* claim: #9341
* Insert Part: seat a fastener in several holes at once (#9341)
parts.insert / parts.fastener take `at` as one pick or a list of picks.
The part is built once as one component; each hole gets its own
placement and rigid seat joint. All placements are made before any is
seated, since joint.create takes the part's seating point where the
placement is. The insert now runs on a scratch session like
parts.resize, so it is one undo step, and a pick off every body fails
it before anything is made.
The Insert Part dialog's hole input is multi-select ("Holes
(optional)") and OK passes every pick.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: picks on one hole's rim seat one part (#9341)
A hole's rim is drawn as two half-circle edges, and one click on it
picks both, so four clicks gave eight picks and two screws per hole.
Picks whose wall point lies level on the same hole axis, on the same
body placement, are one hole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)
A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.
In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.
pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)
A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7971
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: a close (×) with a countdown ring instead of a Close button (#7971)
Every toast the user may close (the status, the 3D mouse offer and the
stand-up note) has a close (×) at its top right, handle toast:<name>:close,
in place of a Close button; it does what the button did, is a kit-drawn
button with an accessible name and hover text, reachable by Tab, and dead
behind an issue report. Toasts that go by themselves draw a thin ring
around it that shrinks over their time; pointing at the offer or the note
starts their time again, as before, so their ring is full while pointed at.
The 3D mouse offer keeps three buttons, Calibrate…, Use Direct Driver (the
detail in its tooltip) and Never show again, on one row: the corner
toasts are 400 points wide, as the row's estimated widths need 356.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: lay buttons out at their drawn widths; corner toasts 360 wide (#7971)
The toast's button rows used an estimate of each button's width that ran
about 40 points over the kit button as drawn, which wrapped the 3D mouse
offer's three buttons and left the main action short of the right edge.
Each button's drawn width is now remembered and the rows laid out with it
(the estimate stands in for the one frame before a button was first
drawn), so the main action is flush right; the corner width is the
smallest round one that fits the offer's three buttons in a row: 360.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: keep the analysis status test whole after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Help: add manual update checks and status window
* Test manual update checks and localized results
* Add update check to the native Help menu
* Localize Help update checks in all app languages
* Document manual update checks from Help
* Document ui.help updates control action
* claim: #8894
Co-authored-by: Cursor <cursoragent@cursor.com>
* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)
BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #8980
Hide constraint glyphs when zoomed out (claim).
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch: hide constraint glyphs when zoomed out (#8980)
Fixed-size constraint glyphs stayed visible at every zoom and cluttered the
view when far out. Hide them below a sketch-plane scale threshold, with the
old always-on behaviour behind hide_constraint_glyphs_zoomed_out.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* i18n: complete-catalog strings for zoom-hide preference (#8980)
Add ar/he/vi translations for prefs.hide_constraint_glyphs_zoomed_out
(and its note) so cargo xtask i18n --check no longer reports 6 gaps in
complete catalogs.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* claim: #5574
* Pick hidden geometry near long clicks in a five-row list (#5574)
* fix: make Select Other configurable and fit its list to the window
---------
Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
* claim: #8429
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Send to Slicer lays a body on its marked face (#8429)
A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)
Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: a light tint in the viewport and its strength in Preferences (#8429)
Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8718
* Browser: the eye sits in a column at each row's right end (#8718)
Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.
* Docs: the browser's eye column and browser_eye_left (#8718)
* Browser: the eye's tip shows by the eye at the row's end (#8718)
* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)
The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.
* Tests: browser depth checks run on the default layout, by indent handles (#8718)
* Ribbon drop-downs as a grid of large icons, as an option (#4739)
Preferences > Interface gets two settings, both off by default:
- Menus: List | Large icons. With Large icons a panel's drop-down shows its
commands as rows of up to five icons at 32 px (twice the list's), keeping
the list's group headings and order. The name, shortcut and help are in
the tooltip, as on a ribbon button. Arrow keys move across and between
rows; a click starts the command; right-click and drag pin it as before.
Resting on an icon for two seconds arms a pin in its corner; a quicker
click anywhere starts the command, so nothing is pinned by accident. A
pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
grid) leaves out the commands the ribbon shows as buttons; a panel too
narrow for its buttons lists them again, and a menu is never left empty.
No icon artwork or colours change. Sketch > Create keeps its family list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch > Create in the large-icon grid: every variant under its family (#4739)
With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: groups side by side, no footer (#4739)
A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: a separator line between groups side by side (#4739)
As between the ribbon's sections: a 1 px line in the theme's border colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: at most three rows, growing to the right (#4739)
A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: group headings centred over their icons (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)
Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)
With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9299
* Recover unsaved design?: Discard all, with a confirmation (#9299)
A Discard all button at the left of the window's footer, away from Later.
It asks first ("Discard 7 autosaves? This cannot be undone.", Discard all /
Cancel), then discards every listed autosave the way its own Discard button
does (doc.recovery_discard on each id). Cancel goes back to the list
unchanged. The button publishes the handle recovery:discard_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n(uk): add pending translations for missing strings
* i18n(uk): add pending translations for new strings from upstream
* i18n(uk): improve pending translations
* i18n(uk): professional translation of all pending strings
* i18n(uk): finish the pending translations for 29 October
Every value in uk-sync-29oct.json is now Ukrainian except the seven symbols
and formulas that must stay unchanged: the modifier keys, HDR and the three
inertia tensors.
Terminology follows uk.json: spot light is "прожектор", directional light is
"спрямоване", body is "тіло", render is "рендеринг". Camera orientation keeps
тангаж, рискання and крен.
Removes history-origin-bodies.json, which was empty after its content moved
into this file.
* claim: #9188
* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)
Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.
Changes a default: no
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9108
Co-authored-by: Cursor <cursoragent@cursor.com>
* Canvas calibrate: pick Point A and B with viewport clicks (#9108).
The Calibrate card only had typed coordinates, so users could not mark the image. Clicks on the canvas now fill A then B, with on-image markers and a short hint.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Calibrate canvas: ja/zh/ar/he/vi strings for the click hints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>