Files
solidcraft/docs
jyvikoandClaude Opus 5.5 95f1258b71 Motion interference: a collision is deepest where the parts share the most volume
motion.interference picked a collision's deepest step by the depth sampled
on the contact meshes (vertices, edge midpoints, triangle centres), and
worked out the exact shared volume only there. That depth depends on where
the mesh puts its points: since planes mesh as their boundary's triangles,
the arm turning into a block (rig case
assemblies/cov-motion-interference-arm-into-the-block) sampled 4.64 mm at 60
degrees and 2.0 mm at 90, and the check answered step 6 with 536 mm3. The
exact depth is 5 mm at every step from 60 to 90 degrees (both slabs are
10 mm thick), so depth cannot tell those steps apart.

The exact shared volume is now worked out at each sample a pair overlaps,
and the deepest step is the first with the most (a tie keeps the earlier
sample). The arm and block share 536, 807, 952 and 1000 mm3 at 60 to 90
degrees, so it is step 9 with 1000 mm3, at 10 samples or 19. depth_mm is
reported as before and documented as an estimate from the contact meshes.
volume_mm3 is null, and the step falls back to the sampled depth, when the
volume was not worked out at every sample (more than 16 pairs, or past the
boolean budget, raised from 64 to 256 now that it covers every sample).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:32:44 -04:00
..