Wave 389/509: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?} (and 3 more)

4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 6af622978 jyviko: Threads: a taper thread's groove follows its crest cone across the section, so no sliver of the flanks is left
- 3f5efdf70 jyviko: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?}
- dc093b0cb jyviko: Kernel rig: a symmetric surface extrude with no convention is the total distance (#9091); the per-side reading is its own case
- 55338e139 jyviko: Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
jyvikoandClaude Opus 5.5 committed 2026-10-29 19:11:21 -04:00
1 parent 98ec65d94d
commit 2b2229ab31
33 files changed
+264 -304

No files matched your search

+40 -22
View File
@@ -461,21 +461,44 @@ fn thread_grooves(
format!("this {shown} mm shaft is too thin for a modelled {m} thread: {cut}; make the shaft {} mm for {m}{alt}", show_mm(d))
}));
}
// The section's radial span: from the root out past the surface (external), or from inside
// the hole wall out to the root (internal), so the cut leaves no skin.
// The section: from the root out past the surface (external), or from inside the hole wall
// out to the root (internal), so the cut leaves no skin, its flanks the groove's.
// A taper thread's crests are cut by its major cone (external) or minor cone (internal),
// as the die or tap cuts them ([`taper_envelope`]): its groove reaches just past the crest,
// by as much as narrows the tooth's crest flat by a quarter (NPT's flat is 0.038 P).
let past = |g: &crate::thread_forms::GrooveProfile| 0.25 * g.crest_flat / (g.flank_lo.tan() + g.flank_hi.tan());
let span = |g: &crate::thread_forms::GrooveProfile| match (taper.is_some(), t.internal) {
(true, true) => (g.crest_r - past(g), g.root_r),
(true, false) => (g.root_r, g.crest_r + past(g)),
(false, true) => (radius.min(g.crest_r) - 0.1 * p, g.root_r),
(false, false) => (g.root_r, radius.max(d / 2.0) + 0.05 * p),
// as the die or tap cuts them ([`taper_envelope`]): its groove reaches past the crest by as
// much as narrows the tooth's crest flat by a quarter (NPT's flat is 0.038 P). The cone
// changes 1 in 32 along the axis (`major_at`) across the section's own width, so its edge
// there follows the cone at that margin rather than being cut square: square, its deeper
// corner stops short of the cone and leaves a sliver of each flank.
let cone = taper.map_or(0.0, |_| (major_at(t.start + 1.0) - major_at(t.start)) / 2.0);
let section_of = |g: &crate::thread_forms::GrooveProfile| -> (Vec<Vec2>, f64) {
let (tl, th) = (g.flank_lo.tan(), g.flank_hi.tan());
if taper.is_none() {
let (r0, r1) = if t.internal {
(radius.min(g.crest_r) - 0.1 * p, g.root_r)
} else {
(g.root_r, radius.max(d / 2.0) + 0.05 * p)
};
let ((lo0, hi0), (lo1, hi1)) = (g.extents(p, r0), g.extents(p, r1));
let wide = g.width(p, if t.internal { r0 } else { r1 });
return (vec![Vec2::new(r0, -lo0), Vec2::new(r1, -lo1), Vec2::new(r1, hi1), Vec2::new(r0, hi0)], wide);
}
// Depth from the root, out towards the crest: d(z) = dc + q·z along the edge, which
// meets the flanks z = −(h + d·tl) and z = h + d·th.
let o = if t.internal { -1.0 } else { 1.0 };
let q = o * cone;
let h = g.width(p, g.root_r) / 2.0;
let dc = o * (g.crest_r - g.root_r) + 0.25 * g.crest_flat / (tl + th);
let (z_lo, z_hi) = (-(h + dc * tl) / (1.0 + q * tl), (h + dc * th) / (1.0 - q * th));
let r = |z: f64| g.root_r + o * (dc + q * z);
let (root, edge) = ([Vec2::new(g.root_r, -h), Vec2::new(g.root_r, h)], [Vec2::new(r(z_lo), z_lo), Vec2::new(r(z_hi), z_hi)]);
// In the order the square section has: the inner radius's corners first.
let pts = if t.internal { vec![edge[0], root[0], root[1], edge[1]] } else { vec![root[0], edge[0], edge[1], root[1]] };
(pts, z_hi - z_lo)
};
let (r0, r1) = span(&g);
let wide = if t.internal { r0 } else { r1 };
if g.width(p, wide) >= p * 0.98 {
let (mut section, wide) = section_of(&g);
let radii = |s: &[Vec2]| s.iter().fold((f64::INFINITY, f64::NEG_INFINITY), |(a, b), v| (a.min(v.x), b.max(v.x)));
let (r0, r1) = radii(&section);
if wide >= p * 0.98 {
// The groove would be wider than a pitch: the face is far inside the thread (a hole
// narrower than its minor diameter, a shaft thicker than its major one, #2688).
