The r3 on the top edge at x = 60 takes tangent_chain: false, so it
rounds that edge alone and not the r5 round's tangent chain with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit cf46e2a713c45ae0427e831cae1dc1d3b858febc)
seam_flags matched only an edge between two faces on one curved surface.
A whole turn of a cylinder is one face whose seam it uses twice, and
history::edge_faces lists that face once, so the seam came out as [x]
and was never flagged: it was drawn and picked, and a blend pick at the
vertex where it meets a rim (ladder 07-fillets/017's (23, 15, 20) on a
boss's base circle) resolved to the seam, which SMLib then rejected. An
edge both of whose uses lie on one curved face is now a seam too, for
every consumer of the flag (display, picking, blend resolve, projection).
The blend's own edge selection took the plain nearest edge: the tangent
chain seeded from it and grew into seams (a pick at the top of a boss's
seam ran down it into the base round's seam, ladder 08-chamfers/008), and
the variable fillet's edge and the fillet's grouping of picks could
differ from the edge the blend resolved. They now take the edges the
blend's resolve picks, and a chain never grows into a seam or a smooth
join.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit 709c19c7fd60db522d35e147f21821360bf34668)
Every feature command reads touching (separate | one_body) as it reads
participants; the box and extrude contracts declare it. A feature result
carries notice {message, contact, action} when its join kept solids
apart ("These bodies only touch along an edge, so they were kept as
separate bodies."), the action a timeline.edit that sets touching to
one_body; programmatic calls open nothing.
Tests adjusted: join_meeting_nothing_keeps_the_first_body now expects the
separate body and its notice by default and the old single body of two
lumps with touching one_body; the schema key lists and the
FeatureResult literal gain the new fields.
Engine tests whose subject is a body joined from pieces that share no
volume make it with touching: one_body (posts joined while apart, a
cube joined clear of another, a cylinder joined clear of a ring, a tab
joined in a component); a legacy design reopens with touching: one_body
on its emboss; the 0.1 mm gap of a_join_adds_only_its_sketch leaves the
block a body of its own; and the #3378 spoke starts 1 mm inside the hub,
so the join merges its targets instead of touching the hub along a line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit 7a2915fe32e6549cbf3170d69e0f5b6518e19da3)
A feature's touching parameter says what a join makes of solids that
share no volume and no area: separate (the default) splits the joined
body's pieces that share no face into bodies of their own, named, with
history and lineage, as a cut's pieces are; one_body keeps one body of
several pieces. The state records how the kept-apart pieces met
(KeptSeparate: along an edge, at a point, apart) for the feature's
notice.
Older builds kept every join's pieces in one body: the pending format
change join-touching-bodies gives each joining feature of an older design
touching: one_body, so existing designs keep their bodies.
kernel-cases 2896-join-arm-end-near-ring-wall-gap: the arm meets nothing,
so it now stays a body of its own (body_count 2, one shell each).
kernel-cases that join solids apart to make the body they test ask for
it with touching: one_body: 3379 (the hub joined to the ring before the
spokes reach it), 3455 (64 pegs in one body) and 3526 (a two-lump target
for an intersect).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit 2c2aaed86f4be60f7f88e40bc24b60de60085148)
Brep::region_contacts lists each pair of material regions that shares a
face, an edge (used by faces of both) or a vertex, with the most it
shares; pairs not listed are apart. Body::region_contacts reports it for
a boolean's result (lump positions as in Body::lumps), and Body::parts
cuts a body into groups of lumps (lumps is parts of one each). Exact
facts from the record only: no geometry, no decision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
(cherry picked from commit 64a1d688e68e5f0c5b1f9e4fe0d2facfaa4744be)
Every edge of the hand-written cube was a LINE along one filler direction,
trimmed by vertices up to 1 mm off it; the reader refuses such an edge (a
degenerate edge on a line). Each edge now has the line through its two
vertices, so the assembly, instancing and unit tests read a valid cube.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
of_faces gave every edge it was not told about the meeting of its two faces.
A builder (extrude, revolve, loft, a primitive) has no operands: every face it
makes is new, so its edges are new too (EdgeProv: empty when it is new and lies
between faces new to the operation), not where profile segments meet. With no
operands an edge's origins are only what the builder states.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
The display's smooth joins were certified only between ruled B-spline patches
along a Line record. SMLib gives an extruded profile's rulings as degree-1
B-splines of two control points, and sweeps a profile curve within tolerance of
an arc as a cylinder (a ring of 256 cubics is 512 cylinder faces), so no join
was certified. A straight edge is a line or such a B-spline; a plane, cylinder or
cone gives its outward normal along the edge in closed form at both ends (their
difference is the uncertainty, so an edge that is no ruling certifies nothing).
