Commit Graph
2694 Commits
Author SHA1 Message Date
Brennen HerbruckandClaude Opus 5.5 3c1fbf4c9d smlib tests: SSI corpus scorer and its parity with score.py
ssi_score::score_case grades an engine result (sampled curves with xyz,
uv1, uv2, both surfaces at the UV samples and the curve type; points;
status; or a crash) against a corpus case: CRASH, ERROR, INCOMPLETE,
WRONG TOPOLOGY, INACCURATE or PASS, with score.py's flags and numbers.

ssi_corpus.rs checks every case parses, every NURBS surface lies on its
truth, the truth itself passes (bar unsplit singular points), and the
verdict rules. The ignored parity test scores the corpus runner's raw
outputs and compares with score.py: 119/119 identical verdicts and
flags for SMLib GlobalSurfaceIntersect at 1e-6 (81 PASS).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 6dbda8ecf1 smlib tests: SSI scorer geometry (truth distances, polyline sets)
Test-support port of the parts of the SSI corpus's ssi_geom.py and
score.py the scorer needs: exact distances to the implicit truths, the
Gauss-Newton closest point on traced param patches, B-spline/NURBS
evaluation of the case surfaces, and score.py's segment-hash polyline
set, polyline distance, components, free ends and topology signature,
following numpy's arithmetic order.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 1edeb2a6f7 tests: SSI corpus fixtures (119 cases with exact truth)
The 119 surface/surface intersection cases of jyviko/ssi-corpus (b04c8a6,
MIT OR Apache-2.0), gzip-compressed, with its licence texts and a README
on the case format and the scoring rules. The 25 y23 cases come from
Yang, Jia & Yan 2023 (ACM TOG 42(6) Art. 211, CC-BY 4.0); both are in
ATTRIBUTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 17eafa2d48 solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
A PlacedRevolution record goes to SMLib as its exact rational B-spline
surface: each profile control point swept round the axis by a full circle of
four rational quadratic quarters starting at the face's first angle, then
mapped by the placement. The circle's parameter is not the angle, so the
face's angle range is converted pointwise and its pcurves are not carried
(SMLib rebuilds the trims). Where the placement mirrors, the record's natural
normal is the opposite of the map's, so the directions swap.

