ISO 4753's chamfered end bounds the end's diameter by the minor diameter. The default took the modelled root (the basic d1) for it, so the cone's small circle lay on the root cylinder and the chamfer ring pinched to nothing wherever the groove reached the end. The default is now the external minor diameter d3 = d - 1.226869 P of ISO 724, below d1: the cone crosses the root, each end is a whole disk of d3 inside a whole conical ring. ISO 4753 is for ISO metric threads; the other forms, whose root is already their design minor, give chamfer_depth. Ladder 06/017's analytic volume follows (1945.354522563); its golden entry re-measured. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
12 lines
1022 B
JSON
12 lines
1022 B
JSON
{
|
|
"sources": [],
|
|
"what": "001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the external minor diameter d3, cut after the groove",
|
|
"source": "analytic",
|
|
"method": "ISO 68-1 basic profile (60 deg, root flat P/4 at d - 5H/4 ... minor d1 = d - 1.0825 P, crest flat P/8): a helical groove of fixed section is a screw motion, so averaged over the turn every meridian half-plane holds the same section and V = 2 pi int int r m(r) dr dz over the stock's section, m the material fraction per pitch; the groove runs out past free ends. Tolerance 0.01%: SMLib's exact screw sweep; the chamfer is axisymmetric and cut after the groove, so it only lowers the stock's outer radius: r <= d_f/2 + distance from the end (45 deg), d_f the external minor diameter d3 = d - 1.226869 P = 8.160 (ISO 724; ISO 4753 chamfered end: the end's diameter at most the minor diameter), below the modelled root d1",
|
|
"body_count": 1,
|
|
"volume_mm3": 1945.354522563,
|
|
"tolerance": {
|
|
"rel": 0.0001
|
|
}
|
|
}
|