Commit Graph
1599 Commits
Author SHA1 Message Date
1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
bherbruckandClaude Opus 5.5 f1f5298bc5 Agent instructions: one source in AGENTS.md; CLAUDE.md imports it (#3240)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:02:11 -04:00
bherbruckandClaude Opus 5.5 15db51304e Agent instructions: a regression test goes into its area's test file, not a new per-bug file (#3230)
Refs #3226.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:53:34 -04:00
bherbruckandClaude Opus 5.5 b00d45cc7b Open: draw the Home picture after the design opens (#3053) (#3140)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:44:06 -04:00
bherbruckandClaude Opus 5.5 f3505f0db6 World placement on all cores (#3053) (#3123)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:43:22 -04:00
e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
fkirill 3b4db52c10 Respect display units in sketch fillet fields (#2420) (#2487)
Thanks @fkirill.
2026-10-19 10:38:48 -04:00
SS-EN fb82ccb273 Timeline/MCP API: suppress lists, dotted edit keys, set_parameter expression (#2899)
Timeline and MCP edits take suppress lists, dotted edit keys and parameter expressions.
2026-10-19 10:14:23 -04:00
SS-EN 3115c50359 Chamfer: two distances and distance + angle on curved edges (#2893)
Two-distance and distance + angle chamfers work on curved edges.
2026-10-19 10:14:18 -04:00
fkirill 5bed5196c7 Fix lens-profile cuts into revolved quarter spheres (#2791)
Lens-profile cuts into revolved quarter spheres now build (#2750).
2026-10-19 10:14:12 -04:00
fkirill b4e049f9a6 Preserve equal-radius fillet mitre tangency (#2485)
Equal-radius mitres keep their endpoint tangent so a later fillet can select the chain (#2422).
2026-10-19 10:14:07 -04:00
takuto-NA b76302e850 Assembly: reuse reference meshes during rigid joint motion (#2922) (#2924)
Thanks @takuto-NA.
2026-10-19 09:15:26 -04:00
SS-EN 771f62be71 Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN.
2026-10-19 09:14:52 -04:00
fugazister aee47fca00 Messages window: keep status messages to read and copy again (#2763) (#2764)
Status messages are kept for the session in a Messages window (Help menu, or click the status chip), newest first, with Copy all.
2026-10-19 09:09:35 -04:00
The Nomad 4c30d944f5 3D mouse: only the window with focus moves (#2077) (#2212)
With two windows open, the 3D mouse now moves only the one with focus.
2026-10-19 08:48:06 -04:00
bherbruckandClaude Opus 5.5 5f399207bf CI: a translation change tests the UI and xtask, not the whole workspace (#3061)
assets/locales/ belongs to no crate, so affected.py selected the full
workspace (every crate, all four test shards) for a catalog-only PR. Only
solidcraft-ui-egui embeds the catalogs and xtask checks them; map the folder
to those two packages and their dependents.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 08:31:49 -04:00
SS-EN 7fd51ce6a5 timeline.roll_to: accept "end", refuse other non-number positions (#2902)
A position that is not a number or "end" is now refused instead of moving the marker to the end.
2026-10-19 08:18:01 -04:00
rlartot aef13b52f4 Pattern and Mirror copies of a primitive change only the seed's targets (#2755) (#2756)
Thanks @rlartot.
2026-10-19 07:44:40 -04:00
JIJINBEI 355154fa9b refactor: geom::Grid for control nets; one surface fit through a grid of samples (#2331)
Thanks @jijinbei.
2026-10-19 07:39:22 -04:00
github-actions[bot] f1a5f4ab30 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-19 11:38:55 +00:00
takuto-NA 3a9b053f5b Fix constrained point dragging within the shared frame budget (#1976) (#1977) 2026-10-19 07:24:04 -04:00
amolinari-autotex aaa35a94d8 Relink a linked assembly source from the Browser (#2772) (#2773)
Thanks @amolinari-autotex.
2026-10-19 07:14:33 -04:00
Colin Faulkinghamandbherbruck 852d364d5f Preserve curved face picks when reopening modeled threads (#2265)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 07:14:07 -04:00
Jacques 34cb3167b6 Sketch: trim keeps the rest of a dimensioned line where it was (#2910)
Thanks @Jacquesvdberg92.
2026-10-19 06:44:50 -04:00
abteenz 1666ca7018 Fix the macOS launch hang with the 3Dconnexion driver installed (#2841)
Thanks @abteenz.
2026-10-19 05:54:43 -04:00
NOWN-DEV 768e69c4c7 Joints: a new joint between faces that already meet leaves the part as it is (#2709) (#2710)
Thanks @NOWN-DEV.
2026-10-19 05:54:21 -04:00
bherbruck 5997d28de7 STEP import: orient each instanced part once (#2814) (#2875)
Thanks @bherbruck.
2026-10-19 04:07:39 -04:00
bherbruckandClaude Opus 5.5 5122b98af3 Parameters window: no per-frame re-evaluation on big designs (#2723)
The window listed (and so evaluated) every parameter and re-checked the add row's
expression on every frame, and laid out every row. It now lists once per design
revision, caches the add row's check, and lays out only the rows in view.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 02:16:36 -04:00
bherbruckandClaude Opus 5.5 f9342aa8b6 Malay: drop the "Gap" entry that is not in the English catalog
The catalog test rejects ids English doesn't have.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 00:38:57 -04:00
bherbruck d9c3fdb80f Agent chat: drops on the popped-out window attach (#2812) (#2861)
The chat in a window of its own takes the files dropped on it and shows the drop hint while files are dragged over it; a window floating inside the app counts as the chat's place for the app's drop handling.
2026-10-19 00:03:11 -04:00
bherbruck dc27988bc2 Agent chat: PDFs as documents, any other file by reference (#2812) (#2858)
A PDF goes whole to agents that take embedded documents; to the others, or past 12 MB, the message names it with its type, size and place. Any file that is not a picture, text or CAD file is attached by reference instead of refused. Chips show the type's extension; the file dialog offers All files.
2026-10-19 00:02:29 -04:00
bherbruck e3831b05d4 Agent chat: Ctrl/Cmd+V attaches copied files and pictures (#2812) (#2854)
Files copied in the file manager attach as files, a picture on the clipboard attaches as a picture, text pastes as text. A picture-only or files-only paste is seen through the V key coming up (egui-winit sends nothing when the clipboard has no text); macOS sends no key-up while Cmd is held, so there only pastes that come with text are seen and + > Paste a picture still works.
2026-10-18 23:30:21 -04:00
bherbruckandClaude Sonnet 5.5 59ba87103e CI: heavy checks run after review (approved-for-ci label) (#2689)
* CI: heavy checks run after review (approved-for-ci label)