let (m, dia) = (&t.designation, 2.0 * radius);
@@ -488,9 +511,6 @@ fn thread_grooves(
format!("this {shown} mm shaft is too thick for a modelled {m} thread; make the shaft {} mm for {m}{alt}", show_mm(d))
}));
}
let (lo0, hi0) = g.extents(p, r0);
let (lo1, hi1) = g.extents(p, r1);
let mut section = vec![Vec2::new(r0, -lo0), Vec2::new(r1, -lo1), Vec2::new(r1, hi1), Vec2::new(r0, hi0)];
if !(r0.is_finite() && r1.is_finite() && r0 > 0.0) {
return Err(DocError::Invalid("thread dimensions are out of range".into()));
}
@@ -503,7 +523,8 @@ fn thread_grooves(
// the material (an external thread's away from the axis, past the surface; an internal
// one's towards it, into the hole) as it turns. It lies past the full-form length, up to the
// shoulder's clearance; at a free end, inside the face, the groove reaching nothing there.
let (w_lo, w_hi) = (lo0.max(lo1), hi0.max(hi1));
// How far the section reaches each way along the axis.
let (w_lo, w_hi) = section.iter().fold((0.0_f64, 0.0_f64), |(a, b), v| (a.max(-v.y), b.max(v.y)));
let s0 = match (ends[0], ease[0] > 0.0) {
(End::Free, false) => t.start - p,
(End::Free, true) => t.start,
@@ -528,11 +549,8 @@ fn thread_grooves(
let mut r0 = r0;
let taper_rate = match taper {
Some(_) => {
let gb = profile(major_at(s0));
let (a, b) = span(&gb);
let ((l0, h0), (l1, h1)) = (gb.extents(p, a), gb.extents(p, b));
section = vec![Vec2::new(a, -l0), Vec2::new(b, -l1), Vec2::new(b, h1), Vec2::new(a, h0)];
r0 = a;
section = section_of(&profile(major_at(s0))).0;
r0 = radii(&section).0;
(major_at(s0 + lead) - major_at(s0)) / 2.0
}
None => 0.0,
-116
View File
@@ -39,7 +39,6 @@ component.rename a component name
component.replace_with_link component links
component.unlock component locking
component.update_links component links
contact.list a listing of contact sets
diagnostics.crash_report crash reports
diagnostics.crash_reports crash reports
diagnostics.crash_reports.clear crash reports
@@ -59,10 +58,8 @@ edit.restore_checkpoint undo, redo and checkpoints: an earlier state r
edit.undo undo, redo and checkpoints: an earlier state restored, no new geometry
engine.commands the command registry itself
engine.describe the command registry itself
explode.create exploded views: display offsets
explode.delete exploded views: display offsets
explode.list exploded views: display offsets
explode.show exploded views: display offsets
expr.evaluate expression evaluation
file.open_in_easyprint hands the file to another program
file.save saving the design
@@ -78,7 +75,6 @@ inspect.curvature_map display analysis: shading
inspect.environment_map display analysis: shading
inspect.silhouette display analysis: outline
inspect.zebra display analysis: shading
joint.list a listing of joints
library.apply material and appearance libraries
library.export material and appearance libraries
library.inspect material and appearance libraries
@@ -97,8 +93,6 @@ motion.delete removes a motion study
motion.export writes a study's results to a file
motion.export_animation writes an animation
motion.list a listing of motion studies
motion.play plays a study in the view
occurrence.properties occurrence properties
parameters.comment parameter bookkeeping; a value change that rebuilds is parameters.change, which cases use
parameters.complete parameter bookkeeping; a value change that rebuilds is parameters.change, which cases use
parameters.delete parameter bookkeeping; a value change that rebuilds is parameters.change, which cases use
@@ -111,7 +105,6 @@ parameters.move parameter bookkeeping; a value change that reb
parameters.rename parameter bookkeeping; a value change that rebuilds is parameters.change, which cases use
parameters.users parameter bookkeeping; a value change that rebuilds is parameters.change, which cases use