The closed-edge fixture cuts its hole with one circle: SMLib trims a loop of
eight cubics as eight edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
The kernel blends exactly the edges given; the Fillet and Chamfer features
expand each pick to its tangent chain (kernel::tangent_chain) before the call
(4593fd07). Six tests written before that passed one pick and expected the
chain: they now ask for it as the features do, with their analytic expectations
unchanged (10 faces along the rounded corner, the sphere corners of #1557, the
boss's half circle, the rounded rectangle's tiny end, the rounded box's loops).
blend_smlib's notes no longer say SMLib follows the chains.
fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole is left as it
is: it fillets every exact subset of the outer edges, and SMLib still fails some.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
A degree-1 patch of four control points on a parallelogram (a plane as an IGES
or STEP B-spline writes it) is that plane at every parameter, so its pcurves
take the plane's closed forms instead of going to SMLib (which drew the rim
circle of 3806's base as a 385-point spline).
SMLib may run a one-face sheet's loop against ours. A use's pcurve is the same
either way, so the loop's way round is read from an edge the face uses once and
every use is matched with it (3806 failed with 'a use SMLib did not keep').
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
A use with no closed-form pcurve (an approximated intersection curve on a cone,
a spline edge on a spline surface) no longer refuses its solid. Its face goes to
SMLib alone, an open sheet with the trims it has and without the others, and
SMLib makes those as it makes every trim it needs (GetOrCreateUVTrimCurve on
export); they come back on the record's parameters and the face is closed and
checked as before. The STEP reader takes the trim maker from the kernel
(read_solids_with, read_solid_with); read_solids stays exact-only.
Kernel lib tests: 490 pass, 239 fail (were 468 / 261; pushed head 475 / 254),
none newly failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
exact_pcurves gives each use's pcurve where it has a closed form (or is given)
and None where it has none, without closing the loops; pcurves_within closes
them once every use has its pcurve. TrimFace, TrimEdge, TrimUse and the Trims
trait carry a face to a kernel that makes the pcurves of the uses with none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
along took u or v the edge's own parameter at slope ±1. A rim SMLib makes (an
extruded or revolved circle, four quarters with scaled knots) runs the face's
quarter grid at another steady pace, and a closed rim's two ends are one point,
so neither its ends nor slope ±1 give its line. The pace is read from the edge's
points a quarter and three quarters along, unwrapped from the middle; the line
is taken only where it lifts onto the edge within the tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
Validation refuses a circle or ellipse edge, or a cylinder, cone, sphere,
torus or revolution face, without its NURBS form. Test fixtures are built on
forms; seam and domain defects use the form's parameter (one turn = 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
`Assembly::finish` (lip, emboss, delete face, and the other operations that take a body apart
and rebuild it) puts on a NURBS form every cylinder, cone, sphere, torus or revolution face that
none of its uses brings a pcurve to (over its boundary's extent on its label), and every edge
whose uses bring none and whose faces are planes, splines or on forms (a circle about such a
face's axis labelled on its frame). Their pcurves are then exact on the forms. A face or edge
with a pcurve of its own keeps the parameters that pcurve is on.
Rig and ladder unchanged (333/372, 101/116; 529 and 3368 flip between pass and a 40 s timeout
with the machine's load). The kernel tests of lip, emboss, delete face and assemble fail as
before (none new).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
sew and the STEP reader build a revolved face's NURBS form over `form::extent` (its boundary on
its label) instead of a pass of pcurves on the label, and compute its pcurves within the form's
box. The STEP reader gives revolutions their form too, and a trimmed swept profile its file's
trim range exactly (points on the axis fit either side of it). The STEP seam tests read edge
angles through `Edge::curve_interval`, intervals and domains being in the forms' parameters.
step 37/37.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
- A meridian of a sphere or a tube circle of a torus (a circle in a plane through the axis) has
its exact pcurve on the label: u fixed at the arc's azimuth, v its angle from the outward
radial, alpha + s t.
- A placed revolution has a NURBS form: its profile's control points turned about the axis on
the quarter grid from angle zero, weights multiplied, then its matrix; the record takes forms on
revolutions.
- `form::extent`: a face's parameter box from its boundary projected on its label (the collapsed
parameter at a pole bounds nothing; a boundary that never goes round covers the turn), what its
form is built over with no pcurve involved.
- A face that goes all the way round gets a form of exactly one turn, closed and so periodic.
- `along` projects inside the face's box (a spline extended past its knots, or a profile turned
past the face, has other preimages), and takes a closed form within the record's tolerance, as
the closed forms on analytic surfaces are.
