* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Adds the last 79 German translations for messages that exist in en.json
but are missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the agent chat tool summaries,
the history, sending to a slicer, Perforate, the window system and the
web app.
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the Render studio (lighting,
environment, sun, depth of field), bounded volume and interior scattering,
saved shots, the timeline messages, thread direction and the agent chat
and endpoint settings.
* claim: #9860
Co-Authored-By: Claude <noreply@anthropic.com>
* Sketch panel follows Dialog buttons at top (#9860)
The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.
Changes a default: no
Co-Authored-By: Claude <noreply@anthropic.com>
* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9742
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* joint.drive: a suppressed joint stores nothing; the reply says what was asked and why a value differs (#9742)
Driving a suppressed joint answered moved: false with "H is suppressed"
but wrote the values into the joint, with an undo step, so the part
jumped when the joint was unsuppressed. A suppressed joint outside any
motion link now stores nothing.
The reply gains `requested` (the values asked for, before limits and
links) and `held`: each driven value that ended up elsewhere, with why
(a motion link sets it, as a screw's travel follows its turn; a limit;
contact; a closed loop). A drive that moves nothing gives the first held
value's why as `reason`, so driving a screw's distance alone no longer
answers moved: false without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9735
* Sketch: conflict messages name real constraints, not the refused one's id or a false 'fully constrained' (#9735)
* fmt + clippy: contains over iter().any (#9735)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Add German translations, batch 7 (#7237)
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the parameter list setting and
the Render panel pages: GPU material overrides, nested dielectrics, saved
optics, output size, physical background, presentation filters, preview,
quality budget, regrade and the result area.
* German batch 7: render.result_sequence follows the catalog's Checkpoint term
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9740
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Body names: inspect.interference refuses an unknown body; appearance reads take a placed copy's name (#9740)
inspect.interference dropped a name that is no body, so a misspelled or
wrongly cased name left that body unchecked and two overlapping cubes
answered count 0. It now refuses the name, as inspect.clearance does,
naming the closest body when one is near enough to be a typo or another
case (cmd::no_body, on the existing edit_distance).
appearance.chain, appearance.list and appearance.replace's scope take a
placed copy's name (KB (K:2)) and a placement's (K:2) for the body and
component they show, as appearance.assign already does, through two
Session helpers: own_body_name (on body_frames) and component_or_placement,
which appearance.assign now uses too. A name that is neither is still
refused. select.set already refuses an unknown body on main (#9737).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
* claim: #9715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)
assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9619
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: edit an added AI agent (#9619)
Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9258
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: paste sketch geometry copied in another design (#9258)
Sketch geometry copied or cut in a sketch (sketch.copy / sketch.cut) now pastes into a sketch of another open design with Ctrl+V or the context menu, at the cursor or at the copied coordinates, with the constraints and dimensions among it. A dimension whose expression names the copied design's parameters keeps its value, in its unit; a text keeps its numbers. SketchClip::for_another_design prepares the clipboard; the app keeps the last sketch copy beside the cross-design body/component copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9293
* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)
The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9060
* Ribbon tooltips: help for the Sketch tools (#9060)
84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.
edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The browser asks about every joint of the design on every frame, and
the answer walked the list of hidden joints: a nested STEP assembly
hides thousands of them, so a frame cost grew with the size of the
design.
Session keeps the hidden joints and folders as sets and answers from
them. The sets are built when the view changes and kept until it
changes again: the revision says the design changed, and the lists
say the view changed under it (the view is replaced outside the
engine too, without a revision of its own).
The behaviour is unchanged: the hidden joint stays hidden, the shown
one stays shown, and undo and redo keep the hiding right.
* claim: #9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: say why a drawing has nothing to import, and read UTF-16 files (#9641)
An SVG with nothing SolidCraft draws (only an embedded picture, shapes
pulled from another file with <use>, or not an SVG at all) was refused with
"invalid parameters for sketch.insert_svg: the drawing has no geometry
SolidCraft reads". It now names the file and says why, pointing pictures at
Insert Canvas and Canvas to Sketch. SVG files with a byte-order mark or in
UTF-16 now read, and a gzip-compressed (.svgz) file is refused clearly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: decode UTF-16 with as_chunks (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9041
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041)
Entering the Render workspace started the GPU path tracer setup even with
the default Raster image method. The setup compiles the path shader, which
some Vulkan drivers (Mesa RADV/ANV, NVIDIA) take gigabytes over: the memory
climb reported while orbiting in Render. The setup now starts only while
Render is open with the GPU path method.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9730
* Preferences: unapplied changes no longer reach the settings file while the dialog is open (#9730)
* Preferences: hold unapplied changes out of the settings file while the dialog is open
While prefs_window.snapshot is set, SolveApp::prefs() writes the snapshot's
values - the ones Cancel restores - so the periodic autosave, quit, window
close, web save and control channel can no longer persist a change that was
never applied. Apply re-baselines the snapshot; settings the dialog cannot
change keep saving live. Adds regression tests and updates the tests that
pinned the old behavior.