parts.library a listing of the parts library
plastic.rules a listing of plastic rules
render.aging.describe rendering: images, cameras, stages
render.backends rendering: images, cameras, stages
render.camera.fit rendering: images, cameras, stages
@@ -265,97 +258,17 @@ view.visual_style the view: camera, layout, display
# that a case uses), and a new geometry command gets a case, not a line here.
[to cover]
body.repair repair: the solid a refused or open part becomes
component.copy_bodies assemblies: bodies copied into a component
component.extract assemblies: bodies extracted to a design
component.from_bodies assemblies: a component made from bodies
component.insert_design assemblies: a design inserted
component.move_bodies assemblies: bodies moved between components
component.move_sketches assemblies: sketches moved between components
component.paste_new assemblies: a pasted new component
component.revert_position assemblies: a placement reverted
config.activate configurations: a configured part rebuilt per row
config.column configurations: a configured part rebuilt per row
config.configure configurations: a configured part rebuilt per row
config.preview configurations: a configured part rebuilt per row
config.row configurations: a configured part rebuilt per row
config.rule configurations: a configured part rebuilt per row
config.rules configurations: a configured part rebuilt per row
config.table configurations: a configured part rebuilt per row
construct.axis.edge construction: the plane, axis or point exactly
construct.axis.normal_to_face construction: the plane, axis or point exactly
construct.axis.through_cylinder construction: the plane, axis or point exactly
construct.axis.two_planes construction: the plane, axis or point exactly
construct.plane.at_angle construction: the plane, axis or point exactly
construct.plane.midplane construction: the plane, axis or point exactly
construct.plane.perpendicular construction: the plane, axis or point exactly
construct.plane.tangent construction: the plane, axis or point exactly
construct.plane.three_points construction: the plane, axis or point exactly
construct.plane.two_edges construction: the plane, axis or point exactly
construct.point.along_path construction: the plane, axis or point exactly
construct.point.center construction: the plane, axis or point exactly
construct.point.edge_plane construction: the plane, axis or point exactly
construct.point.three_planes construction: the plane, axis or point exactly
construct.point.two_edges construction: the plane, axis or point exactly
construct.point.vertex construction: the plane, axis or point exactly
contact.check assemblies: contact sets and what they report
contact.create assemblies: contact sets and what they report
contact.disable_all assemblies: contact sets and what they report
contact.edit assemblies: contact sets and what they report
contact.enable_all assemblies: contact sets and what they report
contact.enable_sets assemblies: contact sets and what they report
file.export_view_dxf drawings: the projection of the model a view DXF holds
frame.member frames: member bodies
frame.profile.insert frames: member bodies
inspect.center_of_mass inspect: the number or curves it reports
inspect.clearance inspect: the number or curves it reports
inspect.compare inspect: the number or curves it reports
inspect.continuity inspect: the number or curves it reports
inspect.curvature_comb inspect: the number or curves it reports
inspect.draft inspect: the number or curves it reports
inspect.interference inspect: the number or curves it reports
inspect.isocurve inspect: the number or curves it reports
inspect.minimum_radius inspect: the number or curves it reports
inspect.parameter_sweep inspect: results rebuilt over a parameter range
inspect.section inspect: the number or curves it reports
joint.as_built assemblies: joint placements and values
joint.cam assemblies: joint placements and values
joint.create assemblies: joint placements and values
joint.delete assemblies: joint placements and values
joint.drive assemblies: joint placements and values
joint.edit assemblies: joint placements and values
joint.gear assemblies: joint placements and values
joint.inspect assemblies: joint placements and values
joint.limits assemblies: joint placements and values
joint.motion_link assemblies: joint placements and values
joint.origin assemblies: joint placements and values
joint.rack_pinion assemblies: joint placements and values
joint.reach assemblies: joint placements and values
joint.rigid_group assemblies: joint placements and values
joint.screw assemblies: joint placements and values
joint.solve assemblies: joint placements and values
joint.sweep assemblies: joint placements and values
motion.interference assemblies: motion results
motion.plot assemblies: motion results
motion.study assemblies: motion results
motion.trace assemblies: motion results
motion.trace.edit assemblies: motion results
motion.trace.keep assemblies: motion results
occurrence.copy assemblies: an occurrence copied
occurrence.drag assemblies: an occurrence dragged to a placement
occurrence.reparent assemblies: an occurrence moved in the tree
parts.fastener standard parts: a fastener body
parts.insert standard parts: a part body
parts.resize standard parts: a part resized
plastic.assign_rule plastic: the feature body
plastic.boss plastic: the feature body
plastic.lip plastic: the feature body
