Code main added since the last rebase reads the placed model, a camera or a scene
as values; on this branch they return Result. Picks and the edit dialogs read the
session's placed model through open_meshing::session_world, as the others do; the
revolve and circular-pattern axes, the model axis of a command and the warming of a
computed edit pass the error on; tests unwrap. A test meshing bodies uses
Body::mesh, the one mesher.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HoZgkCdAVrscuw2kjQTWDs
The reworked thread has its own direction, `hand: right|left|both`, on SMLib's
exact screw sweep. Main's #4414 added a second one, `handedness: right|left`, on
Hole and Thread, for the faceted groove this branch replaces. It is taken out: the
field, its pending format change (never released), the hole dialog's direction row,
its hole-preset option, its strings and its tests, which measured the faceted
groove. A tapped hole is right-handed, as before #4414.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HoZgkCdAVrscuw2kjQTWDs
A modelled thread never changes the size of the shaft it is on (#1018, #2853): a
shaft thicker than the thread is refused with the size to make it, as
tests/kernel-cases/threads/2705 expects ("this 14.6 mm shaft is too thick for a
modelled M14 thread; make the shaft 14 mm for M14"). This takes out the turn-down
of #4256: `thread_turn`, the fit that let a thicker shaft through, and its tests;
the 9 mm shaft refusing an M8 and the preview's M6 refusal on an 8 mm shaft are
back as they were before it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HoZgkCdAVrscuw2kjQTWDs
The corner pick (#5173) counts the edges meeting at a picked point; seams already
did not count, and now a tangent join between two spans of one smooth curve does
not either (4332: a chamfer on a spline rim was refused as two edges).
3383: the first occurrence is grounded by default on main, so the recipe
ungrounds it before moving it. 5024: a hole's position must lie on a face, so the
centre is on the box's top edge; the volume is half of the drilled cut, exact.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The branch's placement change (placing the model returns its error) made
world_state, home_camera, bounds, open_sketch_plane, the scene builders,
to_local and auto_operation return a Result. Main added callers of them
since the branch left it; they now take the error as the branch's own
callers do:
- engine: commands pass it on (`?`); helpers answering yes/no or "found"
(snap points, a face's normal, the DXF export check) answer no for a
model that cannot be placed. Frames keep the session for main's lazy body
frames (#6356) beside the placed model the picks are on; a library apply
maps its targets on that placed model. Before an extract or a link is
replaced, the placed model is taken or the command fails.
- ui: panels, picks, dialogs and previews read the placed model through
open_meshing::session_world (none when it cannot be placed: the viewport
says why); Home and Fit frame nothing then.
- cli: the usage table is main's, with kernel-cases in it (a resolution of
the rig's commit had kept the branch's whole file).
- tests read the Results with unwrap, and main's tests of Body::tessellate
mesh through Body::mesh. Main's test of saved boolean retries goes (the
branch saves none), as does the thread half of its dialog rendering test
(the branch's thread dialog has its own); the tapped hole half stays.
- What no caller uses after the merge goes: a mesh body's span, the metric
thread refusal text, and the revolve's targets-as-shown model (main used
it for the coplanar run-on the branch removed). Main's SolidWorks Y-up
test reads the exporting system's name (the branch's STEP header has no
preprocessor or description fields).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FeatureKind::Fillet gains setbacks (serde default: none, omitted when empty),
each a corner vertex and a length expression; a fillet with setbacks is
evaluated by kernel::fillet_setback. Constant-radius exact fillets with
rolling corners only (refused otherwise, in the command and in evaluation).
One distance per corner: SMLib keeps one setback per corner, not per edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ladder 06/009 had no way to ask for one: "solid.thread has no runout (vanishing thread)
length". With SMLib's smlib_screw_sweep_radial (replay e7acea1):
- smlib: the FFI binding and Brep::screw_sweep_radial, the profile moved off the axis by a
piecewise linear law of the turn; crate test: a tooth moved out 1 mm over three turns has
A 2π (c turns + ∫ offset dt).
- kernel: sweep_helix_radial, sharing sweep_helix's checks (helix_profile).
- doc: `ease_in`, `ease_out` (a length, or ISO 3508's standard 2.5 P or short 1.25 P) fade the
groove over that length, its section moving out of the material as it turns (outward for a
shaft, inward for a nut). ease_in is at the end the thread starts from. The runout lies past
the full-form length: beyond a square stop, before a shoulder up to its clearance; at a free
end inside the face. Runouts longer than the thread are refused. No end gets one by default,
so saved threads keep their geometry.
