Commit Graph
1180 Commits
Author SHA1 Message Date
Nathan Dane 3b8cbc4e22 Viewport: surface analysis status items and legend keys (#8547) (#8556) 2026-10-30 12:12:19 +00:00
Rick MorgansandClaude Opus 5.5 66bd64cc5e Engine: one contract check for a call, used by the preflight, the bridge and the app (#9339)
`schema::issues(id, params)` looks up the command's typed contract and
lists what is wrong with the parameters (none without a contract or for
an unknown id). The batch preflight, the MCP bridge's pre-send check and
the app's check of a design-switching command each did that lookup
themselves; they now call it. No behaviour change.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 10:21:06 +00:00
jeromehzl f9146cdd58 Hole: a Hole at sketch points hides its sketch as an Extrude does (#9082) (#9211)
sketch_consumed knew Extrude, Revolve and the sheet metal flanges but not
a Hole drilled at a sketch's points, so that sketch stayed drawn inside the
holes. A Multiple hole now counts as using its sketch; Edit Feature shows
its points while the dialog is open. Single holes keep their sketch shown,
since a hidden sketch offers no points to snap to.
2026-10-30 09:37:53 +00:00
jeromehzl 966b10e731 Sketch: a feature on a failed sketch names that sketch (#9075) (#9276)
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
2026-10-30 09:03:46 +00:00
Rick MorgansandClaude Opus 5.5 92af4a21c8 Control channel: a per-request param_check level, applied and confirmed by the app (#9184) (#9185)
* claim: #9184

* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)

`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.

`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".

The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Control channel: a design-switching command is checked at the request's level

Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:24:41 +00:00
semmelrindeandClaude Opus 5.5 7b24a1dc1e Sketch corners: a round that would use up an arc, or where the curves meet smoothly, is refused (#8813)
* Sketch corners: a round that would use up a whole arc is refused

A quarter arc of radius 5 running into a line along it, rounded with
radius 5, put the round's tangent point at the arc's other end and left
an arc of no length. round_corner now skips a round whose tangent point
falls on either curve's other end; with none left it says that radius
does not fit, as for two lines (found by a local trim fuzzer).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch corners: a round where the curves meet smoothly is refused

A line running on from an arc's end along its tangent (off only by rounding)
has no corner, but the round's tangent points landed within 1e-7 mm of it and
the round came out as an arc of no length (found by a local trim fuzzer). The
corner test's line met its arc this way too and was checking that output; it
now meets the arc at a corner.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:23:17 +00:00
austin62jakeandClaude Opus 5.5 82ac9a6b03 sketch.inspect: each profile loop names a curve once, not once per segment (#9179) (#9186)
* claim: #9179

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* sketch.inspect: each profile loop names a curve once, not once per segment (#9179)

A profile records one curve id per piece its loop walks, and a conic or
spline is walked as many short pieces, so sketch.inspect listed a single
Bezier curve 50 times in a profile's `curves` and as often in a hole loop.
The reply now names each curve of a loop once, in the order the loop walks
them (solidcraft_sketch::distinct_curves, as delete and profile references
already do). The solved profiles keep their per-piece lists.

The lists are now a profile pick as they stand: a whole_boundaries pick
refuses a curve named twice, and the regression test extrudes the wall
from the reply's lists.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 06:14:06 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
austin62jakeandClaude Opus 5.5 d9aa73b597 Measure: an exact circle's or arc's length agrees with its circumference (#9086) (#9227)
* claim: #9086 (edge lengths)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Measure: an exact circle's or arc's length agrees with its circumference (#9086)

Measure gave a circle's or an arc's length_mm as the length of the
polyline drawn for it, which runs inside the curve, while the same reply
gave its circumference or arc_length from the exact circle. When the edge
is known exactly (the kernel's circle, or a sketch's own circle or arc),
length_mm is now its radius times its angle. A circle fitted to a mesh
body's polyline keeps the polyline's length.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 05:27:00 +00:00
railconstrandrailconstr 81cbcef31c Sketch: add construction-line toolkit (#8239) (#8679)
Co-authored-by: railconstr <335242259+railconstr@users.noreply.github.com>
2026-10-30 05:02:54 +00:00
SilentWolf75andCursor d93b1cb282 Sketch Trim: prefer free curves over projected edges (#8979) (#9224)
* claim: #8979

Co-authored-by: Cursor <cursoragent@cursor.com>

* Sketch Trim: prefer free curves over projected edges (#8979).

