Commit Graph
3748 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 063f481ea0 API keys: read the base URL's host the way the HTTP client does (#10953)
The check that lets a key go only over HTTPS or to this computer ended the host part at `/` or
`?`, while the HTTP client also ends it at `#`, so the two could disagree about the host. It now
ends where the client ends it, and over plain HTTP the host part must be exactly this computer's
name with at most a valid port: no user name, backslash or stray character.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 13:18:51 +00:00
Colin Faulkingham 3c806394b0 Edit Sketch: restore timeline and undo state when finishing (#10691) (#10791)
* claim: #10691

* Fix sketch edit completion history (#10691)
2026-11-02 09:37:38 +00:00
Nathan Dane 3ddd73728b Render workspace: one editor per Browser selection; delete the Render studio panel (#6281) (#8000)
* Dispatch the Render inspector by selection on current editors

* Exercise native CPU capture through the Sampling editor
2026-11-02 09:08:23 +00:00
Dahak BuildsandDahak Builds ef939b52eb Parameters: one meaning for value in every reply; round reported numbers (#10747) (#10812)
* claim: #10747

* Parameters: value is mm/degrees in every reply; round reported numbers (#10747)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 08:26:24 +00:00
momysnowandClaude c1612e9234 Move / Copy with Copy on a component copies the component (#9914) (#9930)
* claim: #9914

Co-Authored-By: Claude <noreply@anthropic.com>

* test: Move/Copy copy of a picked component (#9914)

Tests for a component picked in Move/Copy with Create Copy: it is copied as an
independent component placed with the move, the original stays, one undo removes
the copy; a body picked with Create Copy stays a body copy; a component picked
without Create Copy moves its bodies as before.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: Move/Copy copies a picked component as a component (#9914)

With Create Copy ticked and the component pick mode on (or a Browser component
row), a picked component is copied as an independent component (Paste New,
component.paste_new) and the copy moves by the move's transform (occurrence.move
in the world). Bodies picked still copy as bodies; without Create Copy a component
still moves its bodies. The copy and the bodies are one undo step.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: solid.move copies of components reply like a move and roll back (#9914)

A copying move with components replies as a solid.move does: the bodies' feature reply,
with the copies listed in occurrences. The bodies are mapped to their frame before any
copy is made. The solid.move help documents occurrences. A copy that fails part way
changes nothing and leaves no undo step.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: Move/Copy takes a picked component whether or not Create Copy is ticked (#9914)

A component picked in the component pick mode, or a Browser component row, goes into
the Move bodies input as a component, so Create Copy can be ticked after picking it.
Without Create Copy the component still moves its bodies. Not while editing an
existing move. The Browser model tests read the bodies the command would move.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: Move/Copy preview draws a copied component where the copy lands (#9914)

The fast preview took the component's bodies from the listed occurrences as well as the
bodies, drawn moved by the move, so a component copy previews at the moved place
instead of the scratch design's unplaced states. Test: a component-only copy and a
mixed copy preview where the copy lands.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: a copying move refuses bodies that are not a list (#9914)

With components, a bodies value that is not a list was ignored; without components it
is refused. It is refused now, before anything is copied.

Co-Authored-By: Claude <noreply@anthropic.com>

* test: an edited move never takes a component pick, through the click (#9914)

Clicks the component in component pick mode while an existing move is edited: the pick
stays a body. Fails when the editing condition is dropped.

Co-Authored-By: Claude <noreply@anthropic.com>

* fix: Move/Copy preview takes components only for a copy, and the mixed test can fail (#9914)

The engine refuses `occurrences` without `copy`, so the preview leaves
such params to the full preview too. The mixed-copy test now gives the
component a taller box, so its height shows the component was drawn.