The B-spline matches the record's surface to 1e-12 with the same normal,
forward or not, mirrored or not; truck's sphere and torus now reach SMLib
with their analytic volume (1e-6) as manifold solids.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 3feb9ba2c9 kernel-cases: tessellation cases from mesh-hole reports grade watertightness
784, 1753 and the two 1666 lofts came from holes in exported meshes, so
each now also requires a mesh with no open or over-shared edge. On today's
kernel 784 and both lofts are watertight; 1753's bowl, its rim cut by a
cylinder, still has 3 open mesh edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 8cb976b9b2 kernel-cases: watertight checks the display mesh, welding vertices by distance
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
  their own and leaves T-junctions on the edges they share with neighbours. It now checks the
  display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
  across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 e809edd338 kernel-cases: thread cases that are slow by nature get 600 s
2822, 3952 and 4149 cut long modelled threads into filleted or revolved
bodies; each takes minutes on today's kernel, so they get timeout_s 600
instead of the default 180.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 58ce14f45f kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
  thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
  and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 ae8809a4b4 docs/kernel-cases.md: first full run of the kernel regression rig
372 cases. The default kernel passes 232. smlib reports "not supported yet" for every case
until the SMLib boolean switch lands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 c87bb72f0f kernel-cases: coverage by kind of source, and the ring join of #2357
- tests/kernel-cases/sources.json gives each looked-at number's kind: an open or closed issue, a
  merged PR, one of the frozen truck-geometry PRs, a kernel-paused PR. The report's coverage by
  source counts how many of each were looked at, became cases or were skipped.
- crashes/2357: one join of a ring of 90 overlapping cylinder segments. The right answer is one
  closed ring body. The old kernel still panics in its intersection curves and runs past the
  timeout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 146ab740ae kernel-cases: thread fit cases say what they grade
2969's description named another product's behaviour; 1443's and 2152's
still described the refusal. Each now says the hole is drawn at the
thread's nominal size and gets the fitted thread.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
bherbruckandClaude Opus 5.5 d7381a1fa7 kernel-cases: threads fit a hole or shaft off the thread's size again
Reverts 1375e905. A modelled thread fits by default: a hole too wide for it
is filled to the tap drill, a shaft too thick is turned down to the major
diameter, so the seven cases (995, 1443, 2152, 2969, 3366, 2369, 2705) go
back to expecting the fitted thread and its volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
Brennen HerbruckandClaude Opus 5.5 e1575385b3 kernel-cases: a thread off its hole or shaft size is refused
A modelled thread never changes the size of the hole or shaft it is on
(#1018, #2853): one that isn't the thread's size is refused, naming the
size to use. The seven cases that expected the hole filled to the tap
drill or the shaft turned down to the major diameter (995, 1443, 2152,
2969, 3366, 2369, 2705) now expect that refusal, with its numbers worked
out from ISO 68-1 and the message in `refusal`. An opt-in fit option, if
it comes, gets cases of its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 248fee75b9 ladder: every ladder run measures one case at a time
Runs are compared with the golden's times, so a run sharing the machine between cases flags
slowdowns that are only contention (seen with --jobs 4: four cases two to ten times slower).
--jobs still overrides it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 35ebc816ba kernel-cases: a missing capability's message is the case's own text
The report already says "not supported yet" for the status; the error repeated it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 b249100eae ladder: 116 cases in 11 tiers, from primitives to a threaded, shelled housing
Tiers: primitives; booleans in the degeneracy classes (coincident and coplanar faces, edge-on-edge,
vertex-on-face, tangent along a line and a circle, near-tangent gaps and overlaps of 1e-3 and
1e-6 mm, seam and pole crossings) and cuts that end in a single line (a knife-edge wedge, a V
groove and a cylinder that pinch the part in two, a hole tangent to a face, a notch flush with an
end); line-and-arc extrudes and revolves (partial, touching the axis); spline profiles, sweeps
and lofts; holes and tapped holes (blind, drilled, counterbore, countersink, M5-M8 taps, into a
curved face, near and tangent to an edge, crossing); modelled threads (external, fine, partial,
to a shoulder, internal, into a chamfer, at a filleted shoulder); fillets (constant, tangent
chains, convex and concave, variable down to 1e-3 and to 0 at a vertex, corners with equal and
unequal radii, g2 corners); chamfers (two distances, angle, three- and two-edge corners, curved);
shells and offsets; patterns and mirrors (overlapping instances that cut a core free); and
cumulative parts.

A running part grows one tier at a time through `base` (back wall, revolved boss and slot,
spline window, tapped holes, rounds, chamfers, shell, vents), and the last case adds its thread:
it carries every tier. Answers are analytic wherever the geometry has them (Pappus, Steinmetz,
ISO 68-1 basic thread profiles, exact Gauss quadrature of Bezier profiles, inclusion-exclusion
for chamfered corners), otherwise invariants; each `method` gives the derivation, and
tools/kernel-ladder/cases.py (standard-library Python, like tools/oracle-analytic) writes them.
Capabilities SolidCraft lacks are `missing` cases: multi-start threads, thread runout lengths,
fillet corner setbacks.

The golden is the first recording on truck, each tier sorted by its time. SMLib booleans are
not on this branch yet, so the smlib column records "not supported yet" for every case.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:46 -04:00
jyvikoandClaude Opus 5.5 208c39461e ladder: cargo xtask kernel-cases --ladder, the complexity ladder's runner
The ladder orders kernel operations by complexity instead of by random goldens: a manifest
(tests/kernel-cases/ladder/ladder.json) lists tiers in order and each tier's cases in order;
every case is graded against its own answer like any rig case, and a golden
(tests/kernel-cases/ladder/golden.json) records per case and kernel the status, the commands'
time and what the kernel made. A run compares with the golden and flags slowdowns (over twice the
time and 0.25 s more), status changes and changed counts. `--record REASON` re-measures one case
at a time, rewrites the golden with its reason and sorts each tier by the first kernel's time.

