Commit Graph
1854 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 08eff4f9dd Sketch on a face: project from the model's own body, not a copy that meshes it again (#3981)
A sketch attached to a face is evaluated in the face's frame. When that frame is the body's
own, the body was still rebuilt as a new ModelBody with empty mesh cells, so projecting the
face's edges display-meshed a throwaway copy and the next cut or join meshed the same body a
second time. On a body whose cut edges are slow to mesh this added about a second to each
feature after a sketch on a face. In place, the anchored body is now the model's own clone and
shares its mesh.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:02:22 -04:00
raykholo 9b80163421 Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872) (#3852)
* claim: #3223

* Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872)

Opening a STEP assembly leaves its root component active, and the root
owns no body: its parts are components inside it. A profile sketched on
such a part's face was therefore treated as outside the active scope.
Join made a separate body instead of joining the part, and the automatic
operation saw no material and offered New Body in either direction; an
automatic extrude that came out as a cut found nothing to cut.

A component with no body of its own now works on the bodies of the
components inside it whose geometry lies in its own frame (as an import
places them): Join targets the body whose face the sketch is on, the
automatic operation looks at those bodies, and an extrude whose own
operation is Cut or Intersect takes part in every body as an explicit
cut already did.
2026-10-21 00:54:16 +00:00
164554edba 3MF import: production extension review follow-ups (#2089) (#3628)
* claim: #2089 (3MF production extension: review follow-ups)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: production extension review follow-ups (#2089)

Follow-ups from the review of #2127:
- Only the root model's build is read; other parts' build sections are
  ignored as the spec asks (a slicer's child build pointing at a thumbnail
  no longer matters).
- A model part that can't be read fails only the placements that need it;
  the package-wide caps (part names, 1 GB of model XML) still refuse the
  package. The root XML is dropped once parsed and each part is read
  against the remaining budget.
- Loops are reported apart from depth, keyed by (part, object).
- Messages name parts as written; objects are kept in id order so parts are
  read in the same order every run; %XX escapes in part names are decoded;
  the model unit is a local of the parser.
- Tests: a component without p:path stays in its part (T1), the same id in
  two parts is no loop (T2), a slicer-shaped project (T3), the placement
  budget across parts (T4), a loop through three parts and a chain past the
  depth cap (T5), broken parts and child builds (T6), escaped names; the
  hostile-parts test asserts its messages; the mutation test also mutates
  the parts' XML and zips it again.
- Guide: what slicer-only data is not read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:14 +00:00
Matthew KnutsonandClaude Opus 5.5 453c6bcb14 Split schema contracts per command file and add shared field types (#2829) (#3558)
* Split the schema contracts into one module per command file

`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add shared schema field types for the next conversions

For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:

- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
  which `add_feature` reads for every feature, flattened into a contract
  with `deserialize_with = "feature_common"`, which keeps the key in the
  message and the issue's path.

The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:13 +00:00
f44ff18ca4 Split Body: each piece can be renamed on its own (#3510) (#3527)
* claim: #3510

* Split Body: each piece can be renamed on its own (#3510)

A split named its new pieces after the split body every time (`Top (1)`),
so renaming a piece did nothing, and renaming the split body renamed the
other piece too (and broke the features that used it). The pieces now
take the names body.rename stores, and a rename keeps the names later
features derive from the renamed body.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:11 +00:00
raykholo 98cd67f029 Joins, cuts and intersects meet their tools where they are shown, across placed components (#3383) (#3384)
* claim: #3383

* Combine: tools from another component meet the target where they are shown (#3383)

Bodies are evaluated in their own component's frame and an occurrence's
placement is applied only for display. Combine passed tool bodies to the
boolean untouched, so a tool in a component placed differently from the
target's was read as if its coordinates were in the target's frame: a
join that overlapped on screen gave two separate shells, and cuts and
intersects missed the same way. Any placement difference did it, a turn
or a plain move, in either direction.

Combine now moves each tool by the inverse of the target's placement
times the tool's own, the same placement used to show the body, keeping
face lineage. A tool placed exactly like the target is left untouched,
so combines within one component give the same result as before.
Moving an occurrence now re-evaluates a combine that depends on it.