plastic.manage_rules plastic: rules that rebuild the features using them
plastic.rest plastic: the feature body
sheet.export_bend_table sheet metal: the bend table of a flat pattern
sheet.export_dxf sheet metal: the flat pattern as DXF
sheet.hem sheet metal: the feature body
sheet.path_flange sheet metal: the feature body
sheet.perforate sheet metal: the feature body
sketch.arc3d sketch: a curve kind no case profiles yet
sketch.auto_project sketch from the model: curves the kernel computes from bodies
sketch.conic sketch: a curve kind no case profiles yet
@@ -364,36 +277,7 @@ sketch.include_3d sketch from the model: curves the kernel compu
sketch.intersect sketch from the model: curves the kernel computes from bodies
sketch.intersection_curve sketch from the model: curves the kernel computes from bodies
sketch.isoparametric_curve sketch from the model: curves the kernel computes from bodies
sketch.project sketch from the model: curves the kernel computes from bodies
sketch.project_to_surface sketch from the model: curves the kernel computes from bodies
sketch.spline.control_point_5 sketch: a curve kind no case profiles yet
sketch.spline3d sketch: a curve kind no case profiles yet
sketch.spun_profile sketch from the model: curves the kernel computes from bodies
solid.align solid modelling: the body it makes
solid.boundary_fill solid modelling: the body it makes
solid.bounding_solid solid modelling: the body it makes
solid.cone solid modelling: the body it makes
solid.pattern.path solid modelling: the body it makes
solid.replace_face solid modelling: the body it makes
solid.scale solid modelling: the body it makes
solid.web solid modelling: the body it makes
surface.blend surfaces: the surface body it makes
surface.boundary surfaces: the surface body it makes
surface.fair surfaces: the surface body it makes
surface.match surfaces: the surface body it makes
surface.offset surfaces: the surface body it makes
surface.reverse_normal surfaces: the surface body it makes
surface.ruled surfaces: the surface body it makes
surface.unstitch surfaces: the surface body it makes
surface.untrim surfaces: the surface body it makes
timeline.compute_all timeline: the bodies after the rebuild
timeline.delete timeline: the bodies after the rebuild
timeline.edit timeline: the bodies after the rebuild
timeline.group timeline: the bodies after the rebuild
timeline.move_many timeline: the bodies after the rebuild
timeline.move_to_group timeline: the bodies after the rebuild
timeline.reorder timeline: the bodies after the rebuild
timeline.reorder_many timeline: the bodies after the rebuild
timeline.roll_to timeline: the bodies after the rebuild
timeline.suppress timeline: the bodies after the rebuild
timeline.ungroup timeline: the bodies after the rebuild
+1 -2
View File
@@ -110,9 +110,8 @@ the frozen truck-geometry PRs, a `kernel-paused` PR), for the report's coverage
| `timeout_s` | A longer timeout for this case than the run's (at most 1800 s), for cases that are slow by nature. A case that only needs it on a loaded machine shouldn't set it. |
| `tolerance` | Optional overrides: `rel`, `abs_mm`, `mesh_mm`, `weld_mm`. |
| `files` | The files the case wrote to `$OUT`, each `{path, json \| csv \| dxf}`, matched as a part of what is there: every key the case gives, an array item by item and as long, a whole number exactly, any other number within `rel`. `json`: the file's JSON; `csv`: its rows, as objects keyed by the header row; `dxf`: per layer of its ENTITIES section, how many of each entity (`{"CUT": {"CIRCLE": 1, "ELLIPSE": 0, "length_mm": 31.416}}`; a count may be a range `[min, max]`) and `length_mm`, the total length of its lines, arcs, circles, ellipses and polylines. |
| `results` | The commands' own answers, each `{step, json}`: the answer of the `step`th command (from 1) matched as `files` matches JSON (a flat pattern's bends, a rule's values). |
| `results` | The commands' own answers, each `{step, pointer?, json, rel?, abs_mm?}`: the answer of the `step`th command (from 1, base commands included), or its part at the JSON `pointer` (RFC 6901), matched as `files` matches JSON: a whole number exactly (a count), another within `rel` (the case's relative tolerance unless given) or `abs_mm`, lists item by item. |
| `construction` | `{name: spec}`, a spec being `{point: [x,y,z]}`, `{axis: {through, dir}}` or `{plane: {through, normal}}`: each named construction point, axis or plane as the timeline evaluated it. A point within the position tolerance (`tolerance.abs_mm`, else 1e-3 of the box diagonal, of 1 mm where there is no body); an axis whose direction is parallel to `dir` (either way, sine of the angle at most 1e-6) and whose line passes within it of `through`; a plane likewise with `normal`. An axis or plane is graded as the line or plane it is, not by the origin it keeps. |
| `results` | `[{command, pointer, value, rel?, abs_mm?}]`: values in the commands' own replies (an inspect command's numbers). The reply of the script's `command`-th command (from 0, base commands included), at the JSON `pointer`, is `value`: a number within the relative tolerance, `[x, y, z]` within the position tolerance, anything else (a string, a bool, null, a list) equal. |
| `missing` | A capability SolidCraft has no command or parameter for yet (`"solid.thread has no start count"`): the case is reported **not supported yet** without running, so the gap stays visible. |
