* claim: #4451
* fix(#4451): the body colours travel with the OBJ file
An OBJ export left the colours of the design behind: the mesh file named no
material, so every body arrived in the reader's default grey. The export now
writes a material library (.mtl) next to the mesh file, with a material per
body, and the mesh file names that library with mtllib and picks the material
of each body with usemtl. Every path is checked before anything is written,
the library goes first and the mesh file last, so a mesh file never names a
library that is not there. Only the colour of the body travels: the colours of
single faces and the transparency of a body stay out, as a face colour needs
material groups inside one object. The export that writes one file stays
material-free, so it never names a library it does not write.
* claim: #7274
* Renaming an imported body with numbered siblings evaluates nothing again
Since #2467, Model::rename_body evaluates the design whenever another body's
name is worked out from the renamed one's (`X (2)`). Every STEP import whose
solids share a label has such names (`Part`, `Part (2)`, ...), so renaming
one of its bodies re-read the import and meshed every body again.
body.rename keeps the names of a body's siblings and of later bodies named
after it, so for a body no later feature changes (the same mesh from the
feature that made it to the end), renaming it in the model gives the names
evaluating the renamed design gives. That case is followed again, as before
#2467; bodies later features change still take #2467's checks.
A cut (or intersect) that names no bodies went through every body it met,
hidden ones too: a body hidden to keep it out of the cut was cut anyway. When
some of the active component's bodies are hidden, the cut now stores the shown
ones as its targets, so the hidden bodies stay as they are, and stay so once
shown again (the model never depends on what is shown). With nothing hidden it
goes through every body it meets, as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5641
* Cone primitive: solid.cone with base and top radius (#5641)
A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6724
* Extrude: the picked region is the one extruded again (#6724)
Since #5530 (#5302) every index or point pick grew to the whole drawn
profile that reference geometry cuts, so a lens or crescent clicked in
Extrude, where the face's projected outline cuts a circle, extruded the
whole circle while the dialog highlighted and counted one region.
Dialogs now send exact_regions: true with their profile picks, and the
command keeps each pick to the region it names. Picks without the flag
(scripts, agents, the CLI) still take the whole drawn profile (#5302).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With Start set to From Object (or a start offset), the automatic
operation was still decided from the profile: the engine probed for
material just past the profile plane, and the dialog kept the operation
it had latched before the start changed. A profile on a plate's top,
extruded 14 mm down from the plate's bottom face, came up as Cut instead
of Join. The engine now probes from the extrude's start (and, to an
object, reaches from there), and the dialog decides the operation afresh
when the start changes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5302
* Extrude: a picked profile takes the whole drawn profile (#5302)
A sketch on a solid's side face holds the face's outline as projected
reference geometry, and that outline cuts the drawn profile into pieces
of the sketch's graph. A pick by index or by point resolved against those
pieces, so extruding a rectangle that straddles the face's edge took
only the piece under the cursor.
The pick is now expanded to the drawn profile it belongs to, so it takes
every region of it. The drawn profiles are the disjoint faces of the
drawn graph, so an explicit pick of a drawn hole still fills only that
hole (#5176).
* Extrude: a pick expands across the reference geometry that cuts the drawn profile (#5302)
The expansion crossed every region of the drawn profile, so a projected curve that bounds a region inside the profile (the rim of a counterbore) was crossed too and the cut took more material than intended; now the expansion stops at that boundary. Fixes the regression in cmd::features::prism_local_tests::a_ring_cut_round_a_counterbored_hole_in_a_chamfered_disc, and keeps the behaviour of #5302 and of the #5176 invariant.
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first
`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.
joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where
`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: read what made a face, its kind and its feature ids through persistent_name
The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.
- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).
Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: an edge holds one face or more; made_by reads only the leading token
An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* persistent_name: split into lexer, parser, write, text and tests
No code changed; callers' paths stay the same (`pub use text::*`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4098
* Extrude: document which way a positive taper goes (#4098)
A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* claim: #4100
* Deleting an inserted file removes its components, placements and joints (#4100)
A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.
Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.
* Only an inserted file's feature takes its component tree when deleted
Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
* Renaming a body that later features change evaluates nothing (#2467)
Model::rename_body now keeps the results when later features change the
body (a pattern, a chamfer, a join). It still evaluates when a body of
that name comes and goes or isn't the same body throughout, when a later
body's name is worked out from it (X (2)), or when a message quotes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename box: rename off the window thread, and locked bodies follow a rename (#2467)
The rename box commits body.rename through run_heavy, so a rename that
still evaluates later features (one names the body in its targets)
computes beside the window instead of freezing it. Locked bodies now
follow a body.rename from anywhere (the rename box, the control channel,
scripts), not only the rename box.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the profile library (#4003)
The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).
- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
with defaults worked out from the profile's size, refusals that name the
dimension that does not fit, anchors and placement, and exact section
properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
density) and frame.profile.insert (draws a profile into a sketch, locked by
default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
extrusion volume, undo; catalog entries in every locale; docs/frames.md;
ROADMAP M15.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: drop the built-in T-slot profile (#4003)
Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: members along frame sketch lines (#4003)
frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:
- profile: a built-in profile, or profile_sketch, a sketch whose material
(nested loops alternating, so two circles make a tube) is the section in
its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
reopen (format: pending/frame-members.rs), and are named after the profile
(Rect Tube 40x40x3, (2)…), numbering on past names already taken.
Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: fixes from the adversarial review (#4003)
- Default member lines are what was drawn: projected and other linked curves
and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
solid.extrude's "all" does, so a section sketched on a face works; the
even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
is the base): deleting or adding a line, or deleting another feature, no
longer renames other members, and frame.member stores every name it gives.
body.rename renames a member on its line (also for later member features);
a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
parameters, bare numbers take the design's units, and they are feature
inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
given are checked by name; a radius must be 0 or at least 0.01 mm; error
messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
refused; a 3D wire that runs back on itself is not a line.
Regression tests for each, from the review's scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the Frame Member dialog on the ribbon (#4003)
- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
picked in the view (or All Lines), a built-in profile and its dimensions or
a section picked in another sketch, anchor, angle, mirror and name, with a
live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
(the dialog shows the sketch instead of picking every region, which would
fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
thickness, so they translate apart from the existing Angle, Web and Flange;
the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
command labels it spells the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section Analysis: a Hatch option, off for a plain cut in the body's colour (#4563)
The Section Analysis dialog gets a Hatch check box beside Flip, and
inspect.section a hatch?: bool (default true), so scripts, the CLI and the
control channel reach it too. Hatched, a cut is its body's colour tinted
toward the cap colour with 45 degree stripes, as before; off, it is the
body's own solid colour. The viewport (cap alpha in the uniform), the CPU
rasterizer and ui.render follow it, and the section keeps it when hidden
and shown again or edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* Format
* claim: #5172
* Extrude without profiles keeps nested loops as holes (#5172)
With no `profiles`, solid.extrude took every region of the sketch, so
circles drawn inside a plate outline were extruded as well and filled the
plate's holes. The default now applies even-odd nesting to the drawn
profiles: a loop inside an outline is its hole, a loop inside that hole is
material again, and separate outlines all extrude. Sketches without nesting
keep the `all` selection, and explicit `profiles` (including "all") are
unchanged. Saved designs store their selection, so they recompute as before.
* Joint drive moves parts without evaluating them
A joint drive (also the Drive dialog and motion steps) changes only occurrence transforms, yet it
re-evaluated nearly the whole timeline: every feature that might read another component's
geometry (a sketch with any link, even to its own axis) hashed every occurrence's transform into
its fingerprint, so any motion invalidated it and everything after it, and no new pose was ever
in the cache.
- Placement digest: a feature now hashes only where the geometry it actually reads lies relative
to its own frame (link sources, anchors, profiles and paths from other components, mirror
placements; To Object and face/edge-picked planes read every component, relatively). Moving
parts that keep those relative placements leaves every result in place: nothing is evaluated
or re-meshed. In-context features whose referenced part really moved still rebuild.
- Evaluated ahead, applied once: `Ahead::evaluate` returns what it evaluated and
`Session::prime` lets the window-thread pass take it (history commands and dialog OK), so an
off-thread command no longer costs twice on designs past the cache's budget.
- Contact meshes are kept per body geometry across drives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Joint drive: booleans read only their input bodies' placements
A join, cut or intersect with named targets, and a Combine, read every
placement, so a joined part transferred to a component re-ran its boolean
at each new joint pose. Each now hashes only the placements of the bodies
it actually takes as inputs, resolved in its timeline input state (before
any later BodyTransfer), relative to the frame that evaluates it; Combine
reads its tools relative to its target. Unresolved and legacy component or
path reads keep the conservative dependency. 24 new joint_pose_ tests
cover new angles, transfers, targets, save/reopen, undo and real relative
motion (900 -> 800 mm3).
Supplement offered on #3397 by takuto-NA.
Co-Authored-By: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Creating a component recomputes nothing
A new, empty component changes nothing a feature reads, yet it changed
the placement fingerprint of every targeted boolean, Combine and To
Object feature, so `component.create` evaluated the timeline again:
- the first component of a design: `placement_digest` returned 0 while
the design had no placements and a nonzero value once it had one;
- To / From Object and legacy face- or edge-picked planes hashed every
component, not just those holding the bodies, sketches and
construction geometry the feature can reach.
Co-Authored-By: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test: creating a component after a legacy face sketch recomputes nothing
A face extruded after its construction certificate is gone (a patterned
cut, a pad joined flush with it, then one more cut) is sketched on a
legacy face plane, which reads every placed body. A new, empty component
must not change what it reads either (reported by Tyler Chiriboga).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
* Sketch Dimension: `name = value` defines a user parameter (#2916)
In a dimension's value (the D tool's box, and `sketch.dimension`'s `value`
from scripts, the CLI, MCP and the control channel), `name = expression`
adds the user parameter `name` with that expression and dimensions with
`name`: typing `width = 40` on a line gives a 40 mm user parameter `width`
and a dimension whose expression is `width`. A bare number is read in the
design's unit, as a bare dimension value is; an angle's parameter is in
degrees. The expression may be anything the parameter editor takes.