* Joins, cuts and intersects draw their tools where they are shown (#3383)

A primitive, extrude, revolve, loft, sweep, pipe or coil that joins,
cuts or intersects bodies draws its tool in its own component's frame,
but each body is kept in its own component's. A target in a component
placed differently (an occurrence moved or turned, or a body moved into
it) met the tool as if the tool's coordinates were in the target's
frame: a join that overlapped on screen gave a separate lump 100 mm
away, and cuts missed the same way.

While such a feature evaluates, the tool now goes into each body's frame
(the inverse of the body's placement times the feature's component's)
wherever the join, cut or intersect meets it, and a body joined into one
placed differently is moved into its frame. Bodies placed as the feature
is are left untouched, so results within one component are unchanged.
Features that name the bodies they change re-evaluate when an occurrence
moves.

This also settles the moved-fastener cut of #439 (Combine, earlier commit).

* Through all and an extrude's contact tests see targets where they are shown (#3383)

An extrude or revolve measured its through-all length, and tested where
its tools meet the targets (a profile on a target's face, coplanar
growth, holes over empty space, taper run-on), on the targets as stored
in their own component's frame. With the tool now moved into a target
placed differently, a through-all cut drawn from the root under a cube
in a component moved 100 mm up was cut only as far as the cube is tall
in its own frame, and missed it.

These features now see the bodies they change that are placed
differently moved into their own component's frame, the same moves the
tools are taken back through, so the length reaches the target where it
is shown. Bodies placed as the feature is are read as before.
2026-10-21 00:54:09 +00:00
raykholo d9d6af51c6 Sheet metal: mirrored and copied sheet bodies stay sheet metal (#3353) (#3354)
* claim: #3353

* Sheet metal: mirrored and copied sheet bodies stay sheet metal

Mirroring a sheet metal body into a new body gave a plain solid: the
opposite-hand bracket had no flat pattern, DXF or bend table
("`Body1 (2)` is not a sheet metal body"). Copies from a body pattern or
Move with copy lost their sheet model the same way.

A copy now takes the sheet model with it (SheetBody::copied). A rigid
copy moves the flat frame. A mirror moves the frame with its x axis
turned round, so the thickness side stays, and mirrors everything in
flat coordinates (x -> -x): base, flange bend lines (run from their far
end, with their end extensions, slopes and tears swapped), panel shapes,
cut-outs, pockets, bores, letters and base sketch lines. Arcs stay exact
and loops keep their sense. A perforation field of a mirrored copy runs
its grid from the right, so its holes are the mirror image too. The flat
length, bends and K-factor are unchanged, and the copy takes further
sheet metal features of its own.

Mirror with combine is unchanged: the joined body has no single sheet
model yet. Mirroring or patterning flange features is still refused.
Sheet models are derived from the timeline, so no design format change.

* Format: note the saved from_right of a mirrored sheet's perforation field

The new `from_right` flag is saved in the design, so it gets a pending
format note. No migration: a field without it runs from the left as
before.
2026-10-21 00:54:07 +00:00
Christian Svensson 38c710e72e Save designs with large STEP imports: compress the STEP part (#3221) (#3285)
* claim: #3221

* Save designs with large STEP imports: compress the STEP part (#3221)

A STEP between 256 and 512 MiB imported fine but could not be saved: a
design stored the STEP text uncompressed, and a design part is capped at
256 MiB. STEP sources are now always Deflated (level 2), may be as large
as an import accepts inside the file, and an import that could not be
saved even compressed is refused with a clear message. Reading stops at a
part's declared size, so a decompression bomb is refused early.
2026-10-21 00:54:05 +00:00
raykholo 5b5b051e02 Delete in Edit Joint deletes that joint, and a refused joint delete says why (#3749) (#3776)
* claim: #3749

* Edit Joint: deleting the joint being edited closes the dialog and deletes it (#3749)

A joint delete was dropped without a word while any dialog was open, and
Edit Joint is a dialog. Deleting only the joint Edit Joint edits now
cancels the dialog first (as its Cancel does) and goes through the usual
selection.delete dry run; Delete with nothing else selected in Edit Joint
targets that joint. Every other refusal (another dialog, a tool, a
computing history, a loading file) now says why in the status bar.
2026-10-21 00:49:50 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 686576e368 Section Analysis: Edit reopens the dialog where the section was left (#3617)
Edit Section Analysis (its menu item, or a double-click on its browser row)
opened the dialog at distance 0 with no plane, so moving the cut on by a
millimetre meant picking the plane and typing the whole distance again.