## The kernel rig gate
-1
View File
@@ -1,7 +1,6 @@
# Source files whose change must rerun the construction area: one git pathspec glob a line.
# The construct.* commands (the plane at an angle and offset plane live in features.rs).
crates/engine/src/cmd/construct.rs
crates/engine/src/cmd/features.rs
# How a construction reference resolves, and the planes the document resolves.
crates/doc/src/construct.rs
crates/doc/src/document.rs
-3
View File
@@ -1,9 +1,6 @@
# Source files whose change must rerun the frames area (frame members, inserted profiles).
apps/solidcraft-cli/src/kernel_cases.rs
crates/doc/src/eval_frame.rs
crates/doc/src/frame.rs
crates/engine/src/cmd/frame.rs
crates/engine/src/cmd/sketch.rs
crates/kernel/src/**
crates/smlib/**
tests/kernel-cases/frames/**
-2
View File
@@ -11,7 +11,5 @@ crates/doc/src/config_rules.rs
crates/doc/src/params.rs
crates/doc/src/expr.rs
# Rebuilding the timeline, and the results it keeps between rebuilds.
crates/doc/src/eval.rs
crates/doc/src/model_cache.rs
# The cases themselves.
tests/kernel-cases/history/**
-3
View File
@@ -10,11 +10,8 @@ crates/engine/src/cmd/compare.rs
crates/engine/src/cmd/inspect.rs
# What they measure with: the comparison of two surfaces, a face's isocurves, seam continuity,
# body distance and mass properties.
crates/geom/src/compare.rs
crates/doc/src/eval.rs
crates/kernel/src/iso.rs
crates/kernel/src/continuity.rs
crates/kernel/src/continuity_order.rs
crates/kernel/src/distance.rs
crates/kernel/src/measure.rs
tests/kernel-cases/inspect/**
@@ -5,32 +5,32 @@
"method": "box 40 x 30 x 20 with a corner at the origin (V 24000 at (20,15,10)) and a cylinder r 5, h 10 on (60,0,0) (V 250 pi = 785.40 at (60,0,5)): the volume-weighted mean (21.2675, 14.5247, 9.8416), V = 24000 + 250 pi",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/center",
"value": [
"json": [
21.267517524987444,
14.524680928129708,
9.84156030937657
]
},
{
"command": 2,
"step": 3,
"pointer": "/volume",
"value": 24785.398163397447
"json": 24785.398163397447
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/1/center",
"value": [
"json": [
60,
0,
5
]
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/1/volume",
"value": 785.3981633974482
"json": 785.3981633974482
}
]
}
@@ -5,18 +5,18 @@
"method": "box 40 x 30 x 20 with a corner at the origin: the middle (20,15,10), V = 40 x 30 x 20 = 24000",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/center",
"value": [
"json": [
20,
15,
10
]
},
{
"command": 1,
"step": 2,
"pointer": "/volume",
"value": 24000.0
"json": 24000.0
}
]
}
@@ -5,38 +5,38 @@
"method": "spheres r 5 on (0,0,0) and (20,0,0): 20 - 5 - 5 = 10 apart, from (5,0,0) to (15,0,0)",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/overlaps",
"value": []
"json": []
},
{
"command": 2,
"step": 3,
"pointer": "/near/0/a",
"value": "A"
"json": "A"
},
{
"command": 2,
"step": 3,
"pointer": "/near/0/b",
"value": "B"
"json": "B"
},
{
"command": 2,
"step": 3,
"pointer": "/near/0/distance_mm",
"value": 10.0
"json": 10.0
},
{
"command": 2,
"step": 3,
"pointer": "/near/0/from",
"value": [
"json": [
5,
0,
0
]
},
{
"command": 2,
"step": 3,
"pointer": "/near/0/to",
"value": [
"json": [
15,
0,
0
@@ -5,14 +5,14 @@
"method": "spheres r 5 on (0,0,0) and (8,0,0): the lens pi (4r + d)(2r - d)^2 / 12 = pi 28 4 / 12 = 29.3215, centred on (4,0,0)",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/overlaps/0/volume_mm3",
"value": 29.321531433504735
"json": 29.321531433504735
},
{
"command": 2,
"step": 3,
"pointer": "/overlaps/0/center",
"value": [
"json": [
4,
0,
0
@@ -5,14 +5,14 @@
