Files
solidcraft/tests/kernel-cases/ladder/06-threads/016-external-m10-left-hand/expected.json
T
jyvikoandClaude Opus 5.5 b4549d2700 Threads in the standard forms, right- or left-handed or both
Only the ISO metric 60° thread existed. Forms now (crates/doc/src/thread_forms.rs, values and
sources in docs/threads.md): ISO metric (ISO 68-1), trapezoidal (ISO 2904 design profile, ISO
2902 sizes), general purpose Acme (ASME B1.5), metric buttress 3°/30° (DIN 513), buttress inch
7°/45° (ASME B1.9 basic profile). Each has its groove as a straight-flanked polygon, its standard
sizes (none for ASME buttress), its designations (M10, M16xPh3P1.5, Tr40x14(P7), S20x4,
1/2-10 ACME, 2.5-8 BUTT) and the size that fits a face. The square thread is refused: no current
standard defines it.

`hand: right | left | both`: a left-handed groove is the screw motion about the reversed axis
rising along it; both cuts the two grooves, crossing, in one boolean. `steep_flank` turns a
buttress. The design diameters are checked against the published tables (ISO 2904/DIN 103,
DIN 513 via IS 4696-3); every form's cut against 2π∫ r w(r) dr per turn to 1e-4 in engine tests
and to 1e-4 in ladder 06/011 to 016 (they measure within 5e-7).

FeatureKind::Thread holds every option the command has (form, hand, starts, ease_in, ease_out,
tip, chamfer_angle, chamfer_depth, steep_flank, all defaulted so saved threads load unchanged);
starts, runouts and the chamfered tip are refused as not built yet. suggested_thread_in takes the
form.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:52 -04:00

12 lines
689 B
JSON

{
"sources": [],
"what": "001's modelled M10 thread, left-handed: the same volume, turning the other way",
"source": "analytic",
"method": "ISO 68-1 basic profile (60 deg, root flat P/4 at d - 5H/4 ... minor d1 = d - 1.0825 P, crest flat P/8): a helical groove of fixed section is a screw motion, so averaged over the turn every meridian half-plane holds the same section and V = 2 pi int int r m(r) dr dz over the stock's section, m the material fraction per pitch; the groove runs out past free ends. Tolerance 0.01%: SMLib's exact screw sweep; a mirror image of 001's groove, so the same volume",
"body_count": 1,
"volume_mm3": 1954.24591725,
"tolerance": {
"rel": 0.0001
}
}