When Trim/Extend/Break is active, linked face edges yield to nearby drawn curves, and the refuse message names Break Link.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-30 04:25:45 +00:00
semmelrindeandClaude Opus 5.5 f3ee34d372 English: American spelling throughout the base catalog, British only in English (UK), and "1 body" (#9085) (#9194)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 04:16:23 +00:00
bherbruckandClaude Opus 5.5 8f1b456275 Release 0.27.1 (#9181)
* Release 0.27.1

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render job test: wait for the cancelled job's reservation to be released

The worker drops a job's reservation just after the job turns terminal, so
checking admitted bytes right after wait_timeout raced (10 of 40 local runs
failed). Poll with a deadline, as dielectric_tests does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 23:34:23 -04:00
Colin Faulkingham d11d268597 Render: reject excessive pixel work during preflight (#5088) (#5728)
* claim: #5088

* fix: reject excessive render pixel work during preflight (#5088)
2026-10-30 01:35:12 +00:00
Rick MorgansandClaude Opus 5.5 4a781b8cd8 MCP: --param-check checks calls to the running app (#9072) (#9073)
* claim: #9072

* MCP: --param-check checks calls to the running app (#9072)

`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:33:42 +00:00
semmelrindeandClaude Opus 5.5 d4fb5538e6 Sketch: a side squeezed to a hair in two solves is refused too (#9049)
The check for a constraint that shrinks a curve to a point took under 1e-6
for a point. One solve could squeeze a 49 mm side to about 1.2e-6 mm and
the next take it the rest of the way, so neither solve tripped it (two
rectangles' corners made coincident, found by a local sketch fuzzer). Under
1e-5 now counts: in 4000 random sketches the constraints that still
collapsed a line went from 9 to 0, and every refusal rate stayed the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:52:36 +00:00
SilentWolf75andCursor 355b486595 Parameters: unit-less numbers follow the other side's unit (#9015) (#9027)
* claim: #9015

Co-authored-by: Cursor <cursoragent@cursor.com>

* Evaluate bare length offsets in the design's units (#9015)

Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-29 21:52:23 +00:00
Rick MorgansandClaude Opus 5.5 2356a63aea CLI: run takes --param-check (#6921) (#6924)
* claim: #6921

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run refuses unknown options and takes --param-check (#6921)

`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CLI: run's option check takes --param-check; warn on timed runs as steps complete

`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:40:30 +00:00
Steven WatersandClaude 57c0121cb3 Cut & paste features between components (#5798) (#5805)
* Add timeline.cut and refactor timeline.paste to allow cutting and pasting features

Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FyPtTd9nt3T9mHihfHkCcZ

* Updated test for new grounded behaviour

Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FyPtTd9nt3T9mHihfHkCcZ

* Resolved conflicts with #3390

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed failing test

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Resolved conflicts with #3512

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 21:39:53 +00:00
Colin Faulkingham 9c5a636987 Parameters: accept mixed-case text units (#8960) (#8985)
* claim: #8960

* fix: accept mixed-case text parameter units (#8960)
2026-10-29 21:11:16 +00:00
semmelrindeandClaude Opus 5.5 18dc05c83d Sketch Trim and Extend: a crossing at a curve's own end is that end, leaving no curve of no length (#9012)
* Sketch Trim: a cut at a curve's own end leaves no piece of no length

A curve that ends where another one ends crosses it there only within the
intersection's tolerance (1e-6), but bracket dropped cuts at the curve's
ends only within 1e-9 of its parameter range. A line ending on an arc's end,
trimmed from its other end, was cut a hair inside its own end and kept a
piece about 1e-7 mm long (found by a local trim fuzzer: 78 such trims in
4000 sketches, and 8 breaks). bracket now also drops a cut within that
tolerance of the curve's ends, as add_cut merges cuts that close together.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Extend: a touch at an arc's growing end is that end, not a stop

