* claim: #11003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts: input and output schemas (#11003)
parts.library, parts.insert, parts.fastener and parts.resize get typed
contracts and reply types in schema/parts.rs and leave unconverted.txt.
Each key reads as the handler reads it, with its message; the replies
are built from PartsLibrary, InsertedPart and ResizedPart, with the same
JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts schema: Vec3 comes from solidcore_record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts schema: hole picks must start with a list
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* parts.insert schema: the first hole pick must be a point, not any list
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11103
* Hole: Bridge option for counterbores (#11103)
A counterbore hole takes an optional `bridge` length: two 3D-printing
layers that thick below the counterbore's floor, a slot along X across
the counterbore and then a square, both 0.02 mm wider than the hole, so
a printer bridges the step instead of sagging into it. Empty (the
default) keeps a plain counterbore.
The clearance keeps the bore, cut straight through both layers as for a
plain counterbore, clear of their sides: at exactly the hole's width it
ran tangent along them and broke through. The command and the geometry
refuse a layer that is not a positive length, layers that don't fit in
the hole below the counterbore, and a bridge on any other hole type.
The Hole dialog shows a Bridge field below Drill Point for counterbores.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: translate the Bridge label for the complete catalogs (#11103)
Arabic, Hebrew, Japanese, Vietnamese and Chinese carry every English
message, so `cargo xtask i18n --check` needs the new label in each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: bridged counterbores refuse layers past a through hole's exit, too narrow a counterbore and a malformed bridge (#11103)
- Through all, the second bridge layer must end inside a body (exact point classification),
short of the exit face; the tool's reach is no measure of the material.
- A bridged counterbore must be at least 0.04 mm wider than the hole, so the slot's ends have
room on its wall (no square root of a negative number reaches the extrude).
- `solid.hole` refuses a `bridge` that is given but not a length expression (`true`, `[]`, `""`)
instead of making a plain counterbore; `null` still leaves it out.
- Loop2 and Seg2 now come from solidcore_record (main moved them).
- The "nothing saved" check looks for the `"bridge"` key: `format_pending` names
`bridged-counterbore` in every design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Unit defaults test: solid.hole has the bridge field too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11443
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render library: input and output schemas for List, Describe, Targets and Preview (#11443)
Describe, Targets and Preview read their strict parameter types from
schema/render_library.rs, which become their contracts. List keeps its two
readers (the physical profiles' takes availability: null, the other
catalogs' doesn't); its contract takes what either takes. The handlers build
LibraryPage, LibraryResource, LibraryTargets and LibraryPreview instead of
json! literals; a catalog resource is read into ResourceSummary through a
small Listed reader. The physical profiles' replies keep their JSON, which the
schemas describe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render library schema: the list says which availability each catalog takes
render.library.list has two readers: the physical profiles' takes
availability all, usable or null; the other catalogs' (and a call
without kind, which lists surfaces) take all, usable, specification or
blocked, but not null. The schema now says so with an anyOf on kind.
The type still takes what either reader takes: the readers check the
query and the page before availability, so refusing it in the type
would change which message a call with two mistakes gets in strict.
A new test checks that the schema takes ten calls exactly when the
handler does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11723
* Assembly: Move Occurrence says when the part's joints put it back (#11723)
A part that rigid joints hold to something grounded was moved, then put
back by the joint solve after the command, while occurrence.move still
replied with the moved transform. occurrence.move now solves the joints
before it replies. When they put the part back, the reply gives where the
part is, adds reverted: true and a warning that names the joint holding it
and what to change instead. A free chain of parts follows the move as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move Occurrence: the warning names the joint for a part in a repeated assembly too (#11723)
A part inside an assembly placed more than once has no path of its own, so
the reverted-move warning asked for one instead of naming the joint. It now
looks at the placement the caller named, or else the first one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move Occurrence: list the part's joints when no single joint holds it back (#11723)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: hidden occurrences draw no joint-origin triads
A named joint origin's triad (red/green/blue axes, white dot) was drawn for every
origin, so hidden inserted hardware still showed one at its placement. It now
follows the occurrence's visibility (and its parents') and the Joints folder of
the design and of the placement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: a copy's joint-origin triad follows that copy's visibility
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#10871 reworded Lip's refusal on a face that is not a shelled rim to
"Lip needs the rim of a shelled body: ...", but the plastic rig case
cov-lip-on-a-face-without-an-opening-refused still looked for "pick the
rim face of a shelled body". The case now matches the new message, so the
kernel rig's plastic shard passes again on main.
