Commit Graph
624 Commits
Author SHA1 Message Date
fbb00dc7b2 Canvas: store reference image data as shared text so edits stop copying it (#10489)
* claim: Canvas: store reference image data as shared text so edits stop copying it

* Canvas: store reference image data as shared text so edits stop copying it

Every edit clones the document, because the undo history still holds the
old one, and the canvas image was a plain String: each of the up to 200
undo states owned its own copy of the base64 text. Canvas::data is now
Arc<str>, like the shared STEP text, meshes and point clouds; serde's rc
feature writes it as the same JSON string, so design files stay byte for
byte the same.

A 4.2 MB image with 250 edits: peak memory 1.09 GiB -> 42 MB, run time
1.16 s -> 0.12 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:46:17 +00:00
f233f000e8 Mesh imports: compare by pointer before comparing contents (#10490)
* claim: Mesh imports: compare by pointer before comparing contents

* Mesh imports: compare by pointer before comparing contents

MeshData derived PartialEq, so the dirty check and the autosave check
walked every coordinate and index of a scanned mesh after each edit,
although the document and its saved copy share the same arrays. Compare
shared arrays by pointer first and value by value otherwise, as Points
and Colors already do. About 1.9 ms per comparison for a mesh of one
million triangles goes to nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:17:11 +00:00
PapaEcho ce72abacf9 Construct: plane through an axis and a point (#10178) (#10472)
* claim: #10178

* feat: add plane through axis and point (#10178)
2026-11-01 09:15:25 +00:00
FrankandClaude Opus 5.5 7239c95858 Sketch Project: round edges project as arcs, not short lines (#10312)
Projecting a whole body fitted its outline from mesh edges: a round wall seen
edge-on has triangles leaning a hair either way, so the outline zig-zagged
between both rims and broke into two-point pieces (lines), and seams where two
faces' triangles don't share vertices counted as open, outline edges. Faces
that face one way all over (planes, cylinders and cones about the sketch
normal) now decide for all their triangles, near vertices are welded, and a
seam between two faces facing the sketch is no outline. A STEP hook went from
159 lines to 10 lines and arcs.

A single rounded or chamfered rim of a cut curved face is a spline that only
follows its circle; read as Bezier pieces it came in as twenty splines. An
edge read as spline pieces that stays on a circle within 1e-5 of its radius,
in a plane parallel to the sketch, now comes in as that arc.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 07:13:00 +00:00
semmelrindeandClaude Opus 5.5 38b9ff223b Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438) (#10466)
* Frames: test that a renamed cut-off piece keeps its name in a rebuild from the features alone (#10438)

solidcraft-cli eval rebuilds a saved design without its saved model; the
rename made after a cut then lands on the first line's member. The test
reproduces it on main; the fix follows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438)

Since #10132 a cut's pieces past the first belong to the cut and the piece
that keeps the body's name to the body's own feature. Ordering the pieces
by their faces then moved the names among them but left each body's
feature behind, so the cut-off piece said the frame member feature made
it. body.rename stored its new name there, in the first line's slot, and a
rebuild from the features alone (solidcraft-cli eval of the saved file)
named member A after it. A name now moves together with the feature it
belongs to.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 06:43:40 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 7e701aabc1 Save: write the model cache manifest without copying the model's records (#10419)
* Find a saved model's sheets by their text, not a record built per state

Saving a design with its model cache asked, for every state, for each sheet-metal body it holds,
and built that sheet's JSON record each time only to find it written already. A design of 906
states with 300 sheets spent most of its save there. The sheet's text written straight from it
is the key now; its record is built only the first time. The records and the file are the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Write the model cache manifest without copying the model's records

The manifest was built as a JSON tree, which copied the whole model's records (13 to 33 MB of
records in large designs) before writing them, and a cache too big for the file wrote it again for
each try at fewer states. The manifest is now written from the records where they are, its fields
in the sorted order the tree wrote them, so the file is the same byte for byte.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 03:19:59 +00:00
NOWN-DEVandClaude Opus 5.5 68105938e2 Sketch: a text rebuilt with other words keeps the far-move walk (#10357)
A sketch holding a text whose words come from a text parameter is left
unsolved after the words change and its links then move far, with the
warning "the sketch constraints conflict (k1, ..., k10)". The same two
changes the other way round solve.

Repro: a sketch with three projected points, a construction rectangle on
them and a centred text along its far side, the text's words given by a
text parameter. Change the parameter's words, then move the source
geometry about 280 mm. Without the word change it solves; with it, the
sketch warns of conflicting constraints.

Other words are other outlines: the text is built anew with new points
and curves. The solve that walks a sketch from its stored state to a far
link move (and the check for sides the jump turned over) refused the two
sketches as not the same entities, and the single jump left alone failed.