Co-Authored-By: Claude <noreply@anthropic.com>

* docs: component_pick no longer needs Create Copy ticked (#9914)

Co-Authored-By: Claude <noreply@anthropic.com>

* test: a component picked with its parent is copied once (#9914)

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 07:56:22 +00:00
Yogesh DandClaude Opus 5.5 544de55baa Localization: Russian "Close draft" reads as a draft analysis (#9284) (#9387)
* claim: #9284

* Localization: Russian "Close draft" reads as a draft analysis (#9284)

The report form's "Close draft" button said «Закрыть анализ уклонов»
(close draft analysis). It closes the report draft: «Закрыть черновик»,
the word the Russian catalog already uses for this draft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 07:31:59 +00:00
semmelrindeandClaude Opus 5.5 29a6bbdb43 Hole: say when a hole removes no material, or all of a body (#10701, #10702) (#10836)
* Hole: a hole moved off the material says it removes no material (#10701)

A hole whose position, parameter or sketch point moves it off the part
cut nothing and said nothing: the feature had no warning, and a
parameter sweep listed the value as fine. A hole whose tool is clear of
every body it cuts now warns "the hole removes no material" ("1 of 2
holes remove no material" for several), as a pattern does of its
copies. The check compares boxes only, from the meshes the hole already
found its face on, so a large hole pattern costs no extra booleans.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: a hole wider than the part says it removes all of it (#10702)

A through hole wider than the part removed the whole body with no
message, also when a parameter widened it later. The hole now warns
"the hole removes all of Body1" when a body it cuts is gone after the
cut.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 07:13:00 +00:00
github-actions[bot] a169ad4194 Regenerate generated files and fold pending files [skip ci] 2026-11-02 07:21:59 +00:00
semmelrindeandClaude Opus 5.5 d907078434 Section details card: every row shows, and the numbers read like the pill (#10708) (#10799)
The card's area is as tall as it was the frame before, and the first
frame laid the body out shorter than it ends up, so the scroll area
stayed short and the Hatch row (and Flip, for a tilted plane) was cut
off. The card may now grow to the height it is allowed.

The offset is shown to the design's length decimals and a tilted normal
to three places, as the pill shows them.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 06:53:46 +00:00
073bbc3f00 Assemblies: a construction axis follows its component when the component rotates (#10127) (#10212)
* claim: #10127

* Assemblies: a construction axis follows its component when the component rotates (#10127)

A construction axis or point built on a body now goes with that body when
Move/Copy moves or turns it. Each construction records the bodies its picks
lie on; the Move feature (not a copy) carries along every construction whose
bodies it all moved, with the same transform in the construction's component
frame. One that also reads something fixed stays where it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 06:40:58 +00:00
alfonsotamesandClaude Opus 5.5 9e5e143ac3 Sheet metal: a fold crosses slanted or curved edges of any panel (#10621) (#10922)
sheet.fold refused any fold whose bend zone wasn't a rectangle. It now
crosses the sheet's own outer edges, slanted or on any curve: the outline
is cut exactly across the zone, the panels keep their real outlines, and
flanges and other folds still go on them. The flat pattern's DXF keeps the
curve as drawn. A sharp corner in the zone stays refused.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 05:24:50 +00:00
Tarek 0dd8d9e5ec Add a dialog for Create Components from Bodies (#10919) 2026-11-02 05:23:00 +00:00
bherbruckandClaude Opus 5.5 9fdf153054 Agent chat: only the chat's own tools skip the panel's question (#10955)
A permission question counted as one of SolidCraft's own tools when its title merely contained
"solidcraft". Now the whole title must be a tool of the chat's own MCP server, named as
`mcp__solidcraft-app__<tool>`, and its kind must be `other` or not given. Anything else goes through
the user's mode and remembered answers, or is asked in the panel.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 05:15:42 +00:00
Dahak BuildsandDahak Builds 5336007c2b Section Analysis: view.pick skips edges and vertices in the removed half (#10704) (#10712)
* claim: #10704

* Section Analysis: view.pick skips edges and vertices in the removed half

near_edges now applies the same section `kept` predicate the mouse picker
uses (viewport::pick, since #6722), so an agent picking through view.pick /
ui.pick no longer gets edges and corners the user cannot see.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-02 04:38:22 +00:00
bherbruckandClaude Opus 5.5 21fc384e40 Control channel: a new connection has five seconds to show its token (#10961)
A client could connect and send nothing, or only blank lines, and hold one of the 16 connection
seats for as long as it liked. All reads before the token now share one five-second deadline; the
connection is then closed without a reply. An authenticated connection may idle as before.

