Wave 254/509: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013 (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. -b310512e9jyviko: kernel-ladder: tier 11 threaded parts grade their geometry -f6b42d416jyviko: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013 -fb384be9cjyviko: smlib: build against SMLib a15b5a2 (replay of usd-brep 1.0.1 with the fork's fixes) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
1 parent
90ef5af541
commit
9ae514b41f
9 files changed
+136
-20
No files matched your search
@@ -1 +1 @@
|
||||
f06b48a8da20ee659679e9622f73a42b1a7ab3a8
|
||||
a15b5a2885384a9d10e76a68ba8b79526faccb09
|
||||
@@ -21,6 +21,6 @@
|
||||
]
|
||||
},
|
||||
"tolerance": {
|
||||
"rel": 0.001192
|
||||
"rel": 0.00119391703234033
|
||||
}
|
||||
}
|
||||
+3
-3
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"sources": [],
|
||||
"what": "rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them",
|
||||
"what": "rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist",
|
||||
"source": "invariants",
|
||||
"method": "three unequal radii at one corner, one after another; the vertical edge stays sharp below the two top rounds (x=60, y=40, z from 0 to 15), so it can be picked at z=8; one valid body",
|
||||
"body_count": 1
|
||||
"method": "the r7 runs on (tangent chain) up the side x=60 along its arc on the r5 round, a circle of radius 5 about the r5 axis: the r7's contact line on that face would be the arc offset 7 towards its centre, radius 5 - 7 < 0, so the blend passes through itself; and along the seam of the r5 and r3 rounds no ball over r3 fits the r3 round. No such round exists, so the right answer is a clean refusal (SMLib: no room for the rolling ball). 018 is the same corner with a radius that fits.",
|
||||
"outcome": "refused"
|
||||
}
|
||||
+20
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"sources": [],
|
||||
"what": "rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner",
|
||||
"source": "invariants",
|
||||
"method": "as 016 with a radius that fits (r < 3, the smaller top round): the r2 runs up the vertical edge and on along the side's arc on the r5 round and the seam between the two rounds, tapering to a point where they become tangent. Faces: the box's 6 and the two top rounds, + 3 for the r2 (along the vertical edge, up the arc, along the seam); one valid body inside the box",
|
||||
"body_count": 1,
|
||||
"faces": 11,
|
||||
"bbox": {
|
||||
"min": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"max": [
|
||||
60,
|
||||
40,
|
||||
20
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,45 @@
|
||||
{
|
||||
"base": "../../01-primitives/001-box",
|
||||
"commands": [
|
||||
{
|
||||
"command": "solid.fillet",
|
||||
"params": {
|
||||
"edges": [
|
||||
[
|
||||
30,
|
||||
40,
|
||||
20
|
||||
]
|
||||
],
|
||||
"radius": 5
|
||||
}
|
||||
},
|
||||
{
|
||||
"command": "solid.fillet",
|
||||
"params": {
|
||||
"edges": [
|
||||
[
|
||||
60,
|
||||
20,
|
||||
20
|
||||
]
|
||||
],
|
||||
"radius": 3,
|
||||
"tangent_chain": false
|
||||
}
|
||||
},
|
||||
{
|
||||
"command": "solid.fillet",
|
||||
"params": {
|
||||
"edges": [
|
||||
[
|
||||
60,
|
||||
40,
|
||||
8
|
||||
]
|
||||
],
|
||||
"radius": 2
|
||||
}
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,23 @@
|
||||
{
|
||||
"sources": [],
|
||||
"what": "the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk",
|
||||
"source": "invariants",
|
||||
"method": "a thread meeting a round and a chamfer, tapped holes; one valid body",
|
||||
"body_count": 1
|
||||
"source": "analytic",