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds assets/branding/logo with the static mark (colour, one-colour
black and white), transparent 512/1024/2048 px PNGs, an outlined
wordmark and a horizontal lockup, all drawn from the app icon's
blue cutout layer. assets/branding/README.md covers use, colours,
clear space, minimum size and the name.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Desktop: closing a design stops its kernel work; same result on any kernel
A design's jobs now run under a stop token that closing or replacing the
design fires: an operation under it refuses to start, and one running ends
at solidcore's next check. The kernel it ran on is not used again. Calls
that answer from a body itself always finish, since a stopped call can leave
what it borrows half-changed, and what fills a body's shared cells is not
stopped.
Every kernel call starts clean (the same random rays, no stations from
earlier calls), so a design builds the same on any kernel of the pool, down
to its B-rep records. The pool is bounded: at most 8 kernels wait between
calls, and at 256 running calls a new call fails rather than grow or wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stop tokens: a copy never stops its design; a stopped job can't decide a refusal
A copy replacing its own design stopped the token it shares with the design
it came from, so that design's later work would be refused. Only the design
itself stops it now. Which face a refusal names no longer depends on whether
the job that found it had been stopped: the refusal is kept with the body,
and a stopped job's probes were all refused, which named the wrong face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: constraint icons stay while the sketch fills the view (#10518)
Constraint glyphs hid as soon as a millimetre of the sketch plane drew smaller than two pixels
(#8980), whatever the sketch's size, so a 500 mm sketch zoomed to fit lost every glyph although
it still filled the view. Below that scale the glyphs now hide only while their anchors span
less than twenty glyphs (300 px) on screen: a small sketch far away still loses them, a large
one that fills the view keeps them. The preference "Hide constraint glyphs when zoomed out" is
unchanged; off, glyphs stay at every zoom as before.
Test: constraint_glyphs_hide_when_zoomed_out adds a 500 mm sketch that keeps its glyphs zoomed
to fit and loses them far away; glyph_zoom_tests covers the span threshold.
* Sketch: glyph span measures only drawn glyphs and stops at the threshold (#10518)
The span check now walks the same constraints the glyph pass draws (one MidPoint glyph per shared midpoint, a pattern's constraints once) and returns as soon as the bounds reach MIN_GLYPH_SPAN_PX, so a large sketch zoomed out costs no more than before.
* Sketch: filter glyph constraints lazily, midpoints in a set (#10518)
* Sketch: measure the sketch, not its glyph anchors, before hiding glyphs (#10518)
* Sketch: collapse the midpoint check into one if (#10518)
* claim: #11303
* Keep Browser and History row interactions independent
* Browser tests: use solidcore_record::Vec3 after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
rfd opens file dialogs through the XDG desktop portal and falls back to zenity
when there is none. The flake's package didn't bring zenity, so on a system
without a portal or zenity, Open and Save showed nothing. The wrapper now adds
nixpkgs' zenity at the end of PATH, after the system's own.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: show complete point coordinates (#11069)
Render measurement item details as wrapping text instead of fixed-height cells. Keep the existing values, units and precision. Add a regression test in the existing measurement UI test module.
Local validation: the regression test compiled, but the Windows GNU test binary crashes with 0xc0000005 even for --list, before tests run. Runtime verification and visual evidence remain pending; this contribution is a draft.
