Commit Graph
2292 Commits
Author SHA1 Message Date
lillith 3fb2eef92d wip(dxf): certify full round-wall outlines (#5318)
Targeted doc suite 390 pass/0 fail/1 existing ignore; sheet suite 198 pass/1 known trimmed-cap failure/1 existing ignore; view DXF 14 pass/0 fail and 53 original byte pins pass. Full CI and strict Clippy/wasm on this WIP are still pending. This commit preserves a reviewed partial improvement; do not mark PR #6184 ready.
2026-10-27 00:27:04 +01:00
lillith 0ff4438c32 wip(drawings): preserve X1 candidate for focused sheet diagnosis
Current focused validation: geom and IO passed; 53 original export byte pins passed; seven sheet tests failed. View-DXF, Clippy, wasm and full CI have not run. Preserve this unqualified work while the team takes the W38d owner handoff. No golden or assertion changes.
2026-10-26 12:43:08 +01:00
lillith 48093730fa Merge existing X1 claim into frozen Drawings batch 2026-10-26 11:23:36 +01:00
lillith 237c94854f test(dxf): pin original flat-pattern export bytes
Pin 53 original outputs before the shared path conversion: DXF, shape JSON and refusal text. Preserve all existing semantic checks and use native nonignored SHA-256 and length assertions without recording or filesystem fixtures.

Validation: engine format check, ordinary engine library build, and exact permanent byte regression passed. Full repository validation follows the coherent X1 batch.
2026-10-26 11:23:10 +01:00
Colin Faulkingham 0312808b92 DXF: reject non-BMP text instead of replacing it (#5056) (#5709)
* claim: #5056

* fix: reject unsupported Unicode in DXF text (#5056)

* fix: adapt new DXF callers to fallible writer (#5056)
2026-10-25 11:01:32 +00:00
9d45fa6b34 Respect design units across length fields (#3271) (#3315)
* claim: #3271

* fix(ui): use document units across length fields (#3271)

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Adapt drag-extrude and joint tests to document-unit length helpers

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(ui): preserve blank parameter drafts and cover bounded lengths

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 10:24:30 +00:00
e4f11c8df6 Preview angled construction planes (#5697)
* Preview planes at an angle

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Plane at Angle: test the preview when an existing plane is edited

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* ui: include ghost setting in plane preview test

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* test: close angle plane regression test block

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 10:04:57 +00:00
Jesper We bbc3aa4301 Offset Plane: through a point (#3765)
* claim: Offset Plane through a point

* Offset Plane: through a point instead of at a distance
2026-10-25 06:02:14 +00:00
Jesper We 611d4eb6b8 Crash reports: a repeated panic that ends the app is counted, not reported as an unclean exit (#6051) (#6052)
* claim: #6051

* Crash reports: a repeated panic that ends the app is counted, not reported as an unclean exit (#6051)
2026-10-25 06:00:57 +00:00
Kai Evans c50f5364c6 Selection fields: only the active one looks active (#5256) (#5259)
* Selection fields: only the active one looks active

* Selection fields: a filled field keeps its tinted border where a theme fixes the control border's colour
2026-10-25 05:47:23 +00:00
beb38b44aa Select Other: Shift and Ctrl add the choice to the selection, as a click does (#5258) (#5261)
* Select Other: Shift and Ctrl add the choice to the selection, as a click does

* Select Other: follow origin visibility rename in test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Select Other test: click away from the lines' midpoints, which are picks of their own now

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 05:47:20 +00:00
Ahmad Khan a49698ee3d Value fields step with the arrow keys and the mouse wheel (#2320) (#2608)
* claim: #2320

* Value fields step with the arrow keys and the mouse wheel (#2320)

Up/Down in a focused value field step a plain number by 1 in the unit it is written in
("20 mm" -> "21 mm", "2,5 mm" -> "3,5 mm"), 10 with Shift and 0.1 with Alt; the wheel over
the focused field does the same, a step a notch, instead of scrolling the panel under it.
Expressions such as `width / 2` are left as typed, and an open completion list keeps the
arrows. Every expression field gets this through `params_dialog::complete`: the value box
beside the geometry in every dialog, the dialog rows, sketch dimensions, the dimension
editor, Drive Joint and the Parameters window.