OK now keeps the dialog's plane pick, distance and flip with the cut they
made, and Edit starts from them while the section shown (or hidden) is still
that cut. The toolbar still starts a new section afresh, and a section made
some other way (a command, an agent) opens the dialog as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:49:48 +00:00
rlartotandClaude Sonnet 5.5 68e4186080 fix(ai-chat): replay with reasoning_effort none when OpenAI refuses tools (#3798) (#3817)
* claim: #3798

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* fix(ai-chat): replay once with reasoning_effort none when tools are refused (#3798)

Newer OpenAI models answer HTTP 400 to function tools on /v1/chat/completions
unless reasoning_effort is "none". On that exact refusal the request is sent
again once with it, and later requests of the chat carry it directly.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:44:52 +00:00
Colin Faulkingham b66ad0a9c9 Move shortcut respects the selected component (#3580) (#3588)
* claim: #3580

* fix(ui): move the selected component from its shortcut (#3580)
2026-10-21 00:44:48 +00:00
amolinari-autotex 2eacbc37f4 Keep sketches out of the Browser Features folder (#3584) 2026-10-21 00:44:43 +00:00
f2f9c6fe27 Settings › AI: Add agent opens from the Home tab too (#3483, #3513) (#3522)
* claim: #3483

* Settings > AI: Add agent opens from the Home tab too (#3483, #3513)

The Add agent dialog was drawn by the chat panel, which Home doesn't
show, so Add agent did nothing while Home was open. It is now drawn
from the frame itself, before Home and the workspace part ways.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:41 +00:00
SS-ENandClaude Opus 5.5 d21e2b1afd Keep picked points when a type-first dimension turns horizontal or vertical (#3168)
Type-first (pick, then type), the dimension's text follows the pointer, and where it goes
picks the kind: across from two points or a slanted line the distance between them, above or
below the horizontal span, beside them the vertical one. The draft kept the value of the kind it
started as, so moving from diagonal to horizontal previewed (and Enter applied) the aligned
length as the horizontal span: the solver moved the picked points (the first dimension of a
sketch even scaled it), so the dimension's extension lines no longer met them.

While nothing has been typed, moving the text now re-derives the draft for the new place, so
its value is what that kind measures and stays selected for typing. A typed value is kept.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:40 +00:00
bherbruckandClaude Opus 5.5 57bcc40838 Release 0.18.2 (#3970)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:08:36 -04:00
bherbruckandClaude Opus 5.5 9974413a5b Ribbon: Finish Sketch follows the last sketch panel (#3958)
* Ribbon: Finish Sketch follows the last sketch panel

The Sketch tab's exit group sat alone at the far right of the ribbon,
about 600 px from the sketch tools on a 1600 px window. It now comes right
after the last panel, as before the redesign. Its room is still kept at
every width, and when panels go into the » menu it moves to the right end
after it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* ui_layout test: Finish follows the last sketch panel, right end only with the » menu

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:08:14 -04:00
bherbruckandClaude Opus 5.5 818af2b856 Icon audit: regenerate the requested-icons manifest (#3969)
The menus no longer ask for offset_one_side, offset_symmetric,
offset_two_sides, pattern_center or pattern_flip, so the manifest check
failed on main and on every UI pull request.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:08:10 -04:00
bherbruckandClaude Opus 5.5 80238a7cfb Sketch: a quick double Esc finishes the sketch (#3950)
* Sketch: a quick double Esc finishes the sketch

One Esc still puts the tool down, then clears the selection, and with
nothing left to cancel keeps the sketch open (#1804). A second press within
0.4 s finishes the sketch, keeping it, the same as Finish Sketch, also when
the first press cancelled a tool.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a double Esc takes away a blank sketch; only Esc twice in a row counts

A quick double Esc on a sketch the user added nothing to removes it in one
undo step, the view and tab going back as on Finish, so no empty sketch is
left behind. A sketch with anything in it is still finished and kept.