`Sketch::stored_with_rebuilt_texts` gives the stored sketch as this one
has its entities when they differ only by rebuilt texts: the texts'
entities as they are now, every other point, radius, arc turn and
constraint value as stored. `Document::solve_sketch` walks from that, so
the points pair up again. Sketches that differ in anything else are
refused as before.

Test: sketch_project::side_tests::a_label_follows_its_source_far_after_a_text_parameter_gave_it_other_words
(fails without the fix with the conflict warning above).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:15:32 +00:00
Colin Faulkingham df04e7742f Assembly: let components extruded from reference faces move independently (#10289) (#10332)
* claim: #10289

* fix: preserve placement of face-derived components (#10289)
2026-10-31 23:51:18 +00:00
bherbruckandClaude Opus 5.5 beb35029a4 Release 0.29.0 (#10347)
Fold the pending design format changes (align-axis-mask, equation-variable-unit, link-file-digests) into format 46.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:20:15 -04:00
Dahak BuildsandDahak Builds 31326e9898 Frames: renaming a cut-off piece of a frame member renames a different member after a rebuild (#10123) (#10132)
* claim: #10123

* Frames: a renamed cut-off piece keeps its own name through a rebuild (#10123)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 17:32:32 +00:00
Colin Faulkingham 2e981d66e8 Sketch: allow dimension edits with tangent caps (#4823) (#9494)
* claim: #4823

* fix: resize sketches with tangent offset caps (#4823)
2026-10-31 16:04:29 +00:00
ashxddaga 7c013333db feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946) (#10015)
* feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946)

* style: apply cargo fmt across crates

* fix(clippy): use filter then map instead of bool::then in filter_map
2026-10-31 12:00:17 +00:00
HiroKenEzandClaude Opus 5.5 5bb3b6717f Equation curves: the variable can carry its range's unit (#9333) (#9549)
* claim: #9333

* Equation curves: the variable can carry its range's unit (#9333)

A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:54:06 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 5b6e5815a3 Engine: lower the per-command cost of evaluating large designs (#9615)
* claim: Engine: lower the per-command cost of evaluating large designs

* Engine: lower the per-command cost of evaluating large designs

- The fingerprint texts of features are kept in one store shared by every
  worker, not per worker: a command evaluated ahead runs on a new worker each
  time, where the per-worker store was always empty and every feature was
  written out again. Same texts, same hashes.
- Pinning body names after a command keeps, per feature, the names of the
  bodies it made with the state they were read from, so it no longer searches
  every result's bodies (features x bodies per command), and finds results by
  their index before searching.
- Pinning fingerprints the timeline again only from the first renamed feature
  (or a pattern or mirror of features replaying one) when the model proves its
  fingerprints are the design's; the fingerprints are those of the full pass.
- The evaluation cache's byte count looks bodies and sketches up instead of
  searching them per body (bodies squared per feature). Same counts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:51:16 +00:00
Dahak BuildsandDahak Builds a2365228ab eval_more: one FaceSlice value for the face helpers (#2684) (#9960)
* claim: #2684

* eval_more: one FaceSlice value for the face helpers (#2684)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 09:52:29 +00:00
austin62jakeandClaude Opus 5.5 b5fe8776b5 Assembly: default names skip names in use (part of #9738) (#9898)
* Claim part of #9738

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assembly: default names skip names in use (part of #9738)

Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 08:28:50 +00:00
austin62jakeandClaude Opus 5.5 3c0d4e120e Linked designs: one changed while the assembly was closed is read again when it opens (#9739) (#9872)
* Claim #9739

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: one changed while the assembly was closed is read when it opens (#9739)

A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: read what changed last when a design opens in place of the blank one (#9739)

A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 07:28:24 +00:00
PaddleStrokeandClaude Opus 5.5 72a265e4fc Nightly action matrix: a sketch on the sensor enclosure lid's top keeps its attachment (#9465) (#9670)
* claim: #9465

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)

The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.

A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:02:24 +00:00
Colin Faulkingham f73479ddf2 Preserve multiline fields and accept a BOM in parameter CSV imports (#9732) (#9772)
* claim: #9732

* fix(params): preserve quoted CSV records and BOM headers (#9732)
2026-10-31 00:46:57 +00:00
Colin Faulkingham 0fe5bf114c Timeline: resolve exact feature names before ID fallbacks (#9689) (#9748)
* claim: #9689

* Resolve timeline names before falling back to feature IDs
2026-10-31 00:08:24 +00:00
bherbruckandClaude Opus 5.5 045cfed6a7 Release 0.28.0 (#9766)
Fold the pending design format changes (browser-nested-groups, point-cloud-properties, print-faces) into format 45.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 19:50:02 -04:00
Homero Thompson 806adb6c46 A sketch curve id that breaks a name is refused (#5858) (#9606)
* claim: #5858

* fix(#5858): a curve id that cannot be written into a name is refused
2026-10-30 19:53:51 +00:00
HiroKenEzandClaude Opus 5.5 db0c25522e Render: a size the CPU profile can't render names the profile that can (#8941) (#8943)
* claim: #8941

* Render: a size the CPU methods refuse names the profile that renders it (#8941)

The Shots strip offers 4K UHD whatever the method. Under the default CPU
raster, and under CPU ray tracing's default Compact profile, Render was then
refused with English engine text that didn't say how to render that size.