* The value box beside the geometry stays under the pointer

The box rides on the arrow's tip, so each wheel notch that stepped its value moved it, and
after a notch or two the box slid out from under the pointer and the wheel zoomed the view
instead. While the pointer is over it the box now keeps its place, and it goes back to the tip
when the pointer leaves.

* Value stepping is a preference, off by default

Preferences › General › "Step values with the arrow keys and the wheel" (`step_values`,
also through `ui.prefs`) turns on Up/Down and wheel stepping in value fields, and the value
box staying under the pointer while the wheel steps it. Off, as by default, value fields
behave as before: Up/Down move the text cursor, the wheel scrolls, and the box beside the
geometry follows its arrow.

* Value stepping test: Bend Radius is under Advanced now

* Value stepping test: the preference is on the Design page

* Value stepping test: draw the field straight into the test's frame (#2320)

The shared outer-host rule now covers tests too; the field needs no panel around it.
2026-10-25 05:34:03 +00:00
Ahmad Khanandbegsaquib 919f54a23e Sheet metal: bend angles as the included (press-brake) angle, set per rule (#4968) (#6040)
* claim: #4968

* Sheet metal rules: bend angles as the included angle (#4968)

A sheet metal rule's angle_display (bend, the default, or included) sets
how the DXF bend notes read each bend: a 58° bend is B1 UP 122° R1 under
an included rule. The bend table always gives included_angle_deg beside
angle_deg (CSV and JSON). Set in sheet.manage_rules and the Sheet Metal
Rules dialog, listed by sheet.rules; the flange angle stays the bend angle.

* Bend table: the included angle as the CSV's last column, so the columns before it keep their places (#4968)

A test also covers a body whose base flange names its rule, which keeps that rule's notes whichever rule is active, and a bend down.

* Sheet Metal Rules: Angle Display reads Bend or Included, so the choice fits its box (#4968)

The rule editor's row contract lists the new row and the key the dialog sends.

---------

Co-authored-by: begsaquib <saquibbeg4444@gmail.com>
2026-10-25 05:11:13 +00:00
1d0e371e64 Preserve lid edge references after parameter changes (#5580) (#5658)
* claim: #5580

* fix: follow named lid edges after parameter changes (#5580)

* fix: initialize viewport test frame tints

* Drop duplicate tint fields in gpu view tests (main already has them)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 05:04:24 +00:00
Matt Van Horn 43565cd33b Snap drawing to where two sketch curves cross (#4967) (#5342)
While drawing, the pointer snaps to the crossing of two lines, circles or
arcs and keeps the new point on both curves. Shift still prefers a midpoint.
2026-10-25 04:50:20 +00:00
raykholo ab9d9ac50f Manage > Units opens the unit picker (#5907) (#5908)
* claim: #5907

* Fix Manage Units to open the shared unit menu (#5907)

Open the browser's existing unit choices for interactive command starts
instead of executing document.units without its required parameter. Anchor
the menu below toolbar buttons and menu rows. Choices still run the normal
command, while programmatic calls require an explicit unit.

Cover error-free opening, unit choices, button anchoring and dismissal,
the current-unit marker, one-step undo/redo, and programmatic calls.

Fixes #5907
2026-10-25 04:35:33 +00:00
rbousigues88andClaude Sonnet 5.5 157c0d68d0 Sketch Dimension: point/circle to circle or arc edge (#4064) (#4065)
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)

Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.

Fixes #4064.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Dimension scenario: pick the circle at its top edge (#4064)

The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 04:29:28 +00:00
38d7ea4198 Agent chat: each design tab keeps its own conversation (#5439) (#5612)
* claim: #5439

* Agent chat: each design tab keeps its own conversation (#5439)

* Adapt chat-per-tab changes to the new Pending context and cursor tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 04:20:54 +00:00
dudedagger42andClaude Opus 5.5 7c2b2f1559 Revolve takes a planar body face as its profile (#2747) (#5170)
solid.revolve already revolves a planar body face (`face`, `face_body`), but
the Revolve window's Profile input took sketch profiles only, so a face
couldn't be picked. The input now takes planar faces too, and a picked face
is sent as `face`; sketch profiles win when both are picked.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 04:06:08 +00:00
raykholo cc1e654690 Warn when a design is open elsewhere or changed on disk (#5467) (#5468)
* claim: #5467

* Warn when a design is open elsewhere or changed on disk (#5467)

The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.

A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.

Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
2026-10-25 03:34:20 +00:00
raykholo 7af97e3729 Editing an Extrude or Revolve shows its sketch (#5336) (#5443)
* claim: #5336

* Editing an Extrude or Revolve shows its sketch (#5336)

A finished sketch is hidden once a feature uses it, and it stayed hidden
while that feature's dialog was open for editing, so no other profiles
could be picked. The session now holds the sketch of the feature being
edited; the edit dialog sets it while it is open and clears it however
it closes, and that sketch is drawn without changing stored visibility.
2026-10-25 03:26:36 +00:00
raykholo 138bb0261c Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063) (#4403)
* claim: #2063

* Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063)

On Windows with only OpenGL to start, the window opens with the system
title bar instead of using the application bar as its title bar. The
window without OS decorations keeps its caption style while having no
frame, and some OpenGL drivers (older Intel HD/UHD) show the picture a
caption's height lower than the window, so clicks land above what they
point at. Direct3D 12 and Vulkan keep the custom title bar.

The choice is made before the window opens, from the backends wgpu
starts, so the window never changes its frame while OpenGL draws into it.
2026-10-25 03:19:34 +00:00
raykholo dbe7dfa4bc Report a bug: title from the workspace and the reporter's words (#5377) (#5445)
* claim: #5377

* Report a bug: title from the workspace and the reporter's words (#5377)

With no dialog open the report was always labelled "Modeling" and its
summary pre-filled as "unexpected result", so every such report arrived
titled "Modeling: unexpected result" and the fallback to the first line
of "What happened?" never applied.

Label the report from the active workspace (Part, Sketch, Surface, Sheet
Metal, Plastic, Mesh, or Render), leave the summary empty so the title
becomes "<workspace>: <first line of the description>", and keep
"operation failed" when an error was recorded. The summary field now
hints that a short title is optional.

The triage script that asks for an empty in-app report to be pasted
recognises the new titles.
2026-10-25 03:03:08 +00:00
bherbruckandClaude Opus 5.5 1ceab2ed4c One file per change for new UI strings and attribution rows (#6448)
New UI strings go in assets/locales/pending/<slug>.json and new ATTRIBUTION.md rows in
attribution/pending/<slug>.md. The app build, xtask lists/i18n/assets read them as part of the
catalogs, and the Generated files workflow folds and deletes them on main with
cargo xtask fold-pending.

Refs #6439

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 03:01:41 +00:00
wckdboyandClaude Opus 5.5 743accca7a Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031) (#5409)
* claim: #4031

* Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031)

A trimmed face's boundary segment that crosses a constraint already in the
triangulation went to spade's add_constraint_and_split, which asserts
(cdt.rs:978, `!previous_region.is_empty() || from == final_vertex`) when a
split lands so near another vertex or constraint that the piece up to it is
blocked. The kernel guard caught it, but the whole operation failed and a
crash report was written; a STEP body imported empty or not at all (#4598,
also #4293, #4478, #5068, #5229).

PolyBoundary::add_constraints now adds every segment that can be added, then
splits each blocked one itself: a vertex at each crossing, inserted from the
crossed edge's own vertex, and the pieces between added where they can be. A
segment with crowded or very many crossings, or a face with more than four
blocked segments (a rim that runs back and forth across itself), leaves them
out, as truck did before #1653, so the face meshes slightly off instead of
not at all. Pinched faces (#1648) still split where they cross.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:55:24 +00:00
bherbruckandClaude Opus 5.5 128692da0c Agent chat: no per-message limit by default (#6349)
* Agent chat: no per-message limit by default

The limit is optional now: an Unlimited checkbox on the AI page (checked by default), a
number field when unchecked. A saved 24, the old default, reads as unlimited. The API-key agent's
24-request and the gate's 400-request caps are gone; Stop still cancels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: add the new messages to the complete Japanese and Chinese catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:54:13 +00:00
rbousigues88andClaude Opus 5.5 13b4f6e98c Viewport: a selected edge's highlight no longer shows as a wedge on a grazing face (#3544)
* Viewport: lift selected and hovered edge highlights toward the eye

A selected edge's highlight (3 px core, 6 px halo) is a screen-space band that
was depth-tested at the edge's own depth. A face next to the edge seen at a
grazing angle is pushed back by only about a pixel of its slope, so it buried
part of the band, unevenly along the edge: the highlight showed as a thin
wedge instead of a line.