* Keep repository LF line endings in the coordinate fix
* claim: #10994
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare Bodies: input and output schemas (#10994)
inspect.compare gets a typed contract and reply types in
schema/compare.rs and leaves unconverted.txt. Each key reads as the
handler reads it, with its message; `color` checks each colour with the
handler's own color_param, now pub(crate) and re-exported from cmd. The
reply is built from Comparison and its parts, with the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare: drop the json import the typed reply no longer uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare schema: colour strings carry the hex pattern
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11362
* Settings profiles: export and import go through vfs, inside an agent's folders (#11362)
settings.profile.export and settings.profile.import read and wrote their
path with std::fs, so the folder scope an MCP request's allow_paths sets
up never saw it: an agent could write a profile anywhere, or probe any
path. Both now go through vfs (len, read_to_string, write), as file.export
and ui.screenshot do. requests_with_allow_paths_stay_inside_them covers
export and import inside and outside the agent's folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Edit reopens the dialog from the section's own geometry (Show viewport
section status, on by default): the plane is kept as numbers and nothing
is picked. The arrow was placed from the first pick only, so it was gone.
With nothing picked, it now stands on the kept plane, its tip at the cut.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11455
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render stage: input and output schemas for Ground, Backdrop and Clear (#11455)
The three handlers' strict parameter types move to schema/render_stage.rs as
GroundParams, BackdropParams and ClearParams, with descriptions and
JsonSchema, and become the contracts; the handlers read the same types. The
handlers build the shared StageSaved reply instead of json! literals, and the
saved setup is serialized with an error instead of json!'s panic path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7896
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: other components are hidden as components, in one step (#7896)
Isolating a body hid every other body one by one: browser.visibility with `items` writes only
hidden_bodies, so every other component's Browser row kept an open eye and normal text, and
its eye could not bring it back (the first click hid an already invisible component).
browser.visibility takes `isolate: true` with `items` (bodies), as it does with `paths`. The
picked bodies' own placements stay open, their other bodies (and the root's) are hidden one by
one, and every other placement is hidden as a placement. Isolate in the Browser and the view
runs that one command, so it is also one undo step instead of two.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: a hidden Bodies folder or group it is in shows again (#7896)
Isolating a body inside a hidden Bodies folder or group left that folder or
group hidden, so the picked body stayed hidden. Isolate now shows the
folders and groups (with the groups they are in) that hold the picked
bodies; their other bodies are hidden one by one as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: look for hidden folders only when some are hidden, and find body owners once (#7896)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Box, Sphere and Torus: a sketch point picks where they go (#9403)
The Point input of the Box, Sphere and Torus windows took a vertex, a point on an edge or face
and the origin, but not a sketch's points, so a sphere could not be centred on a point drawn in a
sketch. It now takes the points of every shown sketch (POINTS | EXTERNAL_POINTS, as Measure
does): a click fills X, Y and Z with where the sketch puts the point in the world, and a point
selected before the window opens places the primitive there, as a vertex does. The input's chip
names the point and its sketch as Select Other does ("Point 2 · Marks").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box, Sphere and Torus: the sketch point chip label for every complete locale
Main's i18n check wants each message in the complete catalogs (ar, he, ja,
vi, zh); the label has no words, so each carries the same "{point} · {sketch}".
With main's new selection kinds and this one, every Sel variant has its arm,
so the catch-all arm is unreachable (clippy) and goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Primitive at a sketch point: a point picked in the sketch being finished still places it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
document.metadata, document.metadata.set and document.metadata.remove
get input and output schemas: contracts in schema/metadata.rs, checked
in front of the unchanged handlers, and reply types the handlers now
build their replies from. Their lines leave unconverted.txt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A Georgian catalog (assets/locales/ka.json) carrying every English message,
registered in crates/ui-egui/src/i18n.rs, with a row in the new-language test,
a pending attribution file and a terminology note in docs/localization.md.
