Commit Graph
2504 Commits
Author SHA1 Message Date
PaddleStrokeandClaude Opus 5.5 0b2d51d301 Sketch: a projected face follows a resize that moves its corners far (#9001) (#9453)
* claim: #9001

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a projected face follows a resize that moves its corners far (#9001)

A sketch on the face of an angle kept its projected face boundary (and
reported "projected face boundary identity is ambiguous") when the wall
thickness changed: the inner corner moved by more than a tenth of the face,
past the nearest-point match, and the same-order fallback refused faces.

Accept the same-order layout when, for every point, the point read in that
order is also clearly the nearest one on the same loop with lines the same
way. Rims and holes, and rotated readings of a rectangle, stay refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 15:05:36 +00:00
FrankandClaude Opus 5.5 bf7979d4a7 Insert Part: seat a fastener in several holes at once (#9341) (#9342)
* claim: #9341

* Insert Part: seat a fastener in several holes at once (#9341)

parts.insert / parts.fastener take `at` as one pick or a list of picks.
The part is built once as one component; each hole gets its own
placement and rigid seat joint. All placements are made before any is
seated, since joint.create takes the part's seating point where the
placement is. The insert now runs on a scratch session like
parts.resize, so it is one undo step, and a pick off every body fails
it before anything is made.

The Insert Part dialog's hole input is multi-select ("Holes
(optional)") and OK passes every pick.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert Part: picks on one hole's rim seat one part (#9341)

A hole's rim is drawn as two half-circle edges, and one click on it
picks both, so four clicks gave eight picks and two screws per hole.
Picks whose wall point lies level on the same hole axis, on the same
body placement, are one hole.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:37:02 +00:00
DuBearteandClaude Opus 5.5 5439bfc0b5 Expressions: a decimal comma inside plain parentheses (#9408) (#9447)
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:34:56 +00:00
austin62jakeandClaude Opus 5.5 c2ea096abb Assistant on Windows: find Node in its install folder when the launcher's PATH lacks it (#9297) (#9458)
* claim: #9297

* Assistant on Windows: find Node in its install folder when the launcher's PATH lacks it (#9297)

An npm-installed agent starts on Windows through its .cmd shim, which runs `node`, with the PATH
search_dirs makes: SolidCraft's own PATH, then npm's and other installers' folders. Node's own
install folder was not among them, so started from a launcher that leaves it off the PATH (the
ArtCraft launcher), the agent stopped with "'node' is not recognized". The search now also takes
%ProgramFiles%\nodejs, %ProgramFiles(x86)%\nodejs and nvm-windows' %NVM_SYMLINK%, after
everything it took before. search_dirs reads its variables through search_dirs_in, so a test can
give it a launcher's environment.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 14:27:10 +00:00
Colin Faulkingham 085853315d Sketch: copy completed sketches between designs (#5427) (#8962)
* claim: #5427

* Sketch: paste completed sketches across design tabs
2026-10-30 14:09:37 +00:00
Mario GeigerandClaude Opus 5.5 332f96c26a Point clouds: colour and filter by any property the file carries (#8816) (#8819)
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)

A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.

In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.

pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)

A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:02:29 +00:00
56e752c182 Toasts: a close (×) with a countdown ring instead of a Close button; a shorter 3D mouse driver label (#7971) (#8763)
* claim: #7971

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: a close (×) with a countdown ring instead of a Close button (#7971)

Every toast the user may close (the status, the 3D mouse offer and the
stand-up note) has a close (×) at its top right, handle toast:<name>:close,
in place of a Close button; it does what the button did, is a kit-drawn
button with an accessible name and hover text, reachable by Tab, and dead
behind an issue report. Toasts that go by themselves draw a thin ring
around it that shrinks over their time; pointing at the offer or the note
starts their time again, as before, so their ring is full while pointed at.