`solidcraft-cli mcp --connect` used to open a connection at start and hold it until the first tool
call. It now only checks that the app is there, and the first call connects.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 04:23:23 +00:00
bherbruckandClaude Opus 5.5 5d6a80ff35 Control token file: no file in a custom folder when icacls times out (#10958)
On Windows the token file is restricted with `icacls`, which may not finish in time (#6145). That
counted as success everywhere, and is safe in the default folder, the user's own local app data.
A folder picked with SOLIDCRAFT_CONTROL_DIR may be readable by others, so there a timeout now
removes the still empty file and returns an error. The default folder behaves as before. The
decision is a small function of its own, tested without running icacls.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 04:08:13 +00:00
bherbruckandClaude Opus 5.5 9636188a0f Lock files: never written or read through a link (#10951)
A design's lock file went through the same writer as the design, which follows a symbolic link
so a linked design is saved where it lives. The lock now has a writer of its own that refuses
anything at its path but a regular file and replaces only that name. Reading a lock takes only a
regular file and no more than a lock's size. Saving a design through a link works as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 03:53:28 +00:00
github-actions[bot] ec39a8ebb4 Regenerate generated files and fold pending files [skip ci] 2026-11-02 06:12:24 +00:00
semmelrindeandClaude Opus 5.5 450cc8b389 Russian: translate the 20 messages main gained after batch 7, construction lines included (batch 8) (#9445)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 03:32:48 +00:00
bherbruckandClaude Opus 5.5 3c12c36bef Security policy: say what counts as a security issue and what's a normal bug (#10946)
Also points the links at tangency-labs/solidcraft. The old list asked for reports of file access outside the allowed folders, and for crashes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 03:29:43 +00:00
MarkusReandClaude Opus 5.5 6e67ae34b0 Agent chat: keep transcript shortcuts out of CAD (#10576)
Selectable transcript labels do not request TextEdit focus, so the global
clipboard handler also copied, cut and pasted selected CAD geometry while
the user worked with chat text.

Keep keyboard ownership with the visible chat after a pointer press until
the next press outside it. Release it when the panel is hidden, and do not
use selections from other native viewports as a global CAD shortcut guard.

Cover real label selection, clipboard events, fallback key events, quick
select-all, hidden panels and deliberate return to the CAD viewport.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 03:24:30 +00:00
SilentWolf75andCursor 1cbebe21bf Edit Hole: seed the face where the hole is now (#10689) (#10860)
* claim: #10689

Co-authored-by: Cursor <cursoragent@cursor.com>

* Edit Hole: seed the face where the hole is now (#10689)

Project the stored position onto the drilled face along the hole direction when opening the editor, matching evaluation, so OK works after a parameter moves the face.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-11-02 02:39:25 +00:00
github-actions[bot] 25a19cdefe Regenerate generated files and fold pending files [skip ci] 2026-11-02 05:40:52 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 12ebc80e15 Cosmetic tap markings: look for their cylinder only in nearby bodies (#10303)
* Holes and cuts: count the bodies a cut works on in the cost tests

A test helper, cut_work, adds a feature at the end of a design and reports
how many bodies its cut ran booleans on and which bodies it left exactly
as they were (same geometry, key and face names). A new test pins that a
cut still goes through the boolean where its tool touches a face, runs
along an edge, passes a hair beside a body or drills into a dome.

