Known-failing tests at solidcore 8ddce9016
Five tests fail at the new pin and are listed with their causes: the variable round along a box edge (status 1001, twice), the shell of a fully rounded box past its rounds' radius (SM_ERR_INVALID_INPUT), the chamfer that would grow the part (no face instead of the too-large refusal) and the box-edge round's wire record. The tabbed plate's outer loop with a partial selection passes and leaves the list; issue2422's vertical edge now fails as a smooth edge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
1 parent
61f07fb294
commit
25fba581bd
1 file changed
+6
-2
@@ -22,14 +22,18 @@ solidcraft-engine::measure_centre_tests::a_fillet_round_a_boss_reports_its_radiu
|
||||
solidcraft-engine::tests::chord_and_variable_fillets its 2 → 4 → 2 waist: solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
||||
solidcraft-engine::tests::fillet_fit_taper_closes_to_a_point fillet status 1001 on the taper fit (radius 16 closing to 0), as on C++
|
||||
solidcraft-engine::tests::mirror_placed::dragging_a_mirrored_part_meshes_its_copies_once a copy of a copy drawn from its first copy's triangles (#10101) is triangulated differently from a fresh mesh of it, where truck's meshes are the same under a rigid move, as on SMLib
|
||||
solidcraft-engine::tests::shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls the 2 mm shell of the box with every edge rounded r 1.5, its front face open, fails SM_ERR_INVALID_INPUT at solidcore 8ddce9016: the wall is thicker than the rounds and their Ball corners (BallPatch, fillet_blend_corner), whose inward offsets collapse
|
||||
solidcraft-kernel::blend::corner_tests::a_round_ending_in_an_earlier_round_matches_both_together fillet status 1001 on the round that ends in the earlier one, as on C++
|
||||
solidcraft-kernel::blend::corner_tests::corner_blends_hold_at_any_scale at 0.01x the arc case's rounds remove 72.783 (scaled back) against 72.713 at 1x, as on C++
|
||||
solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds the check refuses the fillet: edge and vertex tolerance 0.97 against the body's 0.01, as on C++ (#2422)
|
||||
solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds the vertical edge after the separate bottom rounds is refused as smooth ("its faces meet tangentially, so there is nothing to round"): the rounds leave it tangent at solidcore 8ddce9016
|
||||
solidcraft-kernel::blend_corner::tests::three_rounds_at_a_corner the corner's variable-radius transition between rounds of different radii meets its neighbours at 0.144 degrees once its sections are the balls' touch circles (fillet_gn_section_generator, solidcore#2262; 0 with the great circles), as on SMLib d01d7b0; the corner step replaces that transition
|
||||
solidcraft-kernel::blend_variable::tests::variable_radius_on_a_box_edge the variable round r 2 to 5 along a box edge fails status 1001 at solidcore 8ddce9016
|
||||
solidcraft-kernel::blend_variable::tests::variable_radius_with_a_corner_through_a_middle_point solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
||||
solidcraft-kernel::blend_wrong_way_tests::a_chamfer_that_would_grow_the_part_on_a_convex_edge_is_refused at solidcore 8ddce9016 the 0.5 chamfer of the ball cut's rim is no longer refused as too large: the session builds no face (made no change), its tangent chain running into an unblended edge
|
||||
solidcraft-kernel::corner_g2::tests::a_long_setback_keeps_the_g2_patch_inside_the_box at set backs 11 to 15 the G2 corner patch bulges past the box, as on C++
|
||||
solidcraft-kernel::corner_g2::tests::curvature_rounds_meet_at_a_g2_corner the corner between curvature rounds jumps 2.07 in curvature over 538 stations on solidcore; the test wants it curvature continuous, as SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 builds it
|
||||
solidcraft-kernel::corner_g2::tests::the_box_corner_g2_patch_is_a_closed_solid_curvature_continuous_to_its_neighbours the fitted G2 corner patch bulges 1.7e-5 past the box, as on C++
|
||||
solidcraft-kernel::fillet_setback_tests::a_setback_not_past_the_radius_is_refused_naming_the_least solidcore builds setback 5.5 (15 faces) where SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 refuses it naming the least that builds; nothing names the least setback on solidcore until then
|
||||
solidcraft-kernel::tests::fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole the R25 rim and a corner arc round together since solidcore#2223, but the two R2 corner arcs picked together fail 1001 in trim_at_creases (cliff_overflow with the crease trims off), though each builds alone (solidcore#2314)
|
||||
solidcraft-kernel::modify_history_tests::fillet_variable_and_chord the variable round r 2 to 5 along the cube's edge fails status 1001 at solidcore 8ddce9016, as variable_radius_on_a_box_edge
|
||||
solidcraft-kernel::native::tests::box_and_fillet_have_stable_wire_records the box-edge round's wire record differs from the fixture at solidcore 8ddce9016 (a value 3 is 5): the fixture is re-blessed (NATIVE_BREP_BLESS=1) once the change is shown right
|
||||
solidcraft-smlib::ops::tests::a_variable_round_with_a_corner_in_its_law_is_its_balls_union solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
||||
Reference in new issue
Block a user