An arc whose end is where a line ends that touches the arc's circle there
found the touch a hair beyond the end (within the intersection's tolerance),
stopped on it, and added an arc from that point to itself. A hit within that
tolerance of the growing end (1e-6, as for the far end) is now the end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 20:48:18 +00:00
semmelrindeandClaude Opus 5.5 5cf18ba8c3 Sketch: a constraint that would shrink a curve to a point is refused (#8988)
A constraint whose only solution squeezes curves to a point (a rectangle's
corner made the midpoint of its opposite side, or two opposite corners made
coincident) collapsed the whole rectangle while the sketch said solved. A
solve that shrinks a line or circle from over 1e-3 to under 1e-6 now counts
as one that fails, as one that throws points far away does: a strict edit is
refused, another keeps the sketch from before its solve, and the free solve
after the held ones in apply_in_order refuses the constraint.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 20:21:51 +00:00
MATHEUS PINHEIRO RAPOSOandClaude Opus 5.5 70d39bb4f3 Three tests pass on Windows with an 8.3 TEMP path (#8968)
On a Windows account whose %TEMP% is a short (8.3) path, such as
C:\Users\MATHEU~1\AppData\Local\Temp, three tests failed because they built
their folders from std::env::temp_dir(), and the agent file scope refuses short
names ("not allowed for this agent: short (8.3) names such as `PROGRA~1`"):

- engine: cmd::render::settings_tests::embedded_hdr_capture_rejects_parameters_scope_and_cpu_primaries_without_mutation
- ui-egui: agent_chat::tests::file_actions_wait_for_the_user
- ui-egui: agent_chat::tests::permission_modes_decide_what_asks

They now use vfs::temp_dir(), which spells the folder with long names, as
libraries_tests and motion_tests already do (#1385, #1211).

Checked on Windows 11 x64 with the 8.3 TEMP: the agent_chat and
render::settings tests (113) pass, and clippy -D warnings is clean for both
crates.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 19:13:36 +00:00
184d4720be Sketch: a dimension can measure a model edge (#7912) (#8010)
* claim: #7912

* Sketch: dimension a sketch entity against a model edge

A dimension took sketch entities only, so measuring a sheet-metal body's edge
was refused with "cannot dimension that combination of entities". The
entities now take a model reference too, an {edge: [x,y,z], body?} or a
{vertex: [x,y,z], body?}, which is projected into the sketch first, as the
constraint commands' operands are since #6348, and measured there.

The Dimension tool picks a body's edge or vertex when the sketch has nothing
under the cursor, and reads the pick back into the reference the command
takes.

* style: rustfmt the sketch dimension command

* Cap the entities one call may project

A dimension projects the model references among its entities into the
sketch, one link and one resolve each, and the loop had no cap: a single
request could make the engine resolve thousands of model edges before
the dimension refused the list. The count is now refused before anything
is projected, and the projection loop stops at the same limit the
Project command uses.

* Sketch dimension on a model edge: use the sketch store after the store refactor

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:54:42 +00:00
semmelrindeandClaude Opus 5.5 31218b1451 Sketch drag: an end the cursor can't reach stays where it is (#8944) (#8967)
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:54:27 +00:00
cb34eef6aa Settings profiles: save, switch, export and import input and interface settings (#6237) (#6254)
* claim: #6237

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: save, switch, export and import input and interface settings (#6237)

A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).