"method": "spheres r 5 on (0,0,0) and (20,0,0) are 10 apart; closer than 5 asked: none",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/overlaps",
"value": []
"json": []
},
{
"command": 2,
"step": 3,
"pointer": "/near",
"value": []
"json": []
}
]
}
@@ -5,19 +5,19 @@
"method": "boxes 40 x 30 x 20 on the same corner: identical, no region, B - A = 0",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/identical",
"value": true
"json": true
},
{
"command": 2,
"step": 3,
"pointer": "/regions",
"value": []
"json": []
},
{
"command": 2,
"step": 3,
"pointer": "/difference/volume_mm3",
"value": 0.0
"json": 0.0
}
]
}
@@ -5,49 +5,49 @@
"method": "box A 40 x 30 x 20 and B 40 x 30 x 25 on the same corner: B - A is the slab z 20..25, V 6000, only in B, at most 5 from A",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/a/volume_mm3",
"value": 24000.0
"json": 24000.0
},
{
"command": 2,
"step": 3,
"pointer": "/b/volume_mm3",
"value": 30000.0
"json": 30000.0
},
{
"command": 2,
"step": 3,
"pointer": "/difference/volume_mm3",
"value": 6000.0
"json": 6000.0
},
{
"command": 2,
"step": 3,
"pointer": "/identical",
"value": false
"json": false
},
{
"command": 2,
"step": 3,
"pointer": "/regions/0/side",
"value": "only_in_b"
"json": "only_in_b"
},
{
"command": 2,
"step": 3,
"pointer": "/regions/0/volume_mm3",
"value": 6000.0
"json": 6000.0
},
{
"command": 2,
"step": 3,
"pointer": "/only_in_b/volume_mm3",
"value": 6000.0
"json": 6000.0
},
{
"command": 2,
"step": 3,
"pointer": "/only_in_a/volume_mm3",
"value": 0.0
"json": 0.0
},
{
"command": 2,
"step": 3,
"pointer": "/deviation/max_mm",
"value": 5.0
"json": 5.0
}
]
}
@@ -5,29 +5,29 @@
"method": "box 40 x 30 x 20 with a corner at the origin: the faces y = 0 and z = 0 meet at 90 deg along their edge: g0, sharp, normal angle 90",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/summary/edges",
"value": 1
"json": 1
},
{
"command": 1,
"step": 2,
"pointer": "/bodies/0/edges/0/order",
"value": "g0"
"json": "g0"
},
{
"command": 1,
"step": 2,
"pointer": "/bodies/0/edges/0/verdict",
"value": "sharp"
"json": "sharp"
},
{
"command": 1,
"step": 2,
"pointer": "/bodies/0/edges/0/normal_angle_deg/value",
"value": 90.0
"json": 90.0
},
{
"command": 1,
"step": 2,
"pointer": "/bodies/0/edges/0/gap_mm/value",
"value": 0.0,
"json": 0.0,
"rel": 1e-06
}
]
@@ -5,39 +5,39 @@
"method": "box 40 x 30 x 20 with a corner at the origin, its top-front edge (y 0, z 20) rounded r 3: the round meets the top (at y 3) and the front (at z 17) tangent, curvature jumping 0 to 1/3: g1, jump 1/3 per mm",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/summary/edges",
"value": 2
"json": 2
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/0/order",
"value": "g1"
"json": "g1"
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/1/order",
"value": "g1"
"json": "g1"
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/0/curvature_jump_per_mm/value",
"value": 0.3333333333333333
"json": 0.3333333333333333
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/1/curvature_jump_per_mm/value",
"value": 0.3333333333333333
"json": 0.3333333333333333
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/0/verdict",
"value": "curvature_jump"
"json": "curvature_jump"
},
{
"command": 2,
"step": 3,
"pointer": "/bodies/0/edges/1/verdict",
"value": "curvature_jump"
"json": "curvature_jump"
}
]
}
@@ -5,24 +5,24 @@
"method": "circle r 7: curvature 1/7 everywhere, radius 7; a line: straight, no radius",
"results": [
{
"command": 4,
"step": 5,
"pointer": "/combs/0/min_radius",
"value": 7.0
"json": 7.0
},
{
"command": 4,
"step": 5,
"pointer": "/combs/0/max_curvature",