The report, docs/kernel-ladder.md, gives per tier and kernel the counts per status and the
frontier: the first case in ladder order the kernel fails. It reuses the rig's process-per-case
runner, timeout and cells; results now carry their path under tests/kernel-cases/ so cases from
other areas can be listed in a tier. The README documents `base`, `missing` and the ladder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 bf0761f6b9 kernel-cases: base recipes, missing capabilities, and the commands' own time
What the complexity ladder needs from the rig's case runner, kept in the one runner:

- A script may name a `base` case directory: that case's commands (and its own base's, up to
  32 deep) run first, so a ladder case starts from the previous tier's finished part without
  copying its commands. `$CASE` is each recipe's own directory; `$OUT` is the running case's
  scratch directory, in its bases too.
- `missing` in expected.json reports the case as not supported yet without running it: a
  capability with no command or parameter (multi-start threads, fillet setbacks) stays visible
  instead of being faked with a stand-in.
- Each result carries `seconds` (the commands' own time, without process start or grading) and
  `measured` (body count, face/edge/vertex counts, volume, area), for the ladder's golden.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 22fdb52498 kernel-cases: tessellation case from #466, skipped sources for sheet-metal, sweeps and tessellation
A revolved cone tip with an exact volume and area; auto-reports without
a design are listed in the skipped.json files.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 9c9ec27c3b kernel-cases: fillets cases from #1008, #1191, #3276 and #3753
A tray with seven rounded edges, both rim rounds of a tube, a chamfer on
a joined L-shaped body, and a circular pattern of a chamfered hole, each
with an analytic volume.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 8764a76ff8 kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987 #3130 #3824
An M8x1 thread in a 7 mm hole, and three booleans of finely faceted
prisms (1000 and 1200 flat faces) with planar and curved partners, each
with a closed-form volume. Three auto-reports without geometry are
listed in skipped.json.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 c24b066d25 kernel-cases: an outcome for geometry with no single manifold answer
`"outcome": "solid_or_refused"` takes a clean refusal, or else grades the result as usual. Two
bodies that touch along a circle only (#168, #3841) have no one-solid union: a refusal or the two
bodies left apart are both right; fusing them is wrong. The two cases said opposite things
(two bodies, a refusal) and now agree.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 678a70da2c kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
  holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
  #3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
  curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
  body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
  two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 75aa8acb6c kernel-cases: sweeps skipped sources (72)
Every other sweep, loft, revolve, pipe, coil and rib issue and PR, one line each: auto-filed reports that carry only command parameters, reports cut off in the source, UI and dialog items, feature requests, and failures that belong to import, shell, fillets, booleans or tessellation.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 434a68bbc2 kernel-cases: sweeps coil and surface cases from #793-#4056
Coils split and trimmed by a plane, cut with a negative pitch, joined flush round a cylinder, intersected with a cylinder, cut as a thread groove into a bore, and placed with a square wire outside the diameter (screw-motion Pappus); surface revolve, sweep and loft sheets with areas worked out by integration, and a rail-guided surface loft in either section order.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5f131cb888 kernel-cases: sweeps closed, twisted and joined sweeps from #561-#3897, ribs, tripod pipes
End faces of a loft, a sweep and a coil extruded, closed twisted sweeps round a torus, a twisted square cut through a tube, a ring swept along a short arc and joined to a collar, two overlapping swept arc walls, a rib grown along the sketch normal, and three pipes meeting at a point.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 a9002968f0 kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
End scale, parallel orientation and guide rails on straight paths (frustums and a sheared cylinder), a rectangle swept round a mitred corner, a profile mid-line on a closed rounded rectangle, second sweeps from a plane along a closed circle, hollow and cutting pipes, and a flat wall of a swept corner extruded.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5e71db6628 kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Refusals for a profile across the axis and an axis outside the sketch plane, a construction axis picked by name, a cone left by a revolve cut, revolve joins and cuts whose end faces lie in a face of the target, a dome cut by a ball on its seam, a horn-torus turn, and half-disc revolves with a refused hostile sweep scale.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 b60debec11 kernel-cases: sweeps revolve cases from #450-#2947 (faces, axis, cuts, seams)
Spherical shell sketched off the origin, adjacent profiles on the axis, whole planar faces of full and partial turns and a face pick on a fresh revolve, a half slot turned about its centreline (alone and as a cut), a torus cut by an overlapping ring, and a 300 degree revolve crossed by a plate.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 ec154f5421 kernel-cases: booleans cases from items another area had skipped (#451, #1107, #1140, #2928, #3850/#3741, #1984, #3573)
Added: 451 (block inside / crossing a hollow spherical-shell tool), 1107 (hollow hub joined
with nine blades), 1140 (spiral hollow lofted tube cut in half and joined), 2928 (cap-touching
lips with 0.0001 mm offset walls), 3850 with 3741 (cross cut touching a round side, and the
hole after it), 1984 (near-coaxial pin and rivet overlaps). #3573 is now a source of
shell/3576. Their lines are gone from the skipped files; #2259, #3518 and #3602 stay skipped
with corrected reasons.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 85f7200bbf kernel-cases: sweeps lofted tubes, blades and windows from #968-#2992
Hollow elbows lofted along a bend (Pappus), hollow bands halved and joined, a flange touching the end of a bent tapered loft, tapered and twisted lofted blades patterned round a disk, and a loft joined into a window that it overhangs, alone and mirrored on a hollow case.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 bec9db59e6 kernel-cases: sweeps loft cases from #96-#3936 (shallow cuts, cones, comb, rails)
A shallow loft cut from a slab top face, a loft cut whose sections touch the block sides given in either order, circles lofted into a cone on a turned-over plane, a loft guided by a rail, a circle lofted to a comb outline, a square lofted to a circle, and a circle-to-rectangle loft joined to a cylinder.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 739524a173 kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Ruled lofts of zig-zag outlines worked out with the prismatoid formula, rotated rectangle sections turning through half a turn (Pappus), ring sections with round and rectangular holes, a cone loft meeting a cylinder wall near its top, a loft standing on a box face, a loft cut limited by targets, and a refusal for sections in one plane.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 ead88e582b kernel-cases: threads cases from modelled-thread reports (2 of 2), skipped sources
The rest of the thread cases (holes at the nominal size, shafts and holes
off the thread's size, the crash and sketch-attachment repros) and the
triage of the sources that are not kernel geometry.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 04135da965 kernel-cases: threads cases from modelled-thread reports (1 of 2)
External and internal modelled threads, tapped holes and threads beside
other features, each graded against the ISO 68-1 groove volume (Pappus)
and the part's own closed-form volume.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 62124a7117 kernel: spline edges on part of their curve load as that piece
SMLib bounds an intersection edge on a piece of its spline (seed 32 intersect:
a block and a cylinder, the top disc's edges), and the truck decode refused
such an edge ("not supported yet: a spline or intersection edge on part of its
curve"), since truck bounds an edge by its curve's whole range.