The catalog is Mkhedruli only; egui's built-in Hack already draws it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11222
* Render: the progress row keeps Cancel whole (#11222)
The progress card is an egui area, laid out within last frame's size. When
the status grew (9 % to 10 %, a longer phase or name), the caption and the
Cancel button were truncated, down to "..." with a long shot name.
progress_action now takes the name and the status apart and gives each part
an explicit width from the room the caller offers (the canvas for the
floating card): Cancel and the status always show whole, a long name is cut
with an ellipsis (full name on hover), then the meter narrows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11527
* Agent chat: a text selection dragged past the edge scrolls the conversation (#11527)
Holding a text selection near or past the top or bottom of the conversation
scrolls it, faster the further out, so a long answer can be selected in one
drag. egui scrolls a label's selection only for the label under the cursor, and
not at all for a table, whose label sits in its own horizontal scroll area.
egui also leaves a label out of the text selection while it is scrolled out of
view: a selection whose start had scrolled away was dropped, and Copy missed
the hidden text. The conversation's labels now take part out of view too,
clipped to nothing, so they keep their end of the selection and give their
text to Copy without being drawn or moving the selection.
* Agent chat: only a drag towards the edge scrolls the conversation (#11527)
A press on a label creates an empty selection on the press frame, so a click,
a double click or a held press on the line by the edge scrolled the
conversation, and so did the start of a drag from there inwards. Scrolling now
waits until the pointer has moved more than 8 points towards that edge since
the press.
* Agent chat: approval titles and pending messages keep a selection scrolled away
They were plain selectable labels, so a selection that started in one was dropped
once its label scrolled out of view, as in the rest of #11527. They now use the
same off-screen-aware label as the conversation's text.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #11483
* Interference: intersect and mesh each overlap on a kernel worker (#11483)
Compute in Inspect > Interference intersected each overlapping pair and
meshed the shared volume on the window thread. Its stack is 1 MiB on
Windows, too small for the kernel's recursion, so the app could close
without a crash message. Each pair now runs through
kernel::map_with_local_pools, on a worker with the kernel's 8 MiB stack,
as inspect.interference and inspect.clearance already do.
* Interference: Compute checks off the window thread (#11483)
On 0.30.0 the report's two parts took the window thread 95 s (x64) to
154 s (x86) in the overlap boolean, and the window stopped responding
until the app was closed. Compute now runs inspect.clearance and the
shared volumes on a copy of the session, on a kernel thread, when the
app runs commands off the window thread (as Find Limits does). The
dialog shows the elapsed seconds with Cancel meanwhile, and drops the
reply of a design changed since.
* Interference: Cancel on its own row while Compute checks (#11483)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
A cut that leaves a body in pieces names them after their faces
(`order_lumps`): the piece whose least face name sorts first takes the
first name, and so on. It moved the names but left the pieces where the
kernel put them. The session then pinned the feature's body names in
that state order, and the next full evaluation (opening the design, or
editing a parameter upstream) handed them out again in a different
order: two pieces swapped names, and a later feature that named one met
the other. Found by a local model fuzzer.
The pieces now also take the family's places in name order, so the
names pinned are the order the next evaluation hands them out in. A
design saved before keeps the names a fresh evaluation gave it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A through-point 0.0000001 mm from the start made an infinite line whose
direction nothing held, and a Line that short had both ends connected to
the origin, a line of length zero. Both now refuse points closer than the
distance at which a new point is connected to an existing one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Design tabs: the tooltip says when a saved design has unsaved changes (#11408)
A tab marks unsaved changes with a bullet after the design's name, and a
long name cut short by the tab hides it. The tab's tooltip, which says
where the design is saved, now adds "Unsaved changes" below for a saved
design with changes not saved yet. A design never saved already says
"Not saved yet". The new string is in a pending locale file, with ten
translations taken from the same words elsewhere in the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Design tabs: the unsaved line in every complete catalog (#11408)
Arabic, Hebrew and Vietnamese are complete catalogs, which must carry
every English message: they get the words they already use for
"Unsaved changes" elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Recovery: the save test waits for the autosave worker before it checks
* Recovery: the save test waits for the autosave worker before it checks
saving_drops_the_entry_and_a_clean_close_leaves_nothing marked the
session saved right after the tick that started an autosave. Under load
the worker was still writing, so the next tick found the write running,
took nothing up and dropped nothing; the file landed afterwards and the
check that it is gone failed (seen in CI on #9021).