|
||||
"method": "the hub's cylinder (r15) runs from the r3 round at its root (z 13) to the 1.5 chamfer at its top (z 28.5): the M30 groove (P 3.5) stops w = 1.632286 clear of the round, a shoulder (06/007's rule), and runs out through the chamfer, a free end (06/006's): it removes the stock less 2 pi int int r m(r) dr dz over z 13 + w..28.5 at r 15 and the chamfer (r 15 - (z - 28.5)); the bore r8 is inside the root r 13.1. The M8 tap drills (6.75) go through the 10 mm disk at r 28, 90 deg + k 120, clear of the bolt holes (30 deg apart): 3 pi 3.375^2 10. Bbox: the flange's",
|
||||
"body_count": 1,
|
||||
"volume_mm3": 52978.060766654,
|
||||
"bbox": {
|
||||
"min": [
|
||||
-40,
|
||||
-40,
|
||||
0
|
||||
],
|
||||
"max": [
|
||||
40,
|
||||
40,
|
||||
30
|
||||
]
|
||||
},
|
||||
"tolerance": {
|
||||
"rel": 0.0001
|
||||
}
|
||||
}
|
||||
@@ -1,7 +1,23 @@
|
||||
{
|
||||
"sources": [],
|
||||
"what": "the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss",
|
||||
"source": "invariants",
|
||||
"method": "the last case carries every tier; one valid body",
|
||||
"body_count": 1
|
||||
"source": "analytic",
|
||||
"method": "10/008 less the M16 groove on the boss: its cylinder runs from the r1 root round (z 21, a shoulder: the groove stops w = 0.932735 clear of it) to the 1 mm top chamfer (z 29, run out through it, a free end); the groove's root r 6.917 stays outside the boss's 1.5 wall's inside (r 6.5), so it cuts the wall only. Bbox: the part's",
|
||||
"body_count": 1,
|
||||
"volume_mm3": 15138.532607554,
|
||||
"bbox": {
|
||||
"min": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"max": [
|
||||
60,
|
||||
40,
|
||||
35
|
||||
]
|
||||
},
|
||||
"tolerance": {
|
||||
"rel": 0.0001
|
||||
}
|
||||
}
|
||||
@@ -139,7 +139,8 @@
|
||||
"ladder/07-fillets/014-curved-edge-r2",
|
||||
"ladder/07-fillets/003-tangent-chain-r3",
|
||||
"ladder/07-fillets/017-part-rounds",
|
||||
"ladder/07-fillets/013-corner-setback"
|
||||
"ladder/07-fillets/013-corner-setback",
|
||||
"ladder/07-fillets/018-corner-three-sequential-r5-r3-r2"
|
||||
],
|
||||
"tier": "07-fillets",
|
||||
"what": "constant, variable and corner fillets"
|
||||
|
||||
@@ -813,9 +813,12 @@ case(T7, "010-corner-unequal-r7-r3", "an r7 vertical round at a corner, then r3
|
||||
"r7 arc's top edge as a torus quarter: Pappus, the section (1-pi/4) 3^2 with its centroid 3 (10-3pi)/(12-3pi) in from the wall, at radius 7 - that, over pi/2 (as 003). "
|
||||
"Faces: 6 planes + the r7 cylinder + the r3 chain's cylinder, torus, cylinder; edges: 5 round the bottom, 5 round the top, 5 vertical (two r7 tangent lines, the box's "
|
||||
"three other verticals), the chain's three on the walls and two end arcs, its two seams; vertices from Euler (V - E + F = 2): 14", base=B1)
|
||||
case(T7, "016-corner-three-sequential-r5-r3-r7", "rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them",
|
||||
[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 7)], {"body_count": 1},
|
||||
"three unequal radii at one corner, one after another; the vertical edge stays sharp below the two top rounds (x=60, y=40, z from 0 to 15), so it can be picked at z=8; one valid body", base=B1, source="invariants")
|
||||
case(T7, "016-corner-three-sequential-r5-r3-r7", 'rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist',
|
||||
[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 7)], {"outcome": "refused"},
|
||||
