Chamfers on boxes, plates, discs and sectors with closed-form volumes: all twelve edges in the order that was refused, a concave chamfer that adds material, a chamfer next to square openings and one that runs into them, a hole rim tangent to the bottom face, a hex hole's corner bevels, a one-pick chain on a large part, a bottom loop as wide as the corner round, two distances on a circular rim, the end outlines of a rounded prism, a chamfer over a joined pin, and the equal chamfer of a slanted plug. Spline-sided pillar (invariants only) for chamfer and fillet. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
11 lines
1.1 KiB
JSON
11 lines
1.1 KiB
JSON
{
|
|
"sources": [
|
|
"tangency-labs/solidcraft#4101"
|
|
],
|
|
"what": "the four edges of a block end face chamfered where the block sides are 1 degree off square: exact volume of the plane-clipped prism (the corner edges of about 0.0001 mm are real geometry)",
|
|
"source": "analytic",
|
|
"method": "prism over the quadrilateral (0,0),(14.8,0),(14.6,12),(0.2,12), height 6.5, convex. The chamfered body is the prism cut by 4 half-spaces, one per chamfered edge of the y=12 face: each plane passes through the edge direction and the points at distance 0.8 from the edge along each adjacent face (along the slanted side faces for the two slanted edges). V = convex polytope volume of the prism clipped by those 4 planes (exact clipping, no kernel). Faces: 6 + 4 = 10. The exact polytope has four extra edges about 0.0001 mm long, one per corner (the chamfer along a slanted side is 0.8 along that side, and 0.8 along the end face, so the neighbouring chamfers meet the bottom face at points 0.00011 mm apart): they are real geometry, so vertex and edge counts are not graded.",
|
|
"body_count": 1,
|
|
"volume_mm3": 1126.1015080310985,
|
|
"faces": 10
|
|
} |