It is one command: one undo removes the parameter and the dimension
together, and a dimension the sketch refuses leaves no parameter behind.
A taken name is refused with a hint (type the name to use it, or change
it in Parameters), a reserved name with the parameter editor's message,
and a left side that is not a name (`2 = 3`) still fails to parse as
before. A driven dimension defines nothing. The reply carries `defined`,
and the status line names the parameter.
The splitter lives in the doc crate (`expr::definition`) so other value
inputs can take the same form later; editing an existing dimension, the
inline shape boxes and feature dialogs are follow-ups.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension: say why a name is refused, in the command's own words (#2916)
The dimension editor showed a refused definition raw, in the box and the
status line: "invalid parameters for `sketch.dimension`: value: `mm` is a
unit, constant or function name". It now reads "Sketch Dimension: `mm` is
a unit name, so it cannot be a parameter name": the editor passes the
command's errors through `friendly_error` like every other command, and
drops the `value:` field tag, since the box is the value. The taken-name
hint reads the same way: "Sketch Dimension: there is already a parameter
`w`: type `w` to use it, or change it in Parameters".
A reserved name says what kind of word it is and what that means
(`param_name_problem`, shared with the Parameters dialog): a unit name, a
function name, or a constant, "so it cannot be a parameter name";
`expr::reserved_kind` tells them apart.
`friendly_error` translates the command label with the interface language
(the engine's sentence stays English), so the prefix reads "Wymiar szkicu:"
in Polish.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension test: keep the third line off the ribbon (#2916)
On current `main` the ribbon floats over the top of the canvas, and the
test's third line at sketch y = 50 projected under it: the click opened
Parameters instead of picking the line. The line now goes below the
first one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #3242
* MCP batch: rollback restores the design the batch began in (#3242)
A failed batch with rollback: true reported rolled_back: true even when the
design never went back. Two defects, both fixed:
- file.new (and any document-replacing command) replaced the session with it,
taking its checkpoints down too, so a batch that failed after file.new had
nothing to restore. Session::replace_design now carries the checkpoints over
to the fresh session: the checkpoint belongs to the batch, not to the
session that happened to be holding the document.
- rolled_back echoed the requested flag. It now reports whether the design is
actually back: the app answers engine.batch with a new restored field, and
the MCP tool reports restored && rollback. An app that predates the field
falls back to undone/completed.
* Batch: answer with main's rolled_back field after the merge (#3242)
Upstream #2900 put the real restore check on engine.batch as
`rolled_back` while this branch named it `restored`; the merge kept
main's control test and this branch's field, and CI caught it.
Standardize on main's wire name: the app answers `rolled_back`, the
MCP tool reads it (fallback for older apps unchanged), docs and tests
follow. The checkpoint carry-over across file.new is unchanged.
---------
Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
* perf: renaming a feature evaluates nothing (#3044)
A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)
Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On an imported part with 2.5 million triangles, every frame of a Section
Analysis drag looked up the picked face's plane several times (each lookup
tessellates the whole body, about 0.1 s) and cut every triangle again for
the outline (38 ms).
- planar_face keeps its last answers for the model state they were found in.
- The outline cuts through a SectionIndex: the mesh's triangles sorted into
slabs along the cut's normal, kept per mesh while the normal stays, so a
cut looks at one slab (0.06 ms on that part) and finds the same segments.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A body rename changes names only, but committing it went through the general
"design changed" path: the whole timeline was evaluated again. On an imported
assembly that means reading the STEP file again and meshing every body (about
100 s on the Prusa Core One, and the same again for undo).
When the only change from the previous design is one body rename (the
features' stored body names and the body-keyed maps the rename updates), the
model now renames the body in its results instead: every body keeps its
geometry and meshes, and the fingerprints are set to the renamed design's so
the next evaluation reuses everything. Undo and redo of the rename take the
same path. A rename the model can't follow that way (the body is changed or
named by a later feature, sheet metal, threads) still evaluates the design as
before.
`bench-open --ops script.json` times commands and their undo on an opened
design, with the view work each leaves.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)
A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.
Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.
Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)
The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.
Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: `seam` picks where each chain's stations start (#764)
A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: a test between two tube rims, their seams picked and saved (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)
SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)
A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* blend: review clean-ups (#764)
- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
share body_and_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#1949 joined the straight runs of a profile into one side face for straight
extrudes; tapered extrudes (extrude_tapered, extrude_tapered_between) still
sloped each piece as its own face, so a drafted mirrored profile kept the
edge. They now join the runs the same way (NumberedLoop::merged_lines), the
sloped side generated by every piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)
Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: classify display edges of a face with a closed-edge hole without a panic
A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)
keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)
The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>