Pull requests without the approved-for-ci label run Select checks, the
format and repository checks and a quick cargo check. The label runs the
full suite, and every push after that does too. Other labels start no work
and never cancel a run. Main, merge groups, nightly and Run workflow are
unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* CI: approved fork PRs run heavy jobs on self-hosted-fast in private directories

An approved-for-ci label on a fork pull request sends Clippy, Build tests,
the test shards and Doc tests to the trusted runners, with private copies
of the build directory, Cargo home and rustup home that are deleted after
the job. Only the labeling event qualifies; later pushes use the old fork
routing. The skipped run of an unrelated label names its ci job differently.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Revert "CI: approved fork PRs run heavy jobs on self-hosted-fast in private directories"

This reverts commit 439f2f7dab.

* CI: name the ci job differently on an ignored label's skipped run

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 23:28:17 -04:00
bherbruckandClaude Opus 5.5 19ffb0dd75 Orbit drags turn from where they began, so erratic drags don't drift (#2842)
An orbit drag now applies its whole turn so far to the camera it began
with, instead of adding each pointer step to the camera of the step
before. The view then depends only on where the pointer is: dragging
past straight up or down and back no longer loses the pitch that the
clamp swallowed, and returning to the starting point brings back the
starting view. The pivot is still picked once, when the drag begins,
and kept still on screen by the rigid turn about it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 23:12:55 -04:00
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
NOWN-DEV 57d210130c Assembly: place an occurrence or an inserted STEP file by a matrix (#1890) (#1901)
Thanks @NOWN-DEV.
2026-10-18 22:03:20 -04:00
SiroArt 71534117af Mesh a face thinner than the tolerance instead of leaving a hole (#2712)
Thanks @SiroArt.
2026-10-18 21:56:28 -04:00
github-actions[bot] 38f6ed76c9 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-19 01:41:22 +00:00
A.Hakim Noor 66108a6b99 Add Malay language support and update localization doc (#2188)
Thanks @a-hakim.
2026-10-18 21:34:54 -04:00
CypherNaugh_0x 8e762fee57 Add optional ambient occlusion and graphics quality presets (#1135)
Thanks @CypherNaught-0x.
2026-10-18 21:29:03 -04:00
phanoob 6b1fc16d47 Sketch projection: a solid's edges come in as their exact curves (#1508)
Thanks @phanoob.
2026-10-18 21:23:11 -04:00
bherbruck 1ea85ff231 Merge pull request #2831 from tangency-labs/ci-fast-runners-main-only
CI: repository checks keep off the fast runners for pull requests
2026-10-18 21:18:10 -04:00
bherbruck 2aa808b116 Merge pull request #2303 from tangency-labs/sketch-grid
Sketch: always show a grid on the open sketch's plane
2026-10-18 21:16:52 -04:00
CamWightandClaude Opus 5.5 aa438611a7 S command search and the new design's name: shown and matched in the current language (#2544) (#2555)
* claim: #2544

* S command search and the command line: names, places and matching in the current language (#2544)

The S box showed each command's English label and toolbar place in every language, and found
only what was typed in English; the command line matched English only too. Rows, places and
tooltips now go through the label lookup, and the query matches the translated label, tab and
panel as well as the English ones and the id. The pin tooltips get catalog entries.

