bherbruckandClaude Opus 5.5 a043e4ae2d kernel: an SMLib blend's corner patch comes from the edges meeting there ...

SMLib leaves a corner patch where blends meet untagged, and blends() matches no single edge to
it, so it had no origin, and the edges between two blend faces (two chamfers' mitre) none
either. The history checks refused both (modify_history_tests' corner, whole-box and mitre
cases on SMLib). Now a patch without origin is made in place of all the edges of the blend
faces beside it, as truck records a corner, and every edge of a face new to the blend is where
its two faces meet.

modify_history_tests with SOLIDCRAFT_KERNEL=smlib: the three blend cases pass (28 of 30; the
painted shell and the painted box cut's pieces are the shell's and boolean's). Truck: 30 of 30.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-27 02:28:47 -04:00

..

iges_in

Stand up Y-up STEP and IGES files from SolidWorks automatically (#5191)

2026-10-23 02:53:20 +00:00

native

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

step_in

kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies

2026-10-27 02:28:47 -04:00

tess

kernel: hold every display-plan triangle to the chord tolerance

2026-10-27 02:28:46 -04:00

backend.rs

kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation

2026-10-27 02:28:47 -04:00

blend_corner.rs

kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib

2026-10-27 02:28:47 -04:00

blend_fit.rs

Fillet fit: an outside round concentric with a wall's inside round is no longer refused (#2852)

2026-10-19 16:08:37 -04:00

blend_smlib.rs

kernel: an SMLib blend's corner patch comes from the edges meeting there

2026-10-27 02:28:47 -04:00

blend_variable.rs

kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib

2026-10-27 02:28:47 -04:00

blend_vertex.rs

Fix boss-bottom blends and merged arc-corner surfaces (#1294)

2026-10-15 02:03:31 -04:00

blend_wrong_way_tests.rs

Chamfer: refuse a result that grows a convex edge's part (#1428)

2026-10-15 14:26:30 -04:00

blend.rs

kernel: chamfers with two setbacks through SMLib

2026-10-27 02:28:47 -04:00

body_lump_tests.rs

Boolean: cut around a part's sealed voids when the whole cut fails (#1570)

2026-10-15 22:18:31 -04:00

body.rs

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

boolean_diagnostics.rs

Open saved designs from the model they were saved with (#3053) (#3102)

2026-10-20 14:24:34 +00:00

boolean_guard.rs

Action matrix regressions of #1255: knuckle rounds, thin holes, a 45° flange hole, an axis after an edit (#1280)

2026-10-15 00:24:27 -04:00

boolean_history_tests.rs

kernel: solids an SMLib boolean leaves touching come back as separate solids

2026-10-27 02:28:47 -04:00

boolean_record.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

bore_guard.rs

refactor: geom::UnitVec3 for unit axes and normals (#2603)

2026-10-18 21:16:31 -04:00

bore_union_tests.rs

refactor: geom::UnitVec3 for unit axes and normals (#2603)

2026-10-18 21:16:31 -04:00

boundary_network.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

boundary_tests.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

boundary.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

bridge_tests.rs

surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)

2026-10-20 04:26:12 +00:00

bridge.rs

surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)

2026-10-20 04:26:12 +00:00

build.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

candidate_reach_tests.rs

Boolean retries: a candidate whose edges run far outside the operands is discarded unmeshed (#3020) (#3185)

2026-10-20 10:45:27 +00:00

candidate_reach.rs

Boolean retries: a candidate whose edges run far outside the operands is discarded unmeshed (#3020) (#3185)

2026-10-20 10:45:27 +00:00

chamfer_sides_curved_tests.rs

Chamfer: two distances and distance + angle on curved edges (#2893)

2026-10-19 10:14:18 -04:00

clearance.rs

fix: a cut takes only its sketch, a join adds only it (#1310)

2026-10-17 08:42:17 -04:00

coaxial_overlap.rs

inspect.clearance: pins on one cylinder with their hole are answered or reported in seconds (#3027)

2026-10-20 00:09:50 +00:00

continuity.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

coplanar_tests.rs

Join a flange flush with a bent, tapered loft's end where the retry fails (#1391) (#1556)

2026-10-15 22:19:22 -04:00

coplanar.rs

A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)

2026-10-20 04:15:37 +00:00

corner_g2_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

corner_g2.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

curveblend_law_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

curveblend_tests.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

curveblend.rs

Loft guide rails (#201) (#3371)

2026-10-20 03:22:30 +00:00

curvecorner_tests.rs

test: three ignored tests pass again and run in CI (#679, #562) (#1663)

2026-10-16 06:26:13 -04:00

curvecorner.rs

Loft guide rails (#201) (#3371)

2026-10-20 03:22:30 +00:00

delete_face.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

display_mesh_tests.rs

Display plans and the model cache for large STEP assemblies (#2814) (#4021)