The sheet metal hole (#10226) and cosmetic thread (#10227) work reuse the
helper for their own shortcuts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Holes and cuts: leave bodies the tool cannot reach untouched without a full cut

A cut ran a whole boolean against every body of its component, and for a
body its tool does not reach that boolean only handed the body back: about
7 ms per body, so a hole in a design of 200 blocks took 1.3 s. Now a body
whose box lies clear of every tool's box is left as it is. Both boxes are
their meshes' grown past how far the exact faces can curve out from them,
the same test sheet metal cuts already use, so a tool that touches a body,
grazes it or drills into a dome still goes through the boolean. Bodies
shown in another frame, mesh bodies and Intersect (which removes the
bodies it misses) are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cosmetic tap markings: look for their cylinder only in nearby bodies

A tap marking (a Thread feature, or the marking of a tapped hole) looked
for the cylinder at its point in every body of the design, and each
search meshes the body afresh: with many bodies and many markings that
grew quadratically (200 markings on 200 cylinders: 33 s of a 33 s run).
A body is now passed over when its box, from the mesh it keeps and
grown past that mesh's deflection, lies farther from the point than the
search itself would look (a twentieth of the body's size, plus its own
mesh's deflection). The search finds no face there, so the marking and
everything else stay the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 02:15:18 +00:00
dudedagger42andClaude Opus 5.5 b470d46ffc Sketch: rebuilding a projection keeps the sketch's own curves on its points (#5388) (#5537)
* claim: #5388

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: rebuilding a projection keeps the sketch's own curves on its points (#5388)

When a projected face changed shape, update_link rebuilt the link with
drop_link_entities, whose remove_points also deleted every curve using a
projected point: a circle the user drew on a projected hole's centre vanished,
and the extrude on it lost its profile. Before the projected points go, the
sketch's own curves on them move to a free point at the same place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 02:09:59 +00:00
VvynotandClaude Sonnet 5 6e98bd474e Grid: a selected plane previews before Create Sketch (#10804) (#10900)
Selecting a plane in the view now draws the grid on it, so the plane a
sketch would use shows before the button is clicked. Deselecting returns
the grid to the ground.

Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
2026-11-02 02:09:30 +00:00
Colin Faulkingham ad23882080 Assistant: recover when an agent ignores Stop (#10800) (#10916)
* claim: #10800

* fix: recover when ACP agents ignore Stop
2026-11-02 02:09:27 +00:00
ABDULLAH 63fb818f33 Arabic: profile label in the dialog selection list matches the curve and constraint labels (#10927) 2026-11-02 02:09:25 +00:00
dudedagger42andClaude Opus 5.5 96509412e9 Extrude: a Cut To the far side of a curved wall takes the wall (#8634)
A Cut To Object on a curved face ran the tool through the target and kept
the tool less the body, the piece at the start. From outside a curved wall
to its inside face that piece is the air before the wall: the cut took
nothing, or the tool lay in the curved face and the boolean failed on the
coincident faces.

Where the target's material ends at the picked face under the whole
profile (rays over the profile cross it once, material before, none
after), the tool now ends flat halfway across the gap beyond the face. It
takes what lies before the face and meets no face of the body. Otherwise
the trim is as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 02:01:42 +00:00
froglemonade2andClaude Opus 5.5 f2ffd8d233 Save As: refuse a name that opens as another kind of file (#9745) (#9752)
* Save As: refuse a name that opens as another kind of file (#9745)

file.save and file.save_as wrote a design container under any name, so a
design saved as part.step was refused when opened again and part.stl opened
as a broken mesh. A name doc.open reads as a STEP/CAD exchange file, a mesh,
a 2D drawing, a point cloud or a SolidCraft drawing is now refused, pointing
to .sc and, for export formats, to file.export. Names that open again as the
design (.sc, legacy extensions, .json, anything else) save as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Save As: check the folder scope before the design name (#9745)

A path outside an agent's folders is refused for that first, whatever its
extension, as before; the design-name check runs after it in `write`. Fixes
solidcraft-mcp tests::tool_calls_stay_inside_the_agents_folders, which saves
`x.step` outside the agent's folders and expects the scope refusal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 01:51:19 +00:00
SilentWolf75andCursor 2b08e0c6a7 AppImage: refresh the icon cache so the taskbar shows the mark (#10673) (#10858)
* claim: #10673

Co-authored-by: Cursor <cursoragent@cursor.com>

* AppImage: point the taskbar at the installed icon PNG (#10673)

Install hicolor icons before writing the desktop entry, refresh the icon cache, and set Icon= to the absolute 256×256 path so Cinnamon and similar panels show the mark instead of a thin strip.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-11-02 01:50:44 +00:00
1885fa739b Assemblies: a second planar joint can be added (#10331) (#10371)
* claim: 10331

* Assemblies: a second planar joint turns its part a half turn to meet (#10331)

A second planar joint between two boards that mates faces pointing the
same way needs the board turned a half turn on the first joint. The loop
solve starts exactly turned away, finds no way round, and left the new
joint as a conflict; Move then said the part has no movable joint axis.

A new loop-closing joint now tries its own angle, each angle on the
joint path between its two parts, or one of each, a half turn round, as
the first joint of a chain moves its part into place, and keeps the
first that closes the loop without a new conflict. Faces that can never
meet stay a conflict and nothing moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move test: give the blocked part faces that can never meet (#10331)

The blocked-Move test from #10509 used two boards whose second planar
joint mates two faces pointing the same way. That joint now closes its
loop with the board turned a half turn, so the scenario no longer
conflicts. Mate the yellow front against the red top instead, which no
turn on the first joint can bring together.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 01:29:29 +00:00
github-actions[bot] cacfbbc578 Regenerate generated files and fold pending files [skip ci] 2026-11-02 05:03:27 +00:00
JoberndoandClaude Opus 5.5 2ae13ba9cf Feature editor: Undo, Redo and the History bar wait while an editor is open (#10688) (#10786)
* claim: #10688

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Feature editor: Undo, Redo and the History bar cancel an open editor first (#10688)

Undo, Redo and History steps changed the design under an open feature
editor, whose OK and Cancel then refused it. They now cancel the editor
first, putting its marker back, as starting another tool already does.
While an editor is still opening they wait for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:36:34 +00:00
raykholo e91f5d73bd Joints: a typed joint that closes a loop starts where its parts are (#6061) (#10336)
A relation given no values already started from where its parts sit
(relation_values), so the part moves no further than it must. A typed joint
(planar, revolute, cylindrical ...) added between parts another joint
already relates started its values at 0 instead, so the loop solver began
far from the current placement and could report a conflict for a joint that
agrees with how the parts are placed.

Seed every loop-closing joint, typed or relation, from the current
placement when no values are given. Joints in an open chain and joints with
explicit values keep their initial values as before.
2026-11-02 00:24:33 +00:00
github-actions[bot] da501178aa Regenerate generated files and fold pending files [skip ci] 2026-11-02 04:35:57 +00:00
Daniel KatzandClaude Opus 5.5 3231f049d0 Insert Part: ASME/ANSI inch hex cap screws, hex nuts and SAE/USS washers (#10316) (#10335)
* claim: #10316

* Insert Part: ASME/ANSI inch hex cap screws, hex nuts and SAE/USS washers (#10316)

Part of #10316. New standard-part families, tabled in inches as the
standards give them and built in millimetres: hex cap screw (ASME
B18.2.1) and hex nut (ASME B18.2.2), 1/4 to 1 in UNC and UNF from the
thread catalogue, and plain washers SAE and USS (ANSI B18.22.1 Type A).
Cap screws take the standard inch lengths, 1/2 to 8 in, defaulting to
the first at or above 2.5 d.

Lengths read as fractional inches in Insert Part, Change Part Size, part
names and part numbers. Insert Part gains a Unit system list (Metric,
Inch) above Type; it opens on Metric. parts.library reports each
family's system.

Inch parts get no cosmetic thread: solid.thread takes only metric
designations (#9571), and the old path would have made a wrong metric
mark. 9/16 waits for the thread catalogue; split lock washers and
carriage bolts follow in later PRs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:21:21 +00:00
semmelrindeandClaude Opus 5.5 a22ea76ab6 Feature editor: a section, an analysis or the selection changed while it is open leaves OK and Cancel working (#10687) (#10822)
The editor accepts revision changes that only changed what is shown,
counted by the display revision, but only hiding and showing counted
there. Section Analysis, the surface analyses, continuity, the
selection, the status pill catching up and view.render_select bumped
the revision alone, so turning a section off with an editor open made
OK refuse ("the design changed while the feature editor was open") and
Cancel leave the timeline rolled back. They now go through
refresh_display, as visibility changes do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:18:00 +00:00
austin62jakeandClaude Opus 5.5 a735620aa8 Circular pattern: the axis origin takes length expressions and follows them (#10852) (#10855)
* claim: #10852

* Circular pattern: the axis origin takes length expressions and follows them (#10852)

solid.pattern.circular with axis {origin, dir} kept its origin as plain
numbers, so a pattern about a parameter-driven point stayed where the
point was when the pattern was made: the seed moved with the parameter
and the copies did not. Expressions were refused (#248).

The pattern's origin is now a point of expressions, as a Mirror plane's
origin is: numbers or length expressions, evaluated on each rebuild, and
renamed with their parameters. Plain numbers are saved as numbers, as
before. timeline.edit sets pattern.origin as expressions, and editing the
pattern in its dialog keeps them. One pending format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:17:15 +00:00
rugbymauri 059119b345 solid.move: an inserted part moves in world space beside another body (#9660) (#9683)
* claim: #9660

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Move bodies of differently turned components in the world together (#9660)

A Move feature moves each of its bodies in the body's own frame by one
vector and one turn. `solid.move` mapped the world vector and axis into
the frame of the first body listed only, so a body in a frame turned
otherwise (a part inserted with a non-default direction, moved together
with a block of the root) moved along its own axes.

When the bodies listed lie in frames that turn differently (or, for a
turn, also sit in different places), the move is now split into one
Move feature per frame, each with the vector and axis mapped into that
frame, in one undo step. Bodies sharing a frame still make one feature.

Fixes #9660

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-11-02 00:16:56 +00:00
jeromehzl e016c40f43 Sketch Intersect: picked faces meet as their whole surface, not the span under the pick (#9009) (#9107)
A surface extruded from a fit-point spline is one B-rep face per span,
joined by hidden seams; the viewport picks and highlights it as one face
(Mesh::surface_patch). sketch.intersection_curve turned a face pick into
the single nearest face, so the curve stopped at that span's ends.

project3d::mesh_of now returns the picked face's surface patch and
mesh_intersection keeps the triangles of every face in it. Body sources
and Project to Surface are unchanged.
2026-11-02 00:16:06 +00:00
austin62jakeandClaude Opus 5.5 1fb9dadcd9 Language: a Traditional Chinese system opens in Traditional Chinese, macOS's zh-Hant-TW included (#10306) (#10307)
* claim: #10306

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Language: a Chinese system tag goes by its script, then its region (#10306)

macOS lists its languages with a script (zh-Hant-TW), which no catalog
matches exactly, so the base zh (Simplified) was picked for a Traditional
Chinese system. Hong Kong and Macao tags got Simplified the same way.

A Chinese tag now picks zh-TW for the Hant script, zh for Hans, and
without a script zh-TW for the TW, HK and MO regions, zh otherwise.
Other languages keep the exact tag, then the base language.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:15:53 +00:00
github-actions[bot] 91a19548d3 Regenerate generated files and fold pending files [skip ci] 2026-11-02 03:47:23 +00:00
a277839236 Section Analysis: tilting the plane rebuilds the outline index once, not on every drag frame (#10373)
* claim: sectiontilt

* Section Analysis: tilting the plane no longer rebuilds the outline index every frame (#10373)

The section outline cut through an index of slabs along one normal, rebuilt
whenever the normal changed: tilting a Section Analysis rebuilt it every
drag frame (about 0.15 s on a 2.5 million triangle part). The index is now a
grid of cells holding each triangle by where its box sits, with the box
around each cell's triangles, so it serves every normal. It finds the same
segments, in the same order and to the bit, as cutting every triangle.