"value": 0.14285714285714285
"json": 0.14285714285714285
},
{
"command": 4,
"step": 5,
"pointer": "/combs/1/min_radius",
"value": null
"json": null
},
{
"command": 4,
"step": 5,
"pointer": "/combs/1/max_curvature",
"value": 0.0
"json": 0.0
}
]
}
@@ -5,14 +5,14 @@
"method": "a cylinder r 5 on (60,0,0): its top edge is a circle of r 5, curvature 1/5",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/combs/0/min_radius",
"value": 5.0
"json": 5.0
},
{
"command": 1,
"step": 2,
"pointer": "/combs/0/max_curvature",
"value": 0.2
"json": 0.2
}
]
}
@@ -5,19 +5,19 @@
"method": "box 40 x 30 x 20 with a corner at the origin and a box 10 x 10 x 10 from (5,5,5) inside it: the overlap is the small box: V 1000, centre (10,10,10)",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/count",
"value": 1
"json": 1
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/volume_mm3",
"value": 1000.0
"json": 1000.0
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/center",
"value": [
"json": [
10,
10,
10
@@ -5,14 +5,14 @@
"method": "box 40 x 30 x 20 with a corner at the origin and a box 40 x 30 x 20 from (40,0,0): they share the face x = 40 and no volume: no interference",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/count",
"value": 0
"json": 0
},
{
"command": 2,
"step": 3,
"pointer": "/interferences",
"value": []
"json": []
}
]
}
@@ -5,42 +5,42 @@
"method": "box 40 x 30 x 20 with a corner at the origin and a box 40 x 30 x 20 from (30,20,10): they share the cube x 30..40, y 20..30, z 10..20: V 1000, A 600, centre (35,25,15)",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/count",
"value": 1
"json": 1
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/volume_mm3",
"value": 1000.0
"json": 1000.0
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/area_mm2",
"value": 600.0
"json": 600.0
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/center",
"value": [
"json": [
35,
25,
15
]
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/bbox/min",
"value": [
"json": [
30,
20,
10
]
},
{
"command": 2,
"step": 3,
"pointer": "/interferences/0/bbox/max",
"value": [
"json": [
40,
30,
20
@@ -5,24 +5,24 @@
"method": "cube 40 with a corner at the origin: its top is the plane z = 40, 0..40 each way; 3 curves each way, evenly spaced, are x = 10, 20, 30 and y = 10, 20, 30: 3 u-curves and 3 v-curves",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/faces/0/body",
"value": "Cube"
"json": "Cube"
},
{
"command": 1,
"step": 2,
"pointer": "/faces/0/count",
"value": 3
"json": 3
},
{
"command": 1,
"step": 2,
"pointer": "/faces/0/u_curves",
"value": 3
"json": 3
},
{
"command": 1,
"step": 2,
"pointer": "/faces/0/v_curves",
"value": 3
"json": 3
}
]
}
@@ -5,9 +5,9 @@
"method": "box 40 x 30 x 20 with a corner at the origin: every face is flat: no radius (null)",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/min_radius",
"value": null
"json": null
}
]
}
@@ -5,9 +5,9 @@
"method": "a cylinder r 5 on (60,0,0): its top edge is a circle of r 5",
"results": [
{
"command": 1,
"step": 2,
"pointer": "/min_radius",
"value": 5.0
"json": 5.0
}
]
}
@@ -5,9 +5,9 @@
"method": "box 40 x 30 x 20 with a corner at the origin, its top-front edge (y 0, z 20) rounded r 3: the flat faces have none, the round is a cylinder of r 3: the smallest radius is 3",
"results": [
{
"command": 2,
"step": 3,
"pointer": "/min_radius",
"value": 3.0
"json": 3.0
}
]
}
@@ -5,9 +5,9 @@
"method": "ellipse a 10, b 4: tightest at the ends of the major axis, b^2 / a = 1.6, at (+-10, 0)",
"results": [
{
"command": 3,
"step": 4,
"pointer": "/min_radius",
"value": 1.6
"json": 1.6
}
]