The 3D mouse offer keeps three buttons, Calibrate…, Use Direct Driver (the
detail in its tooltip) and Never show again, on one row: the corner
toasts are 400 points wide, as the row's estimated widths need 356.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: lay buttons out at their drawn widths; corner toasts 360 wide (#7971)

The toast's button rows used an estimate of each button's width that ran
about 40 points over the kit button as drawn, which wrapped the 3D mouse
offer's three buttons and left the main action short of the right edge.
Each button's drawn width is now remembered and the rows laid out with it
(the estimate stands in for the one frame before a button was first
drawn), so the main action is flush right; the corner width is the
smallest round one that fits the offer's three buttons in a row: 360.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Toasts: keep the analysis status test whole after rebasing onto main

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-30 13:48:29 +00:00
SvenCarstensen aff8106205 Help: check for updates and show results in the selected language (#8896)
* Help: add manual update checks and status window

* Test manual update checks and localized results

* Add update check to the native Help menu

* Localize Help update checks in all app languages

* Document manual update checks from Help

* Document ui.help updates control action
2026-10-30 13:41:00 +00:00
SilentWolf75andCursor 21340ba019 Web: Chinese UI loads a Chinese font (#8894) (#8981)
* claim: #8894

Co-authored-by: Cursor <cursoragent@cursor.com>

* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)

BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-30 13:33:23 +00:00
Colin Faulkingham 8b25fa0ae4 Configurations: reject invalid parameter expressions when saving rows (#9088) (#9414)
* claim: #9088

* Configurations: reject invalid row expressions (#9088)
2026-10-30 13:32:50 +00:00
c0b0369aa2 Sketch: hide constraint glyphs when zoomed out (#8980) (#9023)
* claim: #8980

Hide constraint glyphs when zoomed out (claim).

Co-authored-by: ReDead <ReDead@users.noreply.github.com>

* Sketch: hide constraint glyphs when zoomed out (#8980)

Fixed-size constraint glyphs stayed visible at every zoom and cluttered the
view when far out. Hide them below a sketch-plane scale threshold, with the
old always-on behaviour behind hide_constraint_glyphs_zoomed_out.

Co-authored-by: ReDead <ReDead@users.noreply.github.com>

* i18n: complete-catalog strings for zoom-hide preference (#8980)

Add ar/he/vi translations for prefs.hide_constraint_glyphs_zoomed_out
(and its note) so cargo xtask i18n --check no longer reports 6 gaps in
complete catalogs.

Co-authored-by: ReDead <ReDead@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
2026-10-30 13:31:09 +00:00
FrankandClaude Opus 5.5 44a9f9ee42 GPU path tracer: the path shader compiles on NVIDIA's Vulkan driver (#6705) (#6850)
Native compilers inline every call, and `main` inlined 33 BVH walks: three
sample_path calls, and a shadow walk per light source family. NVIDIA's
compiler (driver 610.88) crashed in nvgpucomp64.dll or ran out of memory.

- main settles the adaptive budget first, then samples at one call site.
- direct_light takes over direct_studio, visible and the fixed-light loop:
  one loop over the sources with one shadow-ray call site, drawing random
  numbers in the same order.
- next_vertex (a select) replaces (a+1u)%3u: after a BVH walk that index
  crashed NVIDIA's compiler within seconds.

main now inlines 5 BVH walks; main_inlines_few_bvh_walks counts them with
naga, so the limit holds without an NVIDIA GPU.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:28:57 +00:00
kaltenbrunnermarkusandMarkus Kaltenbrunner f331a0740b Model cache: write each set of sketch keys once, and build the states on threads (#9010)
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.

Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.

SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-30 13:28:16 +00:00
fkirillandKirill Frolov 12636b67be Select hidden geometry with Select Other and fit the list to the window (#5574) (#5577)
* claim: #5574

* Pick hidden geometry near long clicks in a five-row list (#5574)

* fix: make Select Other configurable and fit its list to the window

---------

Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
2026-10-30 13:25:56 +00:00
semmelrindeandClaude Opus 5.5 9f5ac92faa Saved model cache: keep fast opening after an update (#7168) (#7354)
* claim: #7168

* Saved model cache: keep fast opening after an update (#7168)

The model cache was read only by the exact build that wrote it (same app
version and commit), so every update evaluated every design again on its
first open. It is now keyed by the evaluation source instead: a digest of
the committed source the model is computed from (doc and the workspace
crates it is built from, the patched truck crates, locked external
dependencies, workspace build settings without the version, and the
cache reader), with the platform. An update that changed none of that
opens designs from their cache; one that changed any of it evaluates
them again, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:42 +00:00
PaddleStrokeandClaude Opus 5.5 6e39efd4ac Theme: System follows the desktop's dark/light setting on Linux GNOME (#7944) (#8123)
* claim: #7944

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Theme: System follows the desktop's dark/light setting on Linux (#7944)

On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:23 +00:00
C.VengelsandClaude Opus 5.5 3c40edd12a Print face: Send to Slicer lays a body on its marked face (#8429) (#8433)
* claim: #8429

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Send to Slicer lays a body on its marked face (#8429)

A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)

Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: a light tint in the viewport and its strength in Preferences (#8429)

Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:18 +00:00
SixSolid 9af2ae9a0f Agent chat window: an off-screen chat window no longer stalls the main window (#9118) (#9119)
* claim: #9118

* Agent chat window: an off-screen chat window no longer stalls the main window (#9118)

The chat popped out into its own window is an immediate viewport: eframe draws
and presents it inside the main window's frame. Both surfaces waited for vsync,
and a Wayland compositor sends no frame callbacks to a window it isn't showing,
so the main window stalled behind the chat window's present.

A surface other than the main window's is now configured with Mailbox, else
Immediate, when the configured mode waits for vsync and the surface offers one
(viewport_present_mode in the vendored egui-wgpu). The main window keeps vsync
and still paces both.
2026-10-30 13:24:30 +00:00
Kai Evans 1754318df7 Browser: the visibility eye at the right end of each row (#8718) (#8720)
* claim: #8718

* Browser: the eye sits in a column at each row's right end (#8718)

Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.

* Docs: the browser's eye column and browser_eye_left (#8718)

* Browser: the eye's tip shows by the eye at the row's end (#8718)

* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)

The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.

* Tests: browser depth checks run on the default layout, by indent handles (#8718)
2026-10-30 13:24:22 +00:00
FrankandClaude Opus 5.5 4bc5bdc791 Reverse zoom direction no longer flips 3D mouse zoom (#8993) (#8994)
* claim: #8993

* Reverse zoom direction no longer flips 3D mouse zoom (#8993)

The checkbox sits under Wheel and trackpad and now reverses the wheel
(and the navigation bridge's wheel-style steps) only. The 3D mouse cap
zooms by its own per-axis invert switch alone: device_camera no longer
takes a reverse_zoom argument, nor does the test model in Preferences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:23:12 +00:00
Dane DoubellandDane Doubell 6c764dce06 Sketch: pick a whole profile or chain for Mirror/Move/Copy/Scale entities (#8390) (#8812)
* claim: #8390

* Sketch modify: pick a whole profile or chain for the shared Entities input (#8390)

- Click inside a closed profile selects its whole boundary (and its holes);
  double-click a curve selects its whole chain, for Mirror, Move/Copy, Scale
  and the patterns. Single curves and points keep working as before.
- The mirror line may itself be among the entities: the command leaves the
  line in place and mirrors the rest, instead of rejecting it.

* Mirror: the shared line case is valid, not an error (#8390)

Update the half-filled-window test: a mirror line that is also among the
entities is now accepted (the command leaves it in place and mirrors the
rest), matching the engine.

---------

Co-authored-by: Dane Doubell <2853036+danedoubell@users.noreply.github.com>
2026-10-30 13:13:53 +00:00
SilentWolf75andCursor 655e771455 Update: Cancel stops the download sooner (#8908) (#8946)
* claim: #8908

Co-authored-by: Cursor <cursoragent@cursor.com>

* Update Cancel clears the UI and stops before checksum downloads.