bspline::segment cuts a B-spline to a sub-interval of its domain exactly:
Boehm insertion of both ends until each has multiplicity p, then the knots and
control points between them, clamped on the interval. The same points at the
same parameters, so the edge keeps its interval and the record its numbers.
load_edge_curve loads a spline or rational spline edge on part of its curve as
that piece; an intersection edge on part of its curve is still refused. Our
own records (interval = the curve's range) load as before.

Tests: segments of a rational cubic with a double knot, inside a span, across
knots, from or to a domain end, match the whole curve within 1e-12; both
spline kinds load on a piece with that range and the same points, and beyond
the domain are refused; SMLib's block ∩ cylinder decodes (it was refused) with
π r² h within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 62142ef38e brep: a revolution of a closed profile is periodic along it
The adapter loads an analytic torus as truck's revolution of the whole profile
circle, a rational quadratic closed on itself, so an SMLib torus is one face
bounded by its two seam circles, each used both ways. The display evaluator's
domain gave a revolution a period around its axis only: projected along the
profile the loop jumped from one end of the knot interval to the other at its
start vertex, the plan failed ("boundary crosses itself") and the body fell
back to truck's mesher, which meshes a sphere bounded by its seam alone as
nothing (seed 60 union, a torus beside a sphere: 925.0 of 990.7 mm³).

tess::uv::closed_curve detects a closed profile the way closed does a closed
spline surface (clamped knots, first and last control point and weight the
same within 1e-9 of the polygon's extent; the shared checks are factored out),
the domain then has period = the profile's knot interval along it, and
EvalSurface::wrap/derivs wrap that parameter back into the interval, so the
plan's projection, unwrapping and both evaluators treat it as periodic. A
cylinder's or cone's line profile is unchanged.