The cut is the integral over the turn of the clipped section's 2π∫ r dA: engine test (2.5 P
and 1.25 P between two collars) within the sweep's wall tolerance times the runouts' wall area
(0.029 against a 0.036 mm³ bound), ladder 06/009 (004's shaft, a 2 P runout before the
shoulder) graded in closed form (measured 1.7e-6 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`tip: chamfer` cuts ISO 4753's chamfered end at each free end a modelled external thread
reaches, after the groove, so the last teeth taper into the cone instead of ending in a
ragged first turn: the material outside a cone `chamfer_angle` to the axis (default 45°)
reaching d_f = d - 2 `chamfer_depth` at the face's end (default the external minor diameter,
the largest the standard allows), a revolved ring cut by one boolean per end. Past the end the
ring keeps to the radii the groove's overrun already cuts. An internal thread is refused (its
entry takes the hole's countersink), as is a tip with no free end or on a cosmetic thread.
The cone is axisymmetric and cut after the screw-symmetric groove, so the volume is the stock's
chamfered section with the thread's material fraction: engine test (both ends 45°, and 30°
x 0.5 mm at a shaft's one free end above a collar) within 1e-4, ladder 06/017 (measured
2.4e-7 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ladder 06/008 had no way to ask for one: "solid.thread has no start count". `starts: n` (1 to
8) cuts n grooves of lead n x P, the j-th a j/n turn round from the first (the same helix j
pitches along), in one boolean with their union. A designation that gives the lead
(M16xPh3P1.5, Tr40x14(P7)) gives the starts, and a `starts` that disagrees is refused. The
helix's self-clearance check and the turn limit use the lead.
Over the same length n grooves of lead nP take the volume of one start of pitch P: engine test
(2 and 3 starts, M10xPh3P1.5) within 1e-4 of the closed form, ladder 06/008 graded as 001
(measured 3.5e-7 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the ISO metric 60° thread existed. Forms now (crates/doc/src/thread_forms.rs, values and
sources in docs/threads.md): ISO metric (ISO 68-1), trapezoidal (ISO 2904 design profile, ISO
2902 sizes), general purpose Acme (ASME B1.5), metric buttress 3°/30° (DIN 513), buttress inch
7°/45° (ASME B1.9 basic profile). Each has its groove as a straight-flanked polygon, its standard
sizes (none for ASME buttress), its designations (M10, M16xPh3P1.5, Tr40x14(P7), S20x4,
1/2-10 ACME, 2.5-8 BUTT) and the size that fits a face. The square thread is refused: no current
standard defines it.
`hand: right | left | both`: a left-handed groove is the screw motion about the reversed axis
rising along it; both cuts the two grooves, crossing, in one boolean. `steep_flank` turns a
buttress. The design diameters are checked against the published tables (ISO 2904/DIN 103,
DIN 513 via IS 4696-3); every form's cut against 2π∫ r w(r) dr per turn to 1e-4 in engine tests
and to 1e-4 in ladder 06/011 to 016 (they measure within 5e-7).
FeatureKind::Thread holds every option the command has (form, hand, starts, ease_in, ease_out,
tip, chamfer_angle, chamfer_depth, steep_flank, all defaulted so saved threads load unchanged);
starts, runouts and the chamfered tip are refused as not built yet. suggested_thread_in takes the
form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A thread of some length ran from "the end of the face nearest the pick", a coin toss for a
pick in the middle (rig 602's 4 mm thread meant for the free bottom end ran at the head end,
cutting 1.17 mm into the hex), and every thread end at a face end got a one-pitch overrun,
which at a shoulder gouged the material past it (ladder 06/004 cut 0.9% of its volume out of
the collar).
- kernel: material_in_ring, the exact intersection of a body with a ring about a cylinder
face's axis, by an SMLib boolean.
- doc: a face end is free when no material lies past it, over the span the groove's one-pitch
overrun reaches beyond its first pitch, within the radii the groove cuts (a cap, a chamfer
the groove runs out through, a counterbore). At a free end the groove runs out as before; at
a closed one (a shoulder, a head, a blind hole's bottom) it stops with its widest part clear
of it; inside the face it stops square.