Drop the install job as soon as Cancel is pressed so Downloading ends
immediately, and check the cancel flag around feed refresh and
checksum GETs so a stall before the package body no longer ignores it.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-30 13:13:44 +00:00
bherbruckandClaude Opus 5.5 15f74b7981 Agent chat composer: one margin, input box fills its area; hint stays on one line (#7268)
* Assistant composer: the input box fills its area, and the hint stays on one line

The composer footer inset the box by its own margin on top of the box's text
padding. The footer now has no margin, so the box spans it on all four sides and
only the text padding remains. The hint is painted on a single row, cut with an
ellipsis when the panel is narrow.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assistant composer: the hint takes its colour from the theme, not a literal

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 12:47:04 +00:00
Nathan Dane 3b8cbc4e22 Viewport: surface analysis status items and legend keys (#8547) (#8556) 2026-10-30 12:12:19 +00:00
FrankandClaude Opus 5.5 f59f6698f1 Ribbon drop-downs as a grid of large icons, as an option (#4739) (#5012)
* Ribbon drop-downs as a grid of large icons, as an option (#4739)

Preferences > Interface gets two settings, both off by default:

- Menus: List | Large icons. With Large icons a panel's drop-down shows its
  commands as rows of up to five icons at 32 px (twice the list's), keeping
  the list's group headings and order. The name, shortcut and help are in
  the tooltip, as on a ribbon button. Arrow keys move across and between
  rows; a click starts the command; right-click and drag pin it as before.
  Resting on an icon for two seconds arms a pin in its corner; a quicker
  click anywhere starts the command, so nothing is pinned by accident. A
  pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
  grid) leaves out the commands the ribbon shows as buttons; a panel too
  narrow for its buttons lists them again, and a menu is never left empty.

No icon artwork or colours change. Sketch > Create keeps its family list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch > Create in the large-icon grid: every variant under its family (#4739)

With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: groups side by side, no footer (#4739)

A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: a separator line between groups side by side (#4739)

As between the ribbon's sections: a 1 px line in the theme's border colour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: at most three rows, growing to the right (#4739)

A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: group headings centred over their icons (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)

Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)

With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:59:08 +00:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 1e5eb1e3b8 Sketch: find profiles island by island, so dragging in a large imported logo stays smooth (#6896) (#9313)
* claim: #6896

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

* Sketch: find profiles island by island and say when the search is cut short (#6896)

Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.

Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.

The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:52 +00:00
semmelrindeandClaude Opus 5.5 491687d4c1 Sketch: the cursor snaps On a spline, ellipse or conic while drawing, as on a line or circle (#9321) (#9343)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:10:25 +00:00
Rick MorgansandClaude Opus 5.5 66bd64cc5e Engine: one contract check for a call, used by the preflight, the bridge and the app (#9339)
`schema::issues(id, params)` looks up the command's typed contract and
lists what is wrong with the parameters (none without a contract or for
an unknown id). The batch preflight, the MCP bridge's pre-send check and
the app's check of a design-switching command each did that lookup
themselves; they now call it. No behaviour change.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 10:21:06 +00:00
jeromehzl f9146cdd58 Hole: a Hole at sketch points hides its sketch as an Extrude does (#9082) (#9211)
sketch_consumed knew Extrude, Revolve and the sheet metal flanges but not
a Hole drilled at a sketch's points, so that sketch stayed drawn inside the
holes. A Multiple hole now counts as using its sketch; Edit Feature shows
its points while the dialog is open. Single holes keep their sketch shown,
since a hidden sketch offers no points to snap to.
2026-10-30 09:37:53 +00:00
phanoobandClaude Opus 5.5 3ac7a196c9 Recover unsaved design?: Discard all, with a confirmation (#9299) (#9300)
* claim: #9299

* Recover unsaved design?: Discard all, with a confirmation (#9299)

A Discard all button at the left of the window's footer, away from Later.
It asks first ("Discard 7 autosaves? This cannot be undone.", Discard all /
Cancel), then discards every listed autosave the way its own Discard button
does (doc.recovery_discard on each id). Cancel goes back to the list
unchanged. The button publishes the handle recovery:discard_all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 09:26:04 +00:00
Logan NightandClaude Code 202e713cf1 Preferences: search finds settings in rows without a label (#9265) (#9318)
* claim: #9265