Tests: fits are gone, so curves with no closed form on their face (a tilted circle on a sphere,
an ellipse on a cylinder, an intersection record, a curve weaving across a thread flank) are
asserted refused; the closed-spline fixtures are built as forms. geom 166/166.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
`On::fit` and everything it used (samples, least squares, breaks, filled poles) are deleted, and
the STEP reader no longer retries a face at ten times its tolerance. A pcurve is exact (closed
form, an affine image, or a straight line along a form's parameters) or the face is refused:
"not supported yet: no exact pcurve of <curve> on <surface>".
The rig and ladder are as with the fit (333/372, 101/116; none lost; 3806, already failing, now
refused on import). 16 unit tests that build sphere meridians, torus seams, closed spline
bands, intersection curves and surfaces of revolution on their labels now refuse: those paths
need meridians labelled on their face's meridian plane and revolutions on the quarter grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
A surface of linear extrusion or of revolution over a circle or ellipse built its profile with the
reader's own conic spline, on a parameter of its own; the profile is now `form::curve`, the form
its edges carry, so the surface's parameter along the profile is theirs and their pcurves are
straight. The reader's conic spline is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
SMLib holds every ellipse as an exact rational NURBS; the fork now sends ellipse edges with that
form and takes them back with it. The export reads an ellipse with its form as it reads a circle
with one (its frame turned so its angle grows along the form, its trims carried over as they are);
the import writes an ellipse on its form as its conic entry plus the NURBS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
`form::edge` is the one rule sew and the STEP reader share: a circle about a revolved face's
axis is labelled on that face's frame, and a circle or ellipse edge gets its form. The STEP
reader now gives every imported edge its label and form before any pcurve, and every
cylinder, cone, sphere and torus face its form over the extent its label's pcurves give; the
pcurves, the outer-loop choice and the turn-over test then run on the forms, and the record
carries them.
With the pcurve fit turned off, the STEP and IGES circle cases pass (8 of the 9 import cases
that needed it; 3208's ellipse on an extruded spline surface remains).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
A flat-pattern edge folded across a bend is a helix, which no NURBS is: sheet metal already
gives its 3D curve as degree-7 Hermite pieces of the fold, within 1e-7 mm. Its pcurve on the
bend is now built the same way, on the edge's own parameter: degree-7 Hermite pieces matching
the point and first three derivatives of its angle about the axis (through the form's quarter
parameter, by the chain rule) and of its height along it, broken where the angle crosses a
quarter (the form's parameter is only once differentiable there), halved until they lift onto
the edge within 1e-7 of its size. An approximation by construction from exact derivatives, like
the edge; nothing is fitted. B-spline and NURBS edges alike (a NURBS's derivatives from its
homogeneous form). Breaks within rounding of each other are one.
With the pcurve fit turned off, all 44 sew cases that needed it pass; with it on, all 44 pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
The bend's rim arcs carried frames of their own (x toward the arc's start), a fraction of a
quarter from the bend cylinder's, so their forms were off the cylinder's quarter grid and no
straight pcurve lay along them. `form::on_frame` relabels such a circle on the face's frame (the
same circle, its interval shifted); its form is then on the face's grid, its pcurve u = ±s + c.
`along` takes u or v as the edge's parameter either way along, offset. The volume test steps to
a pcurve's ends exactly (t0(1-f) + t1 f), as an interval's end may now carry rounding.
With the fit off, 38 of the 44 sew cases pass (from 29). With it on, the rig is unchanged
(333/372, ladder 101/116, no case changed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
Every circle and ellipse edge sew builds now carries its NURBS form, its interval in the form's
parameter; every cylinder, cone, sphere and torus face its form over the extent its label's
pcurves give; and every pcurve is computed on the forms, so a bend's rim circle is a straight
line on the bend and an affine image on the flange, exactly. The volume test evaluates the faces
on their forms. A form interval's end within rounding past its last quarter stays on it.