- doc: a thread of some length starts at the end nearest `from`, else at the face's only free
end, else at the end the pick lies within a third of the face of; a pick in the middle of a
face whose ends are alike is refused, naming `from`. A length as long as the face runs the
whole face. `up_to` a plane or a point's place along the axis. New fields `from`, `up_to`
default to none, so saved threads keep their meaning where it was not a coin toss.
- engine: solid.thread takes extent (full|length|up_to), from and up_to.
- ladder 06/003 (now with `from`), 004 and 007 are graded by volume and centre of mass in
closed form (a square stop inside material removes exactly length/P turns, the section being
symmetric); rig 602's method says why the thread is at the bottom, tolerance 0.02%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A face's boundary nodes are its edges', shared with the neighbouring face.
On a nearly straight stretch (the base of a thread flank's corner, clipped by
a hex head's flats, on an iso-line of the helix) refinement met slivers
between consecutive boundary nodes: their centroid, or the middle of their
inner edge, lies on the boundary chord to rounding. Inserting it split the
boundary constraint, and the face was refused ("boundary crosses itself";
rig threads/602, refused while the body was meshed to pick the fillet's
edges). A sliver whose centroid lies on the boundary is now split at its
inner edges' middles, and a refinement point that lands on the boundary is
not inserted.
The 602 engine test assumed the old kernel's faceted thread (over 1000
faces); with SMLib the thread is exact, and the test now checks that the
fillet finishes and removes a little material.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A notch cut into a sheet's base is a cut-out, so the base outline that
edge_at and the edge names read has no edge along it: a flange picked on
the notch's bottom edge took the name of the nearest outline edge (the
plate's far edge) and was built on the stretch of it the notch left. A
pick nearer a notch's edge than any outline edge now names no edge, and
the flange runs the base's outline round that notch first, keeping as a
cut-out only what it takes of the flanges, then trims and bends as on any
edge of the outline. The edge of a hole inside the base is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Convert to Sheet Metal keeps a shell's (and a plate's) own thickness, but
the rule's values were evaluated with `Thickness` the rule's: under the
default rule (2.5 mm, bend radius `Thickness`) an L 2 mm thick with its
bend modelled R 2 was rebuilt bent R 2.5, losing 8.58 mm3 (2659.911
against 2668.496), and its gap and reliefs followed 2.5 mm too. The rule
is now evaluated for the sheet's thickness (Document::rule_values_at):
in the conversion once the shell's thickness is known, for a converted
plate, and for the flanges, hems and folds added to an existing sheet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solid.mirror and solid.pattern of bodies pushed each copy as a plain body:
no sheet model went with it, so its flat pattern, DXF and bend table were
refused ("`Body1 (2)` is not a sheet metal body"). Each copy now gets its
source's sheet model moved with it (SheetBody::moved). A reflection turns
the frame's handedness over, so a mirrored copy's frame sits on the moved
top face, thickness growing back toward the moved bottom: the same blank,
each bend turning the other way, machining depths taken from the other
face. A sheet feature on the copy rebuilds it in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The countersink's cone started 1% of the drilled body's size above the
entry face, widening on to rc + top tan(half) there, so above the face
it cut beyond the countersink's rim: a wall 0.15 mm from the rim was
notched (#5041, 12 faces instead of 10). The tool is now one revolved
profile: the cone from its rim on the face to just inside the bore, and
above the face the rim's own cylinder, as the bore's cylinder runs on
above it. The cone stays the profile's first segment (csink:side:0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Combine took its tools in their own component's coordinates and joined
them to a target kept in another component's: a root body joined into a
body of a component turned a quarter turn landed where the turn carries
its root coordinates (#3383, 2 shells and 17000 mm3 instead of one solid
of 16750). Each tool is now moved through its own placement and the
inverse of the target's (component placement, then body offset), as
state_in_frame places bodies, and a combine's cache key follows the
placements so moving a component recomputes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solid.shell refused an empty face list ("select 1…1000 faces"), and the
shell feature found its body from the first face picked. SMLib shells with no
face opened (the void sealed inside, its own shell): the command now takes
`faces: []`, the feature shells the one body there is or the one named
(`body`), and an outside or both-ways shell pushes no open face out of the
cavity. Rig shell/4009 declares the void's shell (`shells: 2`), as its method
says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With touching: separate (the default) a join groups the joined body's
pieces by face contact. The groups that hold the material of the body
before the feature stay in it (each unless it touches one already kept;
the first group where the lineage doesn't say), and so do the groups that
touch nothing: a virtual grouping later operations take as one body. Every
other group that touches another along an edge or at a point becomes a
body of its own, and the feature's notice says so. The joined body keeps
its name and never holds an edge or point contact. A join that only
grouped pieces apart gives no notice, so KeptSeparate::Apart is gone.
one_body still keeps every piece in one body.