Tests: a revolved whole circle, either parameter order, has both periods and
evaluates a period away as inside; SMLib's torus, alone and beside a sphere,
decodes without meshing to orient it, plans every face and measures within
1e-3 of 2π²Rr² (+ 4/3 πr³). With the closed profile undone the torus plan
fails as above.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
jyvikoandClaude Opus 5.5 ce201eea1b kernel: SMLib spheres cut by a boolean decode oriented and meshed
Results of SMLib booleans on its own spheres came back wrong through
body_from_smlib (side-by-side runner: seed 13 cut −1611.9, seed 61 cut −252.4
against SMLib's 4056.9, seeds 46/61 union 80 % short). The schema 4 records were
right (check_geometry passes, outer loops counter-clockwise, shells out of the
material); three things on the truck side were not:

- Body::new orients a solid by the volume of truck's coarse mesh, and truck's
  mesher meshes a sphere bounded by its seam alone as nothing: the rest of the
  body set the sign and turned it inside out. A foreign record is oriented by
  its shells, so body_from_smlib now builds the body with Body::oriented
  (revolved faces turned as before, orientation kept, nothing meshed).
- rephase_revolved turns each revolved face so it sits around angle π. A face
  that uses its seam both ways goes all the way round; turning its surface ran
  the wrap through the face's hole, the display plan failed and the sphere
  meshed as nothing. Such faces now keep their wrap on their seam (truck's own
  primitives have none: their round faces are split).
- The display plan opened only a loop of one seam used both ways. A sphere face
  whose meridian a trim splits uses each piece both ways, turning back at each
  pole, and projected onto one parameter line ("boundary crosses itself"), so
  the whole body fell back to truck's mesher and lost its sphere faces. A loop
  through both poles that turns straight back at one now has its run between
  the poles moved one period along, whichever way keeps it within one period
  with a positive area (poles split as the planner splits them); the routing
  check finds such loops too.

