A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
* claim: #9015
Co-authored-by: Cursor <cursoragent@cursor.com>
* Evaluate bare length offsets in the design's units (#9015)
Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #8865
* parameters.add: a parameter with no unit takes the design's units (#8865)
A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.
A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4071
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Define a named parameter inline from any value input (#4071)
Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.
- doc: the lexer skips a definition's `name =`, so until the design stores
it the text evaluates as its expression and commands read and check it
like any value. `Document::define_inline` then turns every stored
definition (feature inputs and placements, dimension parameters, sketch
pattern and text values, joint and coupling values, sheet metal and
plastic rules, canvas planes) into a user parameter, the unit following
how the input reads a bare number. A taken, reserved or empty name, two
different values for one name, and a definition in a parameter's own
expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
hold definition-shaped text; the reply has `defined` (the first name,
as `sketch.dimension` already gives) and `definitions`. A refusal fails
the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
changes (a dimension's or feature input's own, references following)
and sets it; when the value is just `new`, it sets `new`. `changes`
refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
sends a definition as typed and previews only its value; the box corner
and offset Distance 2 use the value; fields whose command keeps no
expression (sketch scale, move, chamfer) refuse a definition with the
way to name it. The dimension editor says which parameter it named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4420
* Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420)
Document::rename_param rewrote other parameters, feature inputs, dimensions,
configurations and joints, but not the expressions of sheet metal and plastic rules or
the plane a canvas lies on, so after a rename the sheet metal and plastic features
using them failed with "unknown parameter" and the canvas left the view. It renames
them there now, and param_users lists them (a rule's field, a canvas's input), so a
parameter they use can't be deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: rules' features in drives and the graph; shared rule field lists (#4420)
A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic)
features rebuild when it changes, so parameters.users lists them in drives and
parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut
replace the hand-written copies of the rules' fields in params.rs, eval.rs and
sheet.manage_rules. Suggested by @CamWight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fmt (#4420)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2757
* fix(params): autocomplete offers a parameter for any part of its name (#2757)
Typing `side` now offers `cab_side_thickness`: parameters match the word
anywhere in their name, after those that start with it, both in the expression
boxes and in parameters.complete. Functions, constants and units still match
from the start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
`PlaneRef::walk_exprs` stopped at `Flipped`, so a sketch created with
`flip` on an offset plane (`{plane: "XZ", offset: "d", flip: "x"}`) did
not list the offset as an input. Changing `d` rebuilt nothing that read
the sketch, and the model went stale.
`Flipped` now continues to its base, as `Offset` and `AtAngle` do, in
both `walk_exprs` and `walk_exprs_mut`.
Test: a loft between XZ and a flipped XZ plane offset by `d` has the
volume for d = 30, and for d = 50 after `parameters.change`.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* parameters: import evaluates once; parameters.change takes several names
parameters.import checked every row through change_param, which cloned the
design and evaluated every parameter per row: 2000 rows took 9.5 s, 2823 in
an assembly minutes. Rows are now checked and applied in one pass with the
values carried along, then evaluated once (2000 rows: 0.016 s), still all or
nothing; a row may name a parameter defined by a later row.
parameters.change {changes: {name: expression, ...}} sets several existing
parameters together, rebuilt once and undone in one step.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* parameters.change: the params doc names the `changed` result of `changes`
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Fixes#1187. New parameters.move {name, before|after} reorders user parameters (the design's own params order, so it is saved with no format change, and undoable); the Parameters dialog's user rows get up/down buttons. Label in every catalog. I merged main in. Checked on main + this branch: cargo check --workspace, the engine parameters tests, the UI parameter_order test, and docs/features.md regenerates unchanged.
* feat(sketch): constructive solving ahead of the numeric solver
Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.
New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.
When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.
Refs #203
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(doc): keep a sketch's solved state across value edits
Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
solved state (Document::solve_sketch), so a dimension edit keeps the
sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
sketch that solved before fail or turn over is refused with the
conflicting constraints named; otherwise the solved sketches are written
back into the document (Model::adopt_solved_sketches), which changes what
saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.
Refs #203
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end
Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
once and shown, later features keep their last result (marked stale)
until sketch.drag_end or any command that reads the model evaluates it
(CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
model once.
- Undo and redo evaluate a new document once (execute does) instead of
twice.
- The viewport drives drags through live frames and drag_end; dimension
text drags start only off sketch geometry.
Refs #203
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>