SMLib's export copies an edge or vertex that touching solids share once
per solid, so the record never listed those contacts:
Brep::region_contacts now takes such copies (the same curve and interval
between vertices at the same points, a vertex at the same point) as the
edge or vertex they share. A contact SMLib leaves out of the topology (the
3612 spoke tangent to its hub) is found on the exact geometry, the least
distance within the record tolerance, and reported as KeptSeparate::
Touching ("along a line or at a point").
The pending format change join-touching-bodies stays: older designs kept
pieces touching along an edge or at a point in one body too. Its notes say
so, and the reopened legacy emboss still expects touching: one_body.
Tests restored to their form before cc49081df and 733d3bd19: kernel-cases
2896-join-arm-end-near-ring-wall-gap (one body of two shells), 3379, 3455
and 3526 (no touching: one_body); the engine tests of posts joined while
apart (twice), two cubes for interference, a ring with a cylinder, the
buried tab and a_join_adds_only_its_sketch's 0.1 mm gap.
join_meeting_nothing_keeps_the_first_body expects one body and no notice.
The #3378 spoke stays 1 mm inside the hub.
New tests: blocks touching along an edge are split with the along-an-edge
notice; blocks apart stay one body without one; a ring with an arm on its
corner edge and a hub apart gives ring and hub in one body and the arm on
its own (doc); the engine's notice for an edge contact; the record's
contacts of cubes sharing an edge or a vertex (kernel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every feature command reads touching (separate | one_body) as it reads
participants; the box and extrude contracts declare it. A feature result
carries notice {message, contact, action} when its join kept solids
apart ("These bodies only touch along an edge, so they were kept as
separate bodies."), the action a timeline.edit that sets touching to
one_body; programmatic calls open nothing.
Tests adjusted: join_meeting_nothing_keeps_the_first_body now expects the
separate body and its notice by default and the old single body of two
lumps with touching one_body; the schema key lists and the
FeatureResult literal gain the new fields.
Engine tests whose subject is a body joined from pieces that share no
volume make it with touching: one_body (posts joined while apart, a
cube joined clear of another, a cylinder joined clear of a ring, a tab
joined in a component); a legacy design reopens with touching: one_body
on its emboss; the 0.1 mm gap of a_join_adds_only_its_sketch leaves the
block a body of its own; and the #3378 spoke starts 1 mm inside the hub,
so the join merges its targets instead of touching the hub along a line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit 7a2915fe32e6549cbf3170d69e0f5b6518e19da3)
doc: world_state, world_state_reusing, state_in_frame_at, state_in_frame, face_point_state,
face_point_names and construction_state return Result. A body that could not be placed, a
frame that could not be inverted, a sketch plane or thread axis that did not survive the
placement, or a failed placing worker used to leave things where they were without a word;
now the call fails with what could not be placed. is_placement is the one test of an
occurrence's placement (finite, a rotation that does not mirror, a translation within
1e9 mm). Opening a design names every occurrence that fails it; add_occurrence refuses
one; a joint solution that would place an occurrence outside one is not applied and the
joints placing it report it.
engine: Session::world_state returns Result and keeps a failure in its cache as it keeps a
placed model. bounds, home_camera, open_sketch_plane, the scene builders, the world
previews, frames::to_local and auto_operation pass the error on; helpers answering "not
found" take the placed model from their caller. Commands setting a placement check it
(valid_position, exploded view, fastener at a point, STEP insert matrix).
ui: panels, picks and hovers read the session's placed model through
open_meshing::session_world; a model that cannot be placed shows no placed bodies, and the
viewport says why across its bottom. Pictures and the control channel report the error.