}
-8
View File
@@ -4,17 +4,9 @@ crates/engine/src/cmd/plastic.rs
crates/doc/src/plastic.rs
# The features' evaluation (plastic_eval and its helpers) and the join and cut they apply.
crates/doc/src/eval_more.rs
crates/doc/src/eval.rs
# The kernel operations they build with: extrude, tapered extrude, the lip's raised band and the
# groove's rim band, booleans (ops) and the shell the lip cases
# start from, and SMLib underneath.
crates/kernel/src/build.rs
crates/kernel/src/lip.rs
crates/kernel/src/ops.rs
crates/kernel/src/boolean_record.rs
crates/kernel/src/native.rs
crates/kernel/src/shell_groups.rs
crates/smlib/**
# The cases and the rig itself.
tests/kernel-cases/plastic/**
apps/solidcraft-cli/src/kernel_cases.rs
+2
View File
@@ -13,3 +13,5 @@ crates/engine/src/cmd/sheet.rs
crates/kernel/src/offset_backend.rs
crates/kernel/src/polyhedron.rs
crates/kernel/src/sew.rs
crates/doc/src/eval_more.rs
crates/io/src/dxf_out.rs
-5
View File
@@ -1,9 +1,4 @@
# Source files whose change must rerun the solids area (cones, scale, align, bounding solids).
apps/solidcraft-cli/src/kernel_cases.rs
crates/doc/src/eval.rs
crates/doc/src/eval_more.rs
crates/engine/src/cmd/features.rs
crates/engine/src/cmd/features_more.rs
crates/kernel/src/**
crates/smlib/**
tests/kernel-cases/solids/**
-7
View File
@@ -6,7 +6,6 @@ crates/engine/src/cmd/surface_match.rs
crates/engine/src/params.rs
# Their evaluation.
crates/doc/src/eval_surface.rs
crates/doc/src/eval.rs
# The kernel code they call.
crates/kernel/src/boundary.rs
crates/kernel/src/boundary_network.rs
@@ -15,7 +14,6 @@ crates/kernel/src/fair.rs
crates/kernel/src/fill*.rs
crates/kernel/src/loft*.rs
crates/kernel/src/matchsurf.rs
crates/kernel/src/native.rs
crates/kernel/src/surface_extend.rs
crates/kernel/src/surface_offset.rs
crates/kernel/src/surface_ruled.rs
@@ -23,10 +21,5 @@ crates/kernel/src/surface_trim.rs
crates/kernel/src/surface_untrim.rs
crates/kernel/src/surfaces.rs
crates/kernel/src/sweep*.rs
crates/kernel/src/smlib_sweeps.rs
crates/geom/src/fill*.rs
crates/geom/src/network*.rs
# SMLib and the rig itself.
crates/smlib/**
apps/solidcraft-cli/src/kernel_cases.rs
tests/kernel-cases/surfaces/**
@@ -0,0 +1,26 @@
{
"sources": [],
"what": "a line extruded symmetric 10 as a surface with the legacy per-side convention: 10 each way",
"source": "analytic",
"method": "convention legacy_per_side gives the distance on each side: the plane y = 0, x 0..10, z -10..10, area 200, 4 free edges",
"valid": false,
"body_count": 1,
"faces": 1,
"boundary_edges": 4,
"area_mm2": 200.0,
"surface_types": [
"plane"
],
"bbox": {
"min": [
0,
0,
-10
],
"max": [
10,
0,
10
]
}
}
@@ -0,0 +1,60 @@
{
"commands": [
{
"command": "sketch.create",
"params": {
"plane": {
"origin": [
0,
0,
0
],
"x_dir": [
1,
0,
0
],
"y_dir": [
0,
1,
0
]
},
"name": "S"
}
},
{
"command": "sketch.line",
"params": {
"points": [
[
0,
0
],
[
10,
0
]
],
"infer": false
}
},
{
"command": "sketch.finish",
"params": {}
},
{
"command": "surface.extrude",
"params": {
"sketch": "S",
"curves": [
"l1"
],
"distance": 10,
"direction": "symmetric",
"body_name": "Wall",
"convention": "legacy_per_side"
}
}
]
}
@@ -1,13 +1,13 @@
{
"sources": [],
"what": "a line extruded symmetric 10 as a surface: surface.extrude's distance is per side (its legacy convention, kept by default), so 10 each way",
"what": "a line extruded symmetric 10 as a surface with no convention: the total, 5 each side of the sketch plane, as for a solid extrude (#9091)",
"source": "analytic",
"method": "surface.extrude without `convention` keeps legacy_per_side (crates/engine/src/cmd/features.rs, extrude_convention_tests): the plane y = 0, x 0..10, z -10..10, area 200, 4 free edges",
"method": "surface.extrude without `convention` reads the distance as the total (default_extrude_convention): the plane y = 0, x 0..10, z -5..5, area 100, 4 free edges",
"valid": false,
"body_count": 1,
"faces": 1,
"boundary_edges": 4,
"area_mm2": 200.0,
"area_mm2": 100.0,
"surface_types": [
"plane"
],
@@ -15,12 +15,12 @@
"min": [
0,
0,
-10
-5
],
"max": [
10,
0,
10
5
]
}
}