Files
solidcraft/crates/kernel/src/coplanar_tests.rs
T
dc38349cbf Layer split stage 1: the B-rep record, native body file and Vec/Plane come from solidcore-record (#11496)
* Kernel: the B-rep record and the native body file come from solidcore-record

SolidCraft's portable B-rep record (`solidcraft_geom::brep`: brep.rs, topology, history,
envelope, part, curve2) and the native body file (`solidcraft_kernel::native`: the tagged binary
codec and the container) move to solidcore's `solidcore-record` crate: geometry as data, with
structural validation and no maths (solidcore's docs/layers.md, stage 1). Every caller uses
`solidcore_record::brep` and `solidcore_record::native`; the old copies are deleted.

What computes from coordinates stays with the kernel, in geom's `brep`:
- `brep::check`: the record's geometric checks (orthonormal frames, non-degenerate planes,
  unit revolution axes, non-singular placements). `check::validate` and
  `check::validate_built` are the record's validation and these together, and every caller of
  `Brep::validate` uses them, so what is accepted is unchanged;
- `brep::label`: a surface's natural ranges (a cone's apex), `curve_interval`,
  `edge_curve_interval` and `form_turns`;
- `brep::pcurve::eval`: a pcurve's point;
- `geometry::check`, `placement::moved` and `split_edges` become functions on the record.

The kernel's native module keeps the conversion between a body and its saved record
(metadata.rs) and checks the decoded record's geometry. `native/analytic.rs`, which no module
declared, is deleted.

solidcore-record is pinned to its rev on solidcore's `layer-record` branch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

* Geometry: Vec2, Vec3, Plane and the profile types come from solidcore-record

The plain data of vectors and points, sketch planes and planar profiles (`Seg2`, `Loop2`,
`Region2`) moves to `solidcore-record`, with its constants and component-wise operators only
(owner decision, solidcore layer split). Their geometry stays in geom as traits:
`Vec2Geom`, `Vec3Geom`, `PlaneGeom`, `Seg2Geom`, `Loop2Geom`, `Region2Geom`, `Seg2ArcFit`,
`Loop2ArcFit` and `Region2ArcFit`, in scope with `use solidcraft_geom::prelude::*`. Every caller
names the types from `solidcore_record`; geom no longer defines or re-exports them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

* Kernel: pin solidcore-record to solidcore main f5e8e9a29

solidcore-record is merged on solidcore main (tangency-labs/solidcore#2519); its crate there is
identical to the rev pinned before but for its clippy configuration. The lock is regenerated
against the merged rev.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:04:26 -05:00