cli, mcp: snapshots, renders, benches and the oracle report the error; the kernel-case rig
records it as the case's failure. Tests read the new Results with unwrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Extent.corner is optional: unset, each profile preserves curvature where
every curve is a line or an arc and takes the tangent rule where another
curve has a corner, with a note in the feature's warning; a rule the user
gave is kept. draft_corners reports not_exact as the kernel builds (any
free curve in a cornered profile). Builds (release CLI); cases not yet run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel blends exactly the edges given; the feature's tangent_chain (default true, saved
only when false: pending format note blend-tangent-chain) expands each pick to its tangent
chain (kernel::tangent_chain) before the kernel call. A variable or spline round takes its
edge alone. Scripts and MCP passing one pick get the chain again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Extent.corner (preserve_curvature by default, tangent or round), saved
only when not the default (one pending format change), and the
solid.extrude `corner` parameter. draft_corner_options reports what each
rule gives at each corner of a feature's profiles, for a dialog to offer
the others where the chosen one is a poor fit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Owner's decision for strips whose rulings turn freely along their edge (a face's
normal along a free-form face, which was refused): the far edge is not the
offset curve but a B-spline the kernel defines, and the strip is exactly the
ruled surface between the edge and it.
The far curve has the edge's own degree, knots and weights (so the ruled NURBS
needs no knot merging); it runs from the strip's start corner to its end corner
(where the rulings at the edge's ends reach); its interior control points are
given (handles) or the least-squares solution of weighted terms, the
construction's parameters: closeness to the rulings' ends at the edge's
Greville abscissae (W_CLOSE), fairness by arc length (W_FAIR), each end leaving
along the chord to the other end (W_TANGENT, one small function), and at a joint
where the chain runs on smoothly with shared sides the first and second
derivatives by arc length matched to the neighbour's (W_JOIN), in one solve
along the chain, an exact neighbour's far edge matched as it is. Exact strips
are unchanged.
ruled_far_handles gives each free strip's default handles; ruled_surface_with
takes moved ones. The Ruled Surface feature saves them as `far` (per chain
edge, null for the default; pending format note ruled-far-handles), and
surface.ruled takes them as `far`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel has no boolean retries now, nor their diagnostics
(capture_boolean_diagnostics, BooleanDiagnostics, BooleanStrategy), nor the near-coaxial
crescent (coaxial_overlap, coaxial_candidate, with_attempt_budget). What read them goes:
- doc: FeatureResult and the evaluation cache carry no boolean diagnostics, and no "Boolean
retry" warning; the saved model no longer writes them (an older file's are ignored);
- engine: timeline.inspect / feature inspection drop `boolean_diagnostics`; fuzz runs and
the CLI fuzz summary drop their retry counts;
- inspect.interference: each pair is the bodies' Intersect, measured; the near-coaxial
crescent, the by-piece intersection of bodies in several pieces and the unverified notes
go (the command's doc no longer lists near_coaxial);
- inspect.clearance: an overlap is the bodies' Intersect, measured near its region; the pin
tries, the cut-down copies of large bodies (clipped, narrowed), the union cross-check
(union_disagrees, contradicted) and the malformed-part check (plausible) go, and the
measure near the origin passes its move's error on.
Tests: the retry test and the unit tests of the deleted checks are removed; the barrel join
test (tests/boolean_diagnostics.rs, now tests/barrel_join.rs) keeps its geometry checks;
the pin-in-bushing test expects the filleted case measured; assertions on empty diagnostics
and on near_coaxial are dropped; the corpus fixtures lose the diagnostics key and the one
retry warning.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
doc's FeatureResult has no boolean_diagnostics any more (truck's Boolean
retry reports, gone with truck; SMLib's boolean has no retries). The
timeline.inspect and doc.inspect replies drop the key.
Tests of the removed reports: tests/boolean_diagnostics.rs is deleted (it
checked truck's retry events and their survival through the cache, undo and
reopen); the assertions that a feature's report had no events go from
features_more_tests, patterns_tests, hole_face_tests and tests/rim_cut (the
rest of each test stays). The CLI corpus's expected replies
(move-bodies, issue-489-stacked-join, issue-616-lid-ribs) drop the key; the
issue-616 one listed a planar_fallback event. docs/robustness.md: its
section on retries becomes one on SMLib's booleans, which have none.
Left to the blends work: engine fuzz.rs (its retry-event counts) and
clearance/interference (capture_boolean_diagnostics, coaxial_overlap,
with_attempt_budget).
Not built: base in progress (kernel-smlib/no-truck 66ab6b7f does not build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
extend_surface keeps its signature, options and error messages. One model:
SMLib extends the surface past a side of the face's parameter box
(smlib_extend_sheet, CreateExtendedSurface: natural continues the end spans,
tangent G1, curvature G2) and the face stays one face on it, tagged so the
face is Modified and its sides keep their edges. Several picked sides grow
the box on each. Up to a target, the face is extended 50 body sizes past
its edge and trimmed back with trim_keep (SMLib's exact intersection),
keeping the piece the face lies in. Back to the bounds is untrim of the
picked edge's face, in place, with its holes; one already there is
refused. A plane's straight edges with neighbours lengthened still go
through surfaces::extend. Edges are picked on the schema 4 record (samples
of each edge's curve), an edge two faces share or of a hole refused as before.