Co-Authored-By: Claude Code <noreply@anthropic.com>

* Preferences: a setting in a row with no label is found by the words it shows (#9265)

A search hid a row by its label before its controls were drawn. Seven checkbox rows and two segmented rows on the Interface page have no label, so "status bar", "search results" and "reveal on hover" found nothing. A hidden row with no label now keeps the words of its controls, as a dropdown keeps its value, and is drawn when they match. Each such row has a key of its own, so its neighbours are not drawn with it.

Co-Authored-By: Claude Code <noreply@anthropic.com>

---------

Co-authored-by: Claude Code <noreply@anthropic.com>
2026-10-30 09:25:24 +00:00
N3MI-DGandClaude Opus 5.5 63923da2ca Viewport: an opened design is framed at the home view, in the middle of the view (#9195) (#9204)
* claim: #9195

* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)

A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.

Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)

The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.

`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.

A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)

With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-30 09:14:18 +00:00
jeromehzl 7e22aed739 View ribbon: Visual style and Navigation tool offer their choices instead of an error (#8868) (#9127)
Both commands need a choice, but start_with_variant_memory only special-
cased the parameterless display toggles, so a click on the ribbon (or
command search, a shortcut, ui.start) ran them with {} and showed only
the engine's "style must be ..." / "tool must be ..." error.

They now open a short menu, the way Units does: under the ribbon row
that started it (a second click closes it), or in the middle of the view.
Visual style lists the four styles with the current one checked; the
Navigation tool lists Orbit, Pan and Zoom, and picking the latched one
releases it, as its navigation-bar button does. The four styles come
from one list shared with the navigation bar's menu.
2026-10-30 09:04:39 +00:00
jeromehzl 966b10e731 Sketch: a feature on a failed sketch names that sketch (#9075) (#9276)
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
2026-10-30 09:03:46 +00:00
jeromehzl 47292bb2bd Preferences: the window covers the ribbon behind it (#9078) (#9243)
A page window (Preferences) filled its frame with
dialog_body.gamma_multiply(0.97), which also scales the alpha, so the
ribbon's labels showed through its title bar, search field and heading.
It now uses the opaque dialog_body, as every other window does; the
navigation bar keeps its own translucent resting fill.
2026-10-30 09:01:33 +00:00
semmelrindeandClaude Opus 5.5 37dc878f31 Shell: test the interface scale raised in a narrow window, the crash #9271 fixed (#9315)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:58:15 +00:00
P'tite TêteandP'tite Tête f73f4da665 fix: Find a folded folder's mark in one pass over a long history (#9294)
- worst_status searched the history and the results for each feature of a folded folder, the square of the history's length every frame
- A folder of 16 features or more now finds places and results in tables built once, first of an id winning as feature_index and Model::result do
- Frame on a 4,880-body design: 20.4 ms -> 7.9 ms (M4 Max, release, headless)
- Test a_folders_mark_is_the_worst_of_its_features_own

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-10-30 08:16:36 +00:00
Rick MorgansandClaude Opus 5.5 92af4a21c8 Control channel: a per-request param_check level, applied and confirmed by the app (#9184) (#9185)
* claim: #9184

* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)

`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.

`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".

The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Control channel: a design-switching command is checked at the request's level

Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:24:41 +00:00
semmelrindeandClaude Opus 5.5 8251be9c06 Shell: content kept outside a changed viewport no longer turns inside out and crashes the Render frame overlay (#9271)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:01:16 +00:00
Steve Jason 3d744cc8a2 A formula that is a bare number gets the design unit (#9261) 2026-10-30 06:42:04 +00:00
semmelrindeandClaude Opus 5.5 7b24a1dc1e Sketch corners: a round that would use up an arc, or where the curves meet smoothly, is refused (#8813)
* Sketch corners: a round that would use up a whole arc is refused