The double press counts only for two Esc presses in a row with no tool or
dialog left after the first: any other key in between resets it, and while
a tool is still out (its first Esc only ended a chain) the press puts it
down as before. Tests that press Esc on its own now wait past the window.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 21:57:32 -04:00
bherbruckandClaude Opus 5.5 bd65a561c8 Ribbon: New Sketch on the Surface tab (#3964)
Sketches drive surface extrudes, revolves, sweeps and lofts, so the Surface
tab gets the same Sketch panel as Model and Sheet Metal. A sketch started
there keeps the tab until it opens.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 21:57:10 -04:00
bdd2fb1a5c Fillet and chamfer previews keep moving while a radius or distance changes (#3150)
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:38 +00:00
JZiegener e64f1e0427 Rejoin the split Files table in ATTRIBUTION.md (#3143)
A blank line left after the oracle rows ended the table, so GitHub
rendered the 339 rows after it as one paragraph of pipe-separated text.
2026-10-21 00:44:21 +00:00
CamWightandClaude Opus 5.5 ac362945cc English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501) (#2502)
* claim: #2501

* English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501)

assets/locales/en-GB.json holds only the English messages whose spelling differs in UK English (Centre, Customise, Organisation, Licence, colours, towards, ...), in UK spelling; every other message falls back to English. One registration in i18n.rs (English first, then by id), a test that shows UK spelling and English for the rest, a row in ATTRIBUTION.md, and the docs/localization.md note. The translation-coverage checks skip a regional English catalogue, which has no gaps to report.

Fixes #2501

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:19 +00:00
JEREMYandjeremymiribung-blip 382680d8e8 fix(skills): refresh Boolean checking facts that fail on current release (#1835) (#2093)
* fix(skills): refresh Boolean checking facts that fail on current release (#1835)

* fix(skills): restore warning coverage in test_run and use present tense in Boolean facts

* fix(skills): the slot keeps its side at zero since the solver takes the shortest step

The upstream solver now takes the shortest step that fits (#2060), so the slot
that other constraints also held slides to the origin when the distance reaches
0 and keeps the side it was drawn on when the value comes back. It no longer
comes back mirrored, so the trap and its test state the current behaviour.

---------

Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
2026-10-21 00:41:45 +00:00
Yeonghun LeeandClaude Opus 5.5 316b49cd84 Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040)

A face's sketch fits an edge that is no line or arc (the quarter-ellipses
where fillets meet a slanted face) as splines a hair off the body's edges,
so a join from the face touched the body along a face it did not match and
failed with "boolean Union: no result" after minutes. When the profile is
a whole planar face of the one target, the join now sweeps the body's own
face, which shares its edges and is sewn on along it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040)

A cut from a whole planar face sweeps walls from each of its edges. Where
the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall
only touches the body along that edge, or lies in the face beside it, and
the boolean failed on it with "no result". The cut now keeps the walls that
go into the body, exactly (the body's own edges), runs the outline round
the others well outside the body, and starts a little out from the face.
A cut whose walls all only touch takes a slab beyond its depth plane.

Not covered: a cutting wall tangent to the face beside a touching one (a
round's wall meeting an end face, as in the issue's part); the boolean
still fails there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: leave a whole face outlined by lines and arcs to the profile's own tool

Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Run the whole cut tool from a face under the kernel guard (#2040)

Review: `builder::vertex`, `builder::line`, `Face::try_new` and
`builder::translated` ran outside `crate::guard`; only the sweep was
guarded. `cut_tool` now runs all of it under one guard.

Adds an end-to-end test of a cut into a face the body stands out past
below it (the block's top strip between its rounds): it takes only
what lies over the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test: the slab cut of whole_face_tool, on a spline prism (#2040)

A prism on a closed spline standing on a wider plate, cut 3 into its whole
top face: the slab takes the face's area times the depth and leaves the
plate alone. A test-only counter asserts the slab was the tool, so the test
cannot pass through the profile's own tool. Shortens the name of the
rounded block's top-face cut test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:41:41 +00:00
b0932a487e Document tabs: a right-click menu to close a tab, the others or all (#3055) (#3152)
* claim: #3055

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Document tabs: a right-click menu closes the tab, the others or all of them (#3055)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:39:45 +00:00
rlartotandClaude Sonnet 5.5 edad8078ba Ribbon tooltips: a short written help for the main tools (#2758) (#3089)
* claim: #2758

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Ribbon tooltips: a short written help for six tools (#2758)

Extrude, Revolve, Fillet, Chamfer, Shell and Hole get two sentences under the
tool name in the ribbon tooltip (en, ja, zh). Text only.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* fr: aide des infobulles (6 outils) (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Ribbon help: also in the panel drop-downs (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:39:43 +00:00
Luke JonesandCodex 26c0c19ef7 Preserve imported part names and IGES assembly structure (#1609)
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.

Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426

Co-authored-by: Codex <noreply@openai.com>
2026-10-21 00:39:08 +00:00
raykholo 2f43ad5c5b Loft: a circle lofted to a non-star-shaped profile is split once round (#2570) (#3670)
* claim: #2570

* Loft: a circle lofted to a non-star-shaped profile is split once round (#2570)

A circle section was split at the lead section's vertex directions, kept in
the lead's order and forced to increase by whole turns. A non-star-shaped
lead (a C, a comb) turns back on itself, so the circle wound round many
times and closed with a negative arc: self-crossing walls and a huge mesh
(which froze the web build while meshing it).

The circle is now split exactly once round: at the lead's directions when
they go round once in order (clockwise on a plane facing the other way),
otherwise at the lead's perimeter fractions, evenly as the fallback. Every
arc is finite and positive and they total one turn; the unbounded loop is
gone. Section preparation is split out as loft_section_loops so the
resampled sections can be checked.
2026-10-21 00:30:58 +00:00
rlartotandClaude Sonnet 5.5 6a8604c55d Fix lofts through sections turning past 90 degrees (#2847) (#3452)
* claim: #2847

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* loft: keep sections turned past 90 degrees facing the same way (#2847)

The loft oriented each section by the sign of its normal against the first section's, so on planes turning about an axis every section beyond 90 degrees was reversed and the side faces folded. Follow the facing neighbour to neighbour instead.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:15:41 +00:00
bherbruckandClaude Opus 5.5 4098ff9dc8 Ribbon: New Sketch on the Sheet Metal tab again; tests for entering and leaving sketches (#3946)
* Ribbon: New Sketch on the Sheet Metal tab again; tests pin sketch enter/exit

Before the ribbon redesign the Sheet Metal tab started with New Sketch. It
gets its own Sketch panel again, like the Model tab's, and a sketch started
there keeps the tab until it opens.

Workspace tests pin the ways into and out of a sketch: New Sketch then a
plane, a double-click in the timeline or the browser, and the browser's Edit
Sketch all open the SKETCH tab looking at the sketch. Finish Sketch from the
palette or the ribbon lands on MODEL with the earlier view back. Escape and
Enter keep the sketch open (#1804), and Undo after Finish reopens it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: ribbon layout lists Sheet Metal's Sketch panel

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Workspace test: press the keys well apart

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 21:32:48 -04:00
bherbruckandClaude Sonnet 5.5 97383454c6 Browser rows truncate long names with an ellipsis and a tooltip; Solve Sketch is no longer offered in the UI (#3940)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:32:42 -04:00
bherbruckandClaude Sonnet 5.5 10d7bd045e CI: build and run the tests in one job, sccache on a Blacksmith disk (#3941)
* CI: build and run the tests in one job, sccache on a Blacksmith sticky disk

The tests job compiles and runs the tests itself on the 32 vCPU runner, so a pull request or merge
group uploads and downloads no 3 GB archive (the download took 45 to 385 s per shard, and once
14 minutes) and starts beside the repository checks instead of after them. The archive is built
only for the nightly and manual jobs that need it. sccache moves from GitHub's 10 GB cache, where
about 1100 per-ref entries were evicting each other, to a sticky disk that only main commits.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* TEMP: let this branch save caches so the warm run can be measured

* Revert "TEMP: let this branch save caches so the warm run can be measured"

This reverts commit 1bbbfcf5ff.