Not ported (every far edge there was a cubic fitted through marched
samples, which the exact-B-splines rule forbids): an edge that is not a
whole side of its surface's box (trimmed edges, curved planar edges such as
a disc's, a notch), mitred corners on such faces, sides run square to the
edge on a non-box face, and bodies of more than one face. These now answer
"not supported yet: ...". Tangent and curvature no longer add a separate
run-off face: SMLib's G1/G2 extension is one face (the engine's
surface.extend description says so).
Tests ported keeping their assertions: the planar extension, the cylinder
strip along its axis, around and both (now an extruded arc, not a truck
revolution), the extruded strip, the parabola extended naturally (now a
conic extruded), back to bounds (the saddle from loft_sheet and trim),
hostile requests. Deleted, as what they test no longer exists:
neighbours_lengthened_or_square, self_intersecting_extensions_are_refused,
a_disc_grows_by_its_curved_edges, neighbouring_faces_extend_together, the
tangent/curvature run-off half of the B-spline test, and
a_continued_bspline_is_unchanged_on_its_range (the deleted continue_span).
SMLIB_REV: fork 9531966 (tags carried through untrim and extend).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
With no targets picked, an extrude's Join, Cut or Intersect changed every body
of the active component it met, shown or hidden: a hidden coincident copy was
joined in and disappeared. Where some bodies of the active component are
hidden, the shown ones become the feature's participants, kept with it, so
showing or hiding bodies later doesn't change the model. Explicit targets and
participants, and a face's or a face sketch's own body, still win.
Test: the issue's plate with a hidden copy and a rim joined on.
Main reached the same fix for Cut and Intersect in #3961 (its targets-based
shown_scope in extrude); this one, which also covers Join and keeps the shown
bodies as participants, replaces it. Its test stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A closed path was always followed from the start of its first picked curve,
wherever the profile stood on it. A profile drawn at the middle of a line was
then carried round the path standing off it by the distance between the two
(walls offset, the rounds turned the wrong way, on both kernels). Now the
closed chain begins where the profile's plane crosses it nearest the profile,
the curve there split in two (or at the joint there); open paths and paths
that already start on the profile's plane are unchanged.
Test: a 4 x 3 profile at the middle of the bottom line of a rounded rectangle
swept round it: Pappus volume and the tube within 2 mm of the path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
After a parameter edit, a feature's stored face point is moved onto the
face its name finds. That used the face's nearest point to the old pick,
which lies on the face's boundary whenever the pick no longer lies on the
face: a shell opened at the end of a bar picked (150,15,10), on the edge
it shares with the bottom face, so truck opened the wrong face and SMLib
refused the pick (#2531).
FaceHit::pick_point keeps the point where it still lies on the face clear
of its edges, and otherwise takes the face's nearest point among points at
least a margin inside its triangles (a few pick tolerances, capped at half
the roomiest triangle's inradius on narrow faces).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
With SOLIDCRAFT_KERNEL=smlib, kernel::measure and measure_mass take volume, area and centroid
from SMLib's Brep::mass_properties (integrated on the exact surfaces, accuracy 1e-8). The mesh
measure is still made, as an independent check. Where SMLib disagrees with it beyond the mesh's
own accuracy (1e-3; tangency-labs/solidcore#384), or can't take the body, the mesh measure
stands and the measurement says why. BodyMeasure and MassMeasure carry `measured_by` (smlib |
mesh) and `notes`, and inspect.measure shows both. The box and topology counts stay the mesh's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new crate (L1, only the kernel uses it) builds tangency-labs/smlib's SMLib,
SM_API and C API with the cc crate when its `native` feature is on, from the
commit in crates/smlib/SMLIB_REV (scripts/fetch-smlib.sh fetches just those
sources). The kernel's `smlib` feature turns it on. Without it nothing C++
is built and every call returns NotBuilt, so workspace builds need no C++
toolchain.