A quarter arc of radius 5 running into a line along it, rounded with
radius 5, put the round's tangent point at the arc's other end and left
an arc of no length. round_corner now skips a round whose tangent point
falls on either curve's other end; with none left it says that radius
does not fit, as for two lines (found by a local trim fuzzer).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch corners: a round where the curves meet smoothly is refused

A line running on from an arc's end along its tangent (off only by rounding)
has no corner, but the round's tangent points landed within 1e-7 mm of it and
the round came out as an arc of no length (found by a local trim fuzzer). The
corner test's line met its arc this way too and was checking that output; it
now meets the arc at a corner.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:23:17 +00:00
Nathan Dane d95f40ac88 Ribbon: pressed state for commands that stay on (#8546) (#8555)
* claim: #8546

* Ribbon: pressed state for commands that stay on (#8546)
2026-10-30 06:20:31 +00:00
austin62jakeandClaude Opus 5.5 82ac9a6b03 sketch.inspect: each profile loop names a curve once, not once per segment (#9179) (#9186)
* claim: #9179

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* sketch.inspect: each profile loop names a curve once, not once per segment (#9179)

A profile records one curve id per piece its loop walks, and a conic or
spline is walked as many short pieces, so sketch.inspect listed a single
Bezier curve 50 times in a profile's `curves` and as often in a hole loop.
The reply now names each curve of a loop once, in the order the loop walks
them (solidcraft_sketch::distinct_curves, as delete and profile references
already do). The solved profiles keep their per-piece lists.

The lists are now a profile pick as they stand: a whole_boundaries pick
refuses a curve named twice, and the regression test extrudes the wall
from the reply's lists.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 06:14:06 +00:00
Homero Thompson 6ab46b6488 fix(#7058): the selection tools reach the geometry an SVG import leaves in the document (#7368)
An SVG import leaves a sketch with regions and no body. The marquee (box select) took only the bodies, so the imported geometry was unreachable with the selection tools: a marquee over it selected nothing, and a click on a region did not take it either.

The marquee now takes the regions of the shown sketches when the design has no body. A design that already has a body keeps the old exclusive behaviour: the marquee takes the bodies alone, not the regions of the sketches that are shown. A dialog that asks for edges or faces (the Patch dialog) never takes the regions: they are neither.
2026-10-30 06:03:16 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
AsTechEvolvesandClaude Opus 5.5 94b399e98f Preference: keep the view when a sketch opens; Look At faces it on request (#9188) (#9190)
* claim: #9188

* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)

Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.

Changes a default: no

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 05:32:56 +00:00
Homero Thompson 5aa41703f7 Control channel: ui.home refuses a sample index that names no sample (#9087) (#9212)
* claim: #9087

* fix(#9087): ui.home refuses a sample index that names no sample

The control channel passed the sample index straight to open_sample, which drops an index that names no sample and says nothing. The request then replied ok, so an agent could not tell a typo from a sample that had opened.

The index is checked before it reaches open_sample: an index that names no sample is refused with the valid range in the error. A sample that exists still opens, as before.
2026-10-30 05:27:06 +00:00
austin62jakeandClaude Opus 5.5 d9aa73b597 Measure: an exact circle's or arc's length agrees with its circumference (#9086) (#9227)
* claim: #9086 (edge lengths)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Measure: an exact circle's or arc's length agrees with its circumference (#9086)

Measure gave a circle's or an arc's length_mm as the length of the
polyline drawn for it, which runs inside the curve, while the same reply
gave its circumference or arc_length from the exact circle. When the edge
is known exactly (the kernel's circle, or a sketch's own circle or arc),
length_mm is now its radius times its angle. A circle fitted to a mesh
body's polyline keeps the polyline's length.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-30 05:27:00 +00:00
railconstrandrailconstr 81cbcef31c Sketch: add construction-line toolkit (#8239) (#8679)
Co-authored-by: railconstr <335242259+railconstr@users.noreply.github.com>
2026-10-30 05:02:54 +00:00