"the r7 runs on (tangent chain) up the side x=60 along its arc on the r5 round, a circle of radius 5 about the r5 axis: the r7's contact line on that face would be the arc offset 7 towards its centre, radius 5 - 7 < 0, so the blend passes through itself; and along the seam of the r5 and r3 rounds no ball over r3 fits the r3 round. No such round exists, so the right answer is a clean refusal (SMLib: no room for the rolling ball). 018 is the same corner with a radius that fits.", base=B1, source="invariants")
|
||||
case(T7, "018-corner-three-sequential-r5-r3-r2", 'rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner',
|
||||
[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 2)], {"body_count": 1, "faces": 11, "bbox": BBOX},
|
||||
"as 016 with a radius that fits (r < 3, the smaller top round): the r2 runs up the vertical edge and on along the side's arc on the r5 round and the seam between the two rounds, tapering to a point where they become tangent. Faces: the box's 6 and the two top rounds, + 3 for the r2 (along the vertical edge, up the arc, along the seam); one valid body inside the box", base=B1, source="invariants")
|
||||
case(T7, "011-chain-ending-at-corner", "r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp",
|
||||
[F([corner[0], corner[1]], 5)],
|
||||
{"body_count": 1, "volume_mm3": VB - SPANDREL * 25 * 100 + 125 * (5 / 3 - PI / 2), "faces": 8, "edges": 17, "vertices": 11, "bbox": BBOX, "tolerance": {"rel": 1e-5}},
|
||||
@@ -847,8 +850,14 @@ case(T7, "012-variable-into-rounded-corner", "a vertical r5 round, then a variab
|
||||
"cylinder: as a constant r5 tube that takes int_0^5 sqrt(25 - v^2)(5 - sqrt(25 - v^2)) dv = 125 pi/4 - 250/3 = %.6f; with its radius still growing at 4/55 per mm, %.6f "
|
||||
"(numerical, the round's section against the cylinder). V lies between: graded as the interval's middle with its half width as the tolerance. Faces 6 + 2; edges 18, "
|
||||
"vertices 12 (5 round the bottom, 5 vertical, 5 round the top face, the round's line on the back wall, its end arc on x = 0, its trim on the cylinder)" % (ext_const, ext_grow), base=B1)
|
||||
missing(T7, "013-corner-setback", "three r5 rounds at a corner with setbacks of 8 mm along each edge", "solid.fillet has no corner setback distances",
|
||||
"the setback corner patch would be graded by invariants")
|
||||
# 013: convex, so in the corner cube C (side 8) it lies between the hull of its sections on C's faces and the rounds' prisms.
|
||||
v13out = VB - SPANDREL * 25 * (60 + 40 + 20 - 15) - 125 * (1 - PI / 6) - (512 - 225 * SPANDREL - 125 * (1 - PI / 6))
|
||||
v13lo, v13hi = v13out + 299.0201, v13out + 512 - 225 * SPANDREL - 125 * (math.sqrt(2) - 1)
|
||||
case(T7, "013-corner-setback", 'three r5 rounds at the corner (60,40,20) with setbacks of 8 mm along each edge',
|
||||
[F(corner, 5, setbacks=[{"vertex": [60, 40, 20], "distance": 8}])],
|
||||
{"body_count": 1, "volume_mm3": (v13lo + v13hi) / 2, "faces": 15, "edges": 36, "vertices": 23, "bbox": BBOX,
|
||||
"tolerance": {"rel": (v13hi - v13lo) / (v13hi + v13lo) + 1e-6}},
|
||||
"outside the corner cube C = [52,60]x[32,40]x[12,20] the body is the sphere corner's (009: V0 = 47377.120025868, of which 512 - 225 (1-pi/4) - 125 (1-pi/6) lies in C); the body is convex, so in C it holds the hull of its points on C's faces (the rounds' sections at the setback planes x=52, y=32, z=12 and the cube's corners outside the patch: 299.0201 by a hull of the sections sampled, below the true hull) and lies within the planes tangent to it along those sections, the three rounds' prisms (512 - 225 (1-pi/4) - 125 (sqrt2-1): the corner cube of r keeps the cylinders' common octant (2-sqrt2) r^3). The volume is the middle of [47271.9757, 47384.8935] with that half width as its tolerance. The box is unchanged. SMLib's setback patch is two quadrilaterals per side meeting at its centre: 6 box faces, 3 rounds, 6 patch pieces; vertices: 4 untouched box corners, 2 at each round's far end, the 6 section ends (where the patch starts, 8 from the vertex along each edge), the 6 side middles and the centre (23); edges by Euler, 23 + 15 - 2", base=B1, source="invariants")