The refusal is now translated and names the smallest CPU resource profile that
admits the size (with CPU ray tracing, for raster, which has no profiles). The
size lists mark such presets. Nothing is switched: method, profile and
resolution still change only when chosen, and GPU path tracing is unaffected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 18:16:36 +00:00
Steven WatersandClaude Sonnet 5.5 4ba6a9744b Browser: allow nesting groups and re-ordering groups & components (#9109) (#9116)
* Browser: nest groups and reorder components

Groups can hold other groups (up to 8 levels) and be reordered with the
items around them. Sub-components can be reordered too, through a new
`components` list in `browser_order` that is not drawn as a folder.

Document: `BrowserGroup` gains `parent`; group items and `browser_order`
lists hold `BrowserEntry` values (a number is a group, a string an item).
One pending format file; older designs read unchanged. Loading and
refreshing drop what the lists name that is gone, and cut cycles and
over-deep nesting to the top level.

Engine: `browser.group` takes `parent`; `browser.move`, `browser.order`
and `browser.ungroup` handle groups. A change to only the browser's
groups and order no longer re-evaluates the model.

UI: nested rows, dragging a group row (top of a row: before it, the rest:
into it), New Group inside a group, and dropping a placement on the top
of a sibling to reorder it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed formatting

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed unintended side effect in render scene browser test

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Preserve group order in render workspace

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Increased test coverage

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Updated clipboard test from upstream main for group item type

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-30 17:40:33 +00:00
phanoobandClaude Opus 5.5 634f0a2308 Sketch text: number parameters in the words, and = for a formula in Edit Text (#9281) (#9386)
* claim: #9281

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch text: a number parameter in the words shows its value (#9281)

A text's words expression can now name a number parameter: `'W' + Width`
reads "W85 mm" (lengths in the design's units, angles in degrees, up to
three decimals). `number(Width)` drops the unit and `number(Width, 2)`
fixes the decimals. The words and the cut follow a parameter edit in the
same rebuild, a rename reaches inside number(), and deleting the parameter
is refused while a text shows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch text: a Text starting with = builds its words from parameters (#9281)

In Edit Text, a Text that starts with = is the words' expression
(='W' + number(Width)): OK keeps it, the dialog shows it again with its =,
and an untouched OK no longer turns it into typed words. Typed words still
replace it, and a saved text that happens to start with = stays typed
until it is edited. The field's tooltip says how.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch text: the formula hint in every complete catalog (#9281)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 17:28:31 +00:00
0396b2d00a Model cache: a design with mesh bodies keeps its saved model (#9170) (#9218)
* claim: #9170

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Model cache: a design with mesh bodies keeps its saved model (#9170)

One mesh body (an inserted STL or 3MF, or a STEP part shown as a mesh of
its faces) left the model cache out for the whole design, so opening it
evaluated every feature again. The doc records refused mesh bodies, and
the native B-rep codec the io cache stores bodies with refuses them too.

Kernel work is paused, so the kernel is left alone: the io cache stores a
mesh body as its own slice kind (SCMESH01, a JSON header with the counts,
colour and paint, then the vertices as f64 and triangles as u32), read
back through mesh_body, with_color and with_paint. A mesh body is kept
only when its slice reads back as the same vertices bit for bit, the same
triangles, colour and paint. The decoder checks the counts against the
bytes before allocating. The picture shown while opening draws a mesh
body with its own triangles (native_preview_mesh refuses mesh bodies).

Cache version 4 -> 5; docs/design-container.md describes the mesh slice.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Model cache: decode mesh slices with as_chunks, as clippy asks

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-30 16:17:27 +00:00
austin62jakeandClaude Opus 5.5 3b3f860adc Sketch: Project takes a construction axis, not only X, Y and Z (#9324) (#9471)
* claim: #9324

* Sketch: Project takes a construction axis, not only X, Y and Z (#9324)

sketch.project with {"axis": "Axis1"} upper-cased the name, and the axis link knew only the
origin axes, so a construction axis failed with "unknown axis `AXIS1`". X, Y and Z (any case)
are still the origin axes; any other name must be a construction axis, kept as its feature names
it. The link finds the axis where the timeline before the sketch puts it (construction_axis_in,
as Revolve does) and projects it as an origin axis: its line in the sketch plane, or a point
when the axis stands square to it. Renaming the axis renames the link, as for a construction
plane's projection.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 15:51:57 +00:00
DuBearteandClaude Opus 5.5 5439bfc0b5 Expressions: a decimal comma inside plain parentheses (#9408) (#9447)
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:34:56 +00:00
Mario GeigerandClaude Opus 5.5 332f96c26a Point clouds: colour and filter by any property the file carries (#8816) (#8819)
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)

A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.