unsafe is confined to src/ffi.rs. The wrapper owns handles, maps statuses to
errors, checks the C API version, and sends SMLib's per-call log to the log
crate. Crash reports note the native kernel call in flight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Evaluation and placement never read appearances, yet an appearance edit
re-evaluated the model and placed every occurrence again. A whole-document
proof that only appearances changed now takes the existing render-only refresh,
which keeps the model and retargets the world-placement cache.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Sketch Transform: scale, turn and move sketch entities in one command and one undo
sketch.transform scales about a centre, turns about it, then moves; the window and its
handles for existing sketch geometry build on it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Transform window: one box with handles to scale, move and turn what is picked
Select curves and points in a sketch and press G (or Transform in the Modify panel or the
context menu): the picks get a box with a handle at each corner to scale (the opposite corner
stays), the box to move and a knob above it to turn (Shift snaps to 15 degrees). Position,
Width, Height, Scale and Angle in the window are the same values, to type exactly; OK applies
it as one step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Transform: follow the sketch field of Sel::SketchCurve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Each command that names a body (appearance, material, move, ...) mapped it to
its component's own name by working out every placed body's world name and
frame, so a command on a large assembly cost a walk of the whole design. The
list is now kept with the world-placement cache while it is current.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Naming a placed body scanned every occurrence and body of the design, so the
world state and every caller naming all placed bodies grew with bodies times
design size. WorldNames indexes the design once and names each body in time
proportional to its occurrence path; one naming routine serves both it and the
single-body scan. Names are unchanged (a test compares them with the scanning
implementation).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Move the design-link path helpers into one module
`component_link.rs`'s path rules for links to other design files (base_dir,
absolute, relative, stored, resolve, rebased) move, unchanged, into
`cmd/design_link.rs` with their test, so other kinds of link (#3891's drawing
files, linked parameters #5354, #5113's extract) share them instead of copying
or re-exporting them. No change in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* design_link: keep base_dir and relative private
Only design_link.rs uses them; the module's surface is absolute, stored, resolve and rebased (review on #5420).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* component_link: import Document after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Carel Theron <careltheron@Carels-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A cut (or intersect) that names no bodies went through every body it met,
hidden ones too: a body hidden to keep it out of the cut was cut anyway. When
some of the active component's bodies are hidden, the cut now stores the shown
ones as its targets, so the hidden bodies stay as they are, and stay so once
shown again (the model never depends on what is shown). With nothing hidden it
goes through every body it meets, as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Canvas to Sketch: trace a canvas image into a sketch on it (#3931)
New command canvas.to_sketch, offered as Canvas to Sketch in the canvas
context menu. It traces the canvas image (automatic Otsu threshold, light
drawings on dark backgrounds inverted) with interpolated marching squares
and Douglas-Peucker, and adds lines and cubic Bezier splines through Insert
SVG's add_geometry to a new sketch on the canvas plane, with the canvas'
width, centre, rotation and flip. Holes stay holes; one undo step.
The image's declared width x height is checked before decoding (at most
40 megapixels) and the decoder runs under image::Limits, since canvases
are capped by file size, not pixel count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new message to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2605
* Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443)
After the file is picked, an Insert SVG (or DXF) window sets the
drawing's X, Y offset and scale, with a live preview; OK adds it in one
step and Cancel adds nothing. The insert commands already took `at`
and `scale`; the window is what was missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert scenario: the picked drawing goes through the placement window (#2605)
`sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as
it was picked; it now checks the placement window first and adds it with
OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre
sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over
scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a
file's own size without inserting it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle
Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing
about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing
The preview gets its box with a handle at each corner (scales about the opposite corner,
aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees).
They edit the same X, Y, Scale and Angle the window shows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert handles: the move that comes with the release counts
A quick drag could stop short of the pointer's last position because the final move arrives
in the same frame as the release.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Insert SVG / DXF: the Drawing Size command's label in the catalogs
`sketch.drawing_bounds` came without a catalog entry, which the i18n
test requires (and the complete ja and zh catalogs with it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new messages to a pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2113
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crash reports: capture native crashes on macOS (#2113)
A signal handler for SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP and SIGABRT
writes the same <journal>.native.json as the Windows exception filter: the
signal, the faulting module and offset, the thread and a frame-pointer walk.
The next start reports it instead of "an unclean exit". The signal then goes
on to the previous handler or the default action, so macOS still writes its
own crash report.
native_crash_macos.rs joins the crash-safety skill's list of files that may
use unsafe (no safe API can catch these signals).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>