- Preferences > General > Settings profiles: choose the active profile to
  apply it, Save, Rename, Delete, Export... and Import...; a note shows when
  the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
  the control channel, palette and scripts; the engine checks the parameters,
  the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
  unknown keys and unreadable values, caps sizes, never switches, and never
  panics. Each preference is applied through prefs::set, so a value this
  computer refuses keeps its current one and is reported.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)

New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences snapshot: compare the toolbar, favourites and profile too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: keep a command's several keys (#6237)

Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 18:42:36 +00:00
HiroKenEzandClaude Opus 5.5 c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
kaltenbrunnermarkusandMarkus Kaltenbrunner 5f11d92458 Opening a design pins its body names, so the first undo evaluates nothing (#8939)
Problem: a design saved before body names were pinned (#6403) is pinned by its first command
that changes it, as part of that command. Undoing that command went back to the unpinned design,
whose fingerprints no evaluated result matched any more, so the first undo after opening
evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened
from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open`
pinned at the end of the command instead, which kept undo fast but left the design with unsaved
changes on opening.

Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's
bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the
saved one: opening is no change.

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-29 18:15:47 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
semmelrindeandClaude Opus 5.5 8b1ee94296 Sketch: an edit whose solve throws points far away is not taken (#8931)
A held solve applying a constraint, or the edit's own solve, could find a far
solution of the constraints and move points millions of millimetres while
the sketch said solved. Such a result now counts as a failed one: the next
held solve is tried, or the edit is refused.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:24:02 +00:00
Nathan Dane 6255a10e80 Viewport status item: engine list of what is on (#8545) (#8554)
* claim: #8545

* Declare ordered viewport status items (#8545)

* Keep legacy surface analysis coexistence behind a preference (#8545)
2026-10-29 17:11:34 +00:00
6ebfe91661 History: say why an edited feature behind the marker changes nothing (#8100) (#8727)
* claim: #8100

* History: say why an edited feature behind the marker changes nothing (#8100)

Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).

- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
  carries the feature's `warning` (for a rolled-back feature, the one its
  constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
  the history marker and not built.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 17:11:10 +00:00
699d730151 Button head cap screws, ISO 7380-1, in the standard parts library (#8006) (#8017)
* claim: #8006

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Parts library: button head cap screws, ISO 7380-1 (#8006)

Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.

The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.

Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.

The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Parts: format after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: the Button head cap screw family name

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:43:36 +00:00
d6d6c7d9ee Copy and paste bodies and components between designs (#3511) (#3512)
* Components: copy and paste bodies and components between designs and components (#3390)

Squashed for the rebase onto main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* claim: #3511

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paste New: copy from a design other than the one pasted into

`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.

From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
  copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
  is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.

Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: paste bodies and components copied in another design

`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
  import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
  names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
  appearances, materials, joints and motion inside them; joints to the outside stay behind.

Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: copy in one design, paste in another

Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.

The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.

Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: what is selected wins over a design row picked earlier

Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Put the Paste from Another Design label in the pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: unground the placement before moving it (a design's first part is grounded)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop locale keys main already folded into en.json

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Paste from Another Design in the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:31:09 +00:00
FrankandCopilot 162b3cd4ed Sketch Intersect: add Faces/Bodies and Projection Link options (#1110) (#7989)
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)

Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Select Other: label curves from Intersect as intersected (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-29 16:09:18 +00:00
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
Colin Faulkingham 4e78acc7a2 Sketch: the same constraint twice is one constraint (#5224) (#8850)
* claim: #5224

* Sketch: the same constraint twice is one constraint (#5224)
2026-10-29 15:31:18 +00:00
Dahak BuildsandDahak Builds 35601da3f0 3D sketch: 3D Line, Spline and Point buttons start tools (#8040) (#8041)
* claim: #8040

* wip: 3D line/spline/point tools (#8040)

* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-29 15:10:41 +00:00
austin62jakeandClaude Opus 5.5 3e01081ff9 Control token: a closing window removes only its own token and discovery files (#8794) (#8837)
* claim: #8794

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Control token: a closing window removes only its own token and discovery files (#8794)

Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.

remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 15:01:45 +00:00
Colin Faulkingham 443e5cd59d Feature editor: allow visibility changes while editing (#8810) (#8827)
* claim: #8810

* fix(engine): preserve feature editors across visibility changes (#8810)
2026-10-29 14:26:24 +00:00
Charlie 5a0abb8710 feat(align): add Components mode to Align for occurrence placement (#7224)
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.

- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
  flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
  does) but the dialog warns, and the reply lists it under shared.
2026-10-29 14:19:05 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
RyanandClaude Opus 5.5 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
semmelrindeandClaude Opus 5.5 6a183cce02 Sketch corners: a corner cut is refused where two lines lie in line, as rounding is (#8802)
Chamfer at a corner of two lines lying on each other cut both back and
added a line of no length between their ends; lines in line with each
other have no corner either. chamfer now refuses a corner angle of 0 or
180 degrees with Fillet's message, "the lines are parallel" (found by a
local trim fuzzer).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:49:31 +00:00
semmelrindeandClaude Opus 5.5 cf86f18c11 Sketch: an end held on a removed curve where another curve ends stays tied (#8779)
A trimmed circle ended on a line exactly where an arc started on that
line, held there by a point-on-curve tie. Trimming the line away dropped
the tie and left the two ends on one spot, untied. remove_curves now ties
each point held on a removed curve at one of its ends to that end before
the curve goes (found by a local trim fuzzer, 15 -> 12 cases in 2000
seeds).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:07:28 +00:00
Nathan Dane 3cc10acafa Render lights: uniform light list, solo and mute, and the Light editor (#6281) (#7265)
* Render lights: uniform light list, solo and mute, and the Light editor

* Render lights: Lighting and Light editors to the approved design

* Render lights: the scale-test frame carries the product light list

* Restore the stable Render light mute target on the shared eye control

* fix: validate the viewport BRDF probe with current shader dependencies

* fix: compile legacy lighting controls only for tests

* fix: scope the legacy lighting preset import to tests

* fix: reuse the merged Add Light label and translations

* test: enable the implemented Add Light radial action

* fix: restrict the legacy CPU vector editor to tests

* test: reveal Output before checking Lights browser focus

* test: use the published Browser card rectangle for Output scrolling

* test: reveal Output children before exercising editor navigation
2026-10-29 08:40:51 +00:00
semmelrindeandClaude Opus 5.5 2d56f5d599 Construction: a vertex where another body's edge runs past stays its corner (#8650) (#8722)
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 08:03:31 +00:00
raykholo aee57875f5 Sketch Fillet: 3D sketch lines are not offered and say they can't be filleted yet (#4160) (#4177)
* claim: #4160

* Sketch Fillet: 3D sketch lines are not offered, and say they can't be filleted (#4160)

The Fillet tool offered 3D sketch lines as picks, and sketch.fillet then
refused them with "`a` must be a line". The tool no longer offers them, and
the command refuses them with "not supported yet: filleting 3D sketch lines".

* Sketch Fillet and Chamfer: refuse all spatial sketch curves (#4160)

* Sketch corner test: give the picked curve its point (#4160)

main added a point to sketch-curve hits after this branch was written.
2026-10-29 07:22:53 +00:00
Nathan Dane d2fcab8432 Render shot editor: camera and frame controls, aspect presets, guides and frame overlay (#6281) (#7232)
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay

* Render shot: Shot editor and Scene overview to the approved design

* Distinguish Render stage variants from native window frames

* fix: restore library inspection after clearing shot selection

* test: follow the merged Output Check navigation

* test: inspect Check without requiring a preflight result

* test: cancel Shot removal through its shared dialog action

* fix: remove obsolete Inspector stage form after editor integration

* fix: preserve Appearance Advanced when clearing Wear focus

* test: expect the dedicated Check editor from Scene overview
2026-10-29 07:03:24 +00:00
raykholo afe7dcd4e1 Allow sketch Mirror to use origin axes (#4193) (#4207)
* claim: #4193

* Sketch Mirror: an origin axis can be the mirror line (#4193)

Mirror accepted only a straight curve of the sketch. It now also takes an
origin axis that lies in the sketch plane ({axis: X|Y|Z}), projected into
the sketch as a fixed linked line, so the copies stay symmetric to it and
follow the source when it moves.

* Sketch Mirror: use current sketch store (#4193)
2026-10-29 05:08:00 +00:00