Files
solidcraft/assets/locales/pending/continuity-g4.json
T
jyvikoandClaude Opus 5.5 1260353f48 Fillet Corners: the shared continuity control says what each corner builds
The Corners row keeps the control's words (Tangent, Curvature) and its hover text says what
each makes: a rolling-ball corner (G1), or a smooth patch set back along each edge by the
Setback, 1.5 × the radius when empty (G2). continuity_row_explained is the shared control with
a caller's hover text; the new lines are in en, ar, de, he, ja, ko and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 21:15:20 -04:00

45 lines
4.5 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"en": {
"ui.continuity_smooth_curvature_change": "Smooth curvature change",
"ui.continuity_smooth_curvature_change_tip": "Smooth curvature change (G4): even the way the curvature changes runs on smoothly across the seam.",
"ui.fillet_corner_tangent_tip": "Tangent (G1): a rolling-ball corner, a piece of the rolling ball's sphere tangent to each round.",
"ui.fillet_corner_curvature_tip": "Curvature (G2): a smooth patch. The corner is set back along each edge by the Setback (empty: {factor} × the radius) and filled with a patch, so reflections run through it without a kink."
},
"ar": {
"ui.continuity_smooth_curvature_change": "تغيّر انحناء سلس",
"ui.continuity_smooth_curvature_change_tip": "تغيّر انحناء سلس (G4): حتى طريقة تغيّر الانحناء تستمر بسلاسة عبر خط الالتقاء.",
"ui.fillet_corner_tangent_tip": "مماس (G1): زاوية بالكرة المتدحرجة، جزء من سطح الكرة المتدحرجة مماسّ لكل تقويس.",
"ui.fillet_corner_curvature_tip": "الانحناء (G2): رقعة ناعمة. تُرجَع الزاوية على طول كل حافة بمقدار الإرجاع (فارغ: {factor} ضعف نصف القطر) وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار."
},
"de": {
"ui.continuity_smooth_curvature_change": "Glatte Krümmungsänderung",
"ui.continuity_smooth_curvature_change_tip": "Glatte Krümmungsänderung (G4): Selbst die Art, wie sich die Krümmung ändert, läuft an der Naht glatt weiter.",
"ui.fillet_corner_tangent_tip": "Tangential (G1): eine Kugelecke, ein Stück der Kugel des rollenden Balls, tangential zu jeder Rundung.",
"ui.fillet_corner_curvature_tip": "Krümmung (G2): ein glattes Flächenstück. Die Ecke wird entlang jeder Kante um den Rücksprung zurückgesetzt (leer: {factor} × der Radius) und mit einem Flächenstück gefüllt, sodass Spiegelungen ohne Knick hindurchlaufen."
},
"he": {
"ui.continuity_smooth_curvature_change": "שינוי עקמומיות חלק",
"ui.continuity_smooth_curvature_change_tip": "שינוי עקמומיות חלק (G4): גם האופן שבו העקמומיות משתנה ממשיך בצורה חלקה לאורך התפר.",
"ui.fillet_corner_tangent_tip": "משיק (G1): פינת כדור מתגלגל, חלק מספירת הכדור המתגלגל, משיק לכל עיגול.",
"ui.fillet_corner_curvature_tip": "עקמומיות (G2): טלאי חלק. הפינה נסוגה לאורך כל קצה במרחק הנסיגה (ריק: פי {factor} מהרדיוס) ומתמלאת בטלאי, כך שההשתקפויות עוברות בה בלי שבר."
},
"ja": {
"ui.continuity_smooth_curvature_change": "なめらかな曲率変化",
"ui.continuity_smooth_curvature_change_tip": "なめらかな曲率変化 (G4): 境目で曲率の変わり方そのものもなめらかに続きます。",
"ui.fillet_corner_tangent_tip": "接線 (G1): 転がるボールのコーナー。転がるボールの球面の一部で、各フィレットに接します。",
"ui.fillet_corner_curvature_tip": "曲率 (G2): なめらかなパッチ。コーナーを各エッジに沿ってセットバック分 (空欄のときは半径の {factor} 倍) 後退させてパッチで埋め、映り込みが折れずに通ります。"
},
"ko": {
"ui.continuity_smooth_curvature_change": "부드러운 곡률 변화",
"ui.continuity_smooth_curvature_change_tip": "부드러운 곡률 변화(G4): 이음매에서 곡률이 변하는 방식까지 부드럽게 이어집니다.",
"ui.fillet_corner_tangent_tip": "접선(G1): 굴러가는 볼 코너. 굴러가는 볼의 구면 일부로, 각 라운드에 접합니다.",
"ui.fillet_corner_curvature_tip": "곡률(G2): 부드러운 패치. 코너를 각 모서리를 따라 셋백만큼(비워 두면 반지름의 {factor}배) 물려 패치로 채우므로, 반사가 꺾임 없이 지나갑니다."
},
"zh": {
"ui.continuity_smooth_curvature_change": "平滑曲率变化",
"ui.continuity_smooth_curvature_change_tip": "平滑曲率变化 (G4):连曲率的变化方式在接缝处也平滑延续。",
"ui.fillet_corner_tangent_tip": "相切 (G1):滚球角,滚球球面的一部分,与每个圆角相切。",
"ui.fillet_corner_curvature_tip": "曲率 (G2):平滑曲面片。角点沿每条边后退一个后退距离(留空:半径的 {factor} 倍),并用曲面片填充,反射穿过时没有折痕。"
}
}