In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.

pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)

A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:02:29 +00:00
kaltenbrunnermarkusandMarkus Kaltenbrunner f331a0740b Model cache: write each set of sketch keys once, and build the states on threads (#9010)
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.

Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.

SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-30 13:28:16 +00:00
C.VengelsandClaude Opus 5.5 3c40edd12a Print face: Send to Slicer lays a body on its marked face (#8429) (#8433)
* claim: #8429

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Send to Slicer lays a body on its marked face (#8429)

A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)

Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: a light tint in the viewport and its strength in Preferences (#8429)

Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:18 +00:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 1e5eb1e3b8 Sketch: find profiles island by island, so dragging in a large imported logo stays smooth (#6896) (#9313)
* claim: #6896

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

* Sketch: find profiles island by island and say when the search is cut short (#6896)

Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.

Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.

The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:52 +00:00
jeromehzl 966b10e731 Sketch: a feature on a failed sketch names that sketch (#9075) (#9276)
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
2026-10-30 09:03:46 +00:00
Steve Jason 3d744cc8a2 A formula that is a bare number gets the design unit (#9261) 2026-10-30 06:42:04 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
bherbruckandClaude Opus 5.5 3e62553d9c Release 0.27.0 (#9106)
Fold the pending design format changes (sketch-equation-curves, timeline-joint-folders) into format 44.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 19:52:57 -04:00
SilentWolf75andCursor 355b486595 Parameters: unit-less numbers follow the other side's unit (#9015) (#9027)
* claim: #9015

Co-authored-by: Cursor <cursoragent@cursor.com>

* Evaluate bare length offsets in the design's units (#9015)

Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-29 21:52:23 +00:00
Colin Faulkingham 9c5a636987 Parameters: accept mixed-case text units (#8960) (#8985)
* claim: #8960

* fix: accept mixed-case text parameter units (#8960)
2026-10-29 21:11:16 +00:00
HiroKenEzandClaude Opus 5.5 c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
d6d6c7d9ee Copy and paste bodies and components between designs (#3511) (#3512)
* Components: copy and paste bodies and components between designs and components (#3390)

Squashed for the rebase onto main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* claim: #3511

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paste New: copy from a design other than the one pasted into

`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.

From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
  copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
  is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.

Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: paste bodies and components copied in another design

`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
  import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
  names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
  appearances, materials, joints and motion inside them; joints to the outside stay behind.

Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: copy in one design, paste in another

Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.

The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.

Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: what is selected wins over a design row picked earlier

Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Put the Paste from Another Design label in the pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: unground the placement before moving it (a design's first part is grounded)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop locale keys main already folded into en.json

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Paste from Another Design in the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:31:09 +00:00
FrankandCopilot 162b3cd4ed Sketch Intersect: add Faces/Bodies and Projection Link options (#1110) (#7989)
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)

Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Select Other: label curves from Intersect as intersected (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-29 16:09:18 +00:00
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
semmelrindeandClaude Opus 5.5 2d56f5d599 Construction: a vertex where another body's edge runs past stays its corner (#8650) (#8722)
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 08:03:31 +00:00
NOWN-DEVandClaude Opus 5.5 dd8308e835 Naming: a face swept from one of many sketch curves is named without measuring every curve (#8643)
Naming a face swept from a sketch flattened every curve of the sketch to
a polyline and measured its distance to each, for every face. On a sketch
with thousands of curves (a sheet with many cut-outs) that grew with
curves times faces. The curves are now flattened once per feature, each
with its box, and a curve whose box is farther than the best distance so
far is not measured.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:12:56 +00:00
Colin Faulkingham 99664a4d35 fix: keep expression move distances on world axes (#7234) (#8508) 2026-10-29 03:39:39 +00:00
semmelrindeandClaude Opus 5.5 800b6b4486 Saved model: read text records up to 16 MiB, so a long warning keeps fast opening (#8541) (#8607)
Open refused a saved model whose text records (a feature's warning, a body or
sketch name) held more than 65,536 bytes, although Save writes them, so such a
design was evaluated again on every open.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 01:52:21 +00:00
raykholo 0e01dc9bad Pattern counts: say when a parameter has a length unit, and refuse fractional counts (#5066) (#5337)
* claim: #5066

* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)

A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
2026-10-29 01:00:10 +00:00