Only the ISO metric 60° thread existed. Forms now (crates/doc/src/thread_forms.rs, values and sources in docs/threads.md): ISO metric (ISO 68-1), trapezoidal (ISO 2904 design profile, ISO 2902 sizes), general purpose Acme (ASME B1.5), metric buttress 3°/30° (DIN 513), buttress inch 7°/45° (ASME B1.9 basic profile). Each has its groove as a straight-flanked polygon, its standard sizes (none for ASME buttress), its designations (M10, M16xPh3P1.5, Tr40x14(P7), S20x4, 1/2-10 ACME, 2.5-8 BUTT) and the size that fits a face. The square thread is refused: no current standard defines it. `hand: right | left | both`: a left-handed groove is the screw motion about the reversed axis rising along it; both cuts the two grooves, crossing, in one boolean. `steep_flank` turns a buttress. The design diameters are checked against the published tables (ISO 2904/DIN 103, DIN 513 via IS 4696-3); every form's cut against 2π∫ r w(r) dr per turn to 1e-4 in engine tests and to 1e-4 in ladder 06/011 to 016 (they measure within 5e-7). FeatureKind::Thread holds every option the command has (form, hand, starts, ease_in, ease_out, tip, chamfer_angle, chamfer_depth, steep_flank, all defaulted so saved threads load unchanged); starts, runouts and the chamfered tip are refused as not built yet. suggested_thread_in takes the form. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
12 lines
705 B
JSON
12 lines
705 B
JSON
{
|
|
"sources": [],
|
|
"what": "a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block",
|
|
"source": "analytic",
|
|
"method": "groove volume per turn 2 pi int r w(r) dr over the material it cuts (Pappus on the axial section; a screw motion), w(r) = P - flat - depth (tan a + tan b); six whole turns through the block, both ends free, so V = stock - 6 x that. Tolerance 0.01%: SMLib's exact screw sweep. ISO 2904 internal: the nut's crest flat 0.366 P at D1 = d - P = 16, its root at D4 = d + 2 ac = 20.5; the groove from the bore wall r 8 out to r 10.25, w(r) = P - 0.366 P - (r - 8) 2 tan15",
|
|
"body_count": 1,
|
|
"volume_mm3": 32097.519700251,
|
|
"tolerance": {
|
|
"rel": 0.0001
|
|
}
|
|
}
|