The test now ticks, bounded, until the autosave has caught up
(Autosaver::caught_up), as the app's own frames would, before it marks
the session saved. A small helper in the test module does this. The
app's behaviour is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7246
* feat(sketch): enter a dimension's value in a small window with step arrows (#7246)
* Dimension window: fit the layer split, and keep the wheel off the camera over the window
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11171
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test that a line starts on a snap point of an existing shape (#11171)
The Line tool's first click on a line's midpoint, a circle's centre or edge,
a rectangle's edge or a point part-way along a line starts the line there and
ties its start to that shape. In 0.30.0 and 0.30.1 the start was dropped on the
next hover (fixed by #11184); this covers each shape the reports name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic: viewport term in the Appearance section heading, desktop app badge, deeper-overlap note in Find Limits
* Arabic: drop the stray direction mark and match the Refresh wording in the old Node.js note
* Arabic: tanween in the thread fit hint, tap drill wording, crease term in continuity, spline label and setback wording in the fillet help
* Arabic: sweep and boolean terms in the body check note
* Arabic: badge term for the status chips note and summary wording for Fold items in Graphics preferences
* Arabic: tanween, catalog terms and clearer labels in the Assistant, Design and Tools preferences
* Arabic: tanween in the shortcut key prompt, Look At wording in the Assistant follow help
* Arabic: complete the Several choice for bodies folders and use a verb form for the dialogs Open row
* Arabic: orbit style term, Select Other and center-point arc names in Sketch preferences, place-from-origin wording, tanween in the radial menu help, tap makers in the tap drill notes
* Arabic: graphics device term in the blur notes, boss and turn wording in the fillet corner option
* claim: Properties: hold the measuring worker in tests until the card is checked
* Properties: hold the measuring worker in tests until the card is checked
open_object starts the measurement on a worker and looks for the reply
once without waiting. Under load the window side could be held up
between the two, the reply was already in, and two Properties tests saw
the card filled where it should still be measuring (about 0.3 % and 4 %
of runs with 18 tests at a time).
measure_beside now runs a hold before sending the reply. In tests it
waits on the app's existing apply_gate, which feature evaluation already
uses for the same purpose; outside tests it does nothing. Both tests set
the gate, check the card is measuring, then let the worker go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11726
* MCP list_commands: ask for commands by id prefix or panel, ids and labels only, or a page at a time (#11726)
list_commands answered with the whole catalog, every key of 575 commands
(about 350 KB), and could only narrow it by a substring. It now also takes
`prefix` (start of the id), `panel` (a whole panel or tab name), `compact`
(id and label), `fields` (the keys to keep) and `limit`/`offset` (pages, as
{commands, total, offset, next_offset}). With none of them the reply is the
same as before. A batch step naming list_commands narrows the same way, and
a bad argument is an error that names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10437
Co-authored-by: Cursor <cursoragent@cursor.com>
* Lip: say Shell first when the face is not a rim (#10437)
A solid box top left OK disabled with a vague shelled-body hint. Name Shell and the rim-around-an-opening requirement in the refusal, the dialog tip, and the command help.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Lip: keep the dialog hint as it was, match the new refusal text in the test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10981
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Match Surface: input and output schemas (#10981)
surface.match gets a typed contract in schema/surface_match.rs and the
shared FeatureResult as its output, and leaves unconverted.txt. Each key
reads as the handler reads it, with its message; like solid.scale it
declares `name` and `participants` itself, since a match makes no body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow main's kernel merge: world_state and the shared continuity reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface match schema: Vec3 comes from solidcore_record now
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11036
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Physical material property commands: input and output schemas (#11036)
material.properties.validate and material.properties.directional get
typed contracts and reply types in schema/material_properties.rs and
leave unconverted.txt. The card stays the handler's to check; the
direction has the handler's messages. The replies mirror the document's
Validation and DirectionalModulus, destructured in full.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>