Fixes#9730
* prefs: bind the snapshot's shadow outside json! so the ui-containers guard reads it
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9686
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: joint.edit takes the two sides
joint.edit accepts a and b in the form joint.create takes them (read by the same origin_param), so a joint can move its attachment without being deleted. A side left out keeps its place. The two sides must stay on different occurrences, checked as joint.create does. Limits, values, expressions and the name are kept; a relation's values start again where its parts are.
joint.edit gets an input contract and reply type (schema/joints.rs), and leaves schema/unconverted.txt.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint shows both sides and picks them again
The Edit Joint dialog now shows the two sides in the same selection inputs as Joint, each pre-filled with the face or edge of its own component under the origin. OK sends joint.edit a or b only for a side picked again, so an untouched side keeps its origin exactly.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side turns the part as joint.create would
joint.edit kept the joint's old angle when a side changed, so the part could turn by a half turn about its axis when the new origin's x lay the other way. When a side moves and no angle is given, the angle is worked out again as joint.create does (the least turn from where the part is now); a relation's angle is its tilt and stays.
The mechanisms reference says joint.edit takes a and b.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: pre-fill sides by name, send the angle only when changed
A side shows the face or edge its snap names, the piece nearest its stored pick when the name has several, else the one nearest that pick; it no longer searches outward from the frame origin, which could show the plate beside a hole for the hole's wall. A point or frame side shows nothing. OK sends the angle only when the user changed it, so a side moved without it turns the part as joint.create would.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side leaves an angle expression alone (#9686)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9465
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)
The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.
A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9105
* Sketch: alignment guides from any hovered point while drawing (#9105)
While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9130
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a Joints folder under each placement lists the joints that attach it (#9130)
Each component placement in the Browser gets a Joints folder (closed at
first) listing the joints whose Component 1 or Component 2 is that
placement, each beside the placement it joins it to. The rows are the
root folder's joints: click picks, the eye hides the glyph, double-click
edits and the menu is the joint's menu. The root Joints folder is
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: written to disk in the frame they change, not only at a clean exit (#8275)
eframe saves app.ron every 30 s and when the window closes normally. A
change made since the last save was lost whenever the app didn't close
normally: ended from the Task Manager, stopped by a sign-out or shutdown,
or crashed or hung in the graphics driver on the way out. The next start
then showed the old settings (View navigator back to Axes, Display quality
back to Normal).
The desktop app now writes its settings and flushes them in the frame they
change (frames with input and the one after), as the web app already does
(#8644). Unchanged settings are not written again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: write at most once a second, and only after input that can change them (#8275)
Review: pointer motion came in every frame while the mouse moved, so the
settings were serialized every frame; and some settings change in every frame
(a panel's width while its edge is dragged), which would have flushed app.ron
on the UI thread each frame. Only clicks, keys, text, paste, wheel and pinch
count as input now, and the file is written at most once per second: a change
made in between waits, a repaint is asked for when its second is over, and it
is written then, so an idle app still writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9062
* Sketch drag: a line is never shrunk to a point to follow the cursor (#9062)
A line's end on a horizontal construction line through the origin, dragged
up off it, made the construction line vanish. A horizontal row is
b.y - a.y, which a line a hair long meets at any tilt, so the drag's held
solves met the point-on-line by shrinking the construction line: to 1e-5 mm
on the first frame, 1e-7 mm by the tenth, and the end went up.
A drag step (held solve, the tangent-ends-held solve, and each cursor
correction pose) that shrinks a line or circle from over 1e-3 to under
1e-4 now counts as failed, as a step that wraps an arc does. The end then
stays on the construction line, which keeps its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9034
* Assistant: say when an installed agent can't start, and how to reinstall it (#9034)
An agent whose program is found but fails its `--version` check without
printing a version (npm's opencode.exe left as a placeholder when the
package's setup script did not run, which Windows refuses with "not
compatible with the version of Windows you're running") was listed like
a working one, and connecting only said "The agent stopped." with the
system's message.
Discovery now keeps why the program did not start: the spawn error
(Windows' `%1` replaced with the program) or, through a `.cmd` shim, the
first stderr line or the exit status. A probe that times out still says
nothing. The picker shows "Installed, but it does not start: ...", and
connecting first explains it with the agent's install command and Refresh.
The control channel status carries `problem`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9696
* Show an edited Free Move its stored turn as the X/Y/Z angles that remake it (#9696)
* cargo fmt
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9142
* Exploded View: grey it out until the design has two components (#9142)
On a part made of plain bodies (the sample plate) Exploded View opened its
dialog and failed on OK with "an exploded view needs two or more
occurrences". The command is now disabled until the design has two or more
occurrences, and its tooltip says why and which commands make components.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>