A new sweep (i18n_painted_tests) runs every language, reads the text each frame paints, and
fails on English painted where the language has a translation, skipping the design's own names
and key names, so a painter call that skips the lookup can't come back unnoticed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* The painted-text sweep also covers every Preferences page and four right-click menus

Each surface must show (the Preferences title in that language, or new text for a menu), so the
sweep can't pass by painting nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* S box rows: labels stay 'static; the place's separator is drawn, level in every language

A font's "›" (and one centred on the row) sits on the baseline beside Japanese or Chinese words,
where it reads as a comma. The separator is now a drawn chevron (glyphs::breadcrumb) centred on
the ink of the panel's name. search() returns the place as (tab, panel).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A new design's name, Untitled, shows translated in the browser too, like the other default names

The tab and the save prompt translated "Untitled" through their own special case; the browser's
top row showed it in English. It is now one of the default names the label layer translates
(Locale::default_name, with Sketch1, Body2, Component3), so every place that shows a given name
shows it translated, and the two special cases go. The painted-text sweep no longer skips a design
name that the language translates, and splits a tab's dirty mark off, so it catches a place that
shows the raw name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:48 -04:00
leValdemar19andClaude Opus 5.5 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
c177adfceb Clearance: check a shared volume against the union, allowing for the bodies' measuring error (#2090)
* Clearance: check a shared volume against the bodies and their union

An intersection can come out well formed and still wrong: one of a
mirrored pair of imported parts shared three times the volume of its
twin. The shared volume is now compared with vol(a) + vol(b) - vol(a ∪ b),
on the same (cut down) bodies; when they differ by more than 1 % (plus the
bodies' own measuring error), the pair is reported unchecked with both
numbers. Where the union gives no answer, the intersection stands.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: let the union cross-check allow for the bodies' measuring error

vol(a) + vol(b) - vol(a ∪ b) is a difference of measured volumes and
carries the error of all three, so correct small overlaps on large bodies
came back unchecked (0.96 mm³ where the union implied -0.75). measure
keeps a face's fine tessellation when it is within 1 % of one with a
5 times coarser chord, so a measured volume can be off by up to 0.25 %:
the allowance is now 1 % of the larger of the two answers plus 0.25 % of
the three volumes. Past it, a union that implies nothing (within that
noise of zero, or below it) while the shared part is at most a tenth of
the smaller body cannot tell, and the shared part stands. A shared part
of 412 mm³ where bodies of a few thousand imply 141 is still caught.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: tighten the union check's measuring allowance to 1e-4

The old note cited measure's 1 % gate, which compares face areas, not
volumes, and its 0.25 % was about 100 times the disagreement the bodies'
measures actually show. The allowance is now justified from volumes: a
curved face's chord shortfall cancels between a body and the union except
where the chord changes, which stays near 2e-5 of the three volumes; 1e-4
leaves five times that. A 40 mm roller pressed 0.2 mm into a 2 m plate
exercises it: with no allowance the pair is left unchecked (7.52 mm³
measured against 8.16 implied), with it the overlap is reported.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 21:16:37 -04:00
JIJINBEIandClaude Opus 5.5 7ad5130cd2 refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: UnitVec3 adds to and subtracts from a Vec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc, engine: cylinder axes and measured normals held as UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, engine: functions that take a unit axis or direction say so by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: a face's normal goes to Plane::from_normal as is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:31 -04:00
ealitt a3080d02d6 claim: #2561 (#2562) 2026-10-18 21:16:25 -04:00
DuBearteandClaude Opus 5.5 17e173cb7b Construct tools ask for their picks instead of failing with "a is required" (#2474, #2494) (#2563)
* claim: #2474, #2494

* fix(ui): construct tools ask for their picks instead of failing (#2474, #2494)

The 13 construct tools without a dialog of their own ran their command with no
parameters from the toolbar and reported that `a` (or `face`, `edge`...) is
required. One pick dialog now serves them: labelled inputs per tool,
preselection fills them, and each pick becomes the construction reference the
command takes; Point Along Path keeps its position.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:20 -04:00
bherbruck 46bc44b706 Merge pull request #2821 from tangency-labs/ci-faster-shards
CI: faster test shards
2026-10-18 21:16:14 -04:00