference says joint.edit takes a and b.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: pre-fill sides by name, send the angle only when changed
A side shows the face or edge its snap names, the piece nearest its stored pick when the name has several, else the one nearest that pick; it no longer searches outward from the frame origin, which could show the plate beside a hole for the hole's wall. A point or frame side shows nothing. OK sends the angle only when the user changed it, so a side moved without it turns the part as joint.create would.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side leaves an angle expression alone (#9686)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9465
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)
The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.
A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>