|
||||
case(T7, "014-curved-edge-r2", "an r2 round on the top edge of a cylinder r10 h20",
|
||||
[cyl([0, 0, 0], 10, 20, body_name="Part"), F([[10, 0, 20]], 2)],
|
||||
{"body_count": 1, "volume_mm3": PI * 100 * 20 - SPANDREL * 4 * 2 * PI * (10 - XBAR * 2), "faces": 4},
|
||||
@@ -1090,12 +1099,21 @@ FL = sketch(vplane([0, 0, 0]), line([[8, 0], [40, 0], [40, 10], [15, 10], [15, 3
|
||||
case(T11, "002-flange", "a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round", FL,
|
||||
{"body_count": 1, "volume_mm3": Vf, "faces": 14},
|
||||
"pi((40^2-8^2)10 + (15^2-8^2)20) - 6 pi 4^2 10 - 1.125 * 2 pi 14.5 (chamfer, Pappus) + (1-pi/4) 9 * 2 pi (15 + 3(10-3pi)/(12-3pi)) (concave round)")
|
||||
w30 = ext_half_width(30, 3.5)
|
||||
case(T11, "003-threaded-flange", "the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk",
|
||||
[thr([15, 0, 20], designation="M30"), H(position=[0, 28, 10], thread="M8", name="Tap"), C("solid.pattern.circular", features=["Tap"], axis="Z", count=3)],
|
||||
{"body_count": 1}, "a thread meeting a round and a chamfer, tapped holes; one valid body", base=up(T11, "002-flange"), source="invariants")
|
||||
{"body_count": 1, "volume_mm3": Vf - groove(30, 3.5, [(13 + w30, 28.5, lambda z: 15), (28.5, 30, lambda z: 15 - (z - 28.5))]) - 3 * PI * 3.375 ** 2 * 10,
|
||||
"bbox": {"min": [-40, -40, 0], "max": [40, 40, 30]}, "tolerance": {"rel": 1e-4}},
|
||||
"the hub's cylinder (r15) runs from the r3 round at its root (z 13) to the 1.5 chamfer at its top (z 28.5): the M30 groove (P 3.5) stops w = %.6f clear of the round, "
|
||||
"a shoulder (06/007's rule), and runs out through the chamfer, a free end (06/006's): it removes the stock less 2 pi int int r m(r) dr dz over z 13 + w..28.5 at r 15 and the chamfer "
|
||||
"(r 15 - (z - 28.5)); the bore r8 is inside the root r 13.1. The M8 tap drills (6.75) go through the 10 mm disk at r 28, 90 deg + k 120, clear of the bolt holes (30 deg apart): "
|
||||
"3 pi 3.375^2 10. Bbox: the flange's" % w30, base=up(T11, "002-flange"))
|
||||
case(T11, "004-housing", "the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss",
|
||||
[thr([23, 15, 25], designation="M16")], {"body_count": 1},
|
||||
"the last case carries every tier; one valid body", base=C10, source="invariants")
|
||||
[thr([23, 15, 25], designation="M16")],
|
||||
{"body_count": 1, "volume_mm3": V9 - 4 * PI * 1.5 ** 2 * 1.5 - groove(16, 2, [(21 + w16, 29, lambda z: 8), (29, 30, lambda z: 8 - (z - 29))]),
|
||||
"bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}, "tolerance": {"rel": 1e-4}},
|
||||
"10/008 less the M16 groove on the boss: its cylinder runs from the r1 root round (z 21, a shoulder: the groove stops w = %.6f clear of it) to the 1 mm top chamfer "
|
||||
"(z 29, run out through it, a free end); the groove's root r 6.917 stays outside the boss's 1.5 wall's inside (r 6.5), so it cuts the wall only. Bbox: the part's" % w16, base=C10)
|
||||
|
||||
# manifest: tiers in order, cases in authoring order until --record sorts them by time
|
||||
WHAT = {
|
||||
|
||||
Reference in new issue
Block a user