2822, 3952 and 4149 cut long modelled threads into filleted or revolved bodies; each takes minutes on today's kernel, so they get timeout_s 600 instead of the default 180. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
33 lines
1.5 KiB
JSON
33 lines
1.5 KiB
JSON
{
|
|
"sources": [
|
|
"tangency-labs/solidcraft#2822"
|
|
],
|
|
"what": "a modelled M3 thread in a hole through a block whose vertical edges are rounded (the fillets showed as black lines after the thread)",
|
|
"source": "analytic",
|
|
"method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Cube 20x20x10 with its four vertical edges rounded R2: each removes (1 - pi/4) R^2 x 10 = 8.5841, total 34.3363. A 2.5 mm through hole (the M3 tap drill, rho=1.25) with M3 (P=0.5) over the whole 10 mm (20 turns): V = 4000 - 34.3363 - pi 1.25^2 10 - 20 x 0.43729 = 3907.8305 mm3. By symmetry COM = (10,10,5). Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
|
|
"outcome": "solid",
|
|
"body_count": 1,
|
|
"volume_mm3": 3907.8305,
|
|
"center_of_mass": [
|
|
10,
|
|
10,
|
|
5
|
|
],
|
|
"tolerance": {
|
|
"rel": 0.01
|
|
},
|
|
"bbox": {
|
|
"min": [
|
|
0,
|
|
0,
|
|
0
|
|
],
|
|
"max": [
|
|
20,
|
|
20,
|
|
10
|
|
]
|
|
},
|
|
"timeout_s": 600
|
|
}
|