Commit Graph
34 Commits
Author SHA1 Message Date
Kushagra Kumar 446590dca1 fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748) (#10792)
* fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748)

* ci: refresh checks to clear cancelled workflow run
2026-11-01 21:00:44 +00:00
fkirillandKirill Frolov 1b927421f6 Restore Browser and source-body context during Extrude editing (#5573) (#5576)
* claim: #5573

* Keep Browser and source bodies in the Extrude edit context (#5573)

* fix: keep Browser feature rows after manual rollback

---------

Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
2026-10-30 22:03:03 +00:00
Kai Evans f1c2f67d63 Quick measurement: the selection's length, area or distance in the view's corner (#7000) (#7513)
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)

With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.

* Quick measurement: off by default, turned on under Preferences > Interface (#7000)

The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
2026-10-30 15:46:01 +00:00
02ac56d12f Feature windows choose Join, New Body or Cut from what the material touches (#6901) (#6903)
* claim: #6901

* Feature windows choose Join, New Body or Cut from what the material touches (#6901)

Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join

Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preference: Choose the operation automatically (on by default)

Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference

Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: a closed window's check stops; the icon audit doesn't choose

A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Box placement test: the window keeps its New Body

The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Join pieces: read the target lists leniently after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 19:57:27 +00:00
98abb249c4 Cylinder: place by distances from reference edges, like Hole (#6380) (#6381)
* claim: #6380

* Cylinder: place by distances from reference edges, like Hole (#6380)

A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.

In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: Edit Feature shows each reference edge input once (#6380)

A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder references: the measured-once cost test's cylinder has none (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: pick the face it stands on in its window, then the edges (#6380)

The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder edge references: the Cone dialog (#6250) gets the references field too

The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 19:28:22 +00:00
amolinari-autotex 47285ccb88 Thread: right- and left-handed direction (#4414) (#4415)
* claim: #4414

* feat: persist right and left thread handedness (#4414)

* fix(thread): verify handedness with referenced holes and complete locales

* test: verify handedness with merged tapped thread catalogues

* test: retain tapped thread depth when changing handedness (#4414)

* test: restrict Unix symlink coverage to Unix targets

* test: inspect hole thread depth inside edit command parameters (#4414)

* test(doc): initialize cylinder radius in handedness fixture
2026-10-26 13:57:08 +00:00
froglemonade2andClaude Opus 5.5 e063a7778e Axes and points from circular edges and round faces (#3128) (#4610)
* Axes and points from circular edges and round faces

In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.

Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.

Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format the round-pick hover check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Selection chips: name a round pick as a circle centre or axis

The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move: a circle's centre in a placed component is where the component shows it

Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Plane at Angle on a planar face about a model edge: test that it follows both

Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:27:32 +00:00
Victor Santos Oliveira 91638cb1f3 Add practical command guides and a contribution template (#5237) (#6772)
* claim: #5237 command-level guide follow-up

* docs: add practical command guides and resource contributions (#5237)

* docs: index practical guides and reject incomplete command links
2026-10-26 12:24:23 +00:00
Jesper We bbc3aa4301 Offset Plane: through a point (#3765)
* claim: Offset Plane through a point

* Offset Plane: through a point instead of at a distance
2026-10-25 06:02:14 +00:00
raykholo 59795872f6 Extrude: document which way a positive taper goes (#4098) (#4115)
* claim: #4098

* Extrude: document which way a positive taper goes (#4098)

A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
2026-10-24 21:27:34 +00:00
JacquesandClaude Opus 5.5 807e367bdb Hole: place a Single hole by distances from reference edges (#37) (#2931)
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.

In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 05:32:30 +00:00
JacquesandClaude Opus 5.5 400e06c202 Hole: snap to face and round-edge centres, drag placed holes, section in the dialog (#2171) (#2912)
Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no
way to move it but taking it out and picking again; the dialog was a list of size fields.

- Preferences › Design › Create Hole has two settings, both off by default, so a new installation
  places holes as before:
  - Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its
    middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as
    marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named.
    Sketch points on the face still come first; Alt or Ctrl held places it where clicked.
  - Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it
    (snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face
    moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047).
- The Hole dialog draws a section of the hole as its options make it, with each size in a field
  beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a
  new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 05:25:56 +00:00
FrankandClaude Opus 5.5 fc3e3b6c8d Join: say so when the joined piece doesn't touch the body (#4434) (#4436)
* claim: #4434

* Join: say so when the joined piece doesn't touch the body (#4434)

A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken,
boundary fill, surface network) whose material meets none of its targets
still joins it to the first target as a separate piece. The result stays
as it was; the feature now warns: "the joined piece doesn't touch `Body1`,
so `Body1` is now in 2 separate pieces (New Body makes it a body of its
own)". History marks it and the command reply carries it.

The check compares pieces (outer shells, not voids) of the bodies the
feature changed or absorbed before and after it, so it holds for the
batched multi-profile path too, stays quiet for a join that bridges
pieces or closes a cavity, and leaves Combine (which joins the bodies it
is given) alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 04:13:31 +00:00
1ed394f8d6 Extrude: picking a face, vertex or parallel plane off the profile switches the extent to To Object (#2855)
* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object

With profiles picked, a face off their plane (or curved), a vertex off it, or a
construction plane parallel to it is taken as the To Object target instead of
another profile: the extent switches without the Extent Type choice, and the
distance shows how far the target is. Coplanar faces still join the profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: automatic To Object is a Preferences setting, off by default

Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default
false) turns the automatic To Object on. Off, picks in the Extrude dialog only add
profiles and the distance is not synced to a target, as before this change.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-23 22:03:23 +00:00
Colin Faulkinghamandbherbruck fa3ada1983 claim: #2708 (#2739)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:25:05 +00:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
NOWN-DEV d0a4443939 inspect.compare: where two versions of a part differ, without a boolean of the two (#1423)
New command inspect.compare {a, b, tolerance?}: measures of both and their differences, two-way surface deviation from a bounding-volume tree, regions beyond the tolerance clustered by side (only_in_a / only_in_b) with integrated volumes and faces, a verdict, optional face colouring as one undo step, and warnings for open meshes. Geometry in solidcraft-geom (compare.rs), command in the engine. Closes #1363.
2026-10-15 12:45:43 -04:00
Karl Von RichterandKarl-VonRichter 1ec33fcdc7 Extrude: a symmetric distance is the total thickness (#1260)
A symmetric solid extrude of 10 mm is now 10 mm thick, 5 mm each side of the sketch plane, and switching from One Side to Symmetric keeps the thickness entered. Under format 21 the extent records its convention; designs saved without it keep the per-side reading, so their geometry and parameters don't change. Fixes #1236.

Co-authored-by: Karl-VonRichter <Karl-VonRichter@users.noreply.github.com>
2026-10-15 01:19:55 -04:00
NOWN-DEV 5c6f70cc00 Faces by name in the face commands; model.faces gives a point on each face (#1243) 2026-10-14 20:18:13 -04:00
phanoob beb3ea01e7 Taper: the review of #1014 (spline sides follow their offset, no silent limits, face names kept) (#1204)
Taper: the review of #1014 (spline sides follow their offset, no silent limits, face names kept).
2026-10-14 17:55:58 -04:00
Lasse Lian 6df69e9def Thin Extrude: walls of a set thickness along sketch curves (#721) (#991)
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes #721.
2026-10-14 11:46:16 -04:00
phanoob 4dbc0efff9 Taper any profile, sketch text included (#1014)
A tapered extrude now offsets spline and conic curves as well as lines and arcs, so sketch text and any other profile can take a taper, and the join of tapered letters onto a face finds its boolean result.
2026-10-14 09:47:44 -04:00
midasdfandmidasdf 6e84c03946 Curvature-continuous (G2) fillets for straight planar edges (#862)
Fillet gets a Curvature (G2) radius type (type: "curvature", alias "g2"): a quintic blend whose size is the equivalent circular setback, for convex and concave straight edges between planar faces with a perpendicular planar end face at each end. Unsupported cases are refused rather than falling back to a circular fillet, and a blend that would cross a loop in its end face is refused. Persisted as a fillet style under format 19; labels in en/de/ja/ko/zh.

Co-authored-by: midasdf <midasdf@users.noreply.github.com>
2026-10-14 04:26:53 -04:00
semmelrindeandClaude Opus 5.5 dbfb689f6c Single-hole snapping takes only shown points and checks the face once per pick (#798)
Follow-up to #718: a face place snaps only to sketch points that are shown, and the face under the cursor is looked up once per pick.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:28:54 -04:00
semmelrindeandClaude Opus 5.5 831fa34752 fix(ui): a Single hole picked at a sketch circle's centre goes to the centre (#657) (#718)
A Single hole picked on or near a sketch point that lies on the face (a circle's centre) now goes to that point, as a Multiple pick does. Picks away from sketch points, or near one that isn't on the face under the cursor, stay where they were clicked. Fixes #657.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:43:47 -04:00
4d4b3a715f Create construction planes along drawn 3D sketch paths (#240)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:44:19 -04:00
lillith 56b499e951 Reject invalid explicit axis origins instead of using zero 2026-10-12 09:51:58 -04:00
bherbruck 4e595deff2 feat: preserve adaptive sketch profiles and curved modeling workflows 2026-10-11 09:06:25 -04:00
bherbruck f9d61590f3 Merge pull request #120 from CypherNaught-0x/feat/timeline-inspect
timeline.inspect shows a feature's editable fields; the timeline.edit format is documented
2026-10-11 07:11:49 -04:00
CypherNaugh_0x adb1e5fec5 timeline.inspect returns a feature's definition in the shape timeline.edit's set takes, so agents no longer guess field names: timeline.edit had no documented format ({"extent": {"distance": …}} worked, but only by trying). The new read-only command (feature: id or name) returns type, definition (the editable fields and their current values; bookkeeping and large payloads such as sketch geometry and imported STEP text are left out and listed under omitted), inputs (label, parameter name, expression, unit) and the feature's error and warning. timeline.edit's params doc points to it, and the book's Solid features chapter documents the edit format with the fields of the common features. Tests: inspect, edit by the field names it shows, inspect again (extrude, fillet, sketch); no undo step; hostile feature arguments are refused 2026-10-11 12:23:30 +02:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck 0398a813c8 feat: strengthen sketches, feature editing, and independent assemblies 2026-10-11 02:44:31 -04:00
bherbruck c1b6478ab5 fix: join additive extrusions and merge coplanar faces 2026-10-10 21:31:19 -04:00
bherbruckandClaude Opus 5.5 0d7e456bc1 Documentation site and CI workflows
An mdBook under docs/book: a user guide (getting started, UI tour, sketching, features,
parameters, components and joints, sheet metal, plastic, files, shortcuts, MCP) and a developer
guide (CONTRIBUTING, architecture, command engine, kernel boundary, persistent naming, test
harnesses, and the existing docs/*.md pages). `cargo xtask book` generates the command reference
from `solvecraft-cli commands` and renders the screenshots with `solvecraft-cli snapshot`, then
runs mdbook. .github/workflows/pages.yml publishes the book at /solvecraft/ and the web app at
/solvecraft/app/ (skipped while the repository is private). .github/workflows/ci.yml runs
`cargo xtask ci` on pull requests. README and Help → Documentation link to the book.

Fixes #28
Fixes #8

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 13:25:38 +00:00