Test: SMLib's sphere less a box cap beside its seam, across it (seam split) and
a bar bored into its side away from the seam decode without meshing to orient,
oriented as recorded, every face meshed, within 1e-3 of the exact volume.
Before, the decode meshed the body to orient it; with only the plan's pole
handling undone the −x cap measures 50.3 of 469.1 mm³, with only the
rephase undone the bored ball 252.4 of 4059.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 5a6a91ebbd kernel-cases: fillets skipped sources (287)
Every other fillet, chamfer and blend issue and PR, one line each: auto-filed reports from private designs (picks and error only), sketch fillets and chamfers, UI, previews and navigation, feature and fit-option requests, reference cases that already exist in tests/oracle, surface modelling, and failures that belong to booleans, shell, import, tessellation, sheet-metal or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 3dc7f90e63 kernel-cases: fillets correct the union volume quoted in 1262
The graded volume was right; the derivation text quoted the union as 46476.5 instead of 45571.7.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 d235bd7a0e kernel-cases: fillets pattern and G2 cases from #193, #219, #862, #1488, #2341, #2708, #2811
Copies of filleted and chamfered features (a pasted block, a pattern of pockets with corner rounds, a pattern of chamfered bosses), a grille of rib roots, a join that needs a boolean retry followed by a fillet, and curvature-continuous fillets worked out from the documented quintic section.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 cc3f8b1788 kernel-cases: fillets outline and corner cases from #237, #334, #485, #556, #851, #1207, #1213, #1262, #1557, #1667, #2498
Rounds along curved outlines, with the removed volume worked out by Pappus or by integration: merged cylinders, a D prism, a rounded rectangle with 0.02 mm end edges, a long box beside quarter turns, vertical corners after bottom rounds, a bent tube end, a boss's bottom arc, bars running into a boss, an edge ending on a curved wall, and the knife-edge arc corner.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 18af04b919 kernel-cases: fillets refusal, fit and straight-edge cases from #190, #199, #324, #896, #1668, #2752, #2852, #3369, #3435, #4141, #4143
Rounds with their own right answers: a radius larger than the ring it runs along (refused), a pick on a smooth seam (refused), a far edge pick (refused), a round that uses up an end face or a wall, a round over a hole, rounds on both sides of a thin wall and concentric with an inner one, a round on a sphere's flat cut, an edge ending on a tangent seam, and rims on B-spline ramps.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 aefca34522 kernel-cases: fillets chamfer cases from #814, #1080, #1390, #1986, #2672, #2719, #2797, #2907, #3655, #3779, #3868, #4055, #4101
Chamfers on boxes, plates, discs and sectors with closed-form volumes: all twelve edges in the order that was refused, a concave chamfer that adds material, a chamfer next to square openings and one that runs into them, a hole rim tangent to the bottom face, a hex hole's corner bevels, a one-pick chain on a large part, a bottom loop as wide as the corner round, two distances on a circular rim, the end outlines of a rounded prism, a chamfer over a joined pin, and the equal chamfer of a slanted plug. Spline-sided pillar (invariants only) for chamfer and fillet.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
bherbruckandClaude Opus 5.5 6a9b8fd740 kernel-cases: booleans from #3404-#4124 (28 cases, 76 skipped)
Cases: mirror of a cut under a wall (#4011), coplanar intersect (#3671), multi-lump
intersect (#3526), split along a face plane (#3447), 64-peg join (#3455), boss on a rod
(#3485), collinear cylinders and pin in a bore (#3497), swept G2 cut (#3604), spokes
tangent to a hub (#3612), sphere and pyramid (#3633), column in a channel (#3665),
extrude to a point on an edge (#3729), emboss on a cylinder (#3782), circle-only join
(#3841), ring on a perforated plate (#3887), symmetric revolve cut (#4008), walls round a
floor (#4058), slab beside a bore (#4095), and others. The rest are skipped with a reason
in skipped-c.json.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 0ae42f4111 kernel-cases: sheet-metal skipped sources (87)
Every other sheet-metal-keyword issue and PR, one line each: UI, docs, file
format, naming and attachments, DXF output, feature requests, user designs
with no repro, and failures that belong to booleans, fillets, shell, sweeps
or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 676670ba80 kernel-cases: sheet-metal tray and unfold cases from #349, #405, #436, #514, #723, #1797, #3417
Trays at 72 degrees and with four angles and heights, a tray shrunk by a
parameter and unfolded, an L bracket unfolded and refolded, opposite flanges
at 105 and 120 degrees, torn corners folded, and a rhombus whose square
reliefs would overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 474f608536 kernel-cases: sheet-metal convert and unfolded tray cases from #479, #488, #723, #725, #839, #1092, #1285, #1481
Unfolded trays graded by the flat size W + 2(H - BD): torn, round and square
relieved corners, per-feature reliefs, rounded plate corners; a shelled tray
and a bracket converted at their bends; an L converted to the rule's radius.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 943a7d66b4 kernel-cases: sheet-metal flange and cut-out cases from #416, #529, #570, #601, #634, #659, #702, #978
A flange beside the leg of an L, along what a cut-out leaves of an edge,
beside a ledge as tall as its setback, a return on a flange's far edge, a
round hole, a slanted slot and an ellipse across a bend, a hundred slots with
four folds, and the refusal of rule values sheet.flange would ignore.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 b13155cbbf kernel-cases: sheet-metal cut-out, flange and refusal cases from #296, #1095, #1280, #1295, #1311, #1979, #3078, #3234, #3324, #3353
Cut-outs folded and refolded, a hole square to a 45 degree flange, a slot
that parts a flange from its base, an inside flange on a plate turned
62 degrees, cuts after cuts, a hole beside two adjacent flanges and a flange
on a flange's side edge; refusals for a flange on a bend line and a flat
pattern after a fillet; a mirrored sheet body that must stay sheet metal.
Volumes by hand (K = 0.5 folds: flat area * t; otherwise bend volumes).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00