The band is now drawn like a thin cylinder around the edge: its depth is
pulled toward the eye by half its width plus a pixel, measured on screen so
it holds at every zoom. Plain model edges keep their depth (#1434 still
holds); the part of a highlighted edge the model really hides stays dimmed
through hidden_line.

Not yet compiled or tested.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: lift an edge highlight by how steeply its faces are seen

The first lift (half the band's width plus a pixel, the same on every edge)
was not tied to the faces beside the edge. Each highlight segment now carries
the normals of the two faces it borders (octahedral, packed with its width in
the line's width slot, read as u32 by vs_line): the band is pulled toward the
eye by its half width times how steeply those faces are seen, so a grazing
face no longer buries it, and an edge seen square to its faces is not lifted
at all.

Test: a_selected_edge_on_a_grazing_face_draws_whole (tilts 60 to 88 degrees,
small and large designs, orthographic and perspective; the band 5 mm behind
a face stays hidden). Capturer::rgba_highlighted draws a highlight scene as
the viewport does, for that test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:48:34 +00:00
raykholo ac53fc1e6f Viewport: bodies stay visible after switching to perspective and back (#5422) (#5614)
* claim: #5422

* Viewport: bodies stay visible after switching to perspective and back (#5422)
v0.22.0-nightly.20261025.78.1
2026-10-25 02:46:59 +00:00
Homero Thompson 8d63a9f4cb Theme: the viewport keeps the previous colours until the camera moves (#5802) (#5835)
* claim: #5802

* fix: repaint on a theme change and key the frame cache on the theme tints (#5802)

theme::apply asks for a repaint, so the new visuals are painted on the next pass instead of waiting for another event to schedule one. The gpu frame cache key now includes the theme's hover and selection tints, so a picture cached under the previous theme's colours is not reused.

* test(ui): settle egui's startup repaints before asserting the theme's repaint (#5802)

* test(ui): name the call site that asks for the theme's repaint (#5802)

* test(ui): apply the theme outside a pass so its repaint request stands alone (#5802)
2026-10-25 02:46:41 +00:00
bherbruckandClaude Opus 5.5 a150822d9b Put solidcraft-cli on PATH from the AppImage and the macOS app (#6347)
The AppImage writes a ~/.local/bin/solidcraft-cli launcher from its desktop-integration step
(same opt-outs, never over a file it did not write). The macOS app links the CLI into
/opt/homebrew/bin or /usr/local/bin at launch when one is writable, and Help > Install
solidcraft-cli command does it with an administrator prompt otherwise. Snap and Flatpak are documented.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:45:45 +00:00
raykholo a9fd4b1b05 A dragged command window keeps its place (#5357) (#5444)
* claim: #5357

* A dragged command window keeps its place (#5357)

Command dialogs share one dragged offset per dock side for the session
instead of one per title, and closing a dialog no longer forgets it, so
the next command opens where the last one was left. The offset is still
kept inside the viewport, including after the window shrinks.
2026-10-25 02:38:48 +00:00
amolinari-autotex face5e2d31 Hole: independent tapping depth and recessed drill points (#4486)
* feat(hole): checkpoint independent tapped thread depth

* test(hole): cover independent tapped thread depth boundaries

* fix(doc): bind tapped depth to the useful cylindrical wall

* feat(hole): dimension independent thread depth in the section editor

* fix(hole): preserve custom tapping controls after main integration

* feat: add recessed-hole drill points and order depth dimensions

* fix(hole): match the current preferences and UI kit

* fix(hole): verify reference placement with independent tapping depth
2026-10-25 02:31:24 +00:00
Benny1496 efd0e70f7d fix(oracle): use curvature-weighted centroid moments for case 33 (#5442)
* fix(oracle): use curvature-weighted centroid moments for case 33

* style(oracle): preserve reference JSON numeric formatting

* docs(oracle): remove transient case 33 validation note
2026-10-25 02:30:39 +00:00
SiroArtandClaude Sonnet 5.5 3f4c6e4571 Display refinement waits until the camera stands still (#3595) (#5446)
Choosing and swapping in a refinement rebuilds and uploads the whole model
scene. During an orbit of a large assembly that happened about ten times a
second, tens of milliseconds each. It now waits until the camera has stood
still for 200 ms.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 02:30:36 +00:00
rvmzym5xv8-starandClaude Opus 5.5 abc39685b1 Parameters: name the limit an out-of-range number or over-long expression broke (#5906)
Part of #4712.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:30:04 +00:00
Colin Faulkingham f93913b3d3 Sketch: accept curve snaps for Midpoint Line (#5981) (#6041)
* claim: #5981