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:25:35 -04:00
bherbruckandClaude Sonnet 5.5 6e87fb1a25 Ribbon: Parameters and Configurations back on Model, Sheet Metal and Sketch; Sheet Metal tab always reachable; Finish Sketch button back in the sketch palette (#3937)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:08:04 -04:00
denelson1-dotandClaude Opus 5.5 30e0db1e05 Pattern of a join that merged its targets keeps working (#3378) (#3387)
* claim: #3378

* Pattern and mirror copies of a join that merged its targets join the merged body (#3378)

Since #2755 a pattern or mirror copy of a primitive reuses the seed's targets. When the
seed was a join that merged two targets, the second one no longer exists, so the copies
failed with `unknown body`. The copies now keep the seed targets that are still there;
when none is, the names stay and the error says which body is missing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rerun CI: the previous run was cancelled before any check ran

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:39 +00:00
Dahak BuildsandDahakBuilds 2b1cb2c4e1 MCP batch: rollback restores the original document (#3242) (#3288)
* claim: #3242

* MCP batch: rollback restores the design the batch began in (#3242)

A failed batch with rollback: true reported rolled_back: true even when the
design never went back. Two defects, both fixed:

- file.new (and any document-replacing command) replaced the session with it,
  taking its checkpoints down too, so a batch that failed after file.new had
  nothing to restore. Session::replace_design now carries the checkpoints over
  to the fresh session: the checkpoint belongs to the batch, not to the
  session that happened to be holding the document.
- rolled_back echoed the requested flag. It now reports whether the design is
  actually back: the app answers engine.batch with a new restored field, and
  the MCP tool reports restored && rollback. An app that predates the field
  falls back to undone/completed.

* Batch: answer with main's rolled_back field after the merge (#3242)

Upstream #2900 put the real restore check on engine.batch as
`rolled_back` while this branch named it `restored`; the merge kept
main's control test and this branch's field, and CI caught it.
Standardize on main's wire name: the app answers `rolled_back`, the
MCP tool reads it (fallback for older apps unchanged), docs and tests
follow. The checkpoint carry-over across file.new is unchanged.

---------

Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
2026-10-21 00:15:36 +00:00
f815491936 2-tangent circle: start from the touching circle, not the click (#3141) (#3210)
* claim: #3141

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-tangent circle: start from the touching circle, not the click (#3141)

The tool passed its second click as the place to start solving, and a
click lies on a curve: the circle began centred on that curve, where its
tangency has no side yet. The solve then moved the user's curves to fit
(a rectangle came out skewed), or failed outright when they were fixed.
The command now starts from the centre, nearest the requested point, of
a circle of that radius touching both curves (where the curves moved by
the radius meet), and the tool asks for the circle between its two clicks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:34 +00:00
rlartotandClaude Sonnet 5.5 a595805fc8 Sketch: symmetry about a line pairs line ends by mirror image (#2961, #2940) (#3029)
* claim: #2961

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Tests: symmetry about a line keeps rectangle sides' height (#2961, #2940)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Sketch: symmetry about a line pairs line ends by mirror image (#2961, #2940)

c_symmetry paired the ends of two lines by index. Opposite sides of a
rectangle run in opposite directions, so that forced both heights to 0
(or was refused when a side had a length). Pair each end with the end
of the other line nearest its mirror image, as symmetry about a point does.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:15:32 +00:00
bherbruckandClaude Opus 5.5 0379ee76c6 CI: spread the slowest tests across the test shards (#3646)
* CI: give the slowest tests a shard each

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: spread the slow tests on pull requests too, and keep both junit files

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: pull requests skip the goldens and the action matrix sample unless the kernel changes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: which pull requests run the goldens

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: run the tests in one job on a big runner, slowest first

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: allow the 32 vCPU runner label in actionlint, read junit.xml in the golden hint

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:41:58 -04:00
plexi32andClaude Opus 5.5 4f7ff8c4d8 Move: Point to Point takes the origin point (#3696) (#3718)
The origin point was drawn in the view and listed in the browser, but
nothing could pick it: the viewport never offered it as a hit and the
browser's O row had no selection. A new ORIGIN accept bit lets an input
take it as a vertex of no body; Move's point inputs (From, To, Point,
Pivot) accept it, from the view or the browser's Origin folder.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:13:59 +00:00
bherbruckandClaude Opus 5.5 d2188fb7ab IGES import: a B-spline curve over a tiny knot span keeps its faces (#3885) (#3886)
A curve written over a knot span of 1e-7 or less was refused on the STEP side
("knot vector consists single value"), and both faces it bounds were lost. Its
knots are moved and scaled onto (0, 1), which leaves its shape as it is.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:13:28 +00:00
bherbruckandClaude Opus 5.5 438abbcf82 STEP conformance sweep: the cones to a point read right now (#258) (#3901)
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:03:46 +00:00
Christian SvenssonandClaude Opus 5.5 079a600481 Recovery: autosave every open design tab (#2884) (#2952)
* Fix recovery for unsaved background tabs (#2884)

* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)

After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)

With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:58:05 +00:00
bherbruckandClaude Opus 5.5 94bd8719aa STEP import: a void reads as a cavity whichever way its shell flag points (#3730) (#3872)
A BREP_WITH_VOIDS void's faces face into the cavity, so it encloses volume of
the opposite sign to the outer shell. Its ORIENTED_CLOSED_SHELL flag alone
doesn't tell: SOLIDWORKS writes .F. over a shell already facing into the
cavity, SolidCraft .T., and flipping by the flag added the cavity's volume. A
void enclosing volume of the outer shell's sign is now turned inside out.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:54:54 +00:00
bherbruckandClaude Opus 5.5 fc3dedfd5c STEP import: regression sweep over the step-conformance parts of known shape (#3880)
* STEP import: regression sweep over the step-conformance parts of known shape

Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:07:47 +00:00
bherbruck 41a62d210c File menu: Export STL… and Export 3MF… open the mesh dialog with that format; command search finds mesh export by format (#3873) 2026-10-20 22:43:30 +00:00
bherbruckandClaude Opus 5.5 5638259737 STEP import: a cone bounded only by its base circle reaches its point (#258) (#3871)
A cone face written with no vertex at its point has the base circle as its only
loop (or that circle and a VERTEX_LOOP at the point, which has no edges). Its
surface was spanned over the circle alone, a sliver, so a solid cone came in as
a flat disc. Such a face is now spanned to the apex, and its circle is joined to
the apex by a seam line out and back, as a cone with a seam is written.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:35:12 +00:00
NOWN-DEVandClaude Opus 5.5 090119a5c5 Boolean: a small hole in a large body's face stays a hole when the face is divided (#2579) (#2580)
* Boolean: a small hole in a large body's face stays a hole when the face is divided

A boolean divides faces at a tolerance that follows the larger operand (a few
millimetres on a part a few metres long). A small hole's rim, two half circles
when read from STEP, then became two chords: its polygon in the face's
parameters had no area, and the sign that tells a hole from a face piece came
out at random. The hole became a face of its own, inside out, and the face it
was cut in stayed whole. A box cut round such a hole gave a piece without it,
and the shared part of that piece and a pin in the hole came out negative
("malformed") or the boolean failed.

divide_face now divides a loop whose polygon is flat again, finer (down to a
hundredth of the loop's own size), before reading its sign. Only the polygon
that places the loop changes; loops that have an area are untouched.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Kernel: the long-plate hole test in tests.rs; a flat loop's size from its box

Review: the test moves into the kernel's test file (no file of its own),
and finer_if_flat takes the loop's size from the diagonal of the box round
its sample points instead of the largest distance between any two.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 21:56:33 +00:00
bherbruckandClaude Opus 5.5 522ae77556 Release 0.18.1 (#3851)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:33:29 -04:00
raykholo 5ba8c815a6 IGES import: trim curves with reversed pieces no longer drop their faces (#3358) (#3359)
* claim: #3358

* IGES import: trim curves with reversed pieces no longer drop their faces

A curve on a surface (142) gives each trim loop twice: B in the surface's
parameter space and C in model space, running the same way. Some exporters
write C as a composite curve (102) whose pieces are in order but some of
them end to start. The reader passed those pieces on as they were, so the
loop did not close and the STEP reader left the face out ("face boundary is
not a closed loop").

The pieces of C are now turned to run head to tail, starting at S(B(start)),
the point where the parameter-space curve begins on the surface. That keeps
the loop's sense from the file, so holes still run against the outer loop.
A piece whose ends are one vertex at the sewing tolerance keeps its
direction.

On a 9,276-face trimmed-surface car model, 7,887 faces now import instead
of 3,882.
2026-10-20 17:32:48 -04:00