smlib tests: SMLib now drafts a cylinder side and offsets a closed sheet (develop's SMLib 90aabff, fixes #27 and #17)

The C++ kernel at develop's pin (9d0fb564) builds both cases that expected a refusal;
each now expects its closed form:

- offset_sheet_a_solid (tangency-labs/smlib#17): the 30 x 20 x 10 block, every face
  moved out d = 1, convex edges extended: (a + 2d)(b + 2d)(c + 2d) = 32 * 22 * 12 = 8448,
  bounds (-1, -1, -1) to (31, 21, 11), six planes.
- draft_a_curved_face (tangency-labs/smlib#27): the cylinder R = 5, h = 10 drafted
  0.1 rad about its base, leaning in, is the frustum of radii R and r = R - h tan 0.1:
  V = pi h (R^2 + R r + r^2) / 3 = 638.3350153968712 (a cone and two planes).

C++ meets both within the file's 1e-9 relative. The solidcore side of each is ignored:
core/offset.rs still makes the old capi's refusals (a closed solid in offset_sheet,
planes only in draft). With the offset_sheet refusal dropped, solidcore gives the
block exactly; solidcore has Cone::lean_cylinder (solidcore#1545) for the draft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
This commit is contained in:
Brett LawsonandClaude Opus 5.5 committed 2026-10-30 02:26:23 +01:00
1 parent 921381bcb8
commit eca7aec7ff
1 file changed
+23 -8
+23 -8
View File
@@ -97,6 +97,8 @@ enum Expect {
Volume(f64),
/// A solid of this volume whose bounds along z are these.
Slab(f64, f64, f64),
/// A solid of this volume (relative 1e-9) whose bounds are these.
Solid(f64, [f64; 3], [f64; 3]),
/// A sheet of this area (relative 1e-9) whose bounds are these.
Sheet(f64, [f64; 3], [f64; 3]),
/// This error.
@@ -154,7 +156,10 @@ fn case(name: &str) -> Case {
// The quarter cylinder moved 2 along its normal (outward: the arc's tangent swept along
// z): radius 7, area (π/2) 7 · 10.
"offset_sheet_quarter_cylinder" => c(Op::OffsetSheet(QUARTER, 2.0), Expect::Sheet(PI / 2.0 * 7.0 * 10.0, [0.0, 0.0, 0.0], [7.0, 7.0, 10.0])),
"offset_sheet_a_solid" => c(Op::OffsetSheet(BLOCK, 1.0), Expect::Fails(Error::Argument)),
// A closed sheet offsets as an open one (tangency-labs/smlib fix #17, develop 9d0fb564):
// each face moved out 1 along its normal, the convex edges extended, gives the block
// (a + 2d)(b + 2d)(c + 2d) of six planes, from -d to (a, b, c) + d.
"offset_sheet_a_solid" => c(Op::OffsetSheet(BLOCK, 1.0), Expect::Solid(32.0 * 22.0 * 12.0, [-1.0, -1.0, -1.0], [31.0, 21.0, 11.0])),
// The top moved out 2: abc + d·ab.
"offset_faces_top_out" => c(Op::OffsetFaces(BLOCK, vec![TOP], 2.0), Expect::Volume(ABC + 2.0 * 600.0)),
// The top moved in 10, as deep as the block: nothing left behind it.
@@ -188,11 +193,17 @@ fn case(name: &str) -> Case {
let s = (5.0f64).to_radians().tan();
c(Op::Draft(BLOCK, vec![FRONT], [0.0, 0.0, 10.0], Z, Z, 5f64.to_radians()), Expect::Volume(ABC + 30.0 * 100.0 * s / 2.0))
}
// A cylinder's side is not flat.
"draft_a_curved_face" => c(
Op::Draft(Shape::Cylinder([0.0; 3], 5.0, 10.0), vec![[5.0, 0.0, 5.0]], [0.0; 3], [0.0, 0.0, 1.0], [0.0, 0.0, 1.0], 0.1),
Expect::Fails(Error::Unsupported),
),
// A cylinder along the pull drafts to a cone (tangency-labs/smlib fix #27, develop
// 9d0fb564): R = 5, h = 10, θ = 0.1 about the bottom, leaning in: a frustum of radii R
// and r = R - h tanθ (a cone and its two caps): V = π h (R² + R r + r²) / 3.
"draft_a_curved_face" => {
let (big, h) = (5.0, 10.0);
let small = big - h * 0.1f64.tan();
c(
Op::Draft(Shape::Cylinder([0.0; 3], big, h), vec![[5.0, 0.0, 5.0]], [0.0; 3], [0.0, 0.0, 1.0], [0.0, 0.0, 1.0], 0.1),
Expect::Volume(PI * h * (big * big + big * small + small * small) / 3.0),
)
}
// The top is square to the pull, not along it.
"draft_a_face_across_the_pull" => {
c(Op::Draft(BLOCK, vec![TOP], [0.0; 3], [0.0, 0.0, 1.0], [0.0, 0.0, 1.0], 0.1), Expect::Fails(Error::Unsupported))
@@ -277,6 +288,10 @@ fn judge(name: &str, who: &str, expect: &Expect, got: Got) -> Got {
let (a, b) = (m.bounds.0[2], m.bounds.1[2]);
assert!((a - lo).abs() < 1e-6 && (b - hi).abs() < 1e-6, "{name}: {who} z from {a} to {b}, expected {lo} to {hi}");
}
(Expect::Solid(v, lo, hi), Ok(m)) => {
assert!(rel(m.size, *v) < 1e-9, "{name}: {who} volume {} vs analytic {v}", m.size);
assert!(near(m.bounds.0, *lo) && near(m.bounds.1, *hi), "{name}: {who} bounds {:?}, expected {lo:?} {hi:?}", m.bounds);
}
(Expect::Sheet(s, lo, hi), Ok(m)) => {
assert!(rel(m.size, *s) < 1e-9, "{name}: {who} area {} vs analytic {s}", m.size);
assert!(near(m.bounds.0, *lo) && near(m.bounds.1, *hi), "{name}: {who} bounds {:?}, expected {lo:?} {hi:?}", m.bounds);
@@ -410,14 +425,14 @@ cases!(
thicken_a_solid,
offset_sheet_plate,
offset_sheet_quarter_cylinder: ignore = "solidcore#1441: an offset surface does not export, no SmSurface::ApproximateSurface (solidcore#1441)",
offset_sheet_a_solid,
offset_sheet_a_solid: ignore = "the port lags tangency-labs/smlib#17: core/offset.rs still refuses a closed solid (solidcore offsets it exactly once it does not)",
offset_faces_top_out: ignore = "no SmOffsetFacesExecutive, fork a96ce9f (solidcore#1060)",
offset_faces_through,
draft_box_sides,
draft_one_side,
draft_one_side_out,
draft_one_side_hinged_at_the_top,
draft_a_curved_face,
draft_a_curved_face: ignore = "the port lags tangency-labs/smlib#27: core/offset.rs drafts planes only (solidcore has Cone::lean_cylinder, solidcore#1545)",
draft_a_face_across_the_pull,
);