* fix(sketch): resolve midpoint line snaps (#5981)
2026-10-25 02:29:47 +00:00
ivisafandClaude Opus 5.5 765c5fd143 Pictures drawn off the window thread finish before the process exits (#6062) (#6063)
A Home picture still being drawn by the detached saved-thumbnail thread
could be on the GPU as the process exited, and the process died with
SIGSEGV inside the graphics driver. capture::close stops new pictures
and waits for those in flight (the app calls it in on_exit), and
dropping SolveApp waits for the Home picture threads it started.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:40 +00:00
Colin Faulkingham 6494f8fe18 AutoConstrain: dimension construction geometry (#6173) (#6185)
* claim: #6173

* fix(sketch): dimension construction curves in AutoConstrain
2026-10-25 02:29:37 +00:00
selune 1623034973 Render: gate bundled studio-data tests in isolated engine builds (#5493) (#6202)
* claim: post-merge Render review corrections (#5493)

* fix(render): gate bundled studio tests in isolated engine builds (#5493)

Addresses jyviko review comments on #5494: compile the two positive payload-dependent regressions only with bundled-render-library. Keep all assertions and the explicit feature-absent refusals. Reproduced 5 pass / 2 fail before the fix; isolated default, CPU without pack, and CPU with pack tests plus strict scoped Clippy and repository checks pass. No production or CI configuration changes.
2026-10-25 02:29:34 +00:00
NOWN-DEVandClaude Opus 5.5 74004841b4 Sketch text: a text on a path follows the path in the same evaluation (#6215)
* Test: a text on a path follows the path when a parameter moves it

A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch text: a text on a path follows the path in the same evaluation

Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.

Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:31 +00:00
NOWN-DEVandClaude Opus 5.5 be08517de2 Construction: a plane on a sheet's flat face follows the face (#6217)
* Test: an offset plane on a sheet flange's face follows the flange

An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: a plane on a sheet's flat face follows the face

Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.

Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:28 +00:00
NOWN-DEVandClaude Opus 5.5 24ed21998b Configurations: a design keeps up to 2048 rules (#6221)
* Test: a design keeps several hundred configuration rules

An assembly that switches a few hundred parts on and off, by two rules each, needs hundreds of
rules; the saved-rule budget refused more than 128.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Configurations: a design keeps up to 2048 rules

Problem: a configuration table kept at most 128 rules. A rule drives one feature's suppression,
so an assembly that switches a few hundred parts on and off (by two rules each) could not keep
its rules. Copying rules for an independent component copy looked up each new id by scanning all
rules, which a larger table makes slow.

Solution: MAX_RULES is 2048; a copy looks its new ids up in a set of the ids taken. The docs say
the new limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:25 +00:00
NOWN-DEVandClaude Opus 5.5 3592031d5e fix: joints on an imported part's hole or face stay on that part (#6368)
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.

named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:16 +00:00
NOWN-DEVandClaude Opus 5.5 b8d9db7440 fix: a face-centre joint origin stays put when a hole in its face moves or goes (#6370)
A joint origin at a face's centre (`joint.origin {face}`, `Snap::FaceCenter`) was the face's
area centroid, holes included. A hole cut into that face, moved or suppressed therefore moved
every part held at the face's centre, though the face's outline stayed where it was: on a
200 x 100 plate with a 20 mm hole, 0.31 mm for each 20 mm the hole moves and 0.62 mm when the
hole, 40 mm off the middle, is suppressed.

On a planar face with holes the origin is now the middle of the area the face's outer boundary
encloses (`outline_centre`: the face's triangle sides that no other triangle of the face runs
back along, corners matched by place, chained into loops in the face's plane; the centroid of
the loop enclosing the most area). A named face (`NamedFace::plane`) and the planar face
nearest a point (`nearest_plane`) both use it. A face without holes, or one whose mesh gives no
clean outline, keeps its centroid as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:14 +00:00
NOWN-DEVandClaude Opus 5.5 2b620338df perf: solve the joints once per parameter change (#6372)
A parameter change evaluates the model and solves the joints inside the
command (so that it can refuse a value that breaks a sketch), and
`Session::execute` refreshes again after the command and solves every joint a
second time, although nothing has moved since. On 40 small parts jointed
rigidly to a plate's holes (half of the joints lifted by an expression),
changing the lifts' parameter took 0.85 s on main and takes 0.45 s now;
changing one part's thickness, 1.96 s and 1.52 s (CLI, medians of 5 runs).