With the pcurve fit turned off, 29 of the 44 sew cases that needed it pass (from none); with it
on, all 44 pass as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
On a plane, a B-spline or NURBS edge's control points go through the plane's affine parameters
and the result is cut exactly (bspline::segment) to the edge's interval, so a circle's form gives
its exact pcurve on any plane. On a spline face (a NURBS form), an edge that runs along the face's
parameters at its own pace gets the straight (u, v) line it is: between its ends' parameters, or
with u or v its own parameter (a rim on the same quarter grid). Each is taken only where it lifts
onto the edge to within 1e-9 of the geometry's size; nothing is fitted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
A form's parameter is now the angle's quarter on its frame plus the arc's parameter in it, and a
form spans the quarters its interval needs (up to five for a turn). Every form on one frame has
the same parameter at the same angle, so a circle edge and the cylinder it bounds agree along it,
and an arc across the frame's x axis, or starting anywhere, has a form. Traces its label to 1e-14
on such arcs, negative angles and a turn from 30 degrees.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
`brep::form` builds each analytic kind's exact B-spline the way SMLib holds its own: a circle
or ellipse as four rational quadratic quarter arcs from its frame's x axis on [0, 4] (angle and
parameter related in closed form), a cylinder or cone as that circle times a line along the axis,
a sphere as the circle times a half circle of latitude, a torus as the circle times its tube's
circle, a line as the degree-1 B-spline on its own parameter. A circle and every face it bounds
then share one parameterisation. Each traces its label to 1e-14.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
The assembly kept a face's domain and pcurves, which are in its NURBS form's parameters, but
dropped the form and computed new pcurves and the domain on the analytic surface. The form now
travels with the face, and its pcurves and domain are computed on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shell's `forward` is about the surface the face's (u, v) are on, its NURBS form when it has
one, which may run against its cylinder, cone, sphere or torus. The kernel read it against the
analytic surface, so a fillet's bore whose form runs the other way was a shaft and an M10 thread
was refused in its 8.5 mm hole. `Face::form_turns` says when the form turns the normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No floor of ours on tolerances (1e-6 of the body's size, 30 times SMLib's 1e-5 default): the
record's tolerances go back into SMLib, which approximates to them, so the floor coarsened every
later operation. No recognition of NURBS edges as lines or circles: an edge is a circle where
SMLib holds an SmCircle (with its NURBS form), and a NURBS edge keeps SMLib's trims on its own
parameter. crashes/2992 and sweeps/1853 pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edge::curve_interval (and brep::curve_interval for assemble's edges) gives the interval on the
edge's curve itself: a form circle's angles of its ends, its frame turned by the SMLib conversion
so the angle grows along the NURBS. lip and the ruled surfaces read arcs by it; the hull, the
blend tangents, the patch pcurves, point paths, IGES output and the prism runs evaluate on
Edge::parameters. assemble carries an edge's form through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The SMLib conversion reads and writes EDGE_NURBS_FORM: a circle edge's record keeps the circle
as what it is and the NURBS SMLib holds it as as its parameter, so the trims on it carry over
exactly (TrimMap identity).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The edge mirror of a face's NURBS form: Edge::nurbs keeps the NURBS SMLib holds a conic as, and
the edge's interval and its pcurves' parameter are its. Edge::parameters is the curve every
evaluation at a parameter uses; curve says what the edge is. Nothing writes the form yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
prism.rs's sheet regions import Surface and Vec3 only where they are built (the smlib feature),
so the kernel without it has no unused imports; the cli's tests that measure meshes at their own
tolerance depend on solidcraft-kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
An edge whose two faces meet tangentially has no corner to round, and SMLib refuses a blend along
it. The chain now runs on sharp edges only, as a tangent chain does (fillets/3369: a rim edge that
ends on the tangent seam of a stadium).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A whole circle is one closed edge now, so the outer wall and the hole wall each have a seam; the
rig counts seam edges (4005, 4006), and 1c490ddd's count without them broke those cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
doc: world_state, world_state_reusing, state_in_frame_at, state_in_frame, face_point_state,
face_point_names and construction_state return Result. A body that could not be placed, a
frame that could not be inverted, a sketch plane or thread axis that did not survive the
placement, or a failed placing worker used to leave things where they were without a word;
now the call fails with what could not be placed. is_placement is the one test of an
occurrence's placement (finite, a rotation that does not mirror, a translation within
1e9 mm). Opening a design names every occurrence that fails it; add_occurrence refuses
one; a joint solution that would place an occurrence outside one is not applied and the
joints placing it report it.
engine: Session::world_state returns Result and keeps a failure in its cache as it keeps a
placed model. bounds, home_camera, open_sketch_plane, the scene builders, the world
previews, frames::to_local and auto_operation pass the error on; helpers answering "not
found" take the placed model from their caller. Commands setting a placement check it
(valid_position, exploded view, fastener at a point, STEP insert matrix).
ui: panels, picks and hovers read the session's placed model through
open_meshing::session_world; a model that cannot be placed shows no placed bodies, and the
viewport says why across its bottom. Pictures and the control channel report the error.
cli, mcp: snapshots, renders, benches and the oracle report the error; the kernel-case rig
records it as the case's failure. Tests read the new Results with unwrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Extent.corner is optional: unset, each profile preserves curvature where
every curve is a line or an arc and takes the tangent rule where another
curve has a corner, with a note in the feature's warning; a rule the user
gave is kept. draft_corners reports not_exact as the kernel builds (any
free curve in a cornered profile). Builds (release CLI); cases not yet run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel blends exactly the edges given; the feature's tangent_chain (default true, saved
only when false: pending format note blend-tangent-chain) expands each pick to its tangent
chain (kernel::tangent_chain) before the kernel call. A variable or spline round takes its
edge alone. Scripts and MCP passing one pick get the chain again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt