Commit Graph
1538 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 03e6c3d468 Version 0.16.2
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 00:40:00 +00:00
bherbruckandClaude Opus 5.5 cbf589eb8c Revert #2142: orbit pivot choice back to 0.15.0's, as in 0.16.1 (#2832)
This reverts commit cac4bccea8. Orbiting
about the point under the cursor goes back to 0.15.0's pivot choice
(the picked face or vertex point, an edge's midpoint, or the visible
geometry's centre over empty space), matching 0.16.1.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 20:36:37 -04:00
bherbruckandClaude Opus 5.5 9c411859bc CI: self-hosted test shards build in their warm directories, no 3 GB download (#2833)
On main and in the merge queue every test shard ran on the self-hosted machine but waited for
the GitHub-hosted Build tests job and then spent about 12.5 minutes downloading its 3.2 GB
archive (four shards at once over one connection). There, each shard now builds the tests in
the runner's warm build directory (the existing build-tests one) and runs its slice directly;
Build tests runs only where the shards run on GitHub's or the untrusted runners.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 20:35:03 -04:00
bherbruckandClaude Opus 5.5 22a86a744e CI: keep the fast self-hosted runners for main and the merge queue (#2830)
Same-repo pull requests ran their heavy jobs on the three fast runners too, and the merge
queue's test shards waited behind them for hours. Pull requests now use the GitHub-hosted path.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 20:31:22 -04:00
bherbruckandClaude Opus 5.5 e887792182 Fix orbit about the picked point (regression in 0.16.0) (#2753)
Orbiting about the point under the cursor (or the origin) turned the camera
about its target and then panned to put the pivot back. The pan works at the
target's depth with the parallel-view scale, so in a perspective view the
pivot slid off its pixel and the model swung about the camera.

The camera now turns rigidly about the pivot: Camera::orbit_about keeps the
pivot's coordinates in the camera's frame and rebuilds the target from the
new orientation, so the pivot stays exactly on its pixel in both projections.
The Shift snap spring and view.navigate's pivot orbit use the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 22:51:37 +00:00
rlartotandClaude Opus 5.5 dd23be12d5 UI: the Interference dialog and the continuity legend's Gap are translatable (#2443)
* UI: the Interference dialog and the continuity legend's Gap are translatable

The Interference dialog's title, its Bodies input, the Compute and Compute
again button, the checked-bodies count, "could not be checked" and the
clearance error were English in every language. They now come from the
catalogs (en, ja, zh, de, ko, fr).

The continuity legend's Gap (an opening between faces) and the sheet-metal
hem's gap shared the message "Gap", translated as the hem's gap (French
"Jeu"). The hem keeps those translations under ui.sheet_gap; the legend
gets ui.continuity_gap, and both read their message by id.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* Polish: the sheet-metal gap is ui.sheet_gap too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* Every catalog gives the continuity legend's Gap the word it showed before

The catalogs without their own ui.continuity_gap would have fallen back to
English in the legend; they now keep the translation the shared Gap gave
them. French and German keep separate words.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 18:11:18 -04:00
tdslot ab22da1343 Browser sidebar: drag its width, and float it over the workspace (#2741)
* Browser sidebar: drag its right edge to size it, and remember the width

The left browser sidebar was fixed at 250 px. Its right edge is now a drag handle: the width follows the pointer, is clamped to 170-620 px, and is kept in the preferences (browser_width) so it survives a restart and Reset Defaults returns it to 250. The few pixels of grip sit inside the panel's own margin, so the tree rows and the scroll bar keep their input.

* Browser: float the tree over the workspace on a translucent card

Preferences -> General gains "Parts browser -> Float it over the workspace": the tree then draws on a card over the 3D view instead of taking a column, so the workspace keeps the whole window width. The card hugs the tree, scrolls past 70 % of the view's height, and uses the remembered browser_width. The canvas keeps every point the card does not cover, and turning the preference off docks the browser again.
2026-10-18 18:11:11 -04:00
011ff24107 fix(i18n): unify font baseline for CJK UI (macOS, Linux, Windows) (#2123)
In a CJK UI, the primary CJK face goes first in Proportional, so digits, units and
symbols in mixed labels share the CJK text's metrics and baseline. A Korean UI puts
the Hangul face first. The user's ~/Library/Fonts is scanned for a CJK font on macOS.

Rebased onto main as one commit (main had added the Thai fallback).

Co-authored-by: Mithril-3d <145893541+Mithril-3d@users.noreply.github.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:11:03 -04:00
4a4eb59788 3MF import: read objects in other model parts (production extension) (#2089) (#2127)
* claim: #2089

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: read objects in other model parts (production extension) (#2089)

Slicers save multi-part projects with the 3MF Production extension: the
root model's objects are components with `p:path` naming another model
part of the package, which holds the meshes. The reader skipped those
components and build items, so such files did not open at all.