2026-10-21 10:37:12 +00:00

distance.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

edge_polyline_tests.rs

Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)

2026-10-20 16:49:45 +00:00

emboss.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

empty_retry_tests.rs

Try exact local cuts after invalid empty numerical results (#1765) (#1858)

2026-10-20 03:25:02 +00:00

face_params.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

face_source_tests.rs

A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182)

2026-10-23 22:53:42 +00:00

fair.rs

perf: a copy placed for showing doesn't turn its revolved faces again (#3044) (#3104)

2026-10-20 11:01:56 +00:00

fill_general_tests.rs

Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)

2026-10-15 23:07:24 -04:00

fill.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

freeform.rs

…

fuzz.rs

…

heal.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

helix.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

history_tests.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

history.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

iges_in.rs

Stand up Y-up STEP and IGES files from SolidWorks automatically (#5191)

2026-10-23 02:53:20 +00:00

iges_out.rs

…

intersection_curve_tests.rs

Mesh edges that do not evaluate without a panic; refuse such boolean results (#1252) (#1364)

2026-10-15 11:10:55 -04:00

issue_324_tests.rs

Fillet beside a hole: the suggested largest radius fits (#324) (#1885)

2026-10-17 04:08:39 -04:00

issue_616_tests.rs

…

issue_674_tests.rs

…

issue_679_tests.rs

…

issue_788_tests.rs

refactor: geom::UnitVec3 for unit axes and normals (#2603)

2026-10-18 21:16:31 -04:00

issue_851_tests.rs

Fix boss-bottom blends and merged arc-corner surfaces (#1294)

2026-10-15 02:03:31 -04:00

issue_871_tests.rs

Fillet: refuse a result with openings in its surface (#871) (#949)

2026-10-14 01:36:30 -04:00

issue_1038_tests.rs

Intersection edges divide at 1e-6 when asked for less, instead of panicking (#4623) (#4650)

2026-10-23 13:44:56 +00:00

issue_1080_tests.rs

Fillet fit: an outside round concentric with a wall's inside round is no longer refused (#2852)

2026-10-19 16:08:37 -04:00

issue_1510_tests.rs

Split Body: a plane lying on a face of the body splits it exactly (#1510) (#1897)

2026-10-17 07:21:06 -04:00

issue_2005_tests.rs

Sweep: close circular tools before cutting a torus (#2005) (#2010)

2026-10-17 12:46:21 -04:00

join_between_caps_tests.rs

Join keeps its tool exact where the tool ends in the part's faces (#1244)

2026-10-14 20:18:09 -04:00

lib.rs

kernel: measure through SMLib's exact mass properties, checked against the mesh

2026-10-27 02:28:47 -04:00

lip.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

loft_blend_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

loft_blend.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

loft_rails_tests.rs

Loft guide rails (#201) (#3371)

2026-10-20 03:22:30 +00:00

loft_rails.rs

Loft guide rails (#201) (#3371)

2026-10-20 03:22:30 +00:00

loft_region_tests.rs

Loft: preserve holes through matching sketch sections (#2435) (#2447)

2026-10-19 23:57:07 +00:00

loopblend.rs

Chamfer: two distances and distance + angle on curved edges (#2893)

2026-10-19 10:14:18 -04:00

matchsurf_tests.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

matchsurf.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

measure_backend.rs

kernel: measure through SMLib's exact mass properties, checked against the mesh

2026-10-27 02:28:47 -04:00

measure.rs

kernel: measure through SMLib's exact mass properties, checked against the mesh

2026-10-27 02:28:47 -04:00

mesh_convert.rs

…

mesh_memo_tests.rs

inspect.clearance: mesh each body once per check instead of once per pair (#2867)

2026-10-19 16:14:24 -04:00

meshbody.rs

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

modify_history_tests.rs

kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel

2026-10-27 02:28:47 -04:00

native.rs

kernel: any schema 4 record into SMLib with its order, healed where refused

2026-10-27 02:28:47 -04:00

numbered.rs

Loft: a circle lofted to a non-star-shaped profile is split once round (#2570) (#3670)

2026-10-21 00:30:58 +00:00

offset_backend.rs

kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel

2026-10-27 02:28:47 -04:00

offset.rs

Cut: a body with a sealed void no longer comes out empty (#3175)

2026-10-20 10:30:13 +00:00

ops.rs

kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation

2026-10-27 02:28:47 -04:00

outline_tests.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

outline.rs

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

par.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

pinch_tests.rs

Cut a hole tangent inside a stepped boss (zero-thickness curved wall) (#986)

2026-10-14 03:55:06 -04:00

placement_tests.rs

…

planar_faces_tests.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_faces.rs

Join a flange flush with a bent, tapered loft's end where the retry fails (#1391) (#1556)