The session now keeps the design the joints were last solved for, as the
solve left it, and the model that solve read. A refresh that finds the same
model, and a design that differs from the solved one at most in its features,
leaves the joints as they are: the joints read features only through the
model, and a value edit stores the new solutions of the sketches it drove
after its solve, so its design is a new one by the time of the second
refresh. Placements and bounding boxes come out identical.

Test: `a_parameter_change_solves_the_joints_once` counts one solve per change
(two before), checks the jointed part still follows the hole, and that a
captured move of a jointed part is still solved back.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:11 +00:00
NOWN-DEVandClaude Opus 5.5 a5b6408587 fix: an edge joint origin on a body placed by an offset lands on that edge (#6374)
An edge joint origin looked its edge and face up in the body's own coordinates with the pick in the component's,
and returned the frame in body coordinates. On a body placed by an offset (an imported part's bodies are) a pick on
the edge where it is shown found no edge ("joint origin: no edge there"), or the origin sat away from its edge by
the offset. Edge origins now take the picks into the body's coordinates through the inverse of its offset and place
the frame back by it, as named faces and round origins already do. A body without an offset is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:08 +00:00
bherbruckandClaude Opus 5.5 78de687902 CI: duplicate-PR check and a 'Changes a default' line (Refs #6439) (#6442)
* CI: duplicate-PR check and a required 'Changes a default' line (Refs #6439)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* PR checks: enforce the defaults line only on PRs opened from 2026-10-25 (Refs #6439)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:28:57 +00:00
bherbruckandClaude Opus 5.5 2741cd9a8b Section Analysis: edges behind the cut no longer show through the cap (#6328) (#6363)
Since #1768 the section's stencil marking draws every face with FACE_BIAS.
Where a back face seen through the cut meets a front face along an edge (a
pocket's wall and its side wall or floor, a fillet and the face it runs
into), the slope push decided which was nearer beside that edge; a front
face winning left those samples unmarked, the cap skipped them, and the
edge, drawn at its own depth, showed through the hatch. In perspective, and
while orbiting in orthographic too, edges popped in and out from frame to
frame.

A second marking pass draws the back faces only (front faces culled, depth
test <=, no depth write), pulled toward the eye as far as FACE_BIAS pushes
faces back, before the cap. The depth buffer keeps FACE_BIAS, so edges on
visible faces still draw whole (#1434).

Tests in crates/gpu/tests/depth.rs: a pocket 2 mm behind the cut, and a
filleted hub with a bore and a cross hole seen from twelve directions, both
depths, orthographic and perspective. On main the pocket shows 45 px of
edges through the cap in perspective and the hub 25 px over the views; with
this change 0 and at most 2.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:03:31 +00:00
raykholo 86f5500914 Sketch: arcs and circles honour construction when they are created (#5352) (#5440)
* claim: #5352

* Sketch: circles and arcs honour construction (#5352)

sketch.arc.center_point, sketch.arc.three_point, sketch.circle.two_point,
and sketch.circle.three_point accepted construction: true but drew normal
geometry. They now mark the new curve as construction, like lines and
rectangles, and their parameter docs list construction?.
2026-10-25 01:56:44 +00:00
DuBearteandClaude Opus 5.5 7804f9938a Intersection curves: a point that won't project no longer panics (#5562) (#5812)
* claim: #5562

* Intersection curves: a point that won't project no longer panics (#5562)

A quarter disc at a box's corner revolved 360 deg about the box's edge and
cut (a hemisphere whose pole sits on that edge) panicked in truck at
intersection_curve.rs:133: dividing one of the cut's intersection edges
met a point that projects onto neither surface, and the hinted
projection's fallback called subs, which unwraps that same failed
projection. The guard turned it into a failed cut and a crash report.

Now the leader's point stands in, the division stops there, and the
failure is recorded (truck_geometry take_projection_failure). truck-shapeops'
face division checks it after dividing an edge and gives up, so the
Boolean attempt fails as quickly as the panic made it and the kernel goes
on to its other tries: carrying the approximate points on instead made one
kernel test (equal bores crossing) run for minutes. On this design the cut
still fails with an ordinary error, leaving the box whole; nothing panics.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:23 +00:00