Components and build items now keep the part they name, and the parts
objects name are read once each (looked up through an index of the zip
entries), with the number of part names and their total size capped.
Each part's unit is applied as it is read, so parts in different units
fit together. Cycle detection keys on (part, object), so parts that
place each other in a loop are refused.

Tests: components and build items in another part, part names in any
case, a part in centimetres under a root in millimetres, and hostile
packages (missing part, a path out of the package, an empty path, an
unknown object, a part that is no model, a loop between parts, more
part names than a package can hold). The 3MF mutation fuzz also runs
on a production-extension package.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: count every placement toward the budget (#2089)

An object that only places other objects added nothing to the triangle
budget, so a few objects each placing hundreds of components multiplied
at every level up to the depth cap (300 components, 3 levels: about 1 s;
deeper never finished). That was already true for one model part and now
reaches across parts. Every placement now costs at least one unit, so
such a file stops at the budget.

Test: six levels of 300 components over an empty object (300^6
placements) stop with a budget error in well under a second; without
the change the test does not finish.

Suggested in review by @jyviko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:56 -04:00
bherbruckandClaude Sonnet 5.5 207c67d1da Flatpak smoke test: wait for the viewport before the Wayland probe (#2736)
The control port opens before the first frame, so a single ui.inspect sometimes returned no viewport and the check failed within seconds. The probe now polls ui.inspect until the viewport exists, for up to 60 s, and fails with the last reply if it never does.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 18:10:49 -04:00
bherbruckandClaude Sonnet 5.5 ff5d96aaad Docker: accept trunk's shorter content hashes (#2734)
Trunk formats the content hash without leading zeros, so it is sometimes 15 hex characters. The immutable-cache rule and the smoke test's wasm match now accept 8 to 16.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 18:10:43 -04:00
Jackson OurslandandClaude Opus 5.5 bc68e14c3e Mutation testing: judge kernel mutants by the black-box suites (#2660)
The kernel will move from truck to solidcore (#1597). The tests that must
catch regressions across that switch are the ones that don't depend on the
kernel: the reference tests and the robustness goldens. cargo-mutants checks
whether they would notice a change in the kernel's behaviour.

- apps/solidcraft-cli/tests/oracle_cases.rs: the reference tests as a cargo
  test (ignored; CI keeps replaying them through cargo xtask oracle), run
  over one process per core.
- .cargo/mutants.toml: mutants are judged by that test and the pull-request
  sample of the robustness goldens, not by the kernel's own unit tests.
- A mutants profile (ci with incremental builds): about 15 s to rebuild after
  a kernel change instead of about 3 minutes.
- docs/mutation-testing.md: how to run it, its cost, two cargo-mutants 27.1
  problems and the pilot's results (15% of sampled kernel mutants caught).

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-18 18:10:36 -04:00
6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
bherbruckandClaude Opus 5.5 dded27277f Version 0.16.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 20:16:56 +00:00
bherbruckandClaude Opus 5.5 46462957e4 Revert "CI: run the triage and claim bots on the trusted light runner (#2655)" (#2735)
The trusted runners' guard refuses issue and pull_request_target events by design (they carry a
write token and handle untrusted input), so the bots failed there. They go back to GitHub's runners.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 15:55:45 -04:00
bherbruckandClaude Opus 5.5 a228a5830e Release 0.16.0
Version 0.16.0; the pending design-format changes are folded into format 27.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 18:10:44 +00:00
bherbruckandClaude Opus 5.5 e4ff62c825 CI: run the triage and claim bots on the trusted light runner (#2655)
They check out main's own scripts, never pull request code, and were holding dozens of
GitHub-hosted runner slots that pull request builds need.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 13:10:23 -04:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Rec0iL deb28dd721 Agent chat: attached pictures use the shared viewer, in any format, decoded in the background (#2554)
Thanks @Rec0iL.
2026-10-18 13:07:55 -04:00
Victor Santos Oliveira c25e101b77 docs: align contribution guidance with current capabilities and CI (#2594)
Thanks @Vittuu.
2026-10-18 12:41:33 -04:00
Yuto Nakamura e766fb14fb Preserve warm assembly caches across Save As renames (#2120)
Thanks @yutyan0119.
2026-10-18 12:11:56 -04:00
DuBearte cac4bccea8 Orbit around the point under the cursor: over empty space, pivot about the view centre (#2138) (#2142)
Thanks @DuBearte.
2026-10-18 11:57:29 -04:00
Irakli Kourtis 3762e15cd5 CI: bot script changes run only the repository checks (#2444)
Thanks @jyviko.
2026-10-18 11:35:50 -04:00
Spencer Owen b1e5a5559e Offset Plane dialog opens at 0 mm (#2327) (#2338)
Thanks @spuder.
2026-10-18 11:35:35 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
JIJINBEI a0610a6329 refactor(ui): one function per motion dialog page (#2294)
Thanks @jijinbei.
2026-10-18 10:59:57 -04:00
n0tfr3shm1lk 2c877b9f9d sketch: live preview for fillet and chamfer corners (#2044)
Thanks @n0tfr3shm1lk.
2026-10-18 10:59:55 -04:00
Rec0iL f498d23a79 Agent chat: keep Send in view for a long message, open "View attached" (#2224) (#2225)
Thanks @Rec0iL.
2026-10-18 10:53:31 -04:00
Vodmordia 55bfeb71a7 Plastic dialogs: dimension fields show their units (#1936) (#2107)
Thanks @morelandjo.
2026-10-18 10:30:52 -04:00
Cyryl Sochacki 8025966a35 i18n: add Polish (pl) UI translation (#2032)
Thanks @cyryllo.
2026-10-18 10:24:13 -04:00
HiroKenEz 1ee6611403 A surface the GPU fails to reconfigure is logged and retried, not a crash (#1935) (#1966)
Thanks @HiroKenEz.
2026-10-18 10:02:02 -04:00
fugazister 535a43ab3c Custom colour themes: theme files, Gruvbox built in (#2255) (#2405)
Thanks @fugazister.
2026-10-18 10:01:39 -04:00
Martin Pålsson 2b8e85a7c6 Control server: make the timed-out request test deterministic (#2388) (#2391)
Thanks @martinpalsson.
2026-10-18 09:42:04 -04:00
CamWight b7a6c68702 Docs: a glossary of SolidCraft's terms (#1569) (#2484)
Thanks @CamWight.
2026-10-18 09:19:22 -04:00
rlartot 5ddb94b018 Preferences: picking a font no longer folds the window (#1800) (#2221)
Thanks @rlartot.
2026-10-18 09:12:37 -04:00
d2ccb576dd ci: draft pull requests run no CI until they're ready for review (#2517)
Drafts took runners while the queue held 100+ runs. `changes` and `checks` (which every other
job follows) and the final `ci` job now skip on a draft, and `ready_for_review` is a trigger,
so CI starts the moment a draft is marked ready, then on every push.


Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 09:08:36 -04:00
d818629f38 ci: build-jobs.sh never fails the job when memory can't be read (#2512)
On the self-hosted-fast runners /proc/meminfo isn't readable, so awk exited 2 and failed every
job the sizing step runs in (Doc tests on #2509 and #2510, on minisforum-fast-2 and -3) before
compiling anything. Sizing is an optimisation: without a readable memory figure (meminfo or a
numeric cgroup limit) the script now sets nothing and Cargo keeps its default. Also drops
`set -e`, so no other probe can fail the job.


Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 09:02:01 -04:00
HiroKenEz 7cf8c783e6 Rectangular Pattern: a drag arrow for Spacing 2 (#2462) (#2463)
Thanks @HiroKenEz.
2026-10-18 08:46:50 -04:00
github-actions[bot] 1c18161920 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-18 12:24:02 +00:00
franco michetti a4edea9ad2 Agent chat: attach files and pictures to a message (#1744)
Thanks @onembyte.
2026-10-18 08:18:29 -04:00
bherbruckandClaude Sonnet 5.5 4ebaca97e7 CI: run every robustness golden on pull requests that change geometry; spread fork PRs over both runner pools (#2492)
#2278 dropped the golden sample from pull requests, and two geometry PRs then
broke main together. Pull requests that touch the kernel, engine, doc, sketch
or geom crates now run every seed, split over the shards, with the command to
re-record in the failure output.

Fork PRs whose number ends in 7, 8 or 9 stay on the untrusted pool; the rest
build and test on GitHub's runners, which have free slots.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 08:11:58 -04:00
69b73af490 ci: size parallel compiles to the job's memory, not its CPUs (#2425)
Build tests on the untrusted runners (fork PRs, gVisor on shared boxes) fail intermittently with
rustc killed mid-crate ("exit status: 2", no diagnostic) on the biggest crates: solidcraft-engine,
ui-egui. Nothing limits Cargo's parallelism, so it starts one rustc per core the sandbox reports.
scripts/ci/build-jobs.sh sets CARGO_BUILD_JOBS from the memory available (and the cgroup limit,
where lower) at 3 GB per job, capped at nproc, and logs the numbers it saw.


Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 07:26:23 -04:00
H. Conrad 4e0601611c Fix id overflow (#1589)
Thanks @Ian-cmd-ops.
2026-10-18 06:53:57 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
franco michetti 5eb7640b54 Agent chat: pop out into its own window, dock back (#1745)
Thanks @onembyte.
2026-10-18 05:59:30 -04:00
003abc2149 Issue forms and needs-info: ask short bug reports for steps to reproduce (#2416)
* Triage bot: needs-info for short bug reports without steps

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TPWBBSRPfPYWgrrhbznewR

* Issue forms for bugs and feature requests; document needs-info

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TPWBBSRPfPYWgrrhbznewR

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 05:44:48 -04:00
136a3e9a2f Report an Issue: open issues on tangency-labs/solidcraft (#2417)
Claude-Session: https://claude.ai/code/session_01TPWBBSRPfPYWgrrhbznewR

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 05:44:23 -04:00