2026-10-15 22:19:22 -04:00

planar_regularize.rs

…

planar_sources.rs

Planar source matching looks only at planes with the same normal (#917)

2026-10-13 20:44:58 -04:00

plane_fit.rs

surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)

2026-10-20 04:26:12 +00:00

polybool.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

polyhedron.rs

kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel

2026-10-27 02:28:47 -04:00

prism_curve.rs

Sketch projection: a solid's edges come in as their exact curves (#1508)

2026-10-18 21:23:11 -04:00

prism_fast_path_tests.rs

…

prism_lineage.rs

…

prism_local.rs

Fix/clippy option zip (#1798)

2026-10-16 16:26:11 -04:00

prism_measure.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

prism_spline_tests.rs

Text cuts: the 2D prism route takes a font's curves exactly (#1429)

2026-10-15 13:32:02 -04:00

prism.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

profile.rs

Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)

2026-10-19 09:14:52 -04:00

provenance.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

record_tests.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

record.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

refine_cache_tests.rs

…

regularization_protection_tests.rs

…

seam_faces_tests.rs

Offset Face: split a periodic face off its seam first, as booleans already do (#6226) (#6227)

2026-10-25 18:49:44 +00:00

seam_faces.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

sew.rs

refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)

2026-10-20 03:44:49 +00:00

shell_groups.rs

brep: schema 4 types, validator and truck adapter

2026-10-27 02:28:44 -04:00

smlib_boolean.rs

kernel: solids an SMLib boolean leaves touching come back as separate solids

2026-10-27 02:28:47 -04:00

smlib_sweeps_tests.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

smlib_sweeps.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

smooth_edges.rs

Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)

2026-10-19 16:04:02 -04:00

sphere_lens_tests.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

sphere_lens.rs

Fix lens-profile cuts into revolved quarter spheres (#2791)

2026-10-19 10:14:12 -04:00

spline_conv.rs

Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)

2026-10-15 13:32:16 -04:00

splitface.rs

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

step_out.rs

Display plans and the model cache for large STEP assemblies (#2814) (#4021)

2026-10-21 10:37:12 +00:00

step.rs

STEP export: shelled revolved bodies export instead of panicking (#1496)

2026-10-15 22:19:10 -04:00

surface_extend.rs

Display plans and the model cache for large STEP assemblies (#2814) (#4021)

2026-10-21 10:37:12 +00:00

surface_kind.rs

Fix shelling revolved barrels (#2421) (#2486)

2026-10-19 16:09:11 -04:00

surface_offset.rs

refactor: geom::Grid for control nets; one surface fit through a grid of samples (#2331)

2026-10-19 07:39:22 -04:00

surface_ruled.rs

Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)

2026-10-14 21:44:56 -04:00

surface_second_derivative_tests.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

surface_trim.rs

Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)

2026-10-19 16:04:02 -04:00

surface_untrim.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

surfaces.rs

kernel: an SMLib body keeps each edge's and vertex's tolerance through its record

2026-10-27 02:28:47 -04:00

sweep_path.rs

kernel: extrude, revolve, sweep, loft and coil through SMLib behind SOLIDCRAFT_KERNEL

2026-10-27 02:28:47 -04:00

sweep_rails_tests.rs

Sweep guide rails and two-rail sweep (#771) (#1806)

2026-10-17 04:07:46 -04:00

tangent_cylinders.rs

brep: history types move to solidcraft_geom::brep::history

2026-10-27 02:28:44 -04:00

taper_mesh_tests.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

tests.rs

Mesh bodies: measure their size once, when made (#4662) (#4663)

2026-10-22 21:51:40 -04:00

thin_face_tests.rs

Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)

2026-10-20 16:49:45 +00:00

thread_display_tests.rs

feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799)

2026-10-16 16:26:15 -04:00

thread_tests.rs

Modelled threads: shuffle the faceted boolean's polygons before the BSP (#1250) (#1395)

2026-10-15 08:53:15 -04:00

tool_reseam.rs

Fix drilled hole cuts through tapered walls (#2387) (#2401)

2026-10-18 21:16:06 -04:00

topo.rs

refactor: geom::UnitVec3 for unit axes and normals (#2603)

2026-10-18 21:16:31 -04:00

touching_walls.rs

Booleans: prism cuts whose walls only touch the target are exact (#1894)

2026-10-17 08:00:06 -04:00

trimmed_face_mesh_tests.rs

Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031) (#5409)

2026-10-25 02:55:24 +00:00

tspline.rs

Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)

2026-10-15 13:32:16 -04:00

untouched_faces_tests.rs

Straight edges stay one edge after cuts (#1049) (#1101)

2026-10-14 10:51:07 -04:00

validity.rs

kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation

2026-10-27 02:28:47 -04:00

watch.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

whole_face_tests.rs

Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)

2026-10-21 00:41:41 +00:00

whole_face.rs

Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)

2026-10-21 00:41:41 +00:00