Commit Graph
15 Commits
Author SHA1 Message Date
semmelrindeandClaude Opus 5.5 31218b1451 Sketch drag: an end the cursor can't reach stays where it is (#8944) (#8967)
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:54:27 +00:00
ermanyop-stack a5f472c23e Prevent angular drags from collapsing construction geometry (#8148) (#8160)
* Reject newly collapsed angular reference lines (#8148)

Reject angular solutions that collapse a reference relative to its input length. Cover constrained drags and already-short references. Engine replay and full CI validation remain in progress.

* Cover live and non-live angular drags (#8148)

Adds a replay of #8148 for live and non-live drags. The integration test compiles locally, but the Windows GNU test executable exits with STATUS_ACCESS_VIOLATION before running tests, including with --list/--help. Kept in the draft PR pending validation on a working native runner.
2026-10-28 12:44:16 +00:00
HiroKenEzandClaude Opus 5.5 60efbe39e3 Sketch drag: a linkage with redundant parallelogram constraints still moves (#4585) (#4983)
* claim: #4585

* Sketch drag: a linkage held by redundant parallelograms still moves (#4585)

Cursor motion looks for the sketch's freedom in the null space of the
constraint Jacobian. Redundant constraints (a parallelogram held both
parallel and equal on each pair of sides) are dependent only at an exact
solution; after a correction to the solver's tolerance their rows differ
by about 1e-9, which the 1e-9 pivot tolerance counted as rank, so the
null space came out empty and a one-DoF linkage stayed locked. Use the
rank analysis' 1e-7, so the drag sees the freedom the sketch reports.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:43:49 +00:00
takuto-NAandbherbruck 843c0bf97a Reduce repeated sketch diagnostics and enable normal-CI profiling regressions (#2355) (#2359)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 13:55:25 +00:00
takuto-NA d8eb65d26e Make constrained sketch edges follow the cursor (#3360) (#3362)
* claim: #3360

* Fix constrained sketch edge following and final drag coordinates
2026-10-20 12:43:59 +00:00
bherbruckandClaude Opus 5.5 d0afc31632 Save the evaluated model with every design: exact, stored once, scaled caps (#3053) (#3093)
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: say why bodies were not kept

* Exact planes and revolutions; budgets for large bodies (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: the model cache and the exact native B-rep (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: time a save without the cache too

* Model cache entries are Deflate-compressed (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Model cache: one that does not fit the design file is left out, never a failed save (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 02:31:08 +00:00
28d67fb577 Regression tests: a cut short of a face keeps its skin, and the issue's pleats mirror and build at the far end (#1669) (#1730)
* Extrude: a profile edge short of a face is not grown through the skin beyond it (#1669)

A cut or join profile edge that lies on a face of the target is grown off it by 0.5 % of the body, so that the tool's wall does not lie in the face. Whether it lies on a face was judged half a growth step either side of it: empty just outside, material just inside. An edge 0.25 mm short of a 3.75 mm wall's far face reads the same, and the growth cut through the skin it should leave (55 050 mm³ instead of 56 130 on the test's wall). Now the space just past the edge, 1e-4 of the body out, must already be as the operation wants too.

In #1669, the pleat's window built directly at the far end of a case opened through the wall at 3.75 and 4 mm, while its mirror, built without the growth, rightly left the skin and then failed to join the loft through it. Built either way, the window now leaves the skin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Regression tests: the issue's pleats mirror and build at the far end (#1669)

The issue's battery case at 3.5 mm: the mirror of the window and the pleat builds (it needed #1670's meshing of twisted faces), and at 3 mm the same window and pleat built directly at the far end of the finished case join it (they needed #1667's end rounds).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Far-end pleat test: the direct build matches the mirror's volume

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Erikas <erkexzcx@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:13:26 -04:00
takuto-NA 3a9b053f5b Fix constrained point dragging within the shared frame budget (#1976) (#1977) 2026-10-19 07:24:04 -04:00
Yuto Nakamura e766fb14fb Preserve warm assembly caches across Save As renames (#2120)
Thanks @yutyan0119.
2026-10-18 12:11:56 -04:00
Mateusz Sych 74ce904142 Mesh export: the faces of an edge share its points exactly (#1753)
Thanks @SychPL.
2026-10-16 12:26:14 -04:00
H. Conrad dc6eca6830 Fix/shell saddle corners (#1316)
Thanks @Ian-cmd-ops.
2026-10-16 01:19:42 -04:00
H. Conrad 42d4ebeb16 STEP export: a merged partial cylinder keeps its cylinder (silent volume loss) (#1497)
Thanks @Ian-cmd-ops.
2026-10-16 00:27:48 -04:00
H. Conrad c5b7009ce3 ci: nightly property tests with more cases (#1498)
Thanks @Ian-cmd-ops.
2026-10-16 00:13:48 -04:00
H. Conrad 63accec16e STEP export: shelled revolved bodies export instead of panicking (#1496)
A scale across a revolution's axis keeps the face a surface of revolution and is written as one; any other refusal from the writer is an export error, not a panic.
2026-10-15 22:19:10 -04:00
H. Conrad 2141a3802a Shell: an open face next to a concave edge no longer cuts the wall past it (#1495)
The pushed-out cavity is trimmed so that past an open face's plane it only reaches through the open face itself.
2026-10-15 22:19:04 -04:00