The viewport keeps one index per shown body mesh, no longer per normal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:15:29 +00:00
cronos b5d931ff4c Preserve offset distances when trimming their source line (#10391) 2026-11-02 00:15:27 +00:00
Christian Glombek d7a17de3d9 Sheet metal: a perforation field bounded by a sketch's outline (#732) (#10754)
`sheet.perforate` takes an optional `sketch` (and `profiles`): the field's
outline. Holes go only inside its closed profiles, out of their inner loops,
`margin` clear of its edges, on a grid from the outline's lower-left corner.
On a folded sheet the outline maps through each panel the sketch lies on and
is clipped to it, so it never reaches a flange in the flat; a sketch on no
face of the sheet is refused. A mirrored copy mirrors the outline, and an
edit that names no sketch (the Perforate dialog has no outline) keeps it.
Without a sketch the field covers the whole sheet as before.

The feature saves `sketch` and `profiles`, a sheet's perforation its outline
in flat coordinates: one pending format note, no migration.

Assisted-by: LLM
2026-11-02 00:14:41 +00:00
leValdemar19andClaude Opus 5.5 a33619fd2b Tangent Plane: line it up with a reference plane, at an angle (#8822) (#9002)
* claim: #8822

* Tangent Plane: line it up with a reference plane, at an angle (#8822)

`construct.plane.tangent` takes an optional `reference` (a plane or planar
face) and `angle`. On a cylinder, cone or torus the plane touches where the
face turns towards the reference, turned by the angle about the face's axis,
on the side of the pick; on a sphere it is parallel to the reference. The
plane follows the reference when it moves. The Tangent Plane dialog gets a
Reference plane input and, once one is picked, an Angle field; editing the
plane brings both back. Saved as a pending format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:13:22 +00:00
austin62jakeandClaude Opus 5.5 e4e3c8609c OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074) (#9213)
* claim: #9074

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074)

The OBJ writer joined vertices only when their coordinates were equal bit
for bit, but each face of a curved body writes its edge points again a few
ulps apart, so neighbouring faces shared no vertices and the file reopened
as an open mesh with no volume.

It now welds each body as the STL and 3MF exports do (threemf::weld_tagged,
with the same tolerance), and every corner keeps its normal: the normal of
the original corner it came from, or for a point a side was split at, the
normal interpolated across the triangle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:13:06 +00:00
CamWightandClaude Opus 5.5 325917f2ae Ambient occlusion: no artifacts on the preview or on hollow bodies (#9327) (#9335)
* Ambient occlusion: the radius follows what the frame draws (#9327)

In an empty design the radius came from the model's box, which is empty, so a
preview got the smallest radius and the depth map's precision showed as specks.
It now comes from the box the depth range uses, and with nothing to draw there
is no occlusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ambient occlusion: the term drawn once and blurred by depth (#9327)

The lit pass worked the term out for every fragment it shaded, under a pattern
that changed from pixel to pixel, which read as grain. The term now has its own
texture, drawn once for each pixel of the prepass, with a fixed 4 x 4 pattern, and
a 4 x 4 blur that keeps to each pixel's plane takes the pattern out without
crossing an edge. The lit pass reads the result. The prepass and the term share
their pipelines and draw walk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 00:12:57 +00:00
austin62jakeandClaude Opus 5.5 5ad2503503 Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373) (#9393)
* claim: #9373

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373)

timeline.redefine runs the edited feature's command on a scratch copy with the marker just after
the feature, and takes the new definition from the feature that run makes. Inside a timeline
folder that trial feature joined the folder too; it was removed from the feature list but not
from the folder, and its id, handed back, was the next feature's. Each edit left that id in the
folder (the same one, edit after edit), naming no feature or, once a later feature took it, a
feature twice, and the reader then refused the design: "damaged design: invalid feature in a
timeline folder". The trial feature now leaves the folders as it leaves the feature list.

The reader drops a folder entry naming a feature or joint the design doesn't have, or one a
folder already holds, and opens the design: folders only group the timeline, so nothing else is
lost. A folder damaged in itself is still refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 00:12:50 +00:00