116 lines
6.0 KiB
Rust

//! Booleans of bodies with faces in a common plane. Every expected volume is what the two bodies
//! define.
#![allow(clippy::unwrap_used, clippy::panic)]
use crate::*;
use solidcore_record::Vec3;
/// An l x w x h block with two bottom edges chamfered by 1 mm: no prism along any axis, so
/// its booleans are not done on sections.
fn block(l: f64, w: f64, h: f64) -> Body {
let b = box_solid(Vec3::ZERO, Vec3::new(l, w, h)).unwrap();
let b = chamfer(&b, &[Vec3::new(l / 2.0, w, 0.0)], 1.0).unwrap();
chamfer(&b, &[Vec3::new(l, w / 2.0, 0.0)], 1.0).unwrap()
}
/// A 200 x 100 x 20 block with a rib across it: 20 wide over the block's 100, from the top
/// face z = 20 up to z = 30.
fn ribbed() -> Body {
let rib = box_solid(Vec3::new(90.0, 0.0, 20.0), Vec3::new(110.0, 100.0, 30.0)).unwrap();
boolean(&block(200.0, 100.0, 20.0), &rib, BoolOp::Union).unwrap().unwrap()
}
/// A channel along that block, longer than its 200: y 30 to 70 and z 10 to 20, so its top
/// lies in the plane of the face the rib stands on.
fn channel() -> Body {
box_solid(Vec3::new(-20.0, 30.0, 10.0), Vec3::new(220.0, 70.0, 20.0)).unwrap()
}
/// What the boolean of `a` and `b` adds to a's volume, and the result's lumps.
fn change(a: &Body, b: &Body, op: BoolOp) -> (f64, usize) {
let r = boolean(a, b, op).unwrap().unwrap();
(measure(&r).unwrap().volume - measure(a).unwrap().volume, r.lumps().unwrap().len())
}
/// A channel cut along a block, up to the face a rib stands on. The channel's top lies in
/// that face's plane and the rib bridges it.
#[test]
fn a_cut_up_to_a_face_leaves_what_stands_on_the_face() {
let (added, lumps) = change(&ribbed(), &channel(), BoolOp::Cut);
// It takes 200 x 40 x 10 of the block and nothing of the rib.
assert!((added + 80_000.0).abs() < 1e-6 && lumps == 1, "{added}, {lumps} lumps");
}
/// The same with a round hole through the block beside the channel (r 4 at 30, 15: y 11 to
/// 19, the channel from 30 on). The body no longer has planar faces only, but the hole lies
/// clear of the tool, and the cut stays what the channel is.
#[test]
fn a_round_hole_beside_the_cut_changes_nothing() {
let hole = cylinder(Vec3::new(30.0, 15.0, -1.0), Vec3::Z, 4.0, 22.0).unwrap();
let drilled = boolean(&ribbed(), &hole, BoolOp::Cut).unwrap().unwrap();
let (added, lumps) = change(&drilled, &channel(), BoolOp::Cut);
// 200 x 40 x 10 again (the hole is measured on its mesh, before and after).
assert!((added + 80_000.0).abs() < 1e-3 && lumps == 1, "{added}, {lumps} lumps");
}
/// A pocket whose top lies in the plane of the block's top face, and a pad whose foot does.
#[test]
fn faces_in_a_common_plane_cut_and_join() {
let block = block(200.0, 100.0, 20.0);
// A pocket 50 x 60 x 5 from the top face: 15 000 less.
let pocket = box_solid(Vec3::new(75.0, 20.0, 15.0), Vec3::new(125.0, 80.0, 20.0)).unwrap();
let (added, _) = change(&block, &pocket, BoolOp::Cut);
assert!((added + 15_000.0).abs() < 1e-6, "{added}");
// A pad 50 x 60 x 10 on the top face: 30 000 more.
let pad = box_solid(Vec3::new(75.0, 20.0, 20.0), Vec3::new(125.0, 80.0, 30.0)).unwrap();
let (added, lumps) = change(&block, &pad, BoolOp::Union);
assert!((added - 30_000.0).abs() < 1e-6 && lumps == 1, "{added}");
}
/// A disc joined into a round hole it fills (issue: "boolean Union: no result" for a 1 mm
/// floor extruded into a through hole of a part that isn't a prism). The disc's wall lies on
/// the hole's, and at either end its face lies in the block's bottom or top face: it adds its
/// own volume, the block stays one piece, and the hole is closed where the disc is.
#[test]
fn a_disc_joined_into_the_hole_it_fills() {
let hole = cylinder(Vec3::new(150.0, 50.0, -1.0), Vec3::Z, 20.0, 22.0).unwrap();
let drilled = boolean(&block(200.0, 100.0, 20.0), &hole, BoolOp::Cut).unwrap().unwrap();
for (z0, z1) in [(0.0, 1.0), (5.0, 8.0), (19.0, 20.0)] {
let disc = cylinder(Vec3::new(150.0, 50.0, z0), Vec3::Z, 20.0, z1 - z0).unwrap();
let want = measure(&disc).unwrap().volume;
let r = boolean(&drilled, &disc, BoolOp::Union).unwrap().unwrap();
let added = measure(&r).unwrap().volume - measure(&drilled).unwrap().volume;
assert!((added - want).abs() < want * 1e-3, "{z0}..{z1}: {added} vs {want}");
assert!(r.lumps().unwrap().len() == 1 && r.validity().is_empty(), "{z0}..{z1}: {:?}", r.validity());
}
}
/// A hemisphere of radius `r` standing on the plane z = 0.
fn hemisphere(r: f64) -> Body {
let ball = sphere(Vec3::ZERO, r).unwrap();
let below = box_solid(Vec3::new(-2.0 * r, -2.0 * r, -2.0 * r), Vec3::new(2.0 * r, 2.0 * r, 0.0)).unwrap();
boolean(&ball, &below, BoolOp::Cut).unwrap().unwrap()
}
/// A hemisphere (r 20) and a block (x 5 to 35, y -30 to 30, z 0 to 25) that both stand on z = 0, the block's foot over most of the
/// hemisphere's flat face. The block takes the part of the dome beyond x = 5, half of a cap 15 high: the union is the dome and the
/// block less that part.
#[test]
fn a_block_flush_with_the_flat_face_of_a_hemisphere_joins_exactly() {
let (r, x0) = (20.0, 5.0);
let block = box_solid(Vec3::new(x0, -30.0, 0.0), Vec3::new(35.0, 30.0, 25.0)).unwrap();
let dome = hemisphere(r);
let h = r - x0;
let expected = 2.0 / 3.0 * std::f64::consts::PI * r.powi(3) - std::f64::consts::PI * h * h * (3.0 * r - h) / 6.0 + 30.0 * 60.0 * 25.0;
for (a, b) in [(&dome, &block), (&block, &dome)] {
let joined = boolean(a, b, BoolOp::Union).unwrap().unwrap();
let v = measure(&joined).unwrap().volume;
assert!((v - expected).abs() < expected * 1e-4, "{v} against {expected}");
assert_eq!(joined.lumps().unwrap().len(), 1);
assert!(joined.validity().is_empty(), "{:?}", joined.validity());
// The flat faces are one plane again: nothing of the join stays below z = 0.
let mesh = joined.mesh(&crate::MeshTolerance::chord(0.05)).unwrap();
let lowest = mesh.positions.iter().map(|p| p.z).fold(f64::MAX, f64::min);
assert!(lowest > -1e-6, "